From 3c583f70a8e2feda03db77d2c8e9a41d302ac657 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 12 Nov 2014 23:10:08 +0100 Subject: [PATCH] mmc: mvsdio: Work around broken TX DMA In order to use the mvsdio driver for sdio, it has been necessary to use a module parameter to disable DMA so to force PIO is used. It is then possible to use wireless LAN devices like mwifiex found on topkick and mirabox. However, accessing an MMC SD card does work with DMA. Investigation has shown that MMC block device accesses are always aligned to 64 byte boundaries, where as transfers from mwifiex are rarely more than word aligned. It has also been determined that card to host transfers work with DMA for SDIO devices, but host to card transfers with DMA have problems. This patch extends the current checks for buffers which are not word aligned or multiple of words. All host to card transfers which are not 64 byte aligned are now also performed via PIO. This should not affect the performance of SD cards, but allow sdio devices to work out of the box, and they are likely to be more efficient since DMA will be used for card to host transfers. Tested on mirabox for wifi via mwifiex Tested on 370 RD for file systems on an SD card. Signed-off-by: Andrew Lunn Signed-off-by: Ulf Hansson --- drivers/mmc/host/mvsdio.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c index 6b4c5ad3b393..4f8618f4522d 100644 --- a/drivers/mmc/host/mvsdio.c +++ b/drivers/mmc/host/mvsdio.c @@ -111,10 +111,15 @@ static int mvsd_setup_data(struct mvsd_host *host, struct mmc_data *data) mvsd_write(MVSD_BLK_COUNT, data->blocks); mvsd_write(MVSD_BLK_SIZE, data->blksz); - if (nodma || (data->blksz | data->sg->offset) & 3) { + if (nodma || (data->blksz | data->sg->offset) & 3 || + ((!(data->flags & MMC_DATA_READ) && data->sg->offset & 0x3f))) { /* * We cannot do DMA on a buffer which offset or size * is not aligned on a 4-byte boundary. + * + * It also appears the host to card DMA can corrupt + * data when the buffer is not aligned on a 64 byte + * boundary. */ host->pio_size = data->blocks * data->blksz; host->pio_ptr = sg_virt(data->sg); -- 2.30.2