From 2884fce165047db7df422e52a672970fa09c87b5 Mon Sep 17 00:00:00 2001 From: Rudolf Marek Date: Tue, 27 Jul 2010 13:18:02 -0700 Subject: [PATCH] drivers/rtc/rtc-rx8581.c: fix setdatetime Fix the logic while writing new date/time to the chip. The driver incorrectly wrote back register values to different registers and even with wrong mask. The patch adds clearing of the VLF register, which should be cleared if all date/time values are set. Signed-off-by: Rudolf Marek Acked-by: Wan ZongShun Cc: Martyn Welch Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-rx8581.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/drivers/rtc/rtc-rx8581.c b/drivers/rtc/rtc-rx8581.c index 9718aaaa8215..600b890a3c15 100644 --- a/drivers/rtc/rtc-rx8581.c +++ b/drivers/rtc/rtc-rx8581.c @@ -168,7 +168,7 @@ static int rx8581_set_datetime(struct i2c_client *client, struct rtc_time *tm) return -EIO; } - err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG, + err = i2c_smbus_write_byte_data(client, RX8581_REG_CTRL, (data | RX8581_CTRL_STOP)); if (err < 0) { dev_err(&client->dev, "Unable to write control register\n"); @@ -182,6 +182,20 @@ static int rx8581_set_datetime(struct i2c_client *client, struct rtc_time *tm) return -EIO; } + /* get VLF and clear it */ + data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG); + if (data < 0) { + dev_err(&client->dev, "Unable to read flag register\n"); + return -EIO; + } + + err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG, + (data & ~(RX8581_FLAG_VLF))); + if (err != 0) { + dev_err(&client->dev, "Unable to write flag register\n"); + return -EIO; + } + /* Restart the clock */ data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL); if (data < 0) { @@ -189,8 +203,8 @@ static int rx8581_set_datetime(struct i2c_client *client, struct rtc_time *tm) return -EIO; } - err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG, - (data | ~(RX8581_CTRL_STOP))); + err = i2c_smbus_write_byte_data(client, RX8581_REG_CTRL, + (data & ~(RX8581_CTRL_STOP))); if (err != 0) { dev_err(&client->dev, "Unable to write control register\n"); return -EIO; -- 2.30.2