From 614ee07acfbb55f2debfc3223ffae97fee17ed14 Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Tue, 3 Oct 2017 15:08:59 -0700 Subject: [PATCH] drm/i915/cnl: Fix PLL initialization for HDMI. HDMI Mode selection on CNL is on CFGCR0 for that PLL, not on in a global CTRL1 as it was on SKL. The original patch addressed this difference, but leaving behind this single entry here. So we were checking the wrong bits during the PLL initialization and consequently avoiding the CFGCR1 setup during HDMI initialization. Luckly when only HDMI was in use BIOS had already setup this for us. But the dual display with hot plug were messed up. Fixes: a927c927de34 ("drm/i915/cnl: Initialize PLLs") Cc: Paulo Zanoni Cc: Manasi Navare Cc: Kahola, Mika Signed-off-by: Rodrigo Vivi Reviewed-by: James Ausmus Reviewed-by: Manasi Navare Link: https://patchwork.freedesktop.org/patch/msgid/20171003220859.21352-3-rodrigo.vivi@intel.com --- drivers/gpu/drm/i915/intel_dpll_mgr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c b/drivers/gpu/drm/i915/intel_dpll_mgr.c index a2a3d93d67bd..df808a94c511 100644 --- a/drivers/gpu/drm/i915/intel_dpll_mgr.c +++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c @@ -1996,7 +1996,7 @@ static void cnl_ddi_pll_enable(struct drm_i915_private *dev_priv, /* 3. Configure DPLL_CFGCR0 */ /* Avoid touch CFGCR1 if HDMI mode is not enabled */ - if (pll->state.hw_state.cfgcr0 & DPLL_CTRL1_HDMI_MODE(pll->id)) { + if (pll->state.hw_state.cfgcr0 & DPLL_CFGCR0_HDMI_MODE) { val = pll->state.hw_state.cfgcr1; I915_WRITE(CNL_DPLL_CFGCR1(pll->id), val); /* 4. Reab back to ensure writes completed */ -- 2.30.2