From 42dc5c2a3fb680c481200ce8da5a772af83428f6 Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Wed, 8 Jul 2020 13:36:54 +0200 Subject: [PATCH] ramips: improve LED support for D-Link DIR-615 D series This patch adds a trigger for the WAN LED and enhances support for the WiFi LED by enabling activity indication. This is based on bug report feedback (see reference below). While at it, update the LED node names in DTS file. Fixes: FS#732 Signed-off-by: Adrian Schmutzler --- target/linux/ramips/dts/rt3050_dlink_dir-615-d.dts | 8 ++++---- target/linux/ramips/rt305x/base-files/etc/board.d/01_leds | 5 ++++- 2 files changed, 8 insertions(+), 5 deletions(-) diff --git a/target/linux/ramips/dts/rt3050_dlink_dir-615-d.dts b/target/linux/ramips/dts/rt3050_dlink_dir-615-d.dts index fa415eb948..94372b2665 100644 --- a/target/linux/ramips/dts/rt3050_dlink_dir-615-d.dts +++ b/target/linux/ramips/dts/rt3050_dlink_dir-615-d.dts @@ -74,23 +74,23 @@ leds { compatible = "gpio-leds"; - status { + status_amber { label = "dir-615-d:amber:status"; gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; }; - led_status_green: status2 { + led_status_green: status_green { label = "dir-615-d:green:status"; gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; default-state = "on"; }; - wan { + wan_amber { label = "dir-615-d:amber:wan"; gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; }; - wan2 { + wan_green { label = "dir-615-d:green:wan"; gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; }; diff --git a/target/linux/ramips/rt305x/base-files/etc/board.d/01_leds b/target/linux/ramips/rt305x/base-files/etc/board.d/01_leds index ae813e85d6..8260b09821 100755 --- a/target/linux/ramips/rt305x/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/rt305x/base-files/etc/board.d/01_leds @@ -33,7 +33,6 @@ dlink,dir-300-b7|\ dlink,dir-320-b1|\ dlink,dir-600-b1|\ dlink,dir-610-a1|\ -dlink,dir-615-d|\ dlink,dir-615-h1|\ dlink,dir-620-a1|\ engenius,esr-9753|\ @@ -66,6 +65,10 @@ asiarf,awapn2403) dlink,dcs-930l-b1) ucidef_set_led_netdev "wifi" "WiFi" "$boardname:blue:wps" ;; +dlink,dir-615-d) + ucidef_set_led_netdev "wan" "WAN (green)" "$boardname:green:wan" "eth0.2" + set_wifi_led "rt2800soc-phy0::radio" + ;; dlink,dir-620-d1|\ trendnet,tew-714tru) set_wifi_led "$boardname:green:wifi" -- 2.30.2