From 550642098095652b7454199cc98986c01057da8e Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Mon, 22 Dec 2014 14:37:07 +0000
Subject: [PATCH] kernel: remove openwrt micrel.c (replaced by upstream driver)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43762
---
 .../generic/files/drivers/net/phy/micrel.c    | 83 -------------------
 .../generic/patches-3.14/728-phy-micrel.patch | 24 ------
 ...-rtl8367b.patch => 728-phy-rtl8367b.patch} |  4 +-
 .../generic/patches-3.14/729-phy-tantos.patch |  6 +-
 .../generic/patches-3.14/730-phy_b53.patch    |  6 +-
 .../generic/patches-3.18/728-phy-micrel.patch | 24 ------
 ...-rtl8367b.patch => 728-phy-rtl8367b.patch} |  4 +-
 .../generic/patches-3.18/729-phy-tantos.patch |  6 +-
 .../generic/patches-3.18/730-phy_b53.patch    |  6 +-
 9 files changed, 16 insertions(+), 147 deletions(-)
 delete mode 100644 target/linux/generic/files/drivers/net/phy/micrel.c
 delete mode 100644 target/linux/generic/patches-3.14/728-phy-micrel.patch
 rename target/linux/generic/patches-3.14/{729-phy-rtl8367b.patch => 728-phy-rtl8367b.patch} (88%)
 delete mode 100644 target/linux/generic/patches-3.18/728-phy-micrel.patch
 rename target/linux/generic/patches-3.18/{729-phy-rtl8367b.patch => 728-phy-rtl8367b.patch} (88%)

diff --git a/target/linux/generic/files/drivers/net/phy/micrel.c b/target/linux/generic/files/drivers/net/phy/micrel.c
deleted file mode 100644
index 1499d4ace4..0000000000
--- a/target/linux/generic/files/drivers/net/phy/micrel.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- *  Driver for Micrel/Kendin PHYs
- *
- *  Copyright (c) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/skbuff.h>
-#include <linux/phy.h>
-
-#define KSZ_REG_INT_CTRL	0x1b
-
-#define KSZ_INT_LU_EN	(1 << 8)	/* enable Link Up interrupt */
-#define KSZ_INT_RF_EN	(1 << 9)	/* enable Remote Fault interrupt */
-#define KSZ_INT_LD_EN	(1 << 10)	/* enable Link Down interrupt */
-
-#define KSZ_INT_INIT	(KSZ_INT_LU_EN | KSZ_INT_LD_EN)
-
-static int ksz8041_ack_interrupt(struct phy_device *phydev)
-{
-	int err;
-
-	err = phy_read(phydev, KSZ_REG_INT_CTRL);
-
-	return (err < 0) ? err : 0;
-}
-
-static int ksz8041_config_intr(struct phy_device *phydev)
-{
-	int err;
-
-	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
-		err = phy_write(phydev, KSZ_REG_INT_CTRL,
-				KSZ_INT_INIT);
-	else
-		err = phy_write(phydev, KSZ_REG_INT_CTRL, 0);
-
-	return err;
-}
-
-static struct phy_driver ksz8041_phy_driver = {
-	.phy_id		= 0x00221512,
-	.name		= "Micrel KSZ8041",
-	.phy_id_mask	= 0x001fffff,
-	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
-	.config_aneg	= genphy_config_aneg,
-	.read_status	= genphy_read_status,
-	.ack_interrupt	= ksz8041_ack_interrupt,
-	.config_intr	= ksz8041_config_intr,
-	.driver	= {
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init micrel_phy_init(void)
-{
-	return phy_driver_register(&ksz8041_phy_driver);
-}
-
-static void __exit micrel_phy_exit(void)
-{
-	phy_driver_unregister(&ksz8041_phy_driver);
-}
-
-#ifdef MODULE
-module_init(micrel_phy_init);
-module_exit(micrel_phy_exit);
-#else
-subsys_initcall(micrel_phy_init);
-#endif
-
-MODULE_DESCRIPTION("Micrel/Kendin PHY driver");
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>");
-MODULE_LICENSE("GPL v2");
diff --git a/target/linux/generic/patches-3.14/728-phy-micrel.patch b/target/linux/generic/patches-3.14/728-phy-micrel.patch
deleted file mode 100644
index baf5a4a7fd..0000000000
--- a/target/linux/generic/patches-3.14/728-phy-micrel.patch
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -144,6 +144,11 @@ config RTL8306_PHY
- 	tristate "Driver for Realtek RTL8306S switches"
- 	select SWCONFIG
- 
-+config MICREL_PHY
-+	tristate "Drivers for Micrel/Kendin PHYs"
-+	---help---
-+	  Currently has a driver for the KSZ8041
-+
- config FIXED_PHY
- 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
- 	depends on PHYLIB=y
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -28,6 +28,7 @@ obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
- obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb.o
- obj-$(CONFIG_RTL8367_PHY)	+= rtl8367.o
- obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
-+obj-$(CONFIG_MICREL_PHY)	+= micrel.o
- obj-$(CONFIG_FIXED_PHY)		+= fixed.o
- obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
- obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o
diff --git a/target/linux/generic/patches-3.14/729-phy-rtl8367b.patch b/target/linux/generic/patches-3.14/728-phy-rtl8367b.patch
similarity index 88%
rename from target/linux/generic/patches-3.14/729-phy-rtl8367b.patch
rename to target/linux/generic/patches-3.14/728-phy-rtl8367b.patch
index d69fc89e47..36a82311fe 100644
--- a/target/linux/generic/patches-3.14/729-phy-rtl8367b.patch
+++ b/target/linux/generic/patches-3.14/728-phy-rtl8367b.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -262,6 +262,10 @@ config RTL8367_PHY
+@@ -257,6 +257,10 @@ config RTL8367_PHY
  	tristate "Driver for the Realtek RTL8367R/M switches"
  	select SWCONFIG
  
@@ -19,5 +19,5 @@
  obj-$(CONFIG_RTL8367_PHY)	+= rtl8367.o
 +obj-$(CONFIG_RTL8367B_PHY)	+= rtl8367b.o
  obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
- obj-$(CONFIG_MICREL_PHY)	+= micrel.o
  obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
diff --git a/target/linux/generic/patches-3.14/729-phy-tantos.patch b/target/linux/generic/patches-3.14/729-phy-tantos.patch
index 4a9fe873a7..935193a58e 100644
--- a/target/linux/generic/patches-3.14/729-phy-tantos.patch
+++ b/target/linux/generic/patches-3.14/729-phy-tantos.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -273,3 +273,8 @@ endif # PHYLIB
+@@ -268,3 +268,8 @@ endif # PHYLIB
  config MICREL_KS8995MA
  	tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
  	depends on SPI
@@ -11,10 +11,10 @@
 +	select ETHERNET_PACKET_MANGLE
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -30,6 +30,7 @@ obj-$(CONFIG_RTL8367_PHY)	+= rtl8367.o
+@@ -29,6 +29,7 @@ obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb
+ obj-$(CONFIG_RTL8367_PHY)	+= rtl8367.o
  obj-$(CONFIG_RTL8367B_PHY)	+= rtl8367b.o
  obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
- obj-$(CONFIG_MICREL_PHY)	+= micrel.o
 +obj-$(CONFIG_PSB6970_PHY)	+= psb6970.o
  obj-$(CONFIG_FIXED_PHY)		+= fixed.o
  obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
diff --git a/target/linux/generic/patches-3.14/730-phy_b53.patch b/target/linux/generic/patches-3.14/730-phy_b53.patch
index cd58182f7e..27b8197e15 100644
--- a/target/linux/generic/patches-3.14/730-phy_b53.patch
+++ b/target/linux/generic/patches-3.14/730-phy_b53.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -268,6 +268,8 @@ config RTL8367B_PHY
+@@ -263,6 +263,8 @@ config RTL8367B_PHY
  
  endif # RTL8366_SMI
  
@@ -11,9 +11,9 @@
  config MICREL_KS8995MA
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -31,6 +31,7 @@ obj-$(CONFIG_RTL8367B_PHY)	+= rtl8367b.o
+@@ -30,6 +30,7 @@ obj-$(CONFIG_RTL8367_PHY)	+= rtl8367.o
+ obj-$(CONFIG_RTL8367B_PHY)	+= rtl8367b.o
  obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
- obj-$(CONFIG_MICREL_PHY)	+= micrel.o
  obj-$(CONFIG_PSB6970_PHY)	+= psb6970.o
 +obj-$(CONFIG_B53)		+= b53/
  obj-$(CONFIG_FIXED_PHY)		+= fixed.o
diff --git a/target/linux/generic/patches-3.18/728-phy-micrel.patch b/target/linux/generic/patches-3.18/728-phy-micrel.patch
deleted file mode 100644
index 95199a4348..0000000000
--- a/target/linux/generic/patches-3.18/728-phy-micrel.patch
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -156,6 +156,11 @@ config RTL8306_PHY
- 	tristate "Driver for Realtek RTL8306S switches"
- 	select SWCONFIG
- 
-+config MICREL_PHY
-+	tristate "Drivers for Micrel/Kendin PHYs"
-+	---help---
-+	  Currently has a driver for the KSZ8041
-+
- config FIXED_PHY
- 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
- 	depends on PHYLIB=y
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -29,6 +29,7 @@ obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
- obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb.o
- obj-$(CONFIG_RTL8367_PHY)	+= rtl8367.o
- obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
-+obj-$(CONFIG_MICREL_PHY)	+= micrel.o
- obj-$(CONFIG_FIXED_PHY)		+= fixed.o
- obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
- obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o
diff --git a/target/linux/generic/patches-3.18/729-phy-rtl8367b.patch b/target/linux/generic/patches-3.18/728-phy-rtl8367b.patch
similarity index 88%
rename from target/linux/generic/patches-3.18/729-phy-rtl8367b.patch
rename to target/linux/generic/patches-3.18/728-phy-rtl8367b.patch
index cc4f7940d2..958ff58907 100644
--- a/target/linux/generic/patches-3.18/729-phy-rtl8367b.patch
+++ b/target/linux/generic/patches-3.18/728-phy-rtl8367b.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -281,6 +281,10 @@ config RTL8367_PHY
+@@ -276,6 +276,10 @@ config RTL8367_PHY
  	tristate "Driver for the Realtek RTL8367R/M switches"
  	select SWCONFIG
  
@@ -19,5 +19,5 @@
  obj-$(CONFIG_RTL8367_PHY)	+= rtl8367.o
 +obj-$(CONFIG_RTL8367B_PHY)	+= rtl8367b.o
  obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
- obj-$(CONFIG_MICREL_PHY)	+= micrel.o
  obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
diff --git a/target/linux/generic/patches-3.18/729-phy-tantos.patch b/target/linux/generic/patches-3.18/729-phy-tantos.patch
index 6262ef9803..019f919492 100644
--- a/target/linux/generic/patches-3.18/729-phy-tantos.patch
+++ b/target/linux/generic/patches-3.18/729-phy-tantos.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -292,3 +292,8 @@ endif # PHYLIB
+@@ -287,3 +287,8 @@ endif # PHYLIB
  config MICREL_KS8995MA
  	tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
  	depends on SPI
@@ -11,10 +11,10 @@
 +	select ETHERNET_PACKET_MANGLE
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -31,6 +31,7 @@ obj-$(CONFIG_RTL8367_PHY)	+= rtl8367.o
+@@ -30,6 +30,7 @@ obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb
+ obj-$(CONFIG_RTL8367_PHY)	+= rtl8367.o
  obj-$(CONFIG_RTL8367B_PHY)	+= rtl8367b.o
  obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
- obj-$(CONFIG_MICREL_PHY)	+= micrel.o
 +obj-$(CONFIG_PSB6970_PHY)	+= psb6970.o
  obj-$(CONFIG_FIXED_PHY)		+= fixed.o
  obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
diff --git a/target/linux/generic/patches-3.18/730-phy_b53.patch b/target/linux/generic/patches-3.18/730-phy_b53.patch
index 5e13797630..c2dfcfa501 100644
--- a/target/linux/generic/patches-3.18/730-phy_b53.patch
+++ b/target/linux/generic/patches-3.18/730-phy_b53.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -287,6 +287,8 @@ config RTL8367B_PHY
+@@ -282,6 +282,8 @@ config RTL8367B_PHY
  
  endif # RTL8366_SMI
  
@@ -11,9 +11,9 @@
  config MICREL_KS8995MA
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -32,6 +32,7 @@ obj-$(CONFIG_RTL8367B_PHY)	+= rtl8367b.o
+@@ -31,6 +31,7 @@ obj-$(CONFIG_RTL8367_PHY)	+= rtl8367.o
+ obj-$(CONFIG_RTL8367B_PHY)	+= rtl8367b.o
  obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
- obj-$(CONFIG_MICREL_PHY)	+= micrel.o
  obj-$(CONFIG_PSB6970_PHY)	+= psb6970.o
 +obj-$(CONFIG_B53)		+= b53/
  obj-$(CONFIG_FIXED_PHY)		+= fixed.o
-- 
2.30.2