From 616badd2fb499320d3ac3b54462f55dededd0e0f Mon Sep 17 00:00:00 2001 From: Alistair Popple Date: Tue, 10 Jan 2017 15:41:44 +1100 Subject: [PATCH] powerpc/powernv: Use OPAL call for TCE kill on NVLink2 Add detection of NPU2 PHBs. NPU2/NVLink2 has a different register layout for the TCE kill register therefore TCE invalidation should be done via the OPAL call rather than using the register directly as it is for PHB3 and NVLink1. This changes TCE invalidation to use the OPAL call in the case of a NPU2 PHB model. Signed-off-by: Alistair Popple Signed-off-by: Michael Ellerman --- arch/powerpc/platforms/powernv/pci-ioda.c | 9 ++++++++- arch/powerpc/platforms/powernv/pci.c | 7 +++++++ arch/powerpc/platforms/powernv/pci.h | 1 + 3 files changed, 16 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 939de0c2e00f..ddfa069c5e7e 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -1953,7 +1953,12 @@ static void pnv_pci_ioda2_tce_invalidate(struct iommu_table *tbl, struct pnv_phb *phb = pe->phb; unsigned int shift = tbl->it_page_shift; - if (phb->type == PNV_PHB_NPU) { + /* + * NVLink1 can use the TCE kill register directly as + * it's the same as PHB3. NVLink2 is different and + * should go via the OPAL call. + */ + if (phb->model == PNV_PHB_MODEL_NPU) { /* * The NVLink hardware does not support TCE kill * per TCE entry so we have to invalidate @@ -3674,6 +3679,8 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, phb->model = PNV_PHB_MODEL_PHB3; else if (of_device_is_compatible(np, "ibm,power8-npu-pciex")) phb->model = PNV_PHB_MODEL_NPU; + else if (of_device_is_compatible(np, "ibm,power9-npu-pciex")) + phb->model = PNV_PHB_MODEL_NPU2; else phb->model = PNV_PHB_MODEL_UNKNOWN; diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index c6d554fe585c..eb835e977e33 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -940,6 +940,13 @@ void __init pnv_pci_init(void) for_each_compatible_node(np, NULL, "ibm,ioda2-npu-phb") pnv_pci_init_npu_phb(np); + /* + * Look for NPU2 PHBs which we treat mostly as NPU PHBs with + * the exception of TCE kill which requires an OPAL call. + */ + for_each_compatible_node(np, NULL, "ibm,ioda2-npu2-phb") + pnv_pci_init_npu_phb(np); + /* Configure IOMMU DMA hooks */ set_pci_dma_ops(&dma_iommu_ops); } diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h index e64df7894d6e..e1d3e5526b54 100644 --- a/arch/powerpc/platforms/powernv/pci.h +++ b/arch/powerpc/platforms/powernv/pci.h @@ -19,6 +19,7 @@ enum pnv_phb_model { PNV_PHB_MODEL_P7IOC, PNV_PHB_MODEL_PHB3, PNV_PHB_MODEL_NPU, + PNV_PHB_MODEL_NPU2, }; #define PNV_PCI_DIAG_BUF_SIZE 8192 -- 2.30.2