From 3624379d90ad2b65f9dbb30d7f7ce5498d2fe322 Mon Sep 17 00:00:00 2001 From: Eugeniy Paltsev Date: Thu, 4 Oct 2018 16:12:12 +0300 Subject: [PATCH] ARC: IOC: panic if kernel was started with previously enabled IOC If IOC was already enabled (due to bootloader) it technically needs to be reconfigured with aperture base,size corresponding to Linux memory map which will certainly be different than uboot's. But disabling and reenabling IOC when DMA might be potentially active is tricky business. To avoid random memory issues later, just panic here and ask user to upgrade bootloader to one which doesn't enable IOC This was actually seen as issue on some of the HSDK board with a version of uboot which enabled IOC. There were random issues later with starting of X or peripherals etc. Also while I'm at it, replace hardcoded bits in ARC_REG_IO_COH_PARTIAL and ARC_REG_IO_COH_ENABLE registers by definitions. Inspired by: https://lkml.org/lkml/2018/1/19/557 Signed-off-by: Eugeniy Paltsev Signed-off-by: Vineet Gupta --- arch/arc/include/asm/cache.h | 2 ++ arch/arc/mm/cache.c | 20 +++++++++++++++++--- 2 files changed, 19 insertions(+), 3 deletions(-) diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h index ff7d3232764a..f393b663413e 100644 --- a/arch/arc/include/asm/cache.h +++ b/arch/arc/include/asm/cache.h @@ -113,7 +113,9 @@ extern unsigned long perip_base, perip_end; /* IO coherency related Auxiliary registers */ #define ARC_REG_IO_COH_ENABLE 0x500 +#define ARC_IO_COH_ENABLE_BIT BIT(0) #define ARC_REG_IO_COH_PARTIAL 0x501 +#define ARC_IO_COH_PARTIAL_BIT BIT(0) #define ARC_REG_IO_COH_AP0_BASE 0x508 #define ARC_REG_IO_COH_AP0_SIZE 0x509 diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index f2701c13a66b..cf9619d4efb4 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -1144,6 +1144,20 @@ noinline void __init arc_ioc_setup(void) { unsigned int ioc_base, mem_sz; + /* + * If IOC was already enabled (due to bootloader) it technically needs to + * be reconfigured with aperture base,size corresponding to Linux memory map + * which will certainly be different than uboot's. But disabling and + * reenabling IOC when DMA might be potentially active is tricky business. + * To avoid random memory issues later, just panic here and ask user to + * upgrade bootloader to one which doesn't enable IOC + */ + if (read_aux_reg(ARC_REG_IO_COH_ENABLE) & ARC_IO_COH_ENABLE_BIT) + panic("IOC already enabled, please upgrade bootloader!\n"); + + if (!ioc_enable) + return; + /* * As for today we don't support both IOC and ZONE_HIGHMEM enabled * simultaneously. This happens because as of today IOC aperture covers @@ -1187,8 +1201,8 @@ noinline void __init arc_ioc_setup(void) panic("IOC Aperture start must be aligned to the size of the aperture"); write_aux_reg(ARC_REG_IO_COH_AP0_BASE, ioc_base >> 12); - write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1); - write_aux_reg(ARC_REG_IO_COH_ENABLE, 1); + write_aux_reg(ARC_REG_IO_COH_PARTIAL, ARC_IO_COH_PARTIAL_BIT); + write_aux_reg(ARC_REG_IO_COH_ENABLE, ARC_IO_COH_ENABLE_BIT); /* Re-enable L1 dcache */ __dc_enable(); @@ -1265,7 +1279,7 @@ void __init arc_cache_init_master(void) if (is_isa_arcv2() && l2_line_sz && !slc_enable) arc_slc_disable(); - if (is_isa_arcv2() && ioc_enable) + if (is_isa_arcv2() && ioc_exists) arc_ioc_setup(); if (is_isa_arcv2() && l2_line_sz && slc_enable) { -- 2.30.2