From 416379f9ebded501eda882e6af0a7aafc1866700 Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Fri, 14 Oct 2016 23:54:55 +0200 Subject: [PATCH] PCI: designware: Check for iATU unroll support after initializing host dw_pcie_iatu_unroll_enabled() reads a dbi_base register. Reading any dbi_base register before pp->ops->host_init has been called causes "imprecise external abort" on platforms like ARTPEC-6, where the PCIe module is disabled at boot and first enabled in pp->ops->host_init. Move dw_pcie_iatu_unroll_enabled() to dw_pcie_setup_rc(), since it is after pp->ops->host_init, but before pp->iatu_unroll_enabled is actually used. Fixes: a0601a470537 ("PCI: designware: Add iATU Unroll feature") Tested-by: James Le Cuirot Signed-off-by: Niklas Cassel Signed-off-by: Bjorn Helgaas Acked-by: Joao Pinto Acked-by: Olof Johansson --- drivers/pci/host/pcie-designware.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c index 035f50c03281..bed19994c1e9 100644 --- a/drivers/pci/host/pcie-designware.c +++ b/drivers/pci/host/pcie-designware.c @@ -637,8 +637,6 @@ int dw_pcie_host_init(struct pcie_port *pp) } } - pp->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pp); - if (pp->ops->host_init) pp->ops->host_init(pp); @@ -809,6 +807,11 @@ void dw_pcie_setup_rc(struct pcie_port *pp) { u32 val; + /* get iATU unroll support */ + pp->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pp); + dev_dbg(pp->dev, "iATU unroll: %s\n", + pp->iatu_unroll_enabled ? "enabled" : "disabled"); + /* set the number of lanes */ val = dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL); val &= ~PORT_LINK_MODE_MASK; -- 2.30.2