From 3e8b1eb21c8b9806928000bf733e5762a64a7f72 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 16 Mar 2013 17:00:25 +0100 Subject: [PATCH] mac80211/minstrel_ht: improve rate selection stability Under load, otherwise stable rates can easily fluctuate because of collisions. In my tests on a clean channel, the success probability of the max throughput rate often stays somewhere between 90% and 100% under load. This can cause some unnecessary switching to lower rates. This patch improves stability by treating success probability values between 90% and 100% the same. In my tests on a 3x3 HT20 link with lots of TCP traffic, it improves the average throughput by a few mbit/s. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/rc80211_minstrel_ht.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index 749552bdcfe1..90499c421702 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -202,14 +202,23 @@ minstrel_ht_calc_tp(struct minstrel_ht_sta *mi, int group, int rate) struct minstrel_rate_stats *mr; unsigned int nsecs = 0; unsigned int tp; + unsigned int prob; mr = &mi->groups[group].rates[rate]; + prob = mr->probability; - if (mr->probability < MINSTREL_FRAC(1, 10)) { + if (prob < MINSTREL_FRAC(1, 10)) { mr->cur_tp = 0; return; } + /* + * For the throughput calculation, limit the probability value to 90% to + * account for collision related packet error rate fluctuation + */ + if (prob > MINSTREL_FRAC(9, 10)) + prob = MINSTREL_FRAC(9, 10); + if (group != MINSTREL_CCK_GROUP) nsecs = 1000 * mi->overhead / MINSTREL_TRUNC(mi->avg_ampdu_len); -- 2.30.2