From 4ab7f9138147efbb3efab32a51a8da646769d740 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 15 May 2015 12:38:01 -0700 Subject: [PATCH] net: dsa: bcm_sf2: properly propagate carrier down state for MoCA MoCA interfaces require the use of an user-space daemon (mocad) which will typically use cmd->autoneg to force the link. This is causing other network manager applications not to get proper carrier down notifications because of the following sequence of events: - link down interrupt is received, link is set to 0 by the interrupt handler - fixed_link update callback runs and updates the BMSR register accordingly - PHY library polls the PHY for link status, sees the link is down, proceeds with reporting that - mocad gets notified of the link state and call phy_ethtool_sset() with cmd->autoneg set to the link status (0) - phy_start_aneg() is called at the end of phy_ethtool_sset() and sets the PHY state to PHY_FORCING Just make sure we notify the interface carrier appropriately when we detect that the link is down in our fixed_link update callback. This is made local to the bcm_sf2 driver as the PHY library does the right thing in any case. This is similar to the GENET change introduced in 54d7c01d3ed699cfc213115eaecfe1175cfaff8f ("net: bcmgenet: enable MoCA link state change detection"). Fixes: 246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index cedb572bf25a..103fde3da476 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -911,6 +911,13 @@ static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port, */ if (port == 7) { status->link = priv->port_sts[port].link; + /* For MoCA interfaces, also force a link down notification + * since some version of the user-space daemon (mocad) use + * cmd->autoneg to force the link, which messes up the PHY + * state machine and make it go in PHY_FORCING state instead. + */ + if (!status->link) + netif_carrier_off(ds->ports[port]); status->duplex = 1; } else { status->link = 1; -- 2.30.2