From 339ccc362cb60b48e478ff494172efadb385c0ab Mon Sep 17 00:00:00 2001 From: Cindy H Kao Date: Mon, 10 Aug 2009 18:36:15 -0700 Subject: [PATCH] wimax/i2400m/sdio: clear the INTR status bit after reading size In order to avoid issues during high-load traffic, the interrupt status register has to be cleared ONLY after the RX size is read. Signed-off-by: Cindy H Kao Signed-off-by: Inaky Perez-Gonzalez --- drivers/net/wimax/i2400m/sdio-rx.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/wimax/i2400m/sdio-rx.c b/drivers/net/wimax/i2400m/sdio-rx.c index f6ca51ab216d..1c9046914bd1 100644 --- a/drivers/net/wimax/i2400m/sdio-rx.c +++ b/drivers/net/wimax/i2400m/sdio-rx.c @@ -138,6 +138,11 @@ void i2400ms_rx(struct i2400ms *i2400ms) ret = rx_size; goto error_get_size; } + /* + * Hardware quirk: make sure to clear the INTR status register + * AFTER getting the data transfer size. + */ + sdio_writeb(func, 1, I2400MS_INTR_CLEAR_ADDR, &ret); ret = -ENOMEM; skb = alloc_skb(rx_size, GFP_ATOMIC); @@ -209,7 +214,6 @@ void i2400ms_irq(struct sdio_func *func) dev_err(dev, "RX: BUG? got IRQ but no interrupt ready?\n"); goto error_no_irq; } - sdio_writeb(func, 1, I2400MS_INTR_CLEAR_ADDR, &ret); i2400ms_rx(i2400ms); error_no_irq: d_fnend(6, dev, "(i2400ms %p) = void\n", i2400ms); -- 2.30.2