From 4dc4000b35119fb83266f978475f5881e263358e Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Mon, 26 Sep 2016 14:08:13 -0700 Subject: [PATCH] ixgbe: do not use ixgbe specific mdio defines Replace some ixgbe specific MDIO defines with their equivalent from the kernel. Signed-off-by: Emil Tantilov Tested-by: Krishneil Singh Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c | 8 +-- drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 16 ----- drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 65 +++++++++---------- 3 files changed, 33 insertions(+), 56 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c index 648739a3904a..ebf46afd08b0 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c @@ -2395,9 +2395,7 @@ s32 ixgbe_set_copper_phy_power(struct ixgbe_hw *hw, bool on) if (!on && ixgbe_mng_present(hw)) return 0; - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, - ®); + status = hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_VEND1, ®); if (status) return status; @@ -2409,8 +2407,6 @@ s32 ixgbe_set_copper_phy_power(struct ixgbe_hw *hw, bool on) reg |= IXGBE_MDIO_PHY_SET_LOW_POWER_MODE; } - status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, - reg); + status = hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_VEND1, reg); return status; } diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index 82813f98b8c1..6886e57d12f7 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -874,19 +874,13 @@ struct ixgbe_thermal_sensor_data { #define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB 0x4 /* 1Gb/s */ #define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB 0x6 /* 10Gb/s */ -#define IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG 0x20 /* 10G Control Reg */ #define IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG 0xC400 /* 1G Provisioning 1 */ #define IXGBE_MII_AUTONEG_XNP_TX_REG 0x17 /* 1G XNP Transmit */ -#define IXGBE_MII_AUTONEG_ADVERTISE_REG 0x10 /* 100M Advertisement */ -#define IXGBE_MII_10GBASE_T_ADVERTISE 0x1000 /* full duplex, bit:12*/ #define IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX 0x4000 /* full duplex, bit:14*/ #define IXGBE_MII_1GBASE_T_ADVERTISE 0x8000 /* full duplex, bit:15*/ #define IXGBE_MII_2_5GBASE_T_ADVERTISE 0x0400 #define IXGBE_MII_5GBASE_T_ADVERTISE 0x0800 -#define IXGBE_MII_100BASE_T_ADVERTISE 0x0100 /* full duplex, bit:8 */ -#define IXGBE_MII_100BASE_T_ADVERTISE_HALF 0x0080 /* half duplex, bit:7 */ #define IXGBE_MII_RESTART 0x200 -#define IXGBE_MII_AUTONEG_COMPLETE 0x20 #define IXGBE_MII_AUTONEG_LINK_UP 0x04 #define IXGBE_MII_AUTONEG_REG 0x0 @@ -1320,30 +1314,20 @@ struct ixgbe_thermal_sensor_data { /* MDIO definitions */ #define IXGBE_MDIO_ZERO_DEV_TYPE 0x0 -#define IXGBE_MDIO_PMA_PMD_DEV_TYPE 0x1 #define IXGBE_MDIO_PCS_DEV_TYPE 0x3 -#define IXGBE_MDIO_PHY_XS_DEV_TYPE 0x4 -#define IXGBE_MDIO_AUTO_NEG_DEV_TYPE 0x7 -#define IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE 0x1E /* Device 30 */ #define IXGBE_TWINAX_DEV 1 #define IXGBE_MDIO_COMMAND_TIMEOUT 100 /* PHY Timeout for 1 GB mode */ -#define IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL 0x0 /* VS1 Control Reg */ -#define IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS 0x1 /* VS1 Status Reg */ #define IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS 0x0008 /* 1 = Link Up */ #define IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS 0x0010 /* 0 - 10G, 1 - 1G */ #define IXGBE_MDIO_VENDOR_SPECIFIC_1_10G_SPEED 0x0018 #define IXGBE_MDIO_VENDOR_SPECIFIC_1_1G_SPEED 0x0010 -#define IXGBE_MDIO_AUTO_NEG_CONTROL 0x0 /* AUTO_NEG Control Reg */ -#define IXGBE_MDIO_AUTO_NEG_STATUS 0x1 /* AUTO_NEG Status Reg */ #define IXGBE_MDIO_AUTO_NEG_VENDOR_STAT 0xC800 /* AUTO_NEG Vendor Status Reg */ #define IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM 0xCC00 /* AUTO_NEG Vendor TX Reg */ #define IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2 0xCC01 /* AUTO_NEG Vendor Tx Reg */ #define IXGBE_MDIO_AUTO_NEG_VEN_LSC 0x1 /* AUTO_NEG Vendor Tx LSC */ -#define IXGBE_MDIO_AUTO_NEG_ADVT 0x10 /* AUTO_NEG Advt Reg */ -#define IXGBE_MDIO_AUTO_NEG_LP 0x13 /* AUTO_NEG LP Status Reg */ #define IXGBE_MDIO_AUTO_NEG_EEE_ADVT 0x3C /* AUTO_NEG EEE Advt Reg */ #define IXGBE_MDIO_PHY_SET_LOW_POWER_MODE 0x0800 /* Set low power mode */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c index f4385fcd7147..e9fa83baa00a 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c @@ -1571,8 +1571,7 @@ static s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw, /* MAC link is up, so check external PHY link. * Read this twice back to back to indicate current status. */ - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + status = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN, &autoneg_status); if (status) return status; @@ -1758,7 +1757,7 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc) /* Vendor alarm triggered */ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + MDIO_MMD_VEND1, ®); if (status || !(reg & IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN)) @@ -1766,7 +1765,7 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc) /* Vendor Auto-Neg alarm triggered or Global alarm 1 triggered */ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_FLAG, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + MDIO_MMD_VEND1, ®); if (status || !(reg & (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN | @@ -1775,7 +1774,7 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc) /* Global alarm triggered */ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_ALARM_1, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + MDIO_MMD_VEND1, ®); if (status) @@ -1790,7 +1789,7 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc) if (reg & IXGBE_MDIO_GLOBAL_ALM_1_DEV_FAULT) { /* device fault alarm triggered */ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_FAULT_MSG, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + MDIO_MMD_VEND1, ®); if (status) return status; @@ -1805,14 +1804,14 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc) /* Vendor alarm 2 triggered */ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®); + MDIO_MMD_AN, ®); if (status || !(reg & IXGBE_MDIO_GLOBAL_STD_ALM2_INT)) return status; /* link connect/disconnect event occurred */ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®); + MDIO_MMD_AN, ®); if (status) return status; @@ -1844,20 +1843,20 @@ static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw) /* Enable link status change alarm */ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®); + MDIO_MMD_AN, ®); if (status) return status; reg |= IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN; status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, reg); + MDIO_MMD_AN, reg); if (status) return status; /* Enable high temperature failure and global fault alarms */ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + MDIO_MMD_VEND1, ®); if (status) return status; @@ -1866,14 +1865,14 @@ static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw) IXGBE_MDIO_GLOBAL_INT_DEV_FAULT_EN); status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + MDIO_MMD_VEND1, reg); if (status) return status; /* Enable vendor Auto-Neg alarm and Global Interrupt Mask 1 alarm */ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + MDIO_MMD_VEND1, ®); if (status) return status; @@ -1882,14 +1881,14 @@ static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw) IXGBE_MDIO_GLOBAL_ALARM_1_INT); status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + MDIO_MMD_VEND1, reg); if (status) return status; /* Enable chip-wide vendor alarm */ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + MDIO_MMD_VEND1, ®); if (status) return status; @@ -1897,7 +1896,7 @@ static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw) reg |= IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN; status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + MDIO_MMD_VEND1, reg); return status; @@ -2038,14 +2037,12 @@ static s32 ixgbe_ext_phy_t_x550em_get_link(struct ixgbe_hw *hw, bool *link_up) *link_up = false; /* read this twice back to back to indicate current status */ - ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + ret = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN, &autoneg_status); if (ret) return ret; - ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + ret = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN, &autoneg_status); if (ret) return ret; @@ -2091,7 +2088,7 @@ static s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw) return 0; status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + MDIO_MMD_AN, &speed); if (status) return status; @@ -2152,10 +2149,10 @@ static s32 ixgbe_led_on_t_x550em(struct ixgbe_hw *hw, u32 led_idx) /* To turn on the LED, set mode to ON. */ hw->phy.ops.read_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, &phy_data); + MDIO_MMD_VEND1, &phy_data); phy_data |= IXGBE_X557_LED_MANUAL_SET_MASK; hw->phy.ops.write_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data); + MDIO_MMD_VEND1, phy_data); return 0; } @@ -2174,10 +2171,10 @@ static s32 ixgbe_led_off_t_x550em(struct ixgbe_hw *hw, u32 led_idx) /* To turn on the LED, set mode to ON. */ hw->phy.ops.read_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, &phy_data); + MDIO_MMD_VEND1, &phy_data); phy_data &= ~IXGBE_X557_LED_MANUAL_SET_MASK; hw->phy.ops.write_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data); + MDIO_MMD_VEND1, phy_data); return 0; } @@ -2198,7 +2195,7 @@ static s32 ixgbe_get_lcd_t_x550em(struct ixgbe_hw *hw, *lcd_speed = IXGBE_LINK_SPEED_UNKNOWN; status = hw->phy.ops.read_reg(hw, IXGBE_AUTO_NEG_LP_STATUS, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + MDIO_MMD_AN, &an_lp_status); if (status) return status; @@ -2345,7 +2342,7 @@ static s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw) return ixgbe_set_copper_phy_power(hw, false); status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + MDIO_MMD_AN, &speed); if (status) return status; @@ -2367,20 +2364,20 @@ static s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw) /* Clear AN completed indication */ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + MDIO_MMD_AN, &autoneg_reg); if (status) return status; - status = hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + status = hw->phy.ops.read_reg(hw, MDIO_AN_10GBT_CTRL, + MDIO_MMD_AN, &an_10g_cntl_reg); if (status) return status; status = hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + MDIO_MMD_AN, &autoneg_reg); if (status) return status; @@ -2538,7 +2535,7 @@ static s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw) status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_TX_VENDOR_ALARMS_3, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, + MDIO_MMD_PMAPMD, ®); if (status) return status; @@ -2549,7 +2546,7 @@ static s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw) if (reg & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) { status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_RES_PR_10, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + MDIO_MMD_VEND1, ®); if (status) return status; @@ -2558,7 +2555,7 @@ static s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw) status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_RES_PR_10, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + MDIO_MMD_VEND1, reg); if (status) return status; -- 2.30.2