From 2eb6b059bafbbfb22d84f2bce13bb72522a34f82 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 24 Oct 2014 20:39:42 +0000 Subject: [PATCH] ar71xx: refresh 3.10 patches Signed-off-by: Felix Fietkau SVN-Revision: 43051 --- ...-make-chipselect-logic-more-flexible.patch | 4 +- ...25p80-allow-to-specify-max-read-size.patch | 2 +- ...o-pass-probe-types-via-platform-data.patch | 2 +- ...td-m25p80-zero-partition-parser-data.patch | 2 +- ...phy-add-phy_mmd_read_write-functions.patch | 2 +- ...S-ath79-enable-UART-for-early_serial.patch | 2 +- ...525-MIPS-ath79-enable-qca-usb-quirks.patch | 16 ++-- .../606-MIPS-ath79-pb44-fixes.patch | 2 +- .../610-MIPS-ath79-openwrt-machines.patch | 86 +++++++++---------- .../720-MIPS-ath79-add-Tube2H-support.patch | 4 +- ...22-MIPS-ath79-add-airGateway-support.patch | 2 +- ...S-ath79-add_mikrotik_rb2011uias-2hnd.patch | 12 +-- ...IPS-ath79-add-qihoo-360-c301-support.patch | 6 +- .../902-unaligned_access_hacks.patch | 18 ++-- 14 files changed, 77 insertions(+), 83 deletions(-) diff --git a/target/linux/ar71xx/patches-3.10/206-spi-ath79-make-chipselect-logic-more-flexible.patch b/target/linux/ar71xx/patches-3.10/206-spi-ath79-make-chipselect-logic-more-flexible.patch index b57dd5d5bab5..4f825f8fd64a 100644 --- a/target/linux/ar71xx/patches-3.10/206-spi-ath79-make-chipselect-logic-more-flexible.patch +++ b/target/linux/ar71xx/patches-3.10/206-spi-ath79-make-chipselect-logic-more-flexible.patch @@ -170,7 +170,7 @@ Signed-off-by: Gabor Juhos struct ath79_spi { struct spi_bitbang bitbang; u32 ioc_base; -@@ -69,6 +71,7 @@ static void ath79_spi_chipselect(struct +@@ -69,6 +71,7 @@ static void ath79_spi_chipselect(struct { struct ath79_spi *sp = ath79_spidev_to_sp(spi); int cs_high = (spi->mode & SPI_CS_HIGH) ? is_active : !is_active; @@ -178,7 +178,7 @@ Signed-off-by: Gabor Juhos if (is_active) { /* set initial clock polarity */ -@@ -80,20 +83,24 @@ static void ath79_spi_chipselect(struct +@@ -80,20 +83,24 @@ static void ath79_spi_chipselect(struct ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); } diff --git a/target/linux/ar71xx/patches-3.10/406-mtd-m25p80-allow-to-specify-max-read-size.patch b/target/linux/ar71xx/patches-3.10/406-mtd-m25p80-allow-to-specify-max-read-size.patch index ecf8110848a5..8e1cd3385bdd 100644 --- a/target/linux/ar71xx/patches-3.10/406-mtd-m25p80-allow-to-specify-max-read-size.patch +++ b/target/linux/ar71xx/patches-3.10/406-mtd-m25p80-allow-to-specify-max-read-size.patch @@ -84,7 +84,7 @@ mutex_unlock(&flash->lock); return 0; -@@ -1022,6 +1045,12 @@ static int m25p_probe(struct spi_device +@@ -1022,6 +1045,12 @@ static int m25p_probe(struct spi_device flash->mtd._unlock = m25p80_unlock; } diff --git a/target/linux/ar71xx/patches-3.10/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch b/target/linux/ar71xx/patches-3.10/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch index babb3eb2cbb2..26b6f70160c8 100644 --- a/target/linux/ar71xx/patches-3.10/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch +++ b/target/linux/ar71xx/patches-3.10/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch @@ -1,6 +1,6 @@ --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c -@@ -1122,7 +1122,9 @@ static int m25p_probe(struct spi_device +@@ -1122,7 +1122,9 @@ static int m25p_probe(struct spi_device /* partitions should match sector boundaries; and it may be good to * use readonly partitions for writeprotected sectors (BP2..BP0). */ diff --git a/target/linux/ar71xx/patches-3.10/412-mtd-m25p80-zero-partition-parser-data.patch b/target/linux/ar71xx/patches-3.10/412-mtd-m25p80-zero-partition-parser-data.patch index 0cfb19c49094..00a1ea34a74d 100644 --- a/target/linux/ar71xx/patches-3.10/412-mtd-m25p80-zero-partition-parser-data.patch +++ b/target/linux/ar71xx/patches-3.10/412-mtd-m25p80-zero-partition-parser-data.patch @@ -1,6 +1,6 @@ --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c -@@ -1072,6 +1072,7 @@ static int m25p_probe(struct spi_device +@@ -1072,6 +1072,7 @@ static int m25p_probe(struct spi_device if (info->flags & M25P_NO_ERASE) flash->mtd.flags |= MTD_NO_ERASE; diff --git a/target/linux/ar71xx/patches-3.10/424-net-phy-add-phy_mmd_read_write-functions.patch b/target/linux/ar71xx/patches-3.10/424-net-phy-add-phy_mmd_read_write-functions.patch index 961a65b9e07b..6b69679ed212 100644 --- a/target/linux/ar71xx/patches-3.10/424-net-phy-add-phy_mmd_read_write-functions.patch +++ b/target/linux/ar71xx/patches-3.10/424-net-phy-add-phy_mmd_read_write-functions.patch @@ -1,6 +1,6 @@ --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c -@@ -1009,6 +1009,12 @@ static int phy_read_mmd_indirect(struct +@@ -1009,6 +1009,12 @@ static int phy_read_mmd_indirect(struct return ret; } diff --git a/target/linux/ar71xx/patches-3.10/521-MIPS-ath79-enable-UART-for-early_serial.patch b/target/linux/ar71xx/patches-3.10/521-MIPS-ath79-enable-UART-for-early_serial.patch index 3d6ddfe18c58..a6e84c5c5db3 100644 --- a/target/linux/ar71xx/patches-3.10/521-MIPS-ath79-enable-UART-for-early_serial.patch +++ b/target/linux/ar71xx/patches-3.10/521-MIPS-ath79-enable-UART-for-early_serial.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ath79/early_printk.c +++ b/arch/mips/ath79/early_printk.c -@@ -56,6 +56,46 @@ static void prom_putchar_dummy(unsigned +@@ -56,6 +56,46 @@ static void prom_putchar_dummy(unsigned /* nothing to do */ } diff --git a/target/linux/ar71xx/patches-3.10/525-MIPS-ath79-enable-qca-usb-quirks.patch b/target/linux/ar71xx/patches-3.10/525-MIPS-ath79-enable-qca-usb-quirks.patch index 0e33674adf0a..696ad335e543 100644 --- a/target/linux/ar71xx/patches-3.10/525-MIPS-ath79-enable-qca-usb-quirks.patch +++ b/target/linux/ar71xx/patches-3.10/525-MIPS-ath79-enable-qca-usb-quirks.patch @@ -29,11 +29,13 @@ - u32 bootstrap; + void __iomem *phy_reg; + u32 t; -+ + +- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); +- if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE) + phy_reg = ioremap(base, 4); + if (!phy_reg) -+ return; -+ + return; + + t = ioread32(phy_reg); + t &= ~0xff; + t |= 0x58; @@ -41,14 +43,12 @@ + + iounmap(phy_reg); +} - -- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); -- if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE) ++ +static void ar934x_usb_reset_notifier(struct platform_device *pdev) +{ + if (pdev->id != -1) - return; - ++ return; ++ + enable_tx_tx_idp_violation_fix(0x18116c94); + dev_info(&pdev->dev, "TX-TX IDP fix enabled\n"); +} diff --git a/target/linux/ar71xx/patches-3.10/606-MIPS-ath79-pb44-fixes.patch b/target/linux/ar71xx/patches-3.10/606-MIPS-ath79-pb44-fixes.patch index f9ec7753f1aa..b38b46121ded 100644 --- a/target/linux/ar71xx/patches-3.10/606-MIPS-ath79-pb44-fixes.patch +++ b/target/linux/ar71xx/patches-3.10/606-MIPS-ath79-pb44-fixes.patch @@ -50,7 +50,7 @@ #define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + 6) #define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + 8) #define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + 9) -@@ -92,21 +117,66 @@ static struct ath79_spi_controller_data +@@ -92,21 +117,66 @@ static struct ath79_spi_controller_data .cs_line = 0, }; diff --git a/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch index cba18a88c78e..60df54cf2425 100644 --- a/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch +++ b/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch @@ -209,13 +209,13 @@ config ATH79_MACH_AP121 bool "Atheros AP121 reference board" select SOC_AR933X -@@ -9,64 +64,736 @@ config ATH79_MACH_AP121 - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO +@@ -11,62 +66,734 @@ config ATH79_MACH_AP121 select ATH79_DEV_M25P80 -- select ATH79_DEV_USB -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC + select ATH79_DEV_USB + select ATH79_DEV_WMAC +- help +- Say 'Y' here if you want your kernel to support the +- Atheros AP121 reference board. + help + Say 'Y' here if you want your kernel to support the + Atheros AP121 reference board. @@ -678,13 +678,8 @@ + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC -- help -- Say 'Y' here if you want your kernel to support the -- Atheros AP121 reference board. - --config ATH79_MACH_AP136 -- bool "Atheros AP136/AP135 reference board" ++ select ATH79_DEV_WMAC ++ +config ATH79_MACH_EAP7660D + bool "Senao EAP7660D support" + select SOC_AR71XX @@ -695,21 +690,14 @@ + +config ATH79_MACH_ARCHER_C7 + bool "TP-LINK Archer C7 board support" - select SOC_QCA955X ++ select SOC_QCA955X + select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_NFC -- select ATH79_DEV_SPI ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC -- help -- Say 'Y' here if you want your kernel to support the -- Atheros AP136 or AP135 reference boards. - --config ATH79_MACH_AP81 -- bool "Atheros AP81 reference board" ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ +config ATH79_MACH_TL_MR11U + bool "TP-LINK TL-MR11U/TL-MR3040 support" + select SOC_AR933X @@ -719,17 +707,27 @@ + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC -+ + +-config ATH79_MACH_AP136 +- bool "Atheros AP136/AP135 reference board" +- select SOC_QCA955X +config ATH79_MACH_TL_MR13U + bool "TP-LINK TL-MR13U support" + select SOC_AR933X + select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO +- select ATH79_DEV_NFC +- select ATH79_DEV_SPI + select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ + select ATH79_DEV_USB + select ATH79_DEV_WMAC +- help +- Say 'Y' here if you want your kernel to support the +- Atheros AP136 or AP135 reference boards. + +-config ATH79_MACH_AP81 +- bool "Atheros AP81 reference board" +config ATH79_MACH_TL_MR3020 + bool "TP-LINK TL-MR3020 support" + select SOC_AR933X @@ -853,9 +851,10 @@ + bool "TP-LINK TL-WR841N v1 support" select SOC_AR71XX + select ATH79_DEV_DSA -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO +- select ATH79_DEV_SPI + select ATH79_DEV_M25P80 + +config ATH79_MACH_TL_WR841N_V8 @@ -902,15 +901,11 @@ +config ATH79_MACH_TL_WR1043ND_V2 + bool "TP-LINK TL-WR1043ND v2 support" + select SOC_QCA955X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_SPI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 - select ATH79_DEV_USB -- help -- Say 'Y' here if you want your kernel to support the -- Atheros PB44 reference board. ++ select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_TL_WR2543N @@ -970,7 +965,10 @@ + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB + select ATH79_DEV_USB +- help +- Say 'Y' here if you want your kernel to support the +- Atheros PB44 reference board. config ATH79_MACH_UBNT_XM bool "Ubiquiti Networks XM/UniFi boards" diff --git a/target/linux/ar71xx/patches-3.10/720-MIPS-ath79-add-Tube2H-support.patch b/target/linux/ar71xx/patches-3.10/720-MIPS-ath79-add-Tube2H-support.patch index c4aa70c952e5..856c0e136f00 100644 --- a/target/linux/ar71xx/patches-3.10/720-MIPS-ath79-add-Tube2H-support.patch +++ b/target/linux/ar71xx/patches-3.10/720-MIPS-ath79-add-Tube2H-support.patch @@ -7,7 +7,7 @@ + ATH79_MACH_TUBE2H, /* Alfa Network Tube2H */ ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */ ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */ - ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */ + ATH79_MACH_UBNT_LOCO_M_XW, /* Ubiquiti Loco M XW */ --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig @@ -29,6 +29,15 @@ config ATH79_MACH_ALFA_NX @@ -28,7 +28,7 @@ select SOC_AR724X --- a/arch/mips/ath79/Makefile +++ b/arch/mips/ath79/Makefile -@@ -116,6 +116,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2) +@@ -116,6 +116,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2) obj-$(CONFIG_ATH79_MACH_TL_WR2543N) += mach-tl-wr2543n.o obj-$(CONFIG_ATH79_MACH_TL_WR703N) += mach-tl-wr703n.o obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3) += mach-tl-wr720n-v3.o diff --git a/target/linux/ar71xx/patches-3.10/722-MIPS-ath79-add-airGateway-support.patch b/target/linux/ar71xx/patches-3.10/722-MIPS-ath79-add-airGateway-support.patch index c9d1e1e7840b..7ff07b6b214e 100644 --- a/target/linux/ar71xx/patches-3.10/722-MIPS-ath79-add-airGateway-support.patch +++ b/target/linux/ar71xx/patches-3.10/722-MIPS-ath79-add-airGateway-support.patch @@ -12,7 +12,7 @@ #include "dev-ap9x-pci.h" #include "dev-eth.h" #include "dev-gpio-buttons.h" -@@ -406,3 +408,65 @@ MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, +@@ -407,3 +409,65 @@ MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW", ubnt_loco_m_xw_setup); diff --git a/target/linux/ar71xx/patches-3.10/725-MIPS-ath79-add_mikrotik_rb2011uias-2hnd.patch b/target/linux/ar71xx/patches-3.10/725-MIPS-ath79-add_mikrotik_rb2011uias-2hnd.patch index dd763537254b..f49d713ad430 100644 --- a/target/linux/ar71xx/patches-3.10/725-MIPS-ath79-add_mikrotik_rb2011uias-2hnd.patch +++ b/target/linux/ar71xx/patches-3.10/725-MIPS-ath79-add_mikrotik_rb2011uias-2hnd.patch @@ -1,7 +1,5 @@ -Index: linux-3.10.49/arch/mips/ath79/mach-rb2011.c -=================================================================== ---- linux-3.10.49.orig/arch/mips/ath79/mach-rb2011.c -+++ linux-3.10.49/arch/mips/ath79/mach-rb2011.c +--- a/arch/mips/ath79/mach-rb2011.c ++++ b/arch/mips/ath79/mach-rb2011.c @@ -323,7 +323,7 @@ MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011US static void __init rb2011r5_setup(void) @@ -11,10 +9,8 @@ Index: linux-3.10.49/arch/mips/ath79/mach-rb2011.c } MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011R5, "2011r5", rb2011r5_setup); -Index: linux-3.10.49/arch/mips/ath79/machtypes.h -=================================================================== ---- linux-3.10.49.orig/arch/mips/ath79/machtypes.h -+++ linux-3.10.49/arch/mips/ath79/machtypes.h +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h @@ -99,7 +99,7 @@ enum ath79_mach_type { ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */ ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */ diff --git a/target/linux/ar71xx/patches-3.10/726-MIPS-ath79-add-qihoo-360-c301-support.patch b/target/linux/ar71xx/patches-3.10/726-MIPS-ath79-add-qihoo-360-c301-support.patch index 6be83b0bb076..c815b147673d 100644 --- a/target/linux/ar71xx/patches-3.10/726-MIPS-ath79-add-qihoo-360-c301-support.patch +++ b/target/linux/ar71xx/patches-3.10/726-MIPS-ath79-add-qihoo-360-c301-support.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig -@@ -1034,6 +1034,17 @@ +@@ -1034,6 +1034,17 @@ config ATH79_MACH_BHU_BXU2000N2_A select ATH79_DEV_USB select ATH79_DEV_WMAC @@ -20,7 +20,7 @@ config SOC_AR71XX --- a/arch/mips/ath79/machtypes.h +++ b/arch/mips/ath79/machtypes.h -@@ -80,6 +80,7 @@ +@@ -80,6 +80,7 @@ enum ath79_mach_type { ATH79_MACH_OM5P, /* OpenMesh OM5P */ ATH79_MACH_PB42, /* Atheros PB42 */ ATH79_MACH_PB92, /* Atheros PB92 */ @@ -30,7 +30,7 @@ ATH79_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */ --- a/arch/mips/ath79/Makefile +++ b/arch/mips/ath79/Makefile -@@ -85,6 +85,7 @@ +@@ -85,6 +85,7 @@ obj-$(CONFIG_ATH79_MACH_OM5P) += mach-o obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o diff --git a/target/linux/ar71xx/patches-3.10/902-unaligned_access_hacks.patch b/target/linux/ar71xx/patches-3.10/902-unaligned_access_hacks.patch index 121276a6a16c..4217545d95a2 100644 --- a/target/linux/ar71xx/patches-3.10/902-unaligned_access_hacks.patch +++ b/target/linux/ar71xx/patches-3.10/902-unaligned_access_hacks.patch @@ -229,7 +229,7 @@ #include #include -@@ -763,10 +764,10 @@ static void tcp_v6_send_response(struct +@@ -763,10 +764,10 @@ static void tcp_v6_send_response(struct topt = (__be32 *)(t1 + 1); if (tsecr) { @@ -380,7 +380,7 @@ for (p = *head; p; p = p->next) { --- a/net/ipv4/route.c +++ b/net/ipv4/route.c -@@ -461,7 +461,7 @@ static struct neighbour *ipv4_neigh_look +@@ -462,7 +462,7 @@ static struct neighbour *ipv4_neigh_look else if (skb) pkey = &ip_hdr(skb)->daddr; @@ -662,7 +662,7 @@ #include --- a/include/net/inet_ecn.h +++ b/include/net/inet_ecn.h -@@ -115,13 +115,13 @@ static inline int IP6_ECN_set_ce(struct +@@ -115,13 +115,13 @@ static inline int IP6_ECN_set_ce(struct { if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph))) return 0; @@ -720,7 +720,7 @@ return false; return true; -@@ -587,13 +591,13 @@ static inline void ipv6_addr_set_v4mappe +@@ -592,13 +596,13 @@ static inline void ipv6_addr_set_v4mappe */ static inline int __ipv6_addr_diff32(const void *token1, const void *token2, int addrlen) { @@ -736,7 +736,7 @@ if (xb) return i * 32 + 31 - __fls(ntohl(xb)); } -@@ -657,12 +661,13 @@ extern void ipv6_select_ident(struct fra +@@ -660,12 +664,13 @@ static inline int ipv6_addr_diff(const s static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass, __be32 flowlabel) { @@ -760,8 +760,8 @@ #include +#include - extern __u32 secure_ip_id(__be32 daddr); - extern __u32 secure_ipv6_id(const __be32 daddr[4]); + extern u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport); + extern u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr, --- a/include/uapi/linux/in.h +++ b/include/uapi/linux/in.h @@ -55,7 +55,7 @@ enum { @@ -803,7 +803,7 @@ secret[4] = net_secret[4] + (__force u32)dport; for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++) secret[i] = net_secret[i]; -@@ -185,11 +187,12 @@ u64 secure_dccpv6_sequence_number(__be32 +@@ -160,11 +162,12 @@ u64 secure_dccpv6_sequence_number(__be32 u32 hash[MD5_DIGEST_WORDS]; u64 seq; u32 i; @@ -855,7 +855,7 @@ ptr = ip6hoff + sizeof(struct ipv6hdr); --- a/net/xfrm/xfrm_input.c +++ b/net/xfrm/xfrm_input.c -@@ -77,8 +77,8 @@ int xfrm_parse_spi(struct sk_buff *skb, +@@ -77,8 +77,8 @@ int xfrm_parse_spi(struct sk_buff *skb, if (!pskb_may_pull(skb, hlen)) return -EINVAL; -- 2.30.2