From 4e8186b68fb944ad9e7fd4080cd8bd8f10eb7cbd Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 26 Jul 2012 02:31:14 +0000 Subject: [PATCH] e1000e: implement MDI/MDI-X control Some users report issues with link failing when connected to certain switches. This gives the user the ability to control the MDI state from the driver, allowing users to work around some improperly behaving switches. Forcing in this driver is for now only allowed when auto-neg is enabled. This is in regards to the related ethtool app patch and bugzilla.kernel.org bug 11998 Signed-off-by: Jesse Brandeburg CC: bruce.w.allan@intel.com CC: n.poppelier@xs4all.nl CC: bastien@durel.org CC: jsveiga@it.eng.br Tested-by: Aaron Brown aaron.f.brown@intel.com Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/ethtool.c | 41 ++++++++++++++++++++- 1 file changed, 39 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index 0349e2478df8..2e76f06720fd 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -199,6 +199,11 @@ static int e1000_get_settings(struct net_device *netdev, else ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID; + if (hw->phy.mdix == AUTO_ALL_MODES) + ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO; + else + ecmd->eth_tp_mdix_ctrl = hw->phy.mdix; + return 0; } @@ -241,6 +246,10 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx) default: goto err_inval; } + + /* clear MDI, MDI(-X) override is only allowed when autoneg enabled */ + adapter->hw.phy.mdix = AUTO_ALL_MODES; + return 0; err_inval: @@ -264,6 +273,22 @@ static int e1000_set_settings(struct net_device *netdev, return -EINVAL; } + /* + * MDI setting is only allowed when autoneg enabled because + * some hardware doesn't allow MDI setting when speed or + * duplex is forced. + */ + if (ecmd->eth_tp_mdix_ctrl) { + if (hw->phy.media_type != e1000_media_type_copper) + return -EOPNOTSUPP; + + if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) && + (ecmd->autoneg != AUTONEG_ENABLE)) { + e_err("forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n"); + return -EINVAL; + } + } + while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) usleep_range(1000, 2000); @@ -282,20 +307,32 @@ static int e1000_set_settings(struct net_device *netdev, hw->fc.requested_mode = e1000_fc_default; } else { u32 speed = ethtool_cmd_speed(ecmd); + /* calling this overrides forced MDI setting */ if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) { clear_bit(__E1000_RESETTING, &adapter->state); return -EINVAL; } } + /* MDI-X => 2; MDI => 1; Auto => 3 */ + if (ecmd->eth_tp_mdix_ctrl) { + /* + * fix up the value for auto (3 => 0) as zero is mapped + * internally to auto + */ + if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO) + hw->phy.mdix = AUTO_ALL_MODES; + else + hw->phy.mdix = ecmd->eth_tp_mdix_ctrl; + } + /* reset the link */ if (netif_running(adapter->netdev)) { e1000e_down(adapter); e1000e_up(adapter); - } else { + } else e1000e_reset(adapter); - } clear_bit(__E1000_RESETTING, &adapter->state); return 0; -- 2.30.2