From 3fc78609615fc88133bc8fb9eff2c6f7b02f7684 Mon Sep 17 00:00:00 2001
From: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Date: Fri, 11 Sep 2020 18:01:19 +0200
Subject: [PATCH] ramips: assign LEDs for RAVPower RP-WD03

According to the User Manual, there is a "Wi-Fi LED" with blue and
green colors, doing the following by default:

  Flashing Blue: System loading
  Solid Blue: System loaded
  Flashing Green: Connecting to the Internet
  Solid Green: Connected to the Internet

According to this vendor behavior, we keep refer to the LED as "wifi"
but implement the according default behavior as in OEM firmware.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
---
 target/linux/ramips/dts/mt7620n_ravpower_rp-wd03.dts      | 8 ++++++--
 target/linux/ramips/mt7620/base-files/etc/board.d/01_leds | 3 +++
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/target/linux/ramips/dts/mt7620n_ravpower_rp-wd03.dts b/target/linux/ramips/dts/mt7620n_ravpower_rp-wd03.dts
index 82b8a6b83f..0078103da3 100644
--- a/target/linux/ramips/dts/mt7620n_ravpower_rp-wd03.dts
+++ b/target/linux/ramips/dts/mt7620n_ravpower_rp-wd03.dts
@@ -11,6 +11,10 @@
 
 	aliases {
 		label-mac-device = &ethernet;
+		led-boot = &led_wifi_blue;
+		led-failsafe = &led_wifi_blue;
+		led-running = &led_wifi_blue;
+		led-upgrade = &led_wifi_blue;
 	};
 
 	chosen {
@@ -20,12 +24,12 @@
 	leds {
 		compatible = "gpio-leds";
 
-		green-wifi {
+		wifi_green {
 			label = "rp-wd03:green:wifi";
 			gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
 		};
 
-		blue-wifi {
+		led_wifi_blue: wifi_blue {
 			label = "rp-wd03:blue:wifi";
 			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
index 90d1596783..ec86ed4b3f 100755
--- a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
@@ -179,6 +179,9 @@ planex,mzk-ex750np|\
 zbtlink,zbt-we826-e)
 	set_wifi_led "$boardname:red:wifi"
 	;;
+ravpower,rp-wd03)
+	ucidef_set_led_netdev "internet" "internet" "$boardname:green:wifi" "eth0"
+	;;
 tplink,archer-c2-v1)
 	ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch1" "0x1e"
 	ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch1" "0x01"
-- 
2.30.2