From 589f1053014f9c0df50b66159a831052afca3503 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Radek=20Dost=C3=A1l?= <rd@radekdostal.com> Date: Mon, 22 Oct 2018 22:34:17 +0200 Subject: [PATCH] ar71xx: switch TP-Link RE450 v1 to dynamic partitioning MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit As mentioned in commit 5f24933 recent changes on ar71xx (switch to 4.14, memory compaction, ...) cause an increase in kernel size, making it too big for RE450. RE450 images were not build due to the following error message: os-image partition too big (more than 1572864 bytes): Success Tested on RE450, device boots and was used to send this patch. Reported-by: Enrico Mioso <mrkiko.rs@gmail.com> Suggested-by: David Bauer <mail@david-bauer.net> Signed-off-by: Radek Dostál <rd@radekdostal.com> [rewrote commit msg keeping it tight + fixed SoB lines] Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> --- src/tplink-safeloader.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/src/tplink-safeloader.c b/src/tplink-safeloader.c index 78092bc..7f8a5d2 100644 --- a/src/tplink-safeloader.c +++ b/src/tplink-safeloader.c @@ -1103,15 +1103,10 @@ static struct device_info boards[] = { .support_trail = '\x00', .soft_ver = NULL, - /** - The flash partition table for RE450; - it is almost the same as the one used by the stock images, - 576KB were moved from file-system to os-image. - */ + /** We're using a dynamic kernel/rootfs split here */ .partitions = { {"fs-uboot", 0x00000, 0x20000}, - {"os-image", 0x20000, 0x180000}, - {"file-system", 0x1a0000, 0x460000}, + {"firmware", 0x20000, 0x5e0000}, {"partition-table", 0x600000, 0x02000}, {"default-mac", 0x610000, 0x00020}, {"pin", 0x610100, 0x00020}, -- 2.30.2