From 2ca4231de7f7a5fd7137bac152030ba71f15e8c3 Mon Sep 17 00:00:00 2001 From: Mike McCormack Date: Sat, 23 Jan 2010 02:09:26 -0800 Subject: [PATCH] sky2: Enable/disable WOL per hardware device Y2_HW_WOL_ON/Y2_HW_WOL_OFF should be set and cleared per chip, not per port. On dual port cards, Y2_HW_WOL_ON should be enabled if either sky2 port has WOL enabled. Found while reviewing code for a WOL regression, though this is probably not the cause of the regression. Signed-off-by: Mike McCormack Signed-off-by: David S. Miller --- drivers/net/sky2.c | 29 ++++++++++++++++++++++------- 1 file changed, 22 insertions(+), 7 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 37f486b65f63..02d0b42e436c 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -3228,6 +3228,27 @@ static inline u8 sky2_wol_supported(const struct sky2_hw *hw) return sky2_is_copper(hw) ? (WAKE_PHY | WAKE_MAGIC) : 0; } +static void sky2_hw_set_wol(struct sky2_hw *hw) +{ + int wol = 0; + int i; + + for (i = 0; i < hw->ports; i++) { + struct net_device *dev = hw->dev[i]; + struct sky2_port *sky2 = netdev_priv(dev); + + if (sky2->wol) + wol = 1; + } + + if (hw->chip_id == CHIP_ID_YUKON_EC_U || + hw->chip_id == CHIP_ID_YUKON_EX || + hw->chip_id == CHIP_ID_YUKON_FE_P) + sky2_write32(hw, B0_CTST, wol ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF); + + device_set_wakeup_enable(&hw->pdev->dev, wol); +} + static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { const struct sky2_port *sky2 = netdev_priv(dev); @@ -3247,13 +3268,7 @@ static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) sky2->wol = wol->wolopts; - if (hw->chip_id == CHIP_ID_YUKON_EC_U || - hw->chip_id == CHIP_ID_YUKON_EX || - hw->chip_id == CHIP_ID_YUKON_FE_P) - sky2_write32(hw, B0_CTST, sky2->wol - ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF); - - device_set_wakeup_enable(&hw->pdev->dev, sky2->wol); + sky2_hw_set_wol(hw); if (!netif_running(dev)) sky2_wol_init(sky2); -- 2.30.2