From 373e6978f9c5c05af3b3ec4cd0295b0bfbe11644 Mon Sep 17 00:00:00 2001 From: "Akeem G. Abodunrin" Date: Fri, 29 Mar 2013 15:22:17 +0000 Subject: [PATCH] igb: SerDes flow control setting This path allows users to get appropriate flow control setting on SerDes devices, based on original implementation for Copper devices. Also, since 100baseFX does not support setting flow control, so exclude it from the setting mechanism. Signed-off-by: Akeem G. Abodunrin Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_ethtool.c | 34 +++++++++++--------- 1 file changed, 19 insertions(+), 15 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index 4e54f847ac92..7b25ee2e81c0 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -164,21 +164,6 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) ecmd->advertising |= hw->phy.autoneg_advertised; } - if (hw->mac.autoneg != 1) - ecmd->advertising &= ~(ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - - if (hw->fc.requested_mode == e1000_fc_full) - ecmd->advertising |= ADVERTISED_Pause; - else if (hw->fc.requested_mode == e1000_fc_rx_pause) - ecmd->advertising |= (ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - else if (hw->fc.requested_mode == e1000_fc_tx_pause) - ecmd->advertising |= ADVERTISED_Asym_Pause; - else - ecmd->advertising &= ~(ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - ecmd->port = PORT_TP; ecmd->phy_address = hw->phy.addr; ecmd->transceiver = XCVR_INTERNAL; @@ -206,6 +191,21 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) ecmd->transceiver = XCVR_EXTERNAL; } + if (hw->mac.autoneg != 1) + ecmd->advertising &= ~(ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + + if (hw->fc.requested_mode == e1000_fc_full) + ecmd->advertising |= ADVERTISED_Pause; + else if (hw->fc.requested_mode == e1000_fc_rx_pause) + ecmd->advertising |= (ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + else if (hw->fc.requested_mode == e1000_fc_tx_pause) + ecmd->advertising |= ADVERTISED_Asym_Pause; + else + ecmd->advertising &= ~(ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + status = rd32(E1000_STATUS); if (status & E1000_STATUS_LU) { @@ -386,6 +386,10 @@ static int igb_set_pauseparam(struct net_device *netdev, struct e1000_hw *hw = &adapter->hw; int retval = 0; + /* 100basefx does not support setting link flow control */ + if (hw->dev_spec._82575.eth_flags.e100_base_fx) + return -EINVAL; + adapter->fc_autoneg = pause->autoneg; while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) -- 2.30.2