From 35717d8d6fc6fc50692273d6667a0a575c26aa93 Mon Sep 17 00:00:00 2001 From: John Ogness Date: Fri, 14 Nov 2014 15:42:52 +0100 Subject: [PATCH] drivers: net: cpsw: Fix TX_IN_SEL offset The TX_IN_SEL offset for the CPSW_PORT/TX_IN_CTL register was incorrect. This caused the Dual MAC mode to never get set when it should. It also caused possible unintentional setting of a bit in the CPSW_PORT/TX_BLKS_REM register. The purpose of setting the Dual MAC mode for this register is to: "... allow packets from both ethernet ports to be written into the FIFO without one port starving the other port." - AM335x ARM TRM Signed-off-by: John Ogness Reviewed-by: Mugunthan V N Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index d8794488f80a..c560f9aeb55d 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -129,9 +129,9 @@ do { \ #define CPSW_VLAN_AWARE BIT(1) #define CPSW_ALE_VLAN_AWARE 1 -#define CPSW_FIFO_NORMAL_MODE (0 << 15) -#define CPSW_FIFO_DUAL_MAC_MODE (1 << 15) -#define CPSW_FIFO_RATE_LIMIT_MODE (2 << 15) +#define CPSW_FIFO_NORMAL_MODE (0 << 16) +#define CPSW_FIFO_DUAL_MAC_MODE (1 << 16) +#define CPSW_FIFO_RATE_LIMIT_MODE (2 << 16) #define CPSW_INTPACEEN (0x3f << 16) #define CPSW_INTPRESCALE_MASK (0x7FF << 0) -- 2.30.2