From 28bf36f92afc6b22ba50ceaf36ba89afa9f5c1e8 Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Fri, 14 Nov 2014 10:47:29 +1100 Subject: [PATCH] powerpc/eeh: Set EEH_PE_RESET on PE reset The patch introduces additional flag EEH_PE_RESET to indicate the corresponding PE is under reset. In turn, the PE retrieval bakcend on PowerNV platform can return unfrozen state for the EEH core to moving forward. Flag EEH_PE_CFG_BLOCKED isn't the correct one for the purpose. In PCI passthrou case, the problem is more worse: Guest doesn't recover 6th EEH error. The PE is left in isolated (frozen) and config blocked state on Broadcom adapters. We can't retrieve the PE's state correctly any more, even from the host side via sysfs /sys/bus/pci/devices/xxx/eeh_pe_state. Reported-by: Rajeshkumar Subramanian Signed-off-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/eeh.h | 1 + arch/powerpc/kernel/eeh.c | 4 ++++ arch/powerpc/kernel/eeh_driver.c | 10 ++-------- arch/powerpc/platforms/powernv/eeh-ioda.c | 2 +- 4 files changed, 8 insertions(+), 9 deletions(-) diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h index ca07f9c27335..2e633b41712a 100644 --- a/arch/powerpc/include/asm/eeh.h +++ b/arch/powerpc/include/asm/eeh.h @@ -72,6 +72,7 @@ struct device_node; #define EEH_PE_ISOLATED (1 << 0) /* Isolated PE */ #define EEH_PE_RECOVERING (1 << 1) /* Recovering PE */ #define EEH_PE_CFG_BLOCKED (1 << 2) /* Block config access */ +#define EEH_PE_RESET (1 << 3) /* PE reset in progress */ #define EEH_PE_KEEP (1 << 8) /* Keep PE on hotplug */ #define EEH_PE_CFG_RESTRICTED (1 << 9) /* Block config on error */ diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c index 967e4a08d824..b372bfdbfb3a 100644 --- a/arch/powerpc/kernel/eeh.c +++ b/arch/powerpc/kernel/eeh.c @@ -760,6 +760,9 @@ int eeh_reset_pe(struct eeh_pe *pe) int flags = (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE); int i, state, ret; + /* Mark as reset and block config space */ + eeh_pe_state_mark(pe, EEH_PE_RESET | EEH_PE_CFG_BLOCKED); + /* Take three shots at resetting the bus */ for (i = 0; i < 3; i++) { eeh_reset_pe_once(pe); @@ -788,6 +791,7 @@ int eeh_reset_pe(struct eeh_pe *pe) } out: + eeh_pe_state_clear(pe, EEH_PE_RESET | EEH_PE_CFG_BLOCKED); return ret; } diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c index 6535936bdf27..b17e793ba67e 100644 --- a/arch/powerpc/kernel/eeh_driver.c +++ b/arch/powerpc/kernel/eeh_driver.c @@ -528,13 +528,11 @@ int eeh_pe_reset_and_recover(struct eeh_pe *pe) eeh_pe_dev_traverse(pe, eeh_report_error, &result); /* Issue reset */ - eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED); ret = eeh_reset_pe(pe); if (ret) { - eeh_pe_state_clear(pe, EEH_PE_RECOVERING | EEH_PE_CFG_BLOCKED); + eeh_pe_state_clear(pe, EEH_PE_RECOVERING); return ret; } - eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED); /* Unfreeze the PE */ ret = eeh_clear_pe_frozen_state(pe, true); @@ -601,19 +599,15 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus) * config accesses. So we prefer to block them. However, controlled * PCI config accesses initiated from EEH itself are allowed. */ - eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED); rc = eeh_reset_pe(pe); - if (rc) { - eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED); + if (rc) return rc; - } pci_lock_rescan_remove(); /* Restore PE */ eeh_ops->configure_bridge(pe); eeh_pe_restore_bars(pe); - eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED); /* Clear frozen state */ rc = eeh_clear_pe_frozen_state(pe, false); diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c index db3803e21483..fb38fe4dba89 100644 --- a/arch/powerpc/platforms/powernv/eeh-ioda.c +++ b/arch/powerpc/platforms/powernv/eeh-ioda.c @@ -372,7 +372,7 @@ static int ioda_eeh_get_pe_state(struct eeh_pe *pe) * moving forward, we have to return operational * state during PE reset. */ - if (pe->state & EEH_PE_CFG_BLOCKED) { + if (pe->state & EEH_PE_RESET) { result = (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE | EEH_STATE_MMIO_ENABLED | -- 2.30.2