From 28a1bc1c0a5a15e72afae1050b227761227b6af2 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Mon, 31 Jan 2011 21:06:38 -0800 Subject: [PATCH] Input: wacom_w8001 - report resolution to userland Serial devices send both pen and touch data through the same logical port. Since we scaled touch to pen maximum, we use pen resolution for touch as well here. This is under the assumption that pen and touch share the same physical surface. In the case when a small physical dimensional difference occurs between pen and touch, we assume the tolerance for touch point precision is higher than pen and the difference is within touch point tolerance. A per-MT tool based resolution mechanism should be introduced if the above assumption does not hold true for the pen and touch devices any more. Signed-off-by: Ping Cheng Reviewed-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/wacom_w8001.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c index 5cb8449c909d..c14412ef4648 100644 --- a/drivers/input/touchscreen/wacom_w8001.c +++ b/drivers/input/touchscreen/wacom_w8001.c @@ -51,6 +51,10 @@ MODULE_LICENSE("GPL"); #define W8001_PKTLEN_TPCCTL 11 /* control packet */ #define W8001_PKTLEN_TOUCH2FG 13 +/* resolution in points/mm */ +#define W8001_PEN_RESOLUTION 100 +#define W8001_TOUCH_RESOLUTION 10 + struct w8001_coord { u8 rdy; u8 tsw; @@ -198,7 +202,7 @@ static void parse_touchquery(u8 *data, struct w8001_touch_query *query) query->y = 1024; if (query->panel_res) query->x = query->y = (1 << query->panel_res); - query->panel_res = 10; + query->panel_res = W8001_TOUCH_RESOLUTION; } } @@ -394,6 +398,8 @@ static int w8001_setup(struct w8001 *w8001) input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0); input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0); + input_abs_set_res(dev, ABS_X, W8001_PEN_RESOLUTION); + input_abs_set_res(dev, ABS_Y, W8001_PEN_RESOLUTION); input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0); if (coord.tilt_x && coord.tilt_y) { input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0); @@ -418,14 +424,17 @@ static int w8001_setup(struct w8001 *w8001) w8001->max_touch_x = touch.x; w8001->max_touch_y = touch.y; - /* scale to pen maximum */ if (w8001->max_pen_x && w8001->max_pen_y) { + /* if pen is supported scale to pen maximum */ touch.x = w8001->max_pen_x; touch.y = w8001->max_pen_y; + touch.panel_res = W8001_PEN_RESOLUTION; } input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0); input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0); + input_abs_set_res(dev, ABS_X, touch.panel_res); + input_abs_set_res(dev, ABS_Y, touch.panel_res); switch (touch.sensor_id) { case 0: -- 2.30.2