From 6419fdbb6f90e147690f8833cba59d289d613da5 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Wed, 11 Nov 2015 17:31:26 +0530 Subject: [PATCH] ath10k: poll HTT send completion when CE 5 is unused commit a70587b3389a ("ath10k: configure copy engine 5 for HTT messages") moved send completion polling under HTT Rx (CE 5) service routine. For QCA6174 based devices copy engine 1 (CE 1) is used for HTT Rx instead of CE 5. So send completion never be called. This is causing "failed to transmit packet, dropping: -105" errors. Fix this by processing send completion from CE 1 service routine instead of CE 5. Fixes: a70587b3389a ("ath10k: configure copy engine 5 for HTT messages") Tested-by: Ryan Hsu Signed-off-by: Rajkumar Manoharan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/pci.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 0ad3dd139bf5..930785a724e1 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -107,6 +107,7 @@ static void ath10k_pci_htc_tx_cb(struct ath10k_ce_pipe *ce_state); static void ath10k_pci_htc_rx_cb(struct ath10k_ce_pipe *ce_state); static void ath10k_pci_htt_tx_cb(struct ath10k_ce_pipe *ce_state); static void ath10k_pci_htt_rx_cb(struct ath10k_ce_pipe *ce_state); +static void ath10k_pci_htt_htc_rx_cb(struct ath10k_ce_pipe *ce_state); static struct ce_attr host_ce_config_wlan[] = { /* CE0: host->target HTC control and raw streams */ @@ -124,7 +125,7 @@ static struct ce_attr host_ce_config_wlan[] = { .src_nentries = 0, .src_sz_max = 2048, .dest_nentries = 512, - .recv_cb = ath10k_pci_htc_rx_cb, + .recv_cb = ath10k_pci_htt_htc_rx_cb, }, /* CE2: target->host WMI */ @@ -1204,6 +1205,16 @@ static void ath10k_pci_htc_rx_cb(struct ath10k_ce_pipe *ce_state) ath10k_pci_process_rx_cb(ce_state, ath10k_htc_rx_completion_handler); } +static void ath10k_pci_htt_htc_rx_cb(struct ath10k_ce_pipe *ce_state) +{ + /* CE4 polling needs to be done whenever CE pipe which transports + * HTT Rx (target->host) is processed. + */ + ath10k_ce_per_engine_service(ce_state->ar, 4); + + ath10k_pci_process_rx_cb(ce_state, ath10k_htc_rx_completion_handler); +} + /* Called by lower (CE) layer when a send to HTT Target completes. */ static void ath10k_pci_htt_tx_cb(struct ath10k_ce_pipe *ce_state) { -- 2.30.2