From 5955b2b0ef208e03188ef1c2810c004bde493253 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 4 Jun 2012 16:27:30 +0530 Subject: [PATCH] ath9k_hw: Fix MCI usage MCI has to be handled only when BTCOEX is actually enabled. Check for this condition before calling MCI related functions from various reset/calibration call-sites. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_calib.c | 5 ++--- drivers/net/wireless/ath/ath9k/ar9003_mci.h | 8 -------- drivers/net/wireless/ath/ath9k/hw.c | 15 +++++++-------- drivers/net/wireless/ath/ath9k/hw.h | 9 +++++++++ 4 files changed, 18 insertions(+), 19 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 9fdd70fcaf5b..f83a4a2e1da2 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -901,7 +901,6 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah, bool is_reusable = true, status = true; bool run_rtt_cal = false, run_agc_cal; bool rtt = !!(ah->caps.hw_caps & ATH9K_HW_CAP_RTT); - bool mci = !!(ah->caps.hw_caps & ATH9K_HW_CAP_MCI); u32 agc_ctrl = 0, agc_supp_cals = AR_PHY_AGC_CONTROL_OFFSET_CAL | AR_PHY_AGC_CONTROL_FLTR_CAL | AR_PHY_AGC_CONTROL_PKDET_CAL; @@ -970,7 +969,7 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah, } else if (caldata && !caldata->done_txiqcal_once) run_agc_cal = true; - if (mci && IS_CHAN_2GHZ(chan) && run_agc_cal) + if (ath9k_hw_mci_is_enabled(ah) && IS_CHAN_2GHZ(chan) && run_agc_cal) ar9003_mci_init_cal_req(ah, &is_reusable); if (!(IS_CHAN_HALF_RATE(chan) || IS_CHAN_QUARTER_RATE(chan))) { @@ -993,7 +992,7 @@ skip_tx_iqcal: 0, AH_WAIT_TIMEOUT); } - if (mci && IS_CHAN_2GHZ(chan) && run_agc_cal) + if (ath9k_hw_mci_is_enabled(ah) && IS_CHAN_2GHZ(chan) && run_agc_cal) ar9003_mci_init_cal_done(ah); if (rtt && !run_rtt_cal) { diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.h b/drivers/net/wireless/ath/ath9k/ar9003_mci.h index 4842f6c06b8c..652ab8c39e2b 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_mci.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.h @@ -273,10 +273,6 @@ void ar9003_mci_get_interrupt(struct ath_hw *ah, u32 *raw_intr, #ifdef CONFIG_ATH9K_BTCOEX_SUPPORT -static inline bool ar9003_mci_is_ready(struct ath_hw *ah) -{ - return ah->btcoex_hw.mci.ready; -} void ar9003_mci_stop_bt(struct ath_hw *ah, bool save_fullsleep); void ar9003_mci_init_cal_req(struct ath_hw *ah, bool *is_reusable); void ar9003_mci_init_cal_done(struct ath_hw *ah); @@ -292,10 +288,6 @@ void ar9003_mci_get_isr(struct ath_hw *ah, enum ath9k_int *masked); #else -static inline bool ar9003_mci_is_ready(struct ath_hw *ah) -{ - return false; -} static inline void ar9003_mci_stop_bt(struct ath_hw *ah, bool save_fullsleep) { } diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 42cf3c8db95b..a7231cadec40 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1707,7 +1707,7 @@ static int ath9k_hw_do_fastcc(struct ath_hw *ah, struct ath9k_channel *chan) ath9k_hw_loadnf(ah, ah->curchan); ath9k_hw_start_nfcal(ah, true); - if ((ah->caps.hw_caps & ATH9K_HW_CAP_MCI) && ar9003_mci_is_ready(ah)) + if (ath9k_hw_mci_is_enabled(ah)) ar9003_mci_2g5g_switch(ah, true); if (AR_SREV_9271(ah)) @@ -1728,10 +1728,9 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, u64 tsf = 0; int i, r; bool start_mci_reset = false; - bool mci = !!(ah->caps.hw_caps & ATH9K_HW_CAP_MCI); bool save_fullsleep = ah->chip_fullsleep; - if (mci) { + if (ath9k_hw_mci_is_enabled(ah)) { start_mci_reset = ar9003_mci_start_reset(ah, chan); if (start_mci_reset) return 0; @@ -1760,7 +1759,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, return r; } - if (mci) + if (ath9k_hw_mci_is_enabled(ah)) ar9003_mci_stop_bt(ah, save_fullsleep); saveDefAntenna = REG_READ(ah, AR_DEF_ANTENNA); @@ -1818,7 +1817,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, if (r) return r; - if (mci) + if (ath9k_hw_mci_is_enabled(ah)) ar9003_mci_reset(ah, false, IS_CHAN_2GHZ(chan), save_fullsleep); /* @@ -1937,7 +1936,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, ath9k_hw_loadnf(ah, chan); ath9k_hw_start_nfcal(ah, true); - if (mci && ar9003_mci_end_reset(ah, chan, caldata)) + if (ath9k_hw_mci_is_enabled(ah) && ar9003_mci_end_reset(ah, chan, caldata)) return -EIO; ENABLE_REGWRITE_BUFFER(ah); @@ -1982,7 +1981,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, if (ath9k_hw_btcoex_is_enabled(ah)) ath9k_hw_btcoex_enable(ah); - if (mci) + if (ath9k_hw_mci_is_enabled(ah)) ar9003_mci_check_bt(ah); if (AR_SREV_9300_20_OR_LATER(ah)) { @@ -2166,7 +2165,7 @@ bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode) status = ath9k_hw_set_power_awake(ah, setChip); break; case ATH9K_PM_FULL_SLEEP: - if (ah->caps.hw_caps & ATH9K_HW_CAP_MCI) + if (ath9k_hw_mci_is_enabled(ah)) ar9003_mci_set_full_sleep(ah); ath9k_set_power_sleep(ah, setChip); diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index b620c557c2a6..3740aab864f4 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -1037,6 +1037,11 @@ static inline bool ath9k_hw_btcoex_is_enabled(struct ath_hw *ah) { return ah->btcoex_hw.enabled; } +static inline bool ath9k_hw_mci_is_enabled(struct ath_hw *ah) +{ + return ah->btcoex_hw.enabled && (ah->caps.hw_caps & ATH9K_HW_CAP_MCI); + +} void ath9k_hw_btcoex_enable(struct ath_hw *ah); static inline enum ath_btcoex_scheme ath9k_hw_get_btcoex_scheme(struct ath_hw *ah) @@ -1048,6 +1053,10 @@ static inline bool ath9k_hw_btcoex_is_enabled(struct ath_hw *ah) { return false; } +static inline bool ath9k_hw_mci_is_enabled(struct ath_hw *ah) +{ + return false; +} static inline void ath9k_hw_btcoex_enable(struct ath_hw *ah) { } -- 2.30.2