From 383ffda2fa8ff3c6380cc5be1eb6cde510de6fa8 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Mon, 10 Jun 2013 18:15:23 +0900 Subject: [PATCH] ARM: EXYNOS: no more support non-DT for EXYNOS SoCs As we discussed in mailing list, non-DT for EXYNOS SoCs will not be supported from v3.11. This patch removes regarding files for non-DT including board files and defconfig. Cc: Sylwester Nawrocki Cc: Tomasz Figa Cc: Thomas Abraham Cc: Kyungmin Park Cc: Arnd Bergmann Cc: Olof Johansson Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/Kconfig | 320 +---------------------------- arch/arm/mach-exynos/Makefile | 26 --- arch/arm/mach-exynos/common.c | 10 - arch/arm/mach-exynos/dev-ahci.c | 255 ----------------------- arch/arm/mach-exynos/dev-ohci.c | 52 ----- arch/arm/mach-exynos/dma.c | 322 ------------------------------ arch/arm/mach-exynos/pm_domains.c | 7 - 7 files changed, 1 insertion(+), 991 deletions(-) delete mode 100644 arch/arm/mach-exynos/dev-ahci.c delete mode 100644 arch/arm/mach-exynos/dev-ohci.c delete mode 100644 arch/arm/mach-exynos/dma.c diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index ff18fc2ea46f..41fd73f4c29e 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -84,329 +84,11 @@ config SOC_EXYNOS5440 help Enable EXYNOS5440 SoC support -config EXYNOS_ATAGS - bool "ATAGS based boot for EXYNOS (deprecated)" - depends on !ARCH_MULTIPLATFORM - depends on ATAGS - default y - help - The EXYNOS platform is moving towards being completely probed - through device tree. This enables support for board files using - the traditional ATAGS boot format. - Note that this option is not available for multiplatform builds. - -if EXYNOS_ATAGS - -config EXYNOS_DEV_DMA - bool - help - Compile in amba device definitions for DMA controller - -config EXYNOS4_DEV_AHCI - bool - help - Compile in platform device definitions for AHCI - -config EXYNOS4_SETUP_FIMD0 - bool - help - Common setup code for FIMD0. - -config EXYNOS4_DEV_USB_OHCI - bool - help - Compile in platform device definition for USB OHCI - -config EXYNOS4_SETUP_I2C1 - bool - help - Common setup code for i2c bus 1. - -config EXYNOS4_SETUP_I2C2 - bool - help - Common setup code for i2c bus 2. - -config EXYNOS4_SETUP_I2C3 - bool - help - Common setup code for i2c bus 3. - -config EXYNOS4_SETUP_I2C4 - bool - help - Common setup code for i2c bus 4. - -config EXYNOS4_SETUP_I2C5 - bool - help - Common setup code for i2c bus 5. - -config EXYNOS4_SETUP_I2C6 - bool - help - Common setup code for i2c bus 6. - -config EXYNOS4_SETUP_I2C7 - bool - help - Common setup code for i2c bus 7. - -config EXYNOS4_SETUP_KEYPAD - bool - help - Common setup code for keypad. - -config EXYNOS4_SETUP_SDHCI - bool - select EXYNOS4_SETUP_SDHCI_GPIO - help - Internal helper functions for EXYNOS4 based SDHCI systems. - -config EXYNOS4_SETUP_SDHCI_GPIO - bool - help - Common setup code for SDHCI gpio. - -config EXYNOS4_SETUP_FIMC - bool - help - Common setup code for the camera interfaces. - -config EXYNOS4_SETUP_USB_PHY - bool - help - Common setup code for USB PHY controller - -config EXYNOS_SETUP_SPI - bool - help - Common setup code for SPI GPIO configurations. - -# machine support - -if ARCH_EXYNOS4 - -comment "EXYNOS4210 Boards" - -config MACH_SMDKC210 - bool "SMDKC210" - select MACH_SMDKV310 - help - Machine support for Samsung SMDKC210 - -config MACH_SMDKV310 - bool "SMDKV310" - select CPU_EXYNOS4210 - select EXYNOS4_DEV_AHCI - select EXYNOS4_DEV_USB_OHCI - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_I2C1 - select EXYNOS4_SETUP_KEYPAD - select EXYNOS4_SETUP_SDHCI - select EXYNOS4_SETUP_USB_PHY - select EXYNOS_DEV_DMA - select EXYNOS_DEV_SYSMMU - select S3C24XX_PWM - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S3C_DEV_I2C1 - select S3C_DEV_RTC - select S3C_DEV_USB_HSOTG - select S3C_DEV_WDT - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select S5P_DEV_FIMC3 - select S5P_DEV_FIMD0 - select S5P_DEV_G2D - select S5P_DEV_I2C_HDMIPHY - select S5P_DEV_JPEG - select S5P_DEV_MFC - select S5P_DEV_TV - select S5P_DEV_USB_EHCI - select SAMSUNG_DEV_BACKLIGHT - select SAMSUNG_DEV_KEYPAD - select SAMSUNG_DEV_PWM - help - Machine support for Samsung SMDKV310 - -config MACH_ARMLEX4210 - bool "ARMLEX4210" - select CPU_EXYNOS4210 - select EXYNOS4_DEV_AHCI - select EXYNOS4_SETUP_SDHCI - select EXYNOS_DEV_DMA - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S3C_DEV_RTC - select S3C_DEV_WDT - help - Machine support for Samsung ARMLEX4210 based on EXYNOS4210 - -config MACH_UNIVERSAL_C210 - bool "Mobile UNIVERSAL_C210 Board" - select CLKSRC_MMIO - select CLKSRC_SAMSUNG_PWM - select CPU_EXYNOS4210 - select EXYNOS4_SETUP_FIMC - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_I2C1 - select EXYNOS4_SETUP_I2C3 - select EXYNOS4_SETUP_I2C5 - select EXYNOS4_SETUP_SDHCI - select EXYNOS4_SETUP_USB_PHY - select EXYNOS_DEV_DMA - select EXYNOS_DEV_SYSMMU - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S3C_DEV_I2C1 - select S3C_DEV_I2C3 - select S3C_DEV_I2C5 - select S3C_DEV_USB_HSOTG - select S5P_DEV_CSIS0 - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select S5P_DEV_FIMC3 - select S5P_DEV_FIMD0 - select S5P_DEV_G2D - select S5P_DEV_I2C_HDMIPHY - select S5P_DEV_JPEG - select S5P_DEV_MFC - select S5P_DEV_ONENAND - select S5P_DEV_TV - select S5P_GPIO_INT - select S5P_SETUP_MIPIPHY - help - Machine support for Samsung Mobile Universal S5PC210 Reference - Board. - -config MACH_NURI - bool "Mobile NURI Board" - select CPU_EXYNOS4210 - select EXYNOS4_SETUP_FIMC - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_I2C1 - select EXYNOS4_SETUP_I2C3 - select EXYNOS4_SETUP_I2C5 - select EXYNOS4_SETUP_I2C6 - select EXYNOS4_SETUP_SDHCI - select EXYNOS4_SETUP_USB_PHY - select EXYNOS_DEV_DMA - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S3C_DEV_I2C1 - select S3C_DEV_I2C3 - select S3C_DEV_I2C5 - select S3C_DEV_I2C6 - select S3C_DEV_RTC - select S3C_DEV_USB_HSOTG - select S3C_DEV_WDT - select S5P_DEV_CSIS0 - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select S5P_DEV_FIMC3 - select S5P_DEV_FIMD0 - select S5P_DEV_G2D - select S5P_DEV_JPEG - select S5P_DEV_MFC - select S5P_DEV_USB_EHCI - select S5P_GPIO_INT - select S5P_SETUP_MIPIPHY - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_PWM - help - Machine support for Samsung Mobile NURI Board. - -config MACH_ORIGEN - bool "ORIGEN" - select CPU_EXYNOS4210 - select EXYNOS4_DEV_USB_OHCI - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_SDHCI - select EXYNOS4_SETUP_USB_PHY - select EXYNOS_DEV_DMA - select EXYNOS_DEV_SYSMMU - select S3C24XX_PWM - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC2 - select S3C_DEV_RTC - select S3C_DEV_USB_HSOTG - select S3C_DEV_WDT - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select S5P_DEV_FIMC3 - select S5P_DEV_FIMD0 - select S5P_DEV_G2D - select S5P_DEV_I2C_HDMIPHY - select S5P_DEV_JPEG - select S5P_DEV_MFC - select S5P_DEV_TV - select S5P_DEV_USB_EHCI - select SAMSUNG_DEV_BACKLIGHT - select SAMSUNG_DEV_PWM - help - Machine support for ORIGEN based on Samsung EXYNOS4210 - -comment "EXYNOS4212 Boards" - -config MACH_SMDK4212 - bool "SMDK4212" - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_I2C1 - select EXYNOS4_SETUP_I2C3 - select EXYNOS4_SETUP_I2C7 - select EXYNOS4_SETUP_KEYPAD - select EXYNOS4_SETUP_SDHCI - select EXYNOS4_SETUP_USB_PHY - select EXYNOS_DEV_DMA - select EXYNOS_DEV_SYSMMU - select S3C24XX_PWM - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S3C_DEV_I2C1 - select S3C_DEV_I2C3 - select S3C_DEV_I2C7 - select S3C_DEV_RTC - select S3C_DEV_USB_HSOTG - select S3C_DEV_WDT - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select S5P_DEV_FIMC3 - select S5P_DEV_FIMD0 - select S5P_DEV_MFC - select SAMSUNG_DEV_BACKLIGHT - select SAMSUNG_DEV_KEYPAD - select SAMSUNG_DEV_PWM - select SOC_EXYNOS4212 - help - Machine support for Samsung SMDK4212 - -comment "EXYNOS4412 Boards" - -config MACH_SMDK4412 - bool "SMDK4412" - select MACH_SMDK4212 - select SOC_EXYNOS4412 - help - Machine support for Samsung SMDK4412 -endif - -endif - comment "Flattened Device Tree based board for EXYNOS SoCs" config MACH_EXYNOS4_DT bool "Samsung Exynos4 Machine using device tree" + default y depends on ARCH_EXYNOS4 select ARM_AMBA select CLKSRC_OF diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index b09b027178f3..9811f87308b1 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -32,16 +32,6 @@ AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec) # machine support -obj-$(CONFIG_MACH_SMDKC210) += mach-smdkv310.o -obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o -obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o -obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o -obj-$(CONFIG_MACH_NURI) += mach-nuri.o -obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o - -obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o -obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o - obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o @@ -49,21 +39,5 @@ obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o obj-y += dev-uart.o obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o -obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o -obj-$(CONFIG_EXYNOS_DEV_DMA) += dma.o -obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o -obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o -obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o -obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o -obj-$(CONFIG_EXYNOS4_SETUP_I2C2) += setup-i2c2.o -obj-$(CONFIG_EXYNOS4_SETUP_I2C3) += setup-i2c3.o -obj-$(CONFIG_EXYNOS4_SETUP_I2C4) += setup-i2c4.o -obj-$(CONFIG_EXYNOS4_SETUP_I2C5) += setup-i2c5.o -obj-$(CONFIG_EXYNOS4_SETUP_I2C6) += setup-i2c6.o -obj-$(CONFIG_EXYNOS4_SETUP_I2C7) += setup-i2c7.o -obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o -obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o -obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o -obj-$(CONFIG_EXYNOS_SETUP_SPI) += setup-spi.o diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index f7e504b7874d..9834357707d8 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -353,7 +353,6 @@ void __init exynos_init_late(void) exynos_pm_late_initcall(); } -#ifdef CONFIG_OF int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, int depth, void *data) { @@ -376,7 +375,6 @@ int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, iotable_init(&iodesc, 1); return 1; } -#endif /* * exynos_map_io @@ -388,11 +386,9 @@ void __init exynos_init_io(struct map_desc *mach_desc, int size) { debug_ll_io_init(); -#ifdef CONFIG_OF if (initial_boot_params) of_scan_flat_dt(exynos_fdt_map_chipid, NULL); else -#endif iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc)); if (mach_desc) @@ -475,10 +471,8 @@ void __init exynos_init_time(void) }; if (of_have_populated_dt()) { -#ifdef CONFIG_OF of_clk_init(NULL); clocksource_of_init(); -#endif } else { /* todo: remove after migrating legacy E4 platforms to dt */ #ifdef CONFIG_ARCH_EXYNOS4 @@ -517,10 +511,8 @@ void __init exynos4_init_irq(void) if (!of_have_populated_dt()) gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset, NULL); -#ifdef CONFIG_OF else irqchip_init(); -#endif if (!of_have_populated_dt()) combiner_init(S5P_VA_COMBINER_BASE, NULL, @@ -531,9 +523,7 @@ void __init exynos4_init_irq(void) void __init exynos5_init_irq(void) { -#ifdef CONFIG_OF irqchip_init(); -#endif gic_arch_extn.irq_set_wake = s3c_irq_wake; } diff --git a/arch/arm/mach-exynos/dev-ahci.c b/arch/arm/mach-exynos/dev-ahci.c deleted file mode 100644 index ce1aad3eeeb9..000000000000 --- a/arch/arm/mach-exynos/dev-ahci.c +++ /dev/null @@ -1,255 +0,0 @@ -/* linux/arch/arm/mach-exynos4/dev-ahci.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - AHCI support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include - -#include - -#include -#include -#include - -/* PHY Control Register */ -#define SATA_CTRL0 0x0 -/* PHY Link Control Register */ -#define SATA_CTRL1 0x4 -/* PHY Status Register */ -#define SATA_PHY_STATUS 0x8 - -#define SATA_CTRL0_RX_DATA_VALID(x) (x << 27) -#define SATA_CTRL0_SPEED_MODE (1 << 26) -#define SATA_CTRL0_M_PHY_CAL (1 << 19) -#define SATA_CTRL0_PHY_CMU_RST_N (1 << 10) -#define SATA_CTRL0_M_PHY_LN_RST_N (1 << 9) -#define SATA_CTRL0_PHY_POR_N (1 << 8) - -#define SATA_CTRL1_RST_PMALIVE_N (1 << 8) -#define SATA_CTRL1_RST_RXOOB_N (1 << 7) -#define SATA_CTRL1_RST_RX_N (1 << 6) -#define SATA_CTRL1_RST_TX_N (1 << 5) - -#define SATA_PHY_STATUS_CMU_OK (1 << 18) -#define SATA_PHY_STATUS_LANE_OK (1 << 16) - -#define LANE0 0x200 -#define COM_LANE 0xA00 - -#define HOST_PORTS_IMPL 0xC -#define SCLK_SATA_FREQ (67 * MHZ) - -static void __iomem *phy_base, *phy_ctrl; - -struct phy_reg { - u8 reg; - u8 val; -}; - -/* SATA PHY setup */ -static const struct phy_reg exynos4_sataphy_cmu[] = { - { 0x00, 0x06 }, { 0x02, 0x80 }, { 0x22, 0xa0 }, { 0x23, 0x42 }, - { 0x2e, 0x04 }, { 0x2f, 0x50 }, { 0x30, 0x70 }, { 0x31, 0x02 }, - { 0x32, 0x25 }, { 0x33, 0x40 }, { 0x34, 0x01 }, { 0x35, 0x40 }, - { 0x61, 0x2e }, { 0x63, 0x5e }, { 0x65, 0x42 }, { 0x66, 0xd1 }, - { 0x67, 0x20 }, { 0x68, 0x28 }, { 0x69, 0x78 }, { 0x6a, 0x04 }, - { 0x6b, 0xc8 }, { 0x6c, 0x06 }, -}; - -static const struct phy_reg exynos4_sataphy_lane[] = { - { 0x00, 0x02 }, { 0x05, 0x10 }, { 0x06, 0x84 }, { 0x07, 0x04 }, - { 0x08, 0xe0 }, { 0x10, 0x23 }, { 0x13, 0x05 }, { 0x14, 0x30 }, - { 0x15, 0x00 }, { 0x17, 0x70 }, { 0x18, 0xf2 }, { 0x19, 0x1e }, - { 0x1a, 0x18 }, { 0x1b, 0x0d }, { 0x1c, 0x08 }, { 0x50, 0x60 }, - { 0x51, 0x0f }, -}; - -static const struct phy_reg exynos4_sataphy_comlane[] = { - { 0x01, 0x20 }, { 0x03, 0x40 }, { 0x04, 0x3c }, { 0x05, 0x7d }, - { 0x06, 0x1d }, { 0x07, 0xcf }, { 0x08, 0x05 }, { 0x09, 0x63 }, - { 0x0a, 0x29 }, { 0x0b, 0xc4 }, { 0x0c, 0x01 }, { 0x0d, 0x03 }, - { 0x0e, 0x28 }, { 0x0f, 0x98 }, { 0x10, 0x19 }, { 0x13, 0x80 }, - { 0x14, 0xf0 }, { 0x15, 0xd0 }, { 0x39, 0xa0 }, { 0x3a, 0xa0 }, - { 0x3b, 0xa0 }, { 0x3c, 0xa0 }, { 0x3d, 0xa0 }, { 0x3e, 0xa0 }, - { 0x3f, 0xa0 }, { 0x40, 0x42 }, { 0x42, 0x80 }, { 0x43, 0x58 }, - { 0x45, 0x44 }, { 0x46, 0x5c }, { 0x47, 0x86 }, { 0x48, 0x8d }, - { 0x49, 0xd0 }, { 0x4a, 0x09 }, { 0x4b, 0x90 }, { 0x4c, 0x07 }, - { 0x4d, 0x40 }, { 0x51, 0x20 }, { 0x52, 0x32 }, { 0x7f, 0xd8 }, - { 0x80, 0x1a }, { 0x81, 0xff }, { 0x82, 0x11 }, { 0x83, 0x00 }, - { 0x87, 0xf0 }, { 0x87, 0xff }, { 0x87, 0xff }, { 0x87, 0xff }, - { 0x87, 0xff }, { 0x8c, 0x1c }, { 0x8d, 0xc2 }, { 0x8e, 0xc3 }, - { 0x8f, 0x3f }, { 0x90, 0x0a }, { 0x96, 0xf8 }, -}; - -static int wait_for_phy_ready(void __iomem *reg, unsigned long bit) -{ - unsigned long timeout; - - /* wait for maximum of 3 sec */ - timeout = jiffies + msecs_to_jiffies(3000); - while (!(__raw_readl(reg) & bit)) { - if (time_after(jiffies, timeout)) - return -1; - cpu_relax(); - } - return 0; -} - -static int ahci_phy_init(void __iomem *mmio) -{ - int i, ctrl0; - - for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_cmu); i++) - __raw_writeb(exynos4_sataphy_cmu[i].val, - phy_base + (exynos4_sataphy_cmu[i].reg * 4)); - - for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_lane); i++) - __raw_writeb(exynos4_sataphy_lane[i].val, - phy_base + (LANE0 + exynos4_sataphy_lane[i].reg) * 4); - - for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_comlane); i++) - __raw_writeb(exynos4_sataphy_comlane[i].val, - phy_base + (COM_LANE + exynos4_sataphy_comlane[i].reg) * 4); - - __raw_writeb(0x07, phy_base); - - ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0); - ctrl0 |= SATA_CTRL0_PHY_CMU_RST_N; - __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0); - - if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS, - SATA_PHY_STATUS_CMU_OK) < 0) { - printk(KERN_ERR "PHY CMU not ready\n"); - return -EBUSY; - } - - __raw_writeb(0x03, phy_base + (COM_LANE * 4)); - - ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0); - ctrl0 |= SATA_CTRL0_M_PHY_LN_RST_N; - __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0); - - if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS, - SATA_PHY_STATUS_LANE_OK) < 0) { - printk(KERN_ERR "PHY LANE not ready\n"); - return -EBUSY; - } - - ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0); - ctrl0 |= SATA_CTRL0_M_PHY_CAL; - __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0); - - return 0; -} - -static int exynos4_ahci_init(struct device *dev, void __iomem *mmio) -{ - struct clk *clk_sata, *clk_sataphy, *clk_sclk_sata; - int val, ret; - - phy_base = ioremap(EXYNOS4_PA_SATAPHY, SZ_64K); - if (!phy_base) { - dev_err(dev, "failed to allocate memory for SATA PHY\n"); - return -ENOMEM; - } - - phy_ctrl = ioremap(EXYNOS4_PA_SATAPHY_CTRL, SZ_16); - if (!phy_ctrl) { - dev_err(dev, "failed to allocate memory for SATA PHY CTRL\n"); - ret = -ENOMEM; - goto err1; - } - - clk_sata = clk_get(dev, "sata"); - if (IS_ERR(clk_sata)) { - dev_err(dev, "failed to get sata clock\n"); - ret = PTR_ERR(clk_sata); - clk_sata = NULL; - goto err2; - - } - clk_enable(clk_sata); - - clk_sataphy = clk_get(dev, "sataphy"); - if (IS_ERR(clk_sataphy)) { - dev_err(dev, "failed to get sataphy clock\n"); - ret = PTR_ERR(clk_sataphy); - clk_sataphy = NULL; - goto err3; - } - clk_enable(clk_sataphy); - - clk_sclk_sata = clk_get(dev, "sclk_sata"); - if (IS_ERR(clk_sclk_sata)) { - dev_err(dev, "failed to get sclk_sata\n"); - ret = PTR_ERR(clk_sclk_sata); - clk_sclk_sata = NULL; - goto err4; - } - clk_enable(clk_sclk_sata); - clk_set_rate(clk_sclk_sata, SCLK_SATA_FREQ); - - __raw_writel(S5P_PMU_SATA_PHY_CONTROL_EN, S5P_PMU_SATA_PHY_CONTROL); - - /* Enable PHY link control */ - val = SATA_CTRL1_RST_PMALIVE_N | SATA_CTRL1_RST_RXOOB_N | - SATA_CTRL1_RST_RX_N | SATA_CTRL1_RST_TX_N; - __raw_writel(val, phy_ctrl + SATA_CTRL1); - - /* Set communication speed as 3Gbps and enable PHY power */ - val = SATA_CTRL0_RX_DATA_VALID(3) | SATA_CTRL0_SPEED_MODE | - SATA_CTRL0_PHY_POR_N; - __raw_writel(val, phy_ctrl + SATA_CTRL0); - - /* Port0 is available */ - __raw_writel(0x1, mmio + HOST_PORTS_IMPL); - - return ahci_phy_init(mmio); - -err4: - clk_disable(clk_sataphy); - clk_put(clk_sataphy); -err3: - clk_disable(clk_sata); - clk_put(clk_sata); -err2: - iounmap(phy_ctrl); -err1: - iounmap(phy_base); - - return ret; -} - -static struct ahci_platform_data exynos4_ahci_pdata = { - .init = exynos4_ahci_init, -}; - -static struct resource exynos4_ahci_resource[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_SATA, SZ_64K), - [1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_SATA), -}; - -static u64 exynos4_ahci_dmamask = DMA_BIT_MASK(32); - -struct platform_device exynos4_device_ahci = { - .name = "ahci", - .id = -1, - .resource = exynos4_ahci_resource, - .num_resources = ARRAY_SIZE(exynos4_ahci_resource), - .dev = { - .platform_data = &exynos4_ahci_pdata, - .dma_mask = &exynos4_ahci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; diff --git a/arch/arm/mach-exynos/dev-ohci.c b/arch/arm/mach-exynos/dev-ohci.c deleted file mode 100644 index d5bc129e6bb7..000000000000 --- a/arch/arm/mach-exynos/dev-ohci.c +++ /dev/null @@ -1,52 +0,0 @@ -/* linux/arch/arm/mach-exynos/dev-ohci.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - OHCI support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include - -#include -#include - -#include -#include - -static struct resource exynos4_ohci_resource[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_OHCI, SZ_256), - [1] = DEFINE_RES_IRQ(IRQ_USB_HOST), -}; - -static u64 exynos4_ohci_dma_mask = DMA_BIT_MASK(32); - -struct platform_device exynos4_device_ohci = { - .name = "exynos-ohci", - .id = -1, - .num_resources = ARRAY_SIZE(exynos4_ohci_resource), - .resource = exynos4_ohci_resource, - .dev = { - .dma_mask = &exynos4_ohci_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - } -}; - -void __init exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd) -{ - struct exynos4_ohci_platdata *npd; - - npd = s3c_set_platdata(pd, sizeof(struct exynos4_ohci_platdata), - &exynos4_device_ohci); - - if (!npd->phy_init) - npd->phy_init = s5p_usb_phy_init; - if (!npd->phy_exit) - npd->phy_exit = s5p_usb_phy_exit; -} diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c deleted file mode 100644 index 87e07d6fc615..000000000000 --- a/arch/arm/mach-exynos/dma.c +++ /dev/null @@ -1,322 +0,0 @@ -/* linux/arch/arm/mach-exynos4/dma.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include - -static u8 exynos4210_pdma0_peri[] = { - DMACH_PCM0_RX, - DMACH_PCM0_TX, - DMACH_PCM2_RX, - DMACH_PCM2_TX, - DMACH_MSM_REQ0, - DMACH_MSM_REQ2, - DMACH_SPI0_RX, - DMACH_SPI0_TX, - DMACH_SPI2_RX, - DMACH_SPI2_TX, - DMACH_I2S0S_TX, - DMACH_I2S0_RX, - DMACH_I2S0_TX, - DMACH_I2S2_RX, - DMACH_I2S2_TX, - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART2_RX, - DMACH_UART2_TX, - DMACH_UART4_RX, - DMACH_UART4_TX, - DMACH_SLIMBUS0_RX, - DMACH_SLIMBUS0_TX, - DMACH_SLIMBUS2_RX, - DMACH_SLIMBUS2_TX, - DMACH_SLIMBUS4_RX, - DMACH_SLIMBUS4_TX, - DMACH_AC97_MICIN, - DMACH_AC97_PCMIN, - DMACH_AC97_PCMOUT, -}; - -static u8 exynos4212_pdma0_peri[] = { - DMACH_PCM0_RX, - DMACH_PCM0_TX, - DMACH_PCM2_RX, - DMACH_PCM2_TX, - DMACH_MIPI_HSI0, - DMACH_MIPI_HSI1, - DMACH_SPI0_RX, - DMACH_SPI0_TX, - DMACH_SPI2_RX, - DMACH_SPI2_TX, - DMACH_I2S0S_TX, - DMACH_I2S0_RX, - DMACH_I2S0_TX, - DMACH_I2S2_RX, - DMACH_I2S2_TX, - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART2_RX, - DMACH_UART2_TX, - DMACH_UART4_RX, - DMACH_UART4_TX, - DMACH_SLIMBUS0_RX, - DMACH_SLIMBUS0_TX, - DMACH_SLIMBUS2_RX, - DMACH_SLIMBUS2_TX, - DMACH_SLIMBUS4_RX, - DMACH_SLIMBUS4_TX, - DMACH_AC97_MICIN, - DMACH_AC97_PCMIN, - DMACH_AC97_PCMOUT, - DMACH_MIPI_HSI4, - DMACH_MIPI_HSI5, -}; - -static u8 exynos5250_pdma0_peri[] = { - DMACH_PCM0_RX, - DMACH_PCM0_TX, - DMACH_PCM2_RX, - DMACH_PCM2_TX, - DMACH_SPI0_RX, - DMACH_SPI0_TX, - DMACH_SPI2_RX, - DMACH_SPI2_TX, - DMACH_I2S0S_TX, - DMACH_I2S0_RX, - DMACH_I2S0_TX, - DMACH_I2S2_RX, - DMACH_I2S2_TX, - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART2_RX, - DMACH_UART2_TX, - DMACH_UART4_RX, - DMACH_UART4_TX, - DMACH_SLIMBUS0_RX, - DMACH_SLIMBUS0_TX, - DMACH_SLIMBUS2_RX, - DMACH_SLIMBUS2_TX, - DMACH_SLIMBUS4_RX, - DMACH_SLIMBUS4_TX, - DMACH_AC97_MICIN, - DMACH_AC97_PCMIN, - DMACH_AC97_PCMOUT, - DMACH_MIPI_HSI0, - DMACH_MIPI_HSI2, - DMACH_MIPI_HSI4, - DMACH_MIPI_HSI6, -}; - -static struct dma_pl330_platdata exynos_pdma0_pdata; - -static AMBA_AHB_DEVICE(exynos_pdma0, "dma-pl330.0", 0x00041330, - EXYNOS4_PA_PDMA0, {EXYNOS4_IRQ_PDMA0}, &exynos_pdma0_pdata); - -static u8 exynos4210_pdma1_peri[] = { - DMACH_PCM0_RX, - DMACH_PCM0_TX, - DMACH_PCM1_RX, - DMACH_PCM1_TX, - DMACH_MSM_REQ1, - DMACH_MSM_REQ3, - DMACH_SPI1_RX, - DMACH_SPI1_TX, - DMACH_I2S0S_TX, - DMACH_I2S0_RX, - DMACH_I2S0_TX, - DMACH_I2S1_RX, - DMACH_I2S1_TX, - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART1_RX, - DMACH_UART1_TX, - DMACH_UART3_RX, - DMACH_UART3_TX, - DMACH_SLIMBUS1_RX, - DMACH_SLIMBUS1_TX, - DMACH_SLIMBUS3_RX, - DMACH_SLIMBUS3_TX, - DMACH_SLIMBUS5_RX, - DMACH_SLIMBUS5_TX, -}; - -static u8 exynos4212_pdma1_peri[] = { - DMACH_PCM0_RX, - DMACH_PCM0_TX, - DMACH_PCM1_RX, - DMACH_PCM1_TX, - DMACH_MIPI_HSI2, - DMACH_MIPI_HSI3, - DMACH_SPI1_RX, - DMACH_SPI1_TX, - DMACH_I2S0S_TX, - DMACH_I2S0_RX, - DMACH_I2S0_TX, - DMACH_I2S1_RX, - DMACH_I2S1_TX, - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART1_RX, - DMACH_UART1_TX, - DMACH_UART3_RX, - DMACH_UART3_TX, - DMACH_SLIMBUS1_RX, - DMACH_SLIMBUS1_TX, - DMACH_SLIMBUS3_RX, - DMACH_SLIMBUS3_TX, - DMACH_SLIMBUS5_RX, - DMACH_SLIMBUS5_TX, - DMACH_SLIMBUS0AUX_RX, - DMACH_SLIMBUS0AUX_TX, - DMACH_SPDIF, - DMACH_MIPI_HSI6, - DMACH_MIPI_HSI7, -}; - -static u8 exynos5250_pdma1_peri[] = { - DMACH_PCM0_RX, - DMACH_PCM0_TX, - DMACH_PCM1_RX, - DMACH_PCM1_TX, - DMACH_SPI1_RX, - DMACH_SPI1_TX, - DMACH_PWM, - DMACH_SPDIF, - DMACH_I2S0S_TX, - DMACH_I2S0_RX, - DMACH_I2S0_TX, - DMACH_I2S1_RX, - DMACH_I2S1_TX, - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART1_RX, - DMACH_UART1_TX, - DMACH_UART3_RX, - DMACH_UART3_TX, - DMACH_SLIMBUS1_RX, - DMACH_SLIMBUS1_TX, - DMACH_SLIMBUS3_RX, - DMACH_SLIMBUS3_TX, - DMACH_SLIMBUS5_RX, - DMACH_SLIMBUS5_TX, - DMACH_SLIMBUS0AUX_RX, - DMACH_SLIMBUS0AUX_TX, - DMACH_DISP1, - DMACH_MIPI_HSI1, - DMACH_MIPI_HSI3, - DMACH_MIPI_HSI5, - DMACH_MIPI_HSI7, -}; - -static struct dma_pl330_platdata exynos_pdma1_pdata; - -static AMBA_AHB_DEVICE(exynos_pdma1, "dma-pl330.1", 0x00041330, - EXYNOS4_PA_PDMA1, {EXYNOS4_IRQ_PDMA1}, &exynos_pdma1_pdata); - -static u8 mdma_peri[] = { - DMACH_MTOM_0, - DMACH_MTOM_1, - DMACH_MTOM_2, - DMACH_MTOM_3, - DMACH_MTOM_4, - DMACH_MTOM_5, - DMACH_MTOM_6, - DMACH_MTOM_7, -}; - -static struct dma_pl330_platdata exynos_mdma1_pdata = { - .nr_valid_peri = ARRAY_SIZE(mdma_peri), - .peri_id = mdma_peri, -}; - -static AMBA_AHB_DEVICE(exynos_mdma1, "dma-pl330.2", 0x00041330, - EXYNOS4_PA_MDMA1, {EXYNOS4_IRQ_MDMA1}, &exynos_mdma1_pdata); - -static int __init exynos_dma_init(void) -{ - if (of_have_populated_dt()) - return 0; - - if (soc_is_exynos4210()) { - exynos_pdma0_pdata.nr_valid_peri = - ARRAY_SIZE(exynos4210_pdma0_peri); - exynos_pdma0_pdata.peri_id = exynos4210_pdma0_peri; - exynos_pdma1_pdata.nr_valid_peri = - ARRAY_SIZE(exynos4210_pdma1_peri); - exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri; - - if (samsung_rev() == EXYNOS4210_REV_0) - exynos_mdma1_device.res.start = EXYNOS4_PA_S_MDMA1; - } else if (soc_is_exynos4212() || soc_is_exynos4412()) { - exynos_pdma0_pdata.nr_valid_peri = - ARRAY_SIZE(exynos4212_pdma0_peri); - exynos_pdma0_pdata.peri_id = exynos4212_pdma0_peri; - exynos_pdma1_pdata.nr_valid_peri = - ARRAY_SIZE(exynos4212_pdma1_peri); - exynos_pdma1_pdata.peri_id = exynos4212_pdma1_peri; - } else if (soc_is_exynos5250()) { - exynos_pdma0_pdata.nr_valid_peri = - ARRAY_SIZE(exynos5250_pdma0_peri); - exynos_pdma0_pdata.peri_id = exynos5250_pdma0_peri; - exynos_pdma1_pdata.nr_valid_peri = - ARRAY_SIZE(exynos5250_pdma1_peri); - exynos_pdma1_pdata.peri_id = exynos5250_pdma1_peri; - - exynos_pdma0_device.res.start = EXYNOS5_PA_PDMA0; - exynos_pdma0_device.res.end = EXYNOS5_PA_PDMA0 + SZ_4K; - exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_PDMA0; - exynos_pdma1_device.res.start = EXYNOS5_PA_PDMA1; - exynos_pdma1_device.res.end = EXYNOS5_PA_PDMA1 + SZ_4K; - exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_PDMA1; - exynos_mdma1_device.res.start = EXYNOS5_PA_MDMA1; - exynos_mdma1_device.res.end = EXYNOS5_PA_MDMA1 + SZ_4K; - exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_MDMA1; - } - - dma_cap_set(DMA_SLAVE, exynos_pdma0_pdata.cap_mask); - dma_cap_set(DMA_CYCLIC, exynos_pdma0_pdata.cap_mask); - dma_cap_set(DMA_PRIVATE, exynos_pdma0_pdata.cap_mask); - amba_device_register(&exynos_pdma0_device, &iomem_resource); - - dma_cap_set(DMA_SLAVE, exynos_pdma1_pdata.cap_mask); - dma_cap_set(DMA_CYCLIC, exynos_pdma1_pdata.cap_mask); - dma_cap_set(DMA_PRIVATE, exynos_pdma1_pdata.cap_mask); - amba_device_register(&exynos_pdma1_device, &iomem_resource); - - dma_cap_set(DMA_MEMCPY, exynos_mdma1_pdata.cap_mask); - amba_device_register(&exynos_mdma1_device, &iomem_resource); - - return 0; -} -arch_initcall(exynos_dma_init); diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 9f1351de52f7..beb946d86fa3 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -84,7 +84,6 @@ static struct exynos_pm_domain PD = { \ }, \ } -#ifdef CONFIG_OF static void exynos_add_device_to_domain(struct exynos_pm_domain *pd, struct device *dev) { @@ -193,12 +192,6 @@ static __init int exynos_pm_dt_parse_domains(void) return 0; } -#else -static __init int exynos_pm_dt_parse_domains(void) -{ - return 0; -} -#endif /* CONFIG_OF */ static __init __maybe_unused void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, struct exynos_pm_domain *pd) -- 2.30.2