From 60f0187031c05e04cbadffb62f557d0ff3564490 Mon Sep 17 00:00:00 2001 From: Yaniv Gardi Date: Thu, 10 Mar 2016 17:37:11 +0200 Subject: [PATCH] scsi: ufs: disable vccq if it's not needed by UFS device Some UFS devices don't require VCCQ rail for device operations hence this change adds support to recognize such devices and remove vote for the unused VCCQ rail. Reviewed-by: Hannes Reinecke Signed-off-by: Subhash Jadavani Signed-off-by: Yaniv Gardi Signed-off-by: Martin K. Petersen --- drivers/scsi/ufs/ufs.h | 1 + drivers/scsi/ufs/ufshcd.c | 60 ++++++++++++++++++++++++++++++++++++--- 2 files changed, 57 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h index 8ec63566d71d..b291fa6ed2ad 100644 --- a/drivers/scsi/ufs/ufs.h +++ b/drivers/scsi/ufs/ufs.h @@ -501,6 +501,7 @@ struct ufs_vreg { struct regulator *reg; const char *name; bool enabled; + bool unused; int min_uV; int max_uV; int min_uA; diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index f8b458fb258a..8ed7d4bab7be 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -195,6 +195,7 @@ static int ufshcd_probe_hba(struct ufs_hba *hba); static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on, bool skip_ref_clk); static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on); +static int ufshcd_set_vccq_rail_unused(struct ufs_hba *hba, bool unused); static int ufshcd_uic_hibern8_exit(struct ufs_hba *hba); static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba); static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba); @@ -4662,6 +4663,12 @@ static int ufshcd_probe_hba(struct ufs_hba *hba) goto out; ufs_advertise_fixup_device(hba); + + ret = ufshcd_set_vccq_rail_unused(hba, + (hba->dev_quirks & UFS_DEVICE_NO_VCCQ) ? true : false); + if (ret) + goto out; + /* UFS device is also active now */ ufshcd_set_ufs_dev_active(hba); ufshcd_force_reset_auto_bkops(hba); @@ -4812,13 +4819,24 @@ static int ufshcd_config_vreg_load(struct device *dev, struct ufs_vreg *vreg, static inline int ufshcd_config_vreg_lpm(struct ufs_hba *hba, struct ufs_vreg *vreg) { - return ufshcd_config_vreg_load(hba->dev, vreg, UFS_VREG_LPM_LOAD_UA); + if (!vreg) + return 0; + else if (vreg->unused) + return 0; + else + return ufshcd_config_vreg_load(hba->dev, vreg, + UFS_VREG_LPM_LOAD_UA); } static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba, struct ufs_vreg *vreg) { - return ufshcd_config_vreg_load(hba->dev, vreg, vreg->max_uA); + if (!vreg) + return 0; + else if (vreg->unused) + return 0; + else + return ufshcd_config_vreg_load(hba->dev, vreg, vreg->max_uA); } static int ufshcd_config_vreg(struct device *dev, @@ -4853,7 +4871,9 @@ static int ufshcd_enable_vreg(struct device *dev, struct ufs_vreg *vreg) { int ret = 0; - if (!vreg || vreg->enabled) + if (!vreg) + goto out; + else if (vreg->enabled || vreg->unused) goto out; ret = ufshcd_config_vreg(dev, vreg, true); @@ -4873,7 +4893,9 @@ static int ufshcd_disable_vreg(struct device *dev, struct ufs_vreg *vreg) { int ret = 0; - if (!vreg || !vreg->enabled) + if (!vreg) + goto out; + else if (!vreg->enabled || vreg->unused) goto out; ret = regulator_disable(vreg->reg); @@ -4979,6 +5001,36 @@ static int ufshcd_init_hba_vreg(struct ufs_hba *hba) return 0; } +static int ufshcd_set_vccq_rail_unused(struct ufs_hba *hba, bool unused) +{ + int ret = 0; + struct ufs_vreg_info *info = &hba->vreg_info; + + if (!info) + goto out; + else if (!info->vccq) + goto out; + + if (unused) { + /* shut off the rail here */ + ret = ufshcd_toggle_vreg(hba->dev, info->vccq, false); + /* + * Mark this rail as no longer used, so it doesn't get enabled + * later by mistake + */ + if (!ret) + info->vccq->unused = true; + } else { + /* + * rail should have been already enabled hence just make sure + * that unused flag is cleared. + */ + info->vccq->unused = false; + } +out: + return ret; +} + static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on, bool skip_ref_clk) { -- 2.30.2