From 4a5b85ffe2a001b52d165931ad05d2d620daca3c Mon Sep 17 00:00:00 2001 From: Vivien Didelot Date: Thu, 26 Oct 2017 11:22:55 -0400 Subject: [PATCH] net: dsa: use dsa_is_user_port everywhere Most of the DSA code still check ds->enabled_port_mask directly to inspect a given port type instead of using the provided dsa_is_user_port helper. Change this. Signed-off-by: Vivien Didelot Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.c | 9 ++++----- drivers/net/dsa/bcm_sf2_cfp.c | 2 +- drivers/net/dsa/mt7530.c | 4 ++-- drivers/net/dsa/qca8k.c | 4 ++-- net/dsa/dsa.c | 2 +- net/dsa/legacy.c | 4 ++-- 6 files changed, 12 insertions(+), 13 deletions(-) diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 2574a52ee161..7f47400e557e 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -652,8 +652,7 @@ static int bcm_sf2_sw_suspend(struct dsa_switch *ds) * bcm_sf2_sw_setup */ for (port = 0; port < DSA_MAX_PORTS; port++) { - if ((1 << port) & ds->enabled_port_mask || - dsa_is_cpu_port(ds, port)) + if (dsa_is_user_port(ds, port) || dsa_is_cpu_port(ds, port)) bcm_sf2_port_disable(ds, port, NULL); } @@ -676,7 +675,7 @@ static int bcm_sf2_sw_resume(struct dsa_switch *ds) bcm_sf2_gphy_enable_set(ds, true); for (port = 0; port < DSA_MAX_PORTS; port++) { - if ((1 << port) & ds->enabled_port_mask) + if (dsa_is_user_port(ds, port)) bcm_sf2_port_setup(ds, port, NULL); else if (dsa_is_cpu_port(ds, port)) bcm_sf2_imp_setup(ds, port); @@ -771,7 +770,7 @@ static void bcm_sf2_sw_configure_vlan(struct dsa_switch *ds) bcm_sf2_vlan_op(priv, ARLA_VTBL_CMD_CLEAR); for (port = 0; port < priv->hw_params.num_ports; port++) { - if (!((1 << port) & ds->enabled_port_mask)) + if (!dsa_is_user_port(ds, port)) continue; core_writel(priv, 1, CORE_DEFAULT_1Q_TAG_P(port)); @@ -786,7 +785,7 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds) /* Enable all valid ports and disable those unused */ for (port = 0; port < priv->hw_params.num_ports; port++) { /* IMP port receives special treatment */ - if ((1 << port) & ds->enabled_port_mask) + if (dsa_is_user_port(ds, port)) bcm_sf2_port_setup(ds, port, NULL); else if (dsa_is_cpu_port(ds, port)) bcm_sf2_imp_setup(ds, port); diff --git a/drivers/net/dsa/bcm_sf2_cfp.c b/drivers/net/dsa/bcm_sf2_cfp.c index 4feb507eeee0..b721a2009b50 100644 --- a/drivers/net/dsa/bcm_sf2_cfp.c +++ b/drivers/net/dsa/bcm_sf2_cfp.c @@ -750,7 +750,7 @@ static int bcm_sf2_cfp_rule_set(struct dsa_switch *ds, int port, port_num = fs->ring_cookie / SF2_NUM_EGRESS_QUEUES; if (fs->ring_cookie == RX_CLS_FLOW_DISC || - !(BIT(port_num) & ds->enabled_port_mask) || + !dsa_is_user_port(ds, port_num) || port_num >= priv->hw_params.num_ports) return -EINVAL; /* diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 21431be2831e..d1d4eea6a875 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -781,7 +781,7 @@ mt7530_port_bridge_join(struct dsa_switch *ds, int port, * same bridge. If the port is disabled, port matrix is kept * and not being setup until the port becomes enabled. */ - if (ds->enabled_port_mask & BIT(i) && i != port) { + if (dsa_is_user_port(ds, i) && i != port) { if (dsa_to_port(ds, i)->bridge_dev != bridge) continue; if (priv->ports[i].enable) @@ -818,7 +818,7 @@ mt7530_port_bridge_leave(struct dsa_switch *ds, int port, * in the same bridge. If the port is disabled, port matrix * is kept and not being setup until the port becomes enabled. */ - if (ds->enabled_port_mask & BIT(i) && i != port) { + if (dsa_is_user_port(ds, i) && i != port) { if (dsa_to_port(ds, i)->bridge_dev != bridge) continue; if (priv->ports[i].enable) diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c index d1b0b1fb632f..37125858fe80 100644 --- a/drivers/net/dsa/qca8k.c +++ b/drivers/net/dsa/qca8k.c @@ -536,7 +536,7 @@ qca8k_setup(struct dsa_switch *ds) /* Disable MAC by default on all user ports */ for (i = 1; i < QCA8K_NUM_PORTS; i++) - if (ds->enabled_port_mask & BIT(i)) + if (dsa_is_user_port(ds, i)) qca8k_port_set_status(priv, i, 0); /* Forward all unknown frames to CPU port for Linux processing */ @@ -556,7 +556,7 @@ qca8k_setup(struct dsa_switch *ds) } /* Invividual user ports get connected to CPU port only */ - if (ds->enabled_port_mask & BIT(i)) { + if (dsa_is_user_port(ds, i)) { int shift = 16 * (i % 2); qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c index a3abf7a7b9a2..fe0081730305 100644 --- a/net/dsa/dsa.c +++ b/net/dsa/dsa.c @@ -201,7 +201,7 @@ static int dsa_switch_rcv(struct sk_buff *skb, struct net_device *dev, #ifdef CONFIG_PM_SLEEP static bool dsa_is_port_initialized(struct dsa_switch *ds, int p) { - return ds->enabled_port_mask & (1 << p) && ds->ports[p].slave; + return dsa_is_user_port(ds, p) && ds->ports[p].slave; } int dsa_switch_suspend(struct dsa_switch *ds) diff --git a/net/dsa/legacy.c b/net/dsa/legacy.c index 93c1c43bcc58..0b79c6171d0d 100644 --- a/net/dsa/legacy.c +++ b/net/dsa/legacy.c @@ -190,7 +190,7 @@ static int dsa_switch_setup_one(struct dsa_switch *ds, ds->ports[i].dn = cd->port_dn[i]; ds->ports[i].cpu_dp = dst->cpu_dp; - if (!(ds->enabled_port_mask & (1 << i))) + if (dsa_is_user_port(ds, i)) continue; ret = dsa_slave_create(&ds->ports[i], cd->port_names[i]); @@ -258,7 +258,7 @@ static void dsa_switch_destroy(struct dsa_switch *ds) /* Destroy network devices for physical switch ports. */ for (port = 0; port < ds->num_ports; port++) { - if (!(ds->enabled_port_mask & (1 << port))) + if (!dsa_is_user_port(ds, port)) continue; if (!ds->ports[port].slave) -- 2.30.2