From 6f398aa76248dfdbd1ea31b8ef32431be0f762ee Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Thu, 31 May 2018 17:28:38 +0200 Subject: [PATCH] oxnas: reboot target Reboot the oxnas target based on Linux 4.14 by rebasing our support on top of the now-existing upstream kernel support. This commit brings oxnas support to the level of v4.17 having upstream drivers for Ethernet, Serial and NAND flash. Botch up OpenWrt's local drivers for EHCI, SATA and PCIe based on the new platform code and device-tree. Re-introduce base-files from old oxnas target which works for now but needs further clean-up towards generic board support. Functional issues: * PCIe won't come up (hence no USB3 on Shuttle KD20) * I2C bus of Akitio myCloud device is likely not to work (missing debounce support in new pinctrl driver) Code-style issues: * plla/pllb needs further cleanup -- currently their users are writing into the syscon regmap after acquireling the clk instead of using defined clk_*_*() functions to setup multipliers and dividors. * PCIe phy needs its own little driver. * SATA driver is a monster and should be split into an mfd having a raidctrl regmap, sata controller, sata ports and sata phy. Tested on MitraStar STG-212 aka. Medion Akoya MD86xxx and Shuttle KD20. Signed-off-by: Daniel Golle (squash-picked commit 17511a7ea8 and commit dcc34574ef from master) --- .../uboot-oxnas/src/include/configs/ox820.h | 1 + target/linux/oxnas/Makefile | 20 +- .../linux/oxnas/{config-4.4 => config-4.14} | 341 +- ...20-akitio.dts => ox820-akitio-mycloud.dts} | 126 +- .../dts/ox820-cloudengines-pogoplug-pro.dts | 98 + ...-stg212.dts => ox820-mitrastar-stg212.dts} | 70 +- .../arch/arm/boot/dts/ox820-pogoplug-pro.dts | 94 - .../arch/arm/boot/dts/ox820-pogoplug-v3.dts | 91 - ...{ox820-kd20.dts => ox820-shuttle-kd20.dts} | 102 +- .../oxnas/files/arch/arm/boot/dts/ox820.dtsi | 342 -- .../files/arch/arm/configs/ox820_defconfig | 104 - .../debug/uncompress-ox820.h} | 0 .../oxnas/files/arch/arm/mach-oxnas/Kconfig | 25 - .../oxnas/files/arch/arm/mach-oxnas/Makefile | 8 - .../files/arch/arm/mach-oxnas/Makefile.boot | 2 - .../oxnas/files/arch/arm/mach-oxnas/fiq.S | 87 - .../oxnas/files/arch/arm/mach-oxnas/headsmp.S | 27 - .../oxnas/files/arch/arm/mach-oxnas/hotplug.c | 111 - .../arm/mach-oxnas/include/mach/hardware.h | 233 - .../arch/arm/mach-oxnas/include/mach/iomap.h | 33 - .../arch/arm/mach-oxnas/include/mach/irqs.h | 7 - .../arch/arm/mach-oxnas/include/mach/smp.h | 34 - .../arch/arm/mach-oxnas/include/mach/timex.h | 6 - .../arch/arm/mach-oxnas/include/mach/utils.h | 34 - .../files/arch/arm/mach-oxnas/mach-ox820.c | 183 - .../oxnas/files/arch/arm/mach-oxnas/platsmp.c | 315 - .../oxnas/files/drivers/ata/sata_oxnas.c | 38 +- .../linux/oxnas/files/drivers/clk/clk-oxnas.c | 297 - .../drivers/clocksource/oxnas_rps_timer.c | 96 - .../oxnas/files/drivers/irqchip/irq-rps.c | 145 - .../oxnas/files/drivers/mtd/nand/oxnas_nand.c | 206 - .../net/ethernet/stmicro/stmmac/dwmac-oxnas.c | 145 - .../oxnas/files/drivers/pci/host/pcie-oxnas.c | 276 +- .../files/drivers/pinctrl/pinctrl-oxnas.c | 1461 ----- .../oxnas/files/drivers/reset/reset-ox820.c | 107 - .../oxnas/files/drivers/usb/host/ehci-oxnas.c | 106 +- target/linux/oxnas/image/Makefile | 108 +- target/linux/oxnas/image/ox810se.mk | 18 + target/linux/oxnas/image/ox820.mk | 81 + target/linux/oxnas/modules.mk | 16 +- target/linux/oxnas/ox810se/config-default | 39 + .../oxnas/ox810se/profiles/00-default.mk | 10 + target/linux/oxnas/ox810se/target.mk | 9 + target/linux/oxnas/ox820/config-default | 106 + .../oxnas/{ => ox820}/profiles/00-default.mk | 0 target/linux/oxnas/ox820/target.mk | 12 + .../0001-ARM-dts-rename-oxnas-dts-files.patch | 48 + ...te-ARM-OXNAS-platform-support-patter.patch | 39 + ...3-ARM-configs-add-OXNAS-v6-defconfig.patch | 117 + .../050-ox820-remove-left-overs.patch | 70 + .../100-oxnas-clk-plla-pllb.patch | 273 + .../oxnas/patches-4.14/340-oxnas-pcie.patch | 108 + .../oxnas/patches-4.14/500-oxnas-sata.patch | 49 + .../patches-4.14/510-ox820-libata-leds.patch | 10 + .../oxnas/patches-4.14/800-oxnas-ehci.patch | 51 + ...angle-bootloader-s-kernel-arguments.patch} | 30 +- .../999-libata-hacks.patch | 10 +- ...ackport-v4.7-0day-patches-from-Boris.patch | 5281 ----------------- ...helper-reading-NAND-ECC-algo-from-DT.patch | 91 - ...mtd-nand-import-nand_hw_control_init.patch | 175 - ...-arm_introduce-dma-fiq-irq-broadcast.patch | 80 - .../250-add-plxtech-vendor-prefix.patch | 10 - .../300-introduce-oxnas-platform.patch | 71 - .../patches-4.4/310-oxnas-clocksource.patch | 25 - .../oxnas/patches-4.4/320-oxnas-irqchip.patch | 34 - .../oxnas/patches-4.4/330-oxnas-pinctrl.patch | 28 - .../oxnas/patches-4.4/340-oxnas-pcie.patch | 22 - .../oxnas/patches-4.4/350-oxnas-reset.patch | 20 - .../oxnas/patches-4.4/400-oxnas-nand.patch | 24 - .../oxnas/patches-4.4/500-oxnas-sata.patch | 26 - .../oxnas/patches-4.4/700-oxnas-dwmac.patch | 29 - .../oxnas/patches-4.4/800-oxnas-ehci.patch | 26 - .../oxnas/patches-4.4/900-more-boards.patch | 15 - 73 files changed, 1899 insertions(+), 10633 deletions(-) rename target/linux/oxnas/{config-4.4 => config-4.14} (51%) rename target/linux/oxnas/files/arch/arm/boot/dts/{ox820-akitio.dts => ox820-akitio-mycloud.dts} (50%) create mode 100644 target/linux/oxnas/files/arch/arm/boot/dts/ox820-cloudengines-pogoplug-pro.dts rename target/linux/oxnas/files/arch/arm/boot/dts/{ox820-stg212.dts => ox820-mitrastar-stg212.dts} (58%) delete mode 100644 target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-pro.dts delete mode 100644 target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-v3.dts rename target/linux/oxnas/files/arch/arm/boot/dts/{ox820-kd20.dts => ox820-shuttle-kd20.dts} (65%) delete mode 100644 target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi delete mode 100644 target/linux/oxnas/files/arch/arm/configs/ox820_defconfig rename target/linux/oxnas/files/arch/arm/{mach-oxnas/include/mach/uncompress.h => include/debug/uncompress-ox820.h} (100%) delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/Kconfig delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile.boot delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/fiq.S delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/headsmp.S delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/hotplug.c delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/hardware.h delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/iomap.h delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/irqs.h delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/smp.h delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/timex.h delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/utils.h delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/mach-ox820.c delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/platsmp.c delete mode 100644 target/linux/oxnas/files/drivers/clk/clk-oxnas.c delete mode 100644 target/linux/oxnas/files/drivers/clocksource/oxnas_rps_timer.c delete mode 100644 target/linux/oxnas/files/drivers/irqchip/irq-rps.c delete mode 100644 target/linux/oxnas/files/drivers/mtd/nand/oxnas_nand.c delete mode 100644 target/linux/oxnas/files/drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c delete mode 100644 target/linux/oxnas/files/drivers/pinctrl/pinctrl-oxnas.c delete mode 100644 target/linux/oxnas/files/drivers/reset/reset-ox820.c create mode 100644 target/linux/oxnas/image/ox810se.mk create mode 100644 target/linux/oxnas/image/ox820.mk create mode 100644 target/linux/oxnas/ox810se/config-default create mode 100644 target/linux/oxnas/ox810se/profiles/00-default.mk create mode 100644 target/linux/oxnas/ox810se/target.mk create mode 100644 target/linux/oxnas/ox820/config-default rename target/linux/oxnas/{ => ox820}/profiles/00-default.mk (100%) create mode 100644 target/linux/oxnas/ox820/target.mk create mode 100644 target/linux/oxnas/patches-4.14/0001-ARM-dts-rename-oxnas-dts-files.patch create mode 100644 target/linux/oxnas/patches-4.14/0002-MAINTAINERS-update-ARM-OXNAS-platform-support-patter.patch create mode 100644 target/linux/oxnas/patches-4.14/0003-ARM-configs-add-OXNAS-v6-defconfig.patch create mode 100644 target/linux/oxnas/patches-4.14/050-ox820-remove-left-overs.patch create mode 100644 target/linux/oxnas/patches-4.14/100-oxnas-clk-plla-pllb.patch create mode 100644 target/linux/oxnas/patches-4.14/340-oxnas-pcie.patch create mode 100644 target/linux/oxnas/patches-4.14/500-oxnas-sata.patch create mode 100644 target/linux/oxnas/patches-4.14/510-ox820-libata-leds.patch create mode 100644 target/linux/oxnas/patches-4.14/800-oxnas-ehci.patch rename target/linux/oxnas/{patches-4.4/996-ATAG_DTB_COMPAT_CMDLINE_MANGLE.patch => patches-4.14/996-generic-Mangle-bootloader-s-kernel-arguments.patch} (84%) rename target/linux/oxnas/{patches-4.4 => patches-4.14}/999-libata-hacks.patch (82%) delete mode 100644 target/linux/oxnas/patches-4.4/0072-mtd-backport-v4.7-0day-patches-from-Boris.patch delete mode 100644 target/linux/oxnas/patches-4.4/0073-of-mtd-prepare-helper-reading-NAND-ECC-algo-from-DT.patch delete mode 100644 target/linux/oxnas/patches-4.4/0074-mtd-nand-import-nand_hw_control_init.patch delete mode 100644 target/linux/oxnas/patches-4.4/010-arm_introduce-dma-fiq-irq-broadcast.patch delete mode 100644 target/linux/oxnas/patches-4.4/250-add-plxtech-vendor-prefix.patch delete mode 100644 target/linux/oxnas/patches-4.4/300-introduce-oxnas-platform.patch delete mode 100644 target/linux/oxnas/patches-4.4/310-oxnas-clocksource.patch delete mode 100644 target/linux/oxnas/patches-4.4/320-oxnas-irqchip.patch delete mode 100644 target/linux/oxnas/patches-4.4/330-oxnas-pinctrl.patch delete mode 100644 target/linux/oxnas/patches-4.4/340-oxnas-pcie.patch delete mode 100644 target/linux/oxnas/patches-4.4/350-oxnas-reset.patch delete mode 100644 target/linux/oxnas/patches-4.4/400-oxnas-nand.patch delete mode 100644 target/linux/oxnas/patches-4.4/500-oxnas-sata.patch delete mode 100644 target/linux/oxnas/patches-4.4/700-oxnas-dwmac.patch delete mode 100644 target/linux/oxnas/patches-4.4/800-oxnas-ehci.patch delete mode 100644 target/linux/oxnas/patches-4.4/900-more-boards.patch diff --git a/package/boot/uboot-oxnas/src/include/configs/ox820.h b/package/boot/uboot-oxnas/src/include/configs/ox820.h index 85ee3b4cd5..65618ae6c5 100644 --- a/package/boot/uboot-oxnas/src/include/configs/ox820.h +++ b/package/boot/uboot-oxnas/src/include/configs/ox820.h @@ -350,6 +350,7 @@ #define CONFIG_CMD_GETTIME #define CONFIG_CMD_BOOTMENU #define CONFIG_CMD_ELF +#define CONFIG_CMD_BOOZ #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION diff --git a/target/linux/oxnas/Makefile b/target/linux/oxnas/Makefile index 0d9d356734..52d57f336a 100644 --- a/target/linux/oxnas/Makefile +++ b/target/linux/oxnas/Makefile @@ -1,29 +1,21 @@ -# -# Copyright (C) 2013 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# include $(TOPDIR)/rules.mk ARCH:=arm BOARD:=oxnas -BOARDNAME:=PLXTECH/Oxford NAS782x/OX82x +BOARDNAME:=PLXTECH/Oxford NAS782x/OX8xx +SUBTARGETS:=ox810se ox820 +FEATURES:=gpio ramdisk rtc squashfs DEVICE_TYPE:=nas -FEATURES:=gpio nand pcie usb ramdisk rtc squashfs ubifs -CPU_TYPE:=mpcore MAINTAINER:=Daniel Golle -KERNEL_PATCHVER:=4.4 +KERNEL_PATCHVER:=4.14 include $(INCLUDE_DIR)/target.mk DEFAULT_PACKAGES += \ - kmod-ata-core kmod-ata-oxnas-sata kmod-button-hotplug \ - kmod-input-gpio-keys-polled kmod-usb-ledtrig-usbport \ - kmod-ledtrig-timer kmod-leds-gpio kmod-usb2-oxnas \ - kmod-usb-storage uboot-envtools uboot-oxnas-ox820 + kmod-button-hotplug kmod-input-gpio-keys-polled \ + kmod-ledtrig-timer kmod-leds-gpio uboot-envtools KERNELNAME:=zImage dtbs diff --git a/target/linux/oxnas/config-4.4 b/target/linux/oxnas/config-4.14 similarity index 51% rename from target/linux/oxnas/config-4.4 rename to target/linux/oxnas/config-4.14 index 0c6e992510..4d6943aea5 100644 --- a/target/linux/oxnas/config-4.4 +++ b/target/linux/oxnas/config-4.14 @@ -1,17 +1,21 @@ CONFIG_ALIGNMENT_TRAP=y -# CONFIG_APM_EMULATION is not set -CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y CONFIG_ARCH_HAS_ELF_RANDOMIZE=y CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y CONFIG_ARCH_HAS_RESET_CONTROLLER=y +CONFIG_ARCH_HAS_SET_MEMORY=y CONFIG_ARCH_HAS_SG_CHAIN=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y +CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MULTIPLATFORM=y CONFIG_ARCH_NR_GPIO=0 +CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y +# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set CONFIG_ARCH_OXNAS=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y @@ -21,7 +25,6 @@ CONFIG_ARCH_USE_BUILTIN_BSWAP=y CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y CONFIG_ARCH_WANT_GENERAL_HUGETLB=y CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ARCH_WANT_LIBATA_LEDS=y CONFIG_ARM=y CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y @@ -29,111 +32,116 @@ CONFIG_ARM_ATAG_DTB_COMPAT=y # CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y CONFIG_ARM_CPUIDLE=y -# CONFIG_ARM_CPU_SUSPEND is not set -CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8 -CONFIG_ARM_DMA_USE_IOMMU=y -CONFIG_ARM_GIC=y +CONFIG_ARM_CPU_SUSPEND=y CONFIG_ARM_HAS_SG_CHAIN=y CONFIG_ARM_L1_CACHE_SHIFT=5 CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_SMMU=y +CONFIG_ARM_PMU=y +# CONFIG_ARM_SMMU is not set CONFIG_ARM_THUMB=y +CONFIG_ARM_TIMER_SP804=y CONFIG_ARM_UNWIND=y CONFIG_ATAGS=y -CONFIG_ATA_LEDS=y CONFIG_AUTO_ZRELADDR=y +CONFIG_BINARY_PRINTF=y +CONFIG_BLK_CMDLINE_PARSER=y +CONFIG_BLK_DEBUG_FS=y CONFIG_BLK_DEV_BSG=y -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_BLK_DEV_SD=y -CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y -CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1 -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1 -# CONFIG_CACHE_L2X0 is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_MQ_PCI=y +CONFIG_BLK_SCSI_REQUEST=y +# CONFIG_BPF_SYSCALL is not set CONFIG_CLKDEV_LOOKUP=y CONFIG_CLKSRC_MMIO=y -CONFIG_CLKSRC_OF=y -CONFIG_CLKSRC_PROBE=y -CONFIG_CLKSRC_RPS_TIMER=y CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE="console=ttyS0,115200n8 earlyprintk=serial" -CONFIG_CMDLINE_FROM_BOOTLOADER=y +CONFIG_CMA=y +CONFIG_CMA_ALIGNMENT=8 +CONFIG_CMA_AREAS=7 +# CONFIG_CMA_DEBUG is not set +# CONFIG_CMA_DEBUGFS is not set +CONFIG_CMA_SIZE_MBYTES=64 +# CONFIG_CMA_SIZE_SEL_MAX is not set +CONFIG_CMA_SIZE_SEL_MBYTES=y +# CONFIG_CMA_SIZE_SEL_MIN is not set +# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set +CONFIG_CMDLINE_PARTITION=y CONFIG_COMMON_CLK=y +CONFIG_COMMON_CLK_OXNAS=y CONFIG_COMPACTION=y -CONFIG_CONSOLE_POLL=y +CONFIG_COMPAT_BRK=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_COREDUMP=y -CONFIG_CPU_32v6=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_ABRT_EV6=y -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_CPU_CACHE_V6=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_HAS_ASID=y -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_IDLE_GOV_MENU=y -CONFIG_CPU_PABRT_V6=y -CONFIG_CPU_PM=y -CONFIG_CPU_RMAP=y -# CONFIG_CPU_SW_DOMAIN_PAN is not set -CONFIG_CPU_TLB_V6=y -CONFIG_CPU_V6K=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +CONFIG_CRASH_CORE=y CONFIG_CRC16=y # CONFIG_CRC32_SARWATE is not set CONFIG_CRC32_SLICEBY8=y +CONFIG_CROSS_MEMORY_ATTACH=y +CONFIG_CRYPTO_ACOMP2=y +# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_HW=y CONFIG_CRYPTO_LZO=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_ICEDCC=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_LL_INCLUDE="debug/icedcc.S" -# CONFIG_DEBUG_UART_8250 is not set +CONFIG_DEBUG_ALIGN_RODATA=y +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_USER is not set -CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=16 -CONFIG_DEPRECATED_PARAM_STRUCT=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_DMADEVICES=y -CONFIG_DMA_CACHE_FIQ_BROADCAST=y -# CONFIG_DMA_CACHE_RWFO is not set -CONFIG_DMA_ENGINE=y -CONFIG_DMA_OF=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_LZ4=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_DECOMPRESS_XZ=y +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_DEVMEM=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_DMA_CMA=y CONFIG_DNOTIFY=y CONFIG_DTC=y CONFIG_DT_IDLE_STATES=y +CONFIG_DUMMY_CONSOLE=y +# CONFIG_DWMAC_DWC_QOS_ETH is not set CONFIG_DWMAC_GENERIC=y CONFIG_DWMAC_OXNAS=y -# CONFIG_DWMAC_SUNXI is not set -# CONFIG_DW_DMAC_PCI is not set CONFIG_EARLY_PRINTK=y -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_FIQ=y +# CONFIG_EDAC_SUPPORT is not set +CONFIG_ELF_CORE=y +CONFIG_FIXED_PHY=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_GENERIC_ALLOCATOR=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_EARLY_IOREMAP=y CONFIG_GENERIC_IDLE_POLL_SETUP=y CONFIG_GENERIC_IO=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_MSI_IRQ=y +CONFIG_GENERIC_MSI_IRQ_DOMAIN=y CONFIG_GENERIC_PCI_IOMAP=y CONFIG_GENERIC_PINCONF=y CONFIG_GENERIC_SCHED_CLOCK=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GLOB=y CONFIG_GPIOLIB=y -CONFIG_GPIO_DEVRES=y +CONFIG_GPIOLIB_IRQCHIP=y CONFIG_GPIO_GENERIC=y CONFIG_GPIO_GENERIC_PLATFORM=y -CONFIG_GPIO_SYSFS=y +CONFIG_GRO_CELLS=y CONFIG_HANDLE_DOMAIN_IRQ=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_HAS_DMA=y @@ -147,10 +155,7 @@ CONFIG_HAVE_ARCH_KGDB=y CONFIG_HAVE_ARCH_PFN_VALID=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_ARM_SCU=y -CONFIG_HAVE_ARM_TWD=y # CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_BPF_JIT=y CONFIG_HAVE_CC_STACKPROTECTOR=y CONFIG_HAVE_CLK=y CONFIG_HAVE_CLK_PREPARE=y @@ -158,10 +163,10 @@ CONFIG_HAVE_CONTEXT_TRACKING=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_HAVE_DEBUG_KMEMLEAK=y CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y +CONFIG_HAVE_EBPF_JIT=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y @@ -178,189 +183,177 @@ CONFIG_HAVE_PERF_REGS=y CONFIG_HAVE_PERF_USER_STACK_DUMP=y CONFIG_HAVE_PROC_CPU=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_SMP=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_UID16=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HOTPLUG_CPU=y +CONFIG_HID=y +CONFIG_HID_GENERIC=y +CONFIG_HWMON=y +CONFIG_HW_CONSOLE=y CONFIG_HZ_FIXED=0 -CONFIG_I2C=y -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_BOARDINFO=y CONFIG_ICPLUS_PHY=y +CONFIG_INET_DIAG=y +# CONFIG_INET_DIAG_DESTROY is not set +# CONFIG_INET_RAW_DIAG is not set +CONFIG_INET_TCP_DIAG=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INITRAMFS_SOURCE="" CONFIG_INPUT=y -# CONFIG_INPUT_MISC is not set -CONFIG_IOMMU_API=y CONFIG_IOMMU_HELPER=y -CONFIG_IOMMU_IO_PGTABLE=y -CONFIG_IOMMU_IO_PGTABLE_LPAE=y -# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set +# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set +# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set CONFIG_IOMMU_SUPPORT=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_MULTICAST is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_BOOTP is not set -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_RARP is not set +CONFIG_IOSCHED_CFQ=y CONFIG_IRQCHIP=y CONFIG_IRQ_DOMAIN=y CONFIG_IRQ_DOMAIN_HIERARCHY=y CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_TIME_ACCOUNTING=y CONFIG_IRQ_WORK=y # CONFIG_ISDN is not set +CONFIG_JBD2=y # CONFIG_JFFS2_FS is not set -CONFIG_JUMP_LABEL=y CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KGDB=y -# CONFIG_KGDB_KDB is not set -CONFIG_KGDB_SERIAL_CONSOLE=y -# CONFIG_KGDB_TESTS is not set -# CONFIG_LDM_DEBUG is not set -CONFIG_LDM_PARTITION=y -# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_XZ is not set +CONFIG_KEXEC=y +CONFIG_KEXEC_CORE=y +# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_NETDEV is not set -# CONFIG_LEDS_TRIGGER_TIMER is not set +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 CONFIG_LIBFDT=y -CONFIG_LOCKUP_DETECTOR=y -CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_LOCALVERSION_AUTO=y +CONFIG_LZ4_DECOMPRESS=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y -CONFIG_MACH_OX820=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_MAILBOX=y -# CONFIG_MAILBOX_TEST is not set -CONFIG_MDIO_BOARDINFO=y +CONFIG_MDIO_BUS=y +CONFIG_MDIO_DEVICE=y +CONFIG_MEMORY_ISOLATION=y CONFIG_MFD_SYSCON=y -CONFIG_MIGHT_HAVE_PCI=y CONFIG_MIGRATION=y +CONFIG_MODULES_TREE_LOOKUP=y CONFIG_MODULES_USE_ELF_REL=y -# CONFIG_MODULE_STRIPPED is not set -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_OXNAS=y -# CONFIG_MTD_SPLIT_FIRMWARE is not set -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -# CONFIG_MTD_UBI_FASTMAP is not set -# CONFIG_MTD_UBI_GLUEBI is not set -CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MULTI_IRQ_HANDLER=y -CONFIG_MUTEX_SPIN_ON_OWNER=y CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_NET_FLOW_LIMIT=y CONFIG_NET_PTP_CLASSIFY=y CONFIG_NLS=y +CONFIG_NOP_TRACER=y CONFIG_NO_BOOTMEM=y +CONFIG_NO_HZ=y CONFIG_NO_HZ_COMMON=y CONFIG_NO_HZ_IDLE=y -CONFIG_NR_CPUS=2 CONFIG_OF=y CONFIG_OF_ADDRESS=y CONFIG_OF_ADDRESS_PCI=y CONFIG_OF_EARLY_FLATTREE=y CONFIG_OF_FLATTREE=y CONFIG_OF_GPIO=y -CONFIG_OF_IOMMU=y CONFIG_OF_IRQ=y CONFIG_OF_MDIO=y -CONFIG_OF_MTD=y CONFIG_OF_NET=y CONFIG_OF_PCI=y CONFIG_OF_PCI_IRQ=y CONFIG_OF_RESERVED_MEM=y CONFIG_OLD_SIGACTION=y CONFIG_OLD_SIGSUSPEND3=y +CONFIG_OXNAS_RPS_TIMER=y CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PCI=y -CONFIG_PCIEAER=y -CONFIG_PCIEASPM=y -# CONFIG_PCIEASPM_DEBUG is not set -CONFIG_PCIEASPM_DEFAULT=y -# CONFIG_PCIEASPM_PERFORMANCE is not set -# CONFIG_PCIEASPM_POWERSAVE is not set -CONFIG_PCIEPORTBUS=y -CONFIG_PCIE_PME=y -# CONFIG_PCI_DOMAINS_GENERIC is not set -CONFIG_PCI_OXNAS=y +# CONFIG_PANIC_ON_OOPS is not set +CONFIG_PANIC_ON_OOPS_VALUE=0 +CONFIG_PANIC_TIMEOUT=0 +CONFIG_PERF_EVENTS=y CONFIG_PERF_USE_VMALLOC=y CONFIG_PGTABLE_LEVELS=2 CONFIG_PHYLIB=y CONFIG_PINCTRL=y CONFIG_PINCTRL_OXNAS=y -CONFIG_PLXTECH_RPS=y +# CONFIG_PINCTRL_SINGLE is not set CONFIG_PM=y CONFIG_PM_CLK=y # CONFIG_PM_DEBUG is not set -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_GPIO=y -CONFIG_POWER_RESET_SYSCON_POWEROFF=y -CONFIG_POWER_SUPPLY=y +CONFIG_PM_SLEEP=y CONFIG_PPS=y -CONFIG_PRINTK_TIME=y +CONFIG_PROBE_EVENTS=y CONFIG_PTP_1588_CLOCK=y -CONFIG_PWM=y -CONFIG_PWM_SYSFS=y CONFIG_RAS=y CONFIG_RATIONAL=y -CONFIG_RCU_CPU_STALL_TIMEOUT=21 -CONFIG_RCU_STALL_COMMON=y +CONFIG_RCU_TRACE=y +CONFIG_RD_BZIP2=y +CONFIG_RD_GZIP=y +CONFIG_RD_LZ4=y +CONFIG_RD_LZMA=y +CONFIG_RD_LZO=y +CONFIG_RD_XZ=y CONFIG_REALTEK_PHY=y CONFIG_REGMAP=y CONFIG_REGMAP_MMIO=y -CONFIG_RELAY=y CONFIG_RESET_CONTROLLER=y -CONFIG_RESET_CONTROLLER_OXNAS=y -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_DRV_CMOS is not set -CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_RESET_OXNAS=y +CONFIG_RING_BUFFER=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHED_INFO is not set -CONFIG_SCSI=y +# CONFIG_SCSI_DMA is not set +CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_8250_NR_UARTS=1 -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_RUNTIME_UARTS=1 -# CONFIG_SERIAL_KGDB_NMI is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y +CONFIG_SERIO=y +CONFIG_SERIO_LIBPS2=y +CONFIG_SERIO_SERPORT=y +CONFIG_SIMPLE_PM_BUS=y +CONFIG_SLUB_DEBUG=y +CONFIG_SOCK_DIAG=y +CONFIG_SPARSE_IRQ=y CONFIG_SRCU=y +CONFIG_STACKTRACE=y +# CONFIG_STAGING is not set CONFIG_STMMAC_ETH=y CONFIG_STMMAC_PLATFORM=y # CONFIG_STRIP_ASM_SYMS is not set +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y CONFIG_SWIOTLB=y +CONFIG_SWPHY=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_TREE_RCU=y -CONFIG_UBIFS_FS=y -# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h" -CONFIG_USB=y -CONFIG_USB_COMMON=y -# CONFIG_USB_EHCI_HCD is not set +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TIMER_OF=y +CONFIG_TIMER_PROBE=y +CONFIG_UEVENT_HELPER_PATH="" +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" +CONFIG_UPROBES=y +CONFIG_UPROBE_EVENTS=y CONFIG_USB_SUPPORT=y -# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USERIO is not set CONFIG_USE_OF=y CONFIG_VECTORS_BASE=0xffff0000 -# CONFIG_VFIO is not set +CONFIG_VERSATILE_FPGA_IRQ=y +CONFIG_VERSATILE_FPGA_IRQ_NR=4 +CONFIG_VFAT_FS=y # CONFIG_VFP is not set +# CONFIG_VLAN_8021Q is not set CONFIG_VM_EVENT_COUNTERS=y -CONFIG_WATCHDOG_CORE=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_XPS=y +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_VT_CONSOLE_SLEEP=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_WATCHDOG is not set +# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set CONFIG_XZ_DEC_ARM=y CONFIG_XZ_DEC_BCJ=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_X86=y CONFIG_ZBOOT_ROM_BSS=0 CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZLIB_DEFLATE=y CONFIG_ZLIB_INFLATE=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-akitio.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-akitio-mycloud.dts similarity index 50% rename from target/linux/oxnas/files/arch/arm/boot/dts/ox820-akitio.dts rename to target/linux/oxnas/files/arch/arm/boot/dts/ox820-akitio-mycloud.dts index 54aad1d86c..c0bf34c3f4 100644 --- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-akitio.dts +++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-akitio-mycloud.dts @@ -1,52 +1,33 @@ -/* - * Copyright (C) 2016 Daniel Golle - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - /dts-v1/; + #include "ox820.dtsi" #include / { - model = "Akitio MyCloud mini"; + model = "Akitio MyCloud"; - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk=serial"; - }; - - pcie-controller@47C00000 { - status = "disabled"; - }; - - uart@44200000 { - status = "okay"; - }; - - sata@45900000 { - status = "okay"; - nr-ports = <2>; - }; - - nand@41000000 { - status = "okay"; + compatible = "akitio,mycloud", "oxsemi,ox820"; + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; - ethernet@40400000 { - status = "okay"; + memory { + /* 128Mbytes DDR */ + reg = <0x60000000 0x8000000>; }; - ehci@40200100 { - status = "okay"; + aliases { + serial0 = &uart0; + gpio0 = &gpio0; + gpio1 = &gpio1; }; i2c-gpio { compatible = "i2c-gpio"; - gpios = <&GPIOB 9 0 &GPIOB 10 0>; + gpios = <&gpio1 9 0 &gpio1 10 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c>; i2c-gpio,delay-us = <10>; @@ -67,12 +48,12 @@ poll-interval = <100>; power { label = "power"; - gpios = <&GPIOA 11 1>; + gpios = <&gpio0 11 1>; linux,code = ; }; reset { label = "reset"; - gpios = <&GPIOB 6 1>; + gpios = <&gpio1 6 1>; linux,code = ; }; }; @@ -83,7 +64,7 @@ pinctrl-0 = <&pinctrl_leds>; status { label = "akitio:red:status"; - gpios = <&GPIOA 29 0>; + gpios = <&gpio0 29 0>; }; }; @@ -91,42 +72,51 @@ compatible = "gpio-poweroff"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_poweroff>; - gpios = <&GPIOB 13 2>; + gpios = <&gpio1 13 2>; }; +}; - pinctrl { +&pinctrl { + pinctrl_i2c: i2c-0 { i2c { - pinctrl_i2c: i2c-0 { - plxtech,pins = - <1 9 0 4 /* MF_B9 GPIO debounce */ - 1 10 0 4>; /* MF_B10 GPIO debounce */ - }; + pins = "gpio41", "gpio42"; /* MF_B9, MF_B10 */ + function = "gpio"; + /* ToDo: find a way to set debounce for those pins */ }; + }; + pinctrl_buttons: buttons-0 { buttons { - pinctrl_buttons: buttons-0 { - plxtech,pins = - <0 11 0 0 /* MF_A11 GPIO */ - 1 6 0 0>; /* MF_B6 GPIO */ - }; + pins = "gpio11", "gpio38"; /* MF_A11, MF_B6 GPIO */ + function = "gpio"; }; + }; + pinctrl_leds: leds-0 { leds { - pinctrl_leds: leds-0 { - plxtech,pins = - <0 29 0 0>; /* MF_A29 GPIO */ - }; + pins = "gpio29"; /* MF_A29 GPIO */ + function = "gpio"; }; + }; + pinctrl_poweroff: poweroff-0 { poweroff { - pinctrl_poweroff: poweroff-0 { - plxtech,pins = - <1 13 0 0>; /* MF_B13 GPIO */ - }; + pins = "gpio45"; /* MF_B13 GPIO */ + function = "gpio"; }; }; }; +&uart0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; +}; + &nandc { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + nand@0 { reg = <0>; #address-cells = <1>; @@ -136,12 +126,32 @@ partition@0 { label = "boot"; - reg = <0x00000000 0x026c0000>; + reg = <0x0 0x26c0000>; }; partition@26c0000 { label = "ubi"; - reg = <0x026c0000 0x0d940000>; + reg = <0x26c0000 0xd940000>; }; }; }; + +ða { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_etha_mdio>; +}; + +&ehci { + status = "okay"; +}; + +&sata { + status = "okay"; + nr-ports = <2>; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-cloudengines-pogoplug-pro.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-cloudengines-pogoplug-pro.dts new file mode 100644 index 0000000000..363fd30d20 --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-cloudengines-pogoplug-pro.dts @@ -0,0 +1,98 @@ +/* + * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3 + * + * Copyright (C) 2016 Neil Armstrong + * + * Licensed under GPLv2 or later + */ + +/dts-v1/; +#include "ox820.dtsi" + +/ { + model = "Cloud Engines PogoPlug Pro"; + + compatible = "cloudengines,pogoplugpro", "oxsemi,ox820"; + + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; + }; + + memory { + /* 128Mbytes DDR */ + reg = <0x60000000 0x8000000>; + }; + + aliases { + serial0 = &uart0; + gpio0 = &gpio0; + gpio1 = &gpio1; + }; + + leds { + compatible = "gpio-leds"; + + blue { + label = "pogoplug:blue"; + gpios = <&gpio0 2 0>; + default-state = "keep"; + }; + + orange { + label = "pogoplug:orange"; + gpios = <&gpio1 16 1>; + default-state = "keep"; + }; + + green { + label = "pogoplug:green"; + gpios = <&gpio1 17 1>; + default-state = "keep"; + }; + }; +}; + +&uart0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; +}; + +&nandc { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-ecc-mode = "soft"; + nand-ecc-algo = "hamming"; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x00e00000>; + read-only; + }; + + partition@e00000 { + label = "ubi"; + reg = <0x00e00000 0x07200000>; + }; + }; +}; + +ða { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_etha_mdio>; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-stg212.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-mitrastar-stg212.dts similarity index 58% rename from target/linux/oxnas/files/arch/arm/boot/dts/ox820-stg212.dts rename to target/linux/oxnas/files/arch/arm/boot/dts/ox820-mitrastar-stg212.dts index ad93d4ec15..834ea77653 100644 --- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-stg212.dts +++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-mitrastar-stg212.dts @@ -1,11 +1,3 @@ -/* - * Copyright (C) 2013 OpenWrt.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - /dts-v1/; #include "ox820.dtsi" @@ -15,25 +7,22 @@ / { model = "MitraStar Technology Corp. STG-212"; - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk=serial mem=128M"; - }; + compatible = "mitrastar,stg-212", "oxsemi,ox820"; - uart@44200000 { - status = "okay"; + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; - sata@45900000 { - status = "okay"; + memory { + /* 128Mbytes DDR */ + reg = <0x60000000 0x8000000>; }; - - ethernet@40400000 { - status = "okay"; - }; - - ehci@40200100 { - status = "okay"; + aliases { + serial0 = &uart0; + gpio0 = &gpio0; + gpio1 = &gpio1; }; gpio-keys-polled { @@ -44,12 +33,12 @@ reset { label = "reset"; - gpios = <&GPIOB 11 1>; + gpios = <&gpio1 11 1>; linux,code = ; }; copy { label = "copy"; - gpios = <&GPIOB 13 1>; + gpios = <&gpio1 13 1>; linux,code = ; }; }; @@ -58,29 +47,39 @@ compatible = "gpio-leds"; status { label = "zyxel:blue:status"; - gpios = <&GPIOB 5 0>; + gpios = <&gpio1 5 0>; }; status2 { label = "zyxel:red:status"; - gpios = <&GPIOB 6 1>; + gpios = <&gpio1 6 1>; }; copy { label = "zyxel:orange:copy"; - gpios = <&GPIOB 8 1>; + gpios = <&gpio1 8 1>; }; }; i2c-gpio { compatible = "i2c-gpio"; - gpios = <&GPIOB 9 0 &GPIOB 10 0>; + gpios = <&gpio1 9 0 &gpio1 10 0>; i2c-gpio,delay-us = <10>; }; }; +&uart0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; +}; + &nandc { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + nand@0 { reg = <0>; #address-cells = <1>; @@ -100,3 +99,18 @@ }; }; }; + +ða { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_etha_mdio>; +}; + +&ehci { + status = "okay"; +}; + +&sata { + status = "okay"; +}; diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-pro.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-pro.dts deleted file mode 100644 index 5b087e93fa..0000000000 --- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-pro.dts +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Copyright (C) 2013 Ma Haijun - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/dts-v1/; -#include "ox820.dtsi" - -/ { - model = "Pogoplug Pro"; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk=serial"; - }; - - pcie-controller@47C00000 { - status = "okay"; - }; - - uart@44200000 { - status = "okay"; - }; - - sata@45900000 { - status = "okay"; - }; - - ethernet@40400000 { - status = "okay"; - }; - - ehci@40200100 { - status = "okay"; - }; - - pinctrl { - leds { - pinctrl_leds: leds-0 { - plxtech,pins = - <0 2 0 0 /* MF_A2 */ - 1 16 0 0 /* MF_B16 */ - 1 17 0 0>; /* MF_B17 */ - }; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_leds>; - - blue { - label = "pogoplug:blue:internal"; - gpios = <&GPIOA 2 0>; - - }; - - orange { - label = "pogoplug:orange:usr"; - gpios = <&GPIOB 16 1>; - }; - - green { - label = "pogoplug:green:usr"; - gpios = <&GPIOB 17 1>; - }; - }; -}; - -&nandc { - status = "okay"; - - nand@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - nand-ecc-mode = "soft"; - nand-ecc-algo = "hamming"; - - partition@0 { - label = "boot"; - reg = <0x00000000 0x00e00000>; - /*read-only;*/ - }; - - partition@e00000 { - label = "ubi"; - reg = <0x00e00000 0x07200000>; - }; - }; -}; diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-v3.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-v3.dts deleted file mode 100644 index be0f6c9077..0000000000 --- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-v3.dts +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Copyright (C) 2014 Daniel Golle - * Copyright (C) 2013 Ma Haijun - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/dts-v1/; -#include "ox820.dtsi" - -/ { - model = "Pogoplug V3"; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk=serial"; - }; - - uart@44200000 { - status = "okay"; - }; - - sata@45900000 { - status = "okay"; - }; - - ethernet@40400000 { - status = "okay"; - }; - - ehci@40200100 { - status = "okay"; - }; - - pinctrl { - leds { - pinctrl_leds: leds-0 { - plxtech,pins = - <0 2 0 0 /* MF_A2 */ - 1 16 0 0 /* MF_B16 */ - 1 17 0 0>; /* MF_B17 */ - }; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_leds>; - - blue { - label = "pogoplug:blue:internal"; - gpios = <&GPIOA 2 0>; - }; - - orange { - label = "pogoplug:orange:usr"; - gpios = <&GPIOB 16 1>; - }; - - green { - label = "pogoplug:green:usr"; - gpios = <&GPIOB 17 1>; - }; - }; - -}; - -&nandc { - status = "okay"; - - nand@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - nand-ecc-mode = "soft"; - nand-ecc-algo = "hamming"; - - partition@0 { - label = "boot"; - reg = <0x00000000 0x00e00000>; - /*read-only;*/ - }; - - partition@e00000 { - label = "ubi"; - reg = <0x00e00000 0x07200000>; - }; - }; -}; diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-shuttle-kd20.dts similarity index 65% rename from target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts rename to target/linux/oxnas/files/arch/arm/boot/dts/ox820-shuttle-kd20.dts index a59addccac..badfa2578e 100644 --- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts +++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-shuttle-kd20.dts @@ -1,12 +1,5 @@ -/* - * Copyright (C) 2014 Daniel Golle - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - /dts-v1/; + #include "ox820.dtsi" #include @@ -14,40 +7,31 @@ / { model = "Shuttle KD20"; - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk=serial mem=256M"; - }; - - pcie-controller@47C00000 { - status = "okay"; - }; - - uart@44200000 { - status = "okay"; - }; + compatible = "shuttle,kd20", "oxsemi,ox820"; - sata@45900000 { - status = "okay"; - nr-ports = <2>; + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; - ethernet@40400000 { - status = "okay"; - snps,phy-addr = <1>; - phy-mode = "rgmii-id"; + memory { + /* 128Mbytes DDR */ + reg = <0x60000000 0x8000000>; }; - ehci@40200100 { - status = "okay"; + aliases { + serial0 = &uart0; + gpio0 = &gpio0; + gpio1 = &gpio1; }; i2c-gpio { compatible = "i2c-gpio"; - gpios = <&GPIOB 9 0 &GPIOB 10 0>; + gpios = <&gpio1 9 0 &gpio1 10 0>; i2c-gpio,delay-us = <10>; #address-cells = <1>; #size-cells = <0>; - pcf8563: rtc@51 { + rtc0: rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; @@ -61,22 +45,22 @@ power { label = "power"; - gpios = <&GPIOA 10 1>; + gpios = <&gpio0 10 1>; linux,code = ; }; reset { label = "reset"; - gpios = <&GPIOA 11 1>; + gpios = <&gpio0 11 1>; linux,code = ; }; eject1 { label = "eject1"; - gpios = <&GPIOA 5 1>; + gpios = <&gpio0 5 1>; linux,code = ; }; eject2 { label = "eject2"; - gpios = <&GPIOA 6 1>; + gpios = <&gpio0 6 1>; linux,code = <162>; }; }; @@ -85,57 +69,67 @@ compatible = "gpio-leds"; status { label = "kd20:blue:status"; - gpios = <&GPIOB 16 0>; + gpios = <&gpio1 16 0>; }; status2 { label = "kd20:red:status"; - gpios = <&GPIOB 17 0>; + gpios = <&gpio1 17 0>; }; hdd1blue { label = "kd20:blue:hdd1"; - gpios = <&GPIOA 27 0>; + gpios = <&gpio0 27 0>; linux,default-trigger = "ata1"; }; hdd1red { label = "kd20:red:hdd1"; - gpios = <&GPIOB 4 0>; + gpios = <&gpio1 4 0>; }; hdd2blue { label = "kd20:blue:hdd2"; - gpios = <&GPIOB 6 0>; + gpios = <&gpio1 6 0>; linux,default-trigger = "ata2"; }; hdd2red { label = "kd20:red:hdd2"; - gpios = <&GPIOB 7 0>; + gpios = <&gpio1 7 0>; }; usb { label = "kd20:blue:usb"; - gpios = <&GPIOB 8 0>; + gpios = <&gpio1 8 0>; }; }; beeper: beeper { compatible = "gpio-beeper"; - gpios = <&GPIOB 11 0>; + gpios = <&gpio1 11 0>; }; gpio-fan { compatible = "gpio-fan"; - gpios = <&GPIOA 2 1>; + gpios = <&gpio0 2 1>; gpio-fan,speed-map = <0 0 3000 1>; }; gpio-poweroff { compatible = "gpio-poweroff"; - gpios = <&GPIOA 9 0>; + gpios = <&gpio0 9 0>; }; }; +&uart0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; +}; + &nandc { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + nand@0 { reg = <0>; #address-cells = <1>; @@ -171,3 +165,23 @@ }; }; }; + +ða { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_etha_mdio>; +}; + +&ehci { + status = "okay"; +}; + +&sata { + status = "okay"; + nr-ports = <2>; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi b/target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi deleted file mode 100644 index c096a7d1c3..0000000000 --- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi +++ /dev/null @@ -1,342 +0,0 @@ -/* - * Copyright (C) 2013 Ma Haijun - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include "skeleton.dtsi" - -/ { - compatible = "plxtech,nas7820", "plxtech,nas782x"; - interrupt-parent = <&gic>; - - aliases { - serial0 = &uart0; - /* alias to determine bank index */ - gpio0 = &GPIOA; - gpio1 = &GPIOB; - - ethernet0 = &gmac; - }; - - cpus { - cpu@0 { - compatible = "arm,arm11mpcore"; - }; - cpu@1 { - compatible = "arm,arm11mpcore"; - }; - }; - - gic: gic@47001000 { - compatible = "arm,arm11mp-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x47001000 0x1000>, - <0x47000100 0x0100>; - }; - - rst: reset-controller@44E00034 { - compatible = "plxtech,nas782x-reset"; - #reset-cells = <1>; - reg = <0x44E00034 0x8>; /* currently not used */ - }; - - rps: rps@44400000 { - compatible = "plxtech,nas782x-rps"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x44400000 0x14>; - interrupts = <0 5 0x304>; - }; - - /* external oscillator */ - osc: oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - sysclk: sysclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <4>; - clock-mult = <1>; - clocks = <&osc>; - }; - - plla: plla@44e001f0 { - compatible = "plxtech,nas782x-plla"; - #clock-cells = <0>; - clocks = <&osc>; - reg = <0x44e001f0 0x10>; - }; - - pllb: pllb@44f001f0 { - compatible = "plxtech,nas782x-pllb"; - #clock-cells = <0>; - clocks = <&osc>; - reg = <0x44f001f0 0x10>; - resets = <&rst 31>; - }; - - stdclk: stdclk { - compatible = "plxtech,nas782x-stdclk"; - #clock-cells = <1>; - clocks = <&osc>; - }; - - twdclk: twdclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - clocks = <&plla>; - }; - - gmacclk: gmacclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - }; - - pinctrl { - /* act as a simple bus, so children will be probed automatically */ - #address-cells = <1>; - #size-cells = <1>; - compatible = "plxtech,nas782x-pinctrl", "simple-bus"; - ranges; - - plxtech,mux-mask = < - 0xFFFFFFFF 0xCC0FFDF9 0xFC000E60 0x0F03F7E0 0xF00C0FE0 - 0x0003FFFF 0x00037FFF 0x0003FFF8 0x00000F00 0x0003F7F3 - >; - - GPIOA: gpio@44000000 { - compatible = "plxtech,nas782x-gpio"; - reg = <0x44000000 0x100>, <0x44E00000 0x200>; - interrupts = <0 21 0x304>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - #gpio-lines = <32>; /* real gpio pin count */ - }; - - GPIOB: gpio@44100000 { - compatible = "plxtech,nas782x-gpio"; - reg = <0x44100000 0x100>, <0x44F00000 0x200>; - interrupts = <0 22 0x304>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - #gpio-lines = <18>; /* real gpio pin count */ - }; - - uart0 { - pinctrl_uart0: uart0-0 { - plxtech,pins = - <0 30 5 0 /* MF_A30 PINMUX_ALT PINMUX_UARTA_SIN */ - 0 31 5 0>; /* MF_A31 PINMUX_ALT PINMUX_UARTA_SOUT */ - }; - }; - - gmac0 { - pinctrl_gmac0: gmac0-0 { - plxtech,pins = - <0 3 1 0 /* MF_A3 PINMUX_2 PINMUX_MACA_MDC */ - 0 4 1 0>; /* MF_A4 PINMUX_2 PINMUX_MACA_MDIO */ - }; - }; - - nand0 { - pinctrl_nand0: nand0-0 { - plxtech,pins = - <0 12 1 0 /* MF_A12 PINMUX_2 PINMUX_STATIC_DATA0 */ - 0 13 1 0 /* MF_A13 PINMUX_2 PINMUX_STATIC_DATA1 */ - 0 14 1 0 /* MF_A14 PINMUX_2 PINMUX_STATIC_DATA2 */ - 0 15 1 0 /* MF_A15 PINMUX_2 PINMUX_STATIC_DATA3 */ - 0 16 1 0 /* MF_A16 PINMUX_2 PINMUX_STATIC_DATA4 */ - 0 17 1 0 /* MF_A17 PINMUX_2 PINMUX_STATIC_DATA5 */ - 0 18 1 0 /* MF_A18 PINMUX_2 PINMUX_STATIC_DATA6 */ - 0 19 1 0 /* MF_A19 PINMUX_2 PINMUX_STATIC_DATA7 */ - - 0 20 1 0 /* MF_A20 PINMUX_2 PINMUX_STATIC_NWE */ - 0 21 1 0 /* MF_A21 PINMUX_2 PINMUX_STATIC_NOE */ - 0 22 1 0 /* MF_A22 PINMUX_2 PINMUX_STATIC_NCS */ - 0 23 1 0 /* MF_A23 PINMUX_2 PINMUX_STATIC_ADDR18 */ - 0 24 1 0>; /* MF_A24 PINMUX_2 PINMUX_STATIC_ADDR19 */ - }; - }; - }; - - pcie-controller@47C00000 { - compatible = "plxtech,nas782x-pcie"; - device_type = "pci"; - #address-cells = <3>; - #size-cells = <2>; - - /* flag & space bus address host address size */ - ranges = < 0x82000000 0 0x48000000 0x48000000 0 0x2000000 - 0xC2000000 0 0x4A000000 0x4A000000 0 0x1E00000 - 0x81000000 0 0x4BE00000 0x4BE00000 0 0x0100000 - 0x80000000 0 0x4BF00000 0x4BF00000 0 0x0100000>; - - bus-range = <0x00 0x7f>; - - /* cfg inbound translator phy*/ - reg = <0x47C00000 0x1000>, <0x47D00000 0x100>, <0x44A00000 0x10>; - - #interrupt-cells = <1>; - /* wild card mask, match all bus address & interrupt specifier */ - /* format: bus address mask, interrupt specifier mask */ - /* each bit 1 means need match, 0 means ignored when match */ - interrupt-map-mask = <0 0 0 0>; - /* format: a list of: bus address, interrupt specifier, - * parent interrupt controller & specifier */ - interrupt-map = <0 0 0 0 &gic 0 19 0x304>; - - gpios = <&GPIOB 12 0>; - clocks = <&stdclk 8>, <&pllb>; - clock-names = "pcie", "busclk"; - resets = <&rst 7>, <&rst 14>; - reset-names = "pcie", "phy"; - - plxtech,pcie-hcsl-bit = <2>; - plxtech,pcie-ctrl-offset = <0x120>; - plxtech,pcie-outbound-offset = <0x138>; - status = "disabled"; - }; - - pcie-controller@47E00000 { - compatible = "plxtech,nas782x-pcie"; - device_type = "pci"; - #address-cells = <3>; - #size-cells = <2>; - - /* flag & space bus address host address size */ - ranges = < 0x82000000 0 0x4C000000 0x4C000000 0 0x2000000 - 0xC2000000 0 0x4E000000 0x4E000000 0 0x1E00000 - 0x81000000 0 0x4FE00000 0x4FE00000 0 0x0100000 - 0x80000000 0 0x4FF00000 0x4FF00000 0 0x0100000>; - - bus-range = <0x80 0xff>; - - /* cfg inbound translator phy*/ - reg = <0x47E00000 0x1000>, <0x47F00000 0x100>, <0x44A00000 0x10>; - - #interrupt-cells = <1>; - /* wild card mask, match all bus address & interrupt specifier */ - /* format: bus address mask, interrupt specifier mask */ - /* each bit 1 means need match, 0 means ignored when match */ - interrupt-map-mask = <0 0 0 0>; - /* format: a list of: bus address, interrupt specifier, - * parent interrupt controller & specifier */ - interrupt-map = <0 0 0 0 &gic 0 20 0x304>; - - /* gpios = <&GPIOB 12 0>; */ - clocks = <&stdclk 11>, <&pllb>; - clock-names = "pcie", "busclk"; - resets = <&rst 23>, <&rst 14>; - reset-names = "pcie", "phy"; - - plxtech,pcie-hcsl-bit = <3>; - plxtech,pcie-ctrl-offset = <0x124>; - plxtech,pcie-outbound-offset = <0x174>; - status = "disabled"; - }; - - local-timer@47000600 { - compatible = "arm,arm11mp-twd-timer"; - reg = <0x47000600 0x20>; - interrupts = <1 13 0x304>; /* percpu, irq 29, cpu mask 3, level high */ - clocks = <&twdclk>; - }; - - watchdog@47000620 { - compatible = "mpcore_wdt"; - reg = <0x47000620 0x20>; - interrupts = <1 14 0x304>; /* percpu, irq 30, cpu mask 3, level high */ - clocks = <&twdclk>; - }; - - timer@44400200 { - compatible = "plxtech,nas782x-rps-timer"; - reg = <0x44400200 0x40>; - clocks = <&sysclk>; - }; - - uart0: uart@44200000 { - compatible = "ns16550a"; - reg = <0x44200000 0x100>; - clock-frequency = <6250000>; - interrupts = <0 23 0x304>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; - status = "disabled"; - }; - - sata@45900000 { - compatible = "plxtech,nas782x-sata"; - /* ports dmactl sgdma */ - reg = <0x45900000 0x20000>, <0x459A0000 0x40>, <0x459B0000 0x20>, - /* core phy descriptors (optional) */ - <0x459E0000 0x2000>, <0x44900000 0x0C>, <0x50000000 0x1000>; - interrupts = <0 18 0x304>; - clocks = <&stdclk 4>; - resets = <&rst 11>, <&rst 12>, <&rst 13>; - reset-names = "sata", "link", "phy"; - nr-ports = <1>; - status = "disabled"; - }; - - nandc: nand-controller@41000000 { - compatible = "oxsemi,ox820-nand"; - reg = <0x41000000 0x100000>; - clocks = <&stdclk 9>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand0>; - resets = <&rst 15>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - gmac: ethernet@40400000 { - compatible = "plxtech,nas782x-gmac", "snps,dwmac"; - reg = <0x40400000 0x2000>; - interrupts = <0 8 0x304>, <0 17 0x304>; - interrupt-names = "macirq", "eth_wake_irq"; - mac-address = [000000000000]; /* Filled in by U-Boot */ - phy-mode = "rgmii"; - clocks = <&stdclk 7>, <&gmacclk>; - clock-names = "gmac", "stmmaceth"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gmac0>; - resets = <&rst 6>; - status = "disabled"; - }; - - ehci@40200100 { - compatible = "plxtech,nas782x-ehci"; - reg = <0x40200100 0xf00>; - interrupts = <0 7 0x304>; - clocks = <&stdclk 6>, <&pllb>, <&stdclk 12>; - clock-names = "usb", "refsrc", "phyref"; - resets = <&rst 4>, <&rst 5>, <&rst 26>; - reset-names = "host", "phya", "phyb"; - /* Otherwise ref300 is used, which is derived from sata phy - * in that case, usb depends on sata initialization */ - /* FIXME: how to make this dependency explicit ? */ - plxtech,ehci_use_pllb; - status = "disabled"; - }; -}; diff --git a/target/linux/oxnas/files/arch/arm/configs/ox820_defconfig b/target/linux/oxnas/files/arch/arm/configs/ox820_defconfig deleted file mode 100644 index bb0a9d68a8..0000000000 --- a/target/linux/oxnas/files/arch/arm/configs/ox820_defconfig +++ /dev/null @@ -1,104 +0,0 @@ -CONFIG_CROSS_COMPILE="arm-linux-gnueabi-" -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_NO_HZ_IDLE=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_IRQ_TIME_ACCOUNTING=y -CONFIG_CGROUPS=y -CONFIG_NAMESPACES=y -CONFIG_EMBEDDED=y -# CONFIG_COMPAT_BRK is not set -CONFIG_JUMP_LABEL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_ARCH_OXNAS=y -# CONFIG_DMA_CACHE_RWFO is not set -CONFIG_DMA_CACHE_FIQ_BROADCAST=y -CONFIG_PCI=y -CONFIG_PCI_OXNAS=y -CONFIG_SMP=y -# CONFIG_SMP_ON_UP is not set -CONFIG_NR_CPUS=2 -CONFIG_HOTPLUG_CPU=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_UACCESS_WITH_MEMCPY=y -CONFIG_USE_OF=y -CONFIG_BINFMT_MISC=y -# CONFIG_SUSPEND is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IPV6=y -CONFIG_CFG80211=y -CONFIG_MAC80211=y -CONFIG_MAC80211_RC_PID=y -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_OXNAS=y -CONFIG_MTD_UBI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_ATA=y -CONFIG_SATA_OXNAS=y -CONFIG_NETDEVICES=y -CONFIG_STMMAC_ETH=y -CONFIG_STMMAC_DEBUG_FS=y -CONFIG_STMMAC_DA=y -CONFIG_ATH_CARDS=y -CONFIG_ATH9K=y -CONFIG_ATH9K_LEGACY_RATE_CONTROL=y -# CONFIG_RTL_CARDS is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=1 -CONFIG_SERIAL_8250_RUNTIME_UARTS=1 -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_GPIO_SYSFS=y -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_OXNAS=y -CONFIG_USB_STORAGE=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_ONESHOT=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_COMMON_CLK_DEBUG=y -CONFIG_EXT2_FS=y -CONFIG_EXT4_FS=y -CONFIG_FUSE_FS=y -CONFIG_VFAT_FS=y -CONFIG_NTFS_FS=m -CONFIG_NTFS_RW=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_UBIFS_FS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_PRINTK_TIME=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_FTRACE is not set -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_LL_UART_8250=y -CONFIG_DEBUG_UART_PHYS=0x44200000 -CONFIG_DEBUG_UART_VIRT=0xF0000000 -CONFIG_DEBUG_UART_8250_SHIFT=0 -CONFIG_EARLY_PRINTK=y -CONFIG_CRYPTO_ANSI_CPRNG=y diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/uncompress.h b/target/linux/oxnas/files/arch/arm/include/debug/uncompress-ox820.h similarity index 100% rename from target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/uncompress.h rename to target/linux/oxnas/files/arch/arm/include/debug/uncompress-ox820.h diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/Kconfig b/target/linux/oxnas/files/arch/arm/mach-oxnas/Kconfig deleted file mode 100644 index 6bdf3f6efd..0000000000 --- a/target/linux/oxnas/files/arch/arm/mach-oxnas/Kconfig +++ /dev/null @@ -1,25 +0,0 @@ -choice - prompt "Oxnas platform type" - default MACH_OXNAS - depends on ARCH_OXNAS - -config MACH_OX820 - bool "Generic NAS7820 Support" - select ARM_GIC - select GENERIC_CLOCKEVENTS - select CPU_V6K - select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if SMP - select HAVE_SMP - select PLXTECH_RPS - select CLKSRC_OF - select CLKSRC_RPS_TIMER - select USB_ARCH_HAS_EHCI - select PINCTRL_OXNAS - select PINCTRL - select RESET_CONTROLLER_OXNAS - select ARCH_WANT_LIBATA_LEDS - help - Include support for the ox820 platform. - -endchoice diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile b/target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile deleted file mode 100644 index 6862c34981..0000000000 --- a/target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for the linux kernel. -# - -obj-$(CONFIG_MACH_OX820) += mach-ox820.o -obj-$(CONFIG_SMP) += platsmp.o headsmp.o -obj-$(CONFIG_DMA_CACHE_FIQ_BROADCAST) += fiq.o -obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile.boot b/target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile.boot deleted file mode 100644 index b52e473d64..0000000000 --- a/target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-y += 0x60008000 -params_phys-y := 0x60000100 diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/fiq.S b/target/linux/oxnas/files/arch/arm/mach-oxnas/fiq.S deleted file mode 100644 index 6acd5a7394..0000000000 --- a/target/linux/oxnas/files/arch/arm/mach-oxnas/fiq.S +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Copyright (C) 2012 Gateworks Corporation - * Chris Lang - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include - -#define D_CACHE_LINE_SIZE 32 - - .text - -/* - * R8 - DMA Start Address - * R9 - DMA Length - * R10 - DMA Direction - * R11 - DMA type - * R12 - fiq_buffer Address -*/ - - .global ox820_fiq_end -ENTRY(ox820_fiq_start) - str r8, [r13] - - ldmia r12, {r8, r9, r10} - and r11, r10, #0x3000000 - and r10, r10, #0xff - - teq r11, #0x1000000 - beq ox820_dma_map_area - teq r11, #0x2000000 - beq ox820_dma_unmap_area - /* fall through */ -ox820_dma_flush_range: - bic r8, r8, #D_CACHE_LINE_SIZE - 1 -1: - mcr p15, 0, r8, c7, c14, 1 @ clean & invalidate D line - add r8, r8, #D_CACHE_LINE_SIZE - cmp r8, r9 - blo 1b - /* fall through */ -ox820_fiq_exit: - mov r8, #0 - str r8, [r12, #8] - mcr p15, 0, r8, c7, c10, 4 @ drain write buffer - subs pc, lr, #4 - -ox820_dma_map_area: - add r9, r9, r8 - teq r10, #DMA_FROM_DEVICE - beq ox820_dma_inv_range - teq r10, #DMA_TO_DEVICE - bne ox820_dma_flush_range - /* fall through */ -ox820_dma_clean_range: - bic r8, r8, #D_CACHE_LINE_SIZE - 1 -1: - mcr p15, 0, r8, c7, c10, 1 @ clean D line - add r8, r8, #D_CACHE_LINE_SIZE - cmp r8, r9 - blo 1b - b ox820_fiq_exit - -ox820_dma_unmap_area: - add r9, r9, r8 - teq r10, #DMA_TO_DEVICE - beq ox820_fiq_exit - /* fall through */ -ox820_dma_inv_range: - tst r8, #D_CACHE_LINE_SIZE - 1 - bic r8, r8, #D_CACHE_LINE_SIZE - 1 - mcrne p15, 0, r8, c7, c10, 1 @ clean D line - tst r9, #D_CACHE_LINE_SIZE - 1 - bic r9, r9, #D_CACHE_LINE_SIZE - 1 - mcrne p15, 0, r9, c7, c14, 1 @ clean & invalidate D line -1: - mcr p15, 0, r8, c7, c6, 1 @ invalidate D line - add r8, r8, #D_CACHE_LINE_SIZE - cmp r8, r9 - blo 1b - b ox820_fiq_exit - -ox820_fiq_end: diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/headsmp.S b/target/linux/oxnas/files/arch/arm/mach-oxnas/headsmp.S deleted file mode 100644 index a63edae62b..0000000000 --- a/target/linux/oxnas/files/arch/arm/mach-oxnas/headsmp.S +++ /dev/null @@ -1,27 +0,0 @@ -/* - * linux/arch/arm/mach-ox820/headsmp.S - * - * Copyright (c) 2003 ARM Limited - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include - - __INIT - -/* - * OX820 specific entry point for secondary CPUs. - */ -ENTRY(ox820_secondary_startup) - mov r4, #0 - /* invalidate both caches and branch target cache */ - mcr p15, 0, r4, c7, c7, 0 - /* - * we've been released from the holding pen: secondary_stack - * should now contain the SVC stack for this core - */ - b secondary_startup diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/hotplug.c b/target/linux/oxnas/files/arch/arm/mach-oxnas/hotplug.c deleted file mode 100644 index e3c9cb5db7..0000000000 --- a/target/linux/oxnas/files/arch/arm/mach-oxnas/hotplug.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * linux/arch/arm/mach-realview/hotplug.c - * - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include - -#include -#include - -static inline void cpu_enter_lowpower(void) -{ - unsigned int v; - - asm volatile( - " mcr p15, 0, %1, c7, c5, 0\n" - " mcr p15, 0, %1, c7, c10, 4\n" - /* - * Turn off coherency - */ - " mrc p15, 0, %0, c1, c0, 1\n" - " bic %0, %0, #0x20\n" - " mcr p15, 0, %0, c1, c0, 1\n" - " mrc p15, 0, %0, c1, c0, 0\n" - " bic %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 0\n" - : "=&r" (v) - : "r" (0), "Ir" (CR_C) - : "cc"); -} - -static inline void cpu_leave_lowpower(void) -{ - unsigned int v; - - asm volatile( "mrc p15, 0, %0, c1, c0, 0\n" - " orr %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 0\n" - " mrc p15, 0, %0, c1, c0, 1\n" - " orr %0, %0, #0x20\n" - " mcr p15, 0, %0, c1, c0, 1\n" - : "=&r" (v) - : "Ir" (CR_C) - : "cc"); -} - -static inline void platform_do_lowpower(unsigned int cpu, int *spurious) -{ - /* - * there is no power-control hardware on this platform, so all - * we can do is put the core into WFI; this is safe as the calling - * code will have already disabled interrupts - */ - for (;;) { - /* - * here's the WFI - */ - asm(".word 0xe320f003\n" - : - : - : "memory", "cc"); - - if (pen_release == cpu_logical_map(cpu)) { - /* - * OK, proper wakeup, we're done - */ - break; - } - - /* - * Getting here, means that we have come out of WFI without - * having been woken up - this shouldn't happen - * - * Just note it happening - when we're woken, we can report - * its occurrence. - */ - (*spurious)++; - } -} - -/* - * platform-specific code to shutdown a CPU - * - * Called with IRQs disabled - */ -void ox820_cpu_die(unsigned int cpu) -{ - int spurious = 0; - - /* - * we're ready for shutdown now, so do it - */ - cpu_enter_lowpower(); - platform_do_lowpower(cpu, &spurious); - - /* - * bring this CPU back into the world of cache - * coherency, and then restore interrupts - */ - cpu_leave_lowpower(); - - if (spurious) - pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious); -} diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/hardware.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/hardware.h deleted file mode 100644 index caae772c31..0000000000 --- a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/hardware.h +++ /dev/null @@ -1,233 +0,0 @@ -/* - * arch/arm/mach-0x820/include/mach/hardware.h - * - * Copyright (C) 2009 Oxford Semiconductor Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include -#include - -/* - * Location of flags and vectors in SRAM for controlling the booting of the - * secondary ARM11 processors. - */ - -#define OXNAS_SCU_BASE_VA OXNAS_PERCPU_BASE_VA -#define OXNAS_GICN_BASE_VA(n) (OXNAS_PERCPU_BASE_VA + 0x200 + n*0x100) - -#define HOLDINGPEN_CPU IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc8) -#define HOLDINGPEN_LOCATION IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc4) - -/** - * System block reset and clock control - */ -#define SYS_CTRL_PCI_STAT IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x20) -#define SYSCTRL_CLK_STAT IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x24) -#define SYS_CTRL_CLK_SET_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x2C) -#define SYS_CTRL_CLK_CLR_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x30) -#define SYS_CTRL_RST_SET_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x34) -#define SYS_CTRL_RST_CLR_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x38) - -#define SYS_CTRL_PLLSYS_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x48) -#define SYS_CTRL_CLK_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x64) -#define SYS_CTRL_PLLSYS_KEY_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x6C) -#define SYS_CTRL_GMAC_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x78) -#define SYS_CTRL_GMAC_DELAY_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x100) - -/* Scratch registers */ -#define SYS_CTRL_SCRATCHWORD0 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc4) -#define SYS_CTRL_SCRATCHWORD1 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc8) -#define SYS_CTRL_SCRATCHWORD2 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xcc) -#define SYS_CTRL_SCRATCHWORD3 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xd0) - -#define SYS_CTRL_PLLA_CTRL0 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F0) -#define SYS_CTRL_PLLA_CTRL1 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F4) -#define SYS_CTRL_PLLA_CTRL2 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F8) -#define SYS_CTRL_PLLA_CTRL3 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1FC) - -#define SYS_CTRL_USBHSMPH_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x40) -#define SYS_CTRL_USBHSMPH_STAT IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x44) -#define SYS_CTRL_REF300_DIV IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xF8) -#define SYS_CTRL_USBHSPHY_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x84) -#define SYS_CTRL_USB_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x90) - -/* pcie */ -#define SYS_CTRL_HCSL_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x114) - -/* System control multi-function pin function selection */ -#define SYS_CTRL_SECONDARY_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x14) -#define SYS_CTRL_TERTIARY_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x8c) -#define SYS_CTRL_QUATERNARY_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x94) -#define SYS_CTRL_DEBUG_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x9c) -#define SYS_CTRL_ALTERNATIVE_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xa4) -#define SYS_CTRL_PULLUP_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xac) - -/* Secure control multi-function pin function selection */ -#define SEC_CTRL_SECONDARY_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x14) -#define SEC_CTRL_TERTIARY_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x8c) -#define SEC_CTRL_QUATERNARY_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x94) -#define SEC_CTRL_DEBUG_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x9c) -#define SEC_CTRL_ALTERNATIVE_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0xa4) -#define SEC_CTRL_PULLUP_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0xac) - -#define SEC_CTRL_COPRO_CTRL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x68) -#define SEC_CTRL_SECURE_CTRL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x98) -#define SEC_CTRL_LEON_DEBUG IOMEM(OXNAS_SECCRTL_BASE_VA + 0xF0) -#define SEC_CTRL_PLLB_DIV_CTRL IOMEM(OXNAS_SECCRTL_BASE_VA + 0xF8) -#define SEC_CTRL_PLLB_CTRL0 IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F0) -#define SEC_CTRL_PLLB_CTRL1 IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F4) -#define SEC_CTRL_PLLB_CTRL8 IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F4) - -#define RPSA_IRQ_SOFT IOMEM(OXNAS_RPSA_BASE_VA + 0x10) -#define RPSA_FIQ_ENABLE IOMEM(OXNAS_RPSA_BASE_VA + 0x108) -#define RPSA_FIQ_DISABLE IOMEM(OXNAS_RPSA_BASE_VA + 0x10C) -#define RPSA_FIQ_IRQ_TO_FIQ IOMEM(OXNAS_RPSA_BASE_VA + 0x1FC) - -#define RPSC_IRQ_SOFT IOMEM(OXNAS_RPSC_BASE_VA + 0x10) -#define RPSC_FIQ_ENABLE IOMEM(OXNAS_RPSC_BASE_VA + 0x108) -#define RPSC_FIQ_DISABLE IOMEM(OXNAS_RPSC_BASE_VA + 0x10C) -#define RPSC_FIQ_IRQ_TO_FIQ IOMEM(OXNAS_RPSC_BASE_VA + 0x1FC) - -#define RPSA_TIMER2_VAL IOMEM(OXNAS_RPSA_BASE_VA + 0x224) - -#define REF300_DIV_INT_SHIFT 8 -#define REF300_DIV_FRAC_SHIFT 0 -#define REF300_DIV_INT(val) ((val) << REF300_DIV_INT_SHIFT) -#define REF300_DIV_FRAC(val) ((val) << REF300_DIV_FRAC_SHIFT) - -#define USBHSPHY_SUSPENDM_MANUAL_ENABLE 16 -#define USBHSPHY_SUSPENDM_MANUAL_STATE 15 -#define USBHSPHY_ATE_ESET 14 -#define USBHSPHY_TEST_DIN 6 -#define USBHSPHY_TEST_ADD 2 -#define USBHSPHY_TEST_DOUT_SEL 1 -#define USBHSPHY_TEST_CLK 0 - -#define USB_CTRL_USBAPHY_CKSEL_SHIFT 5 -#define USB_CLK_XTAL0_XTAL1 (0 << USB_CTRL_USBAPHY_CKSEL_SHIFT) -#define USB_CLK_XTAL0 (1 << USB_CTRL_USBAPHY_CKSEL_SHIFT) -#define USB_CLK_INTERNAL (2 << USB_CTRL_USBAPHY_CKSEL_SHIFT) - -#define USBAMUX_DEVICE BIT(4) - -#define USBPHY_REFCLKDIV_SHIFT 2 -#define USB_PHY_REF_12MHZ (0 << USBPHY_REFCLKDIV_SHIFT) -#define USB_PHY_REF_24MHZ (1 << USBPHY_REFCLKDIV_SHIFT) -#define USB_PHY_REF_48MHZ (2 << USBPHY_REFCLKDIV_SHIFT) - -#define USB_CTRL_USB_CKO_SEL_BIT 0 - -#define USB_INT_CLK_XTAL 0 -#define USB_INT_CLK_REF300 2 -#define USB_INT_CLK_PLLB 3 - -#define SYS_CTRL_GMAC_CKEN_RX_IN 14 -#define SYS_CTRL_GMAC_CKEN_RXN_OUT 13 -#define SYS_CTRL_GMAC_CKEN_RX_OUT 12 -#define SYS_CTRL_GMAC_CKEN_TX_IN 10 -#define SYS_CTRL_GMAC_CKEN_TXN_OUT 9 -#define SYS_CTRL_GMAC_CKEN_TX_OUT 8 -#define SYS_CTRL_GMAC_RX_SOURCE 7 -#define SYS_CTRL_GMAC_TX_SOURCE 6 -#define SYS_CTRL_GMAC_LOW_TX_SOURCE 4 -#define SYS_CTRL_GMAC_AUTO_TX_SOURCE 3 -#define SYS_CTRL_GMAC_RGMII 2 -#define SYS_CTRL_GMAC_SIMPLE_MUX 1 -#define SYS_CTRL_GMAC_CKEN_GTX 0 -#define SYS_CTRL_GMAC_TX_VARDELAY_SHIFT 0 -#define SYS_CTRL_GMAC_TXN_VARDELAY_SHIFT 8 -#define SYS_CTRL_GMAC_RX_VARDELAY_SHIFT 16 -#define SYS_CTRL_GMAC_RXN_VARDELAY_SHIFT 24 -#define SYS_CTRL_GMAC_TX_VARDELAY(d) ((d)< - -#define OXNAS_UART1_BASE 0x44200000 -#define OXNAS_UART1_SIZE SZ_32 -#define OXNAS_UART1_BASE_VA 0xF0000000 - -#define OXNAS_UART2_BASE 0x44300000 -#define OXNAS_UART2_SIZE SZ_32 - -#define OXNAS_PERCPU_BASE 0x47000000 -#define OXNAS_PERCPU_SIZE SZ_8K -#define OXNAS_PERCPU_BASE_VA 0xF0002000 - -#define OXNAS_SYSCRTL_BASE 0x44E00000 -#define OXNAS_SYSCRTL_SIZE SZ_4K -#define OXNAS_SYSCRTL_BASE_VA 0xF0004000 - -#define OXNAS_SECCRTL_BASE 0x44F00000 -#define OXNAS_SECCRTL_SIZE SZ_4K -#define OXNAS_SECCRTL_BASE_VA 0xF0005000 - -#define OXNAS_RPSA_BASE 0x44400000 -#define OXNAS_RPSA_SIZE SZ_4K -#define OXNAS_RPSA_BASE_VA 0xF0006000 - -#define OXNAS_RPSC_BASE 0x44500000 -#define OXNAS_RPSC_SIZE SZ_4K -#define OXNAS_RPSC_BASE_VA 0xF0007000 - -#endif diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/irqs.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/irqs.h deleted file mode 100644 index bcafd10ae0..0000000000 --- a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/irqs.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#define IRQ_SOFT 1 -#define NR_IRQS 160 - -#endif diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/smp.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/smp.h deleted file mode 100644 index 1128635963..0000000000 --- a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/smp.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * smp.h - * - * Created on: Sep 24, 2013 - * Author: mahaijun - */ - -#ifndef _NAS782X_SMP_H_ -#define _NAS782X_SMP_H_ - -#include - -extern void ox820_secondary_startup(void); -extern void ox820_cpu_die(unsigned int cpu); - -static inline void write_pen_release(int val) -{ - writel(val, HOLDINGPEN_CPU); -} - -static inline int read_pen_release(void) -{ - return readl(HOLDINGPEN_CPU); -} - -extern struct smp_operations ox820_smp_ops; - -extern unsigned char ox820_fiq_start, ox820_fiq_end; -extern void v6_dma_map_area(const void *, size_t, int); -extern void v6_dma_unmap_area(const void *, size_t, int); -extern void v6_dma_flush_range(const void *, const void *); -extern void v6_flush_kern_dcache_area(void *, size_t); - -#endif /* _NAS782X_SMP_H_ */ diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/timex.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/timex.h deleted file mode 100644 index 4133594d16..0000000000 --- a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/timex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#define CLOCK_TICK_RATE 6250000 - -#endif diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/utils.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/utils.h deleted file mode 100644 index 910d7019c7..0000000000 --- a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/utils.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef _NAS782X_UTILS_H -#define _NAS782X_UTILS_H - -#include -#include - -static inline void oxnas_register_clear_mask(void __iomem *p, unsigned mask) -{ - u32 val = readl_relaxed(p); - - val &= ~mask; - writel_relaxed(val, p); -} - -static inline void oxnas_register_set_mask(void __iomem *p, unsigned mask) -{ - u32 val = readl_relaxed(p); - - val |= mask; - writel_relaxed(val, p); -} - -static inline void oxnas_register_value_mask(void __iomem *p, - unsigned mask, unsigned new_value) -{ - /* TODO sanity check mask & new_value = new_value */ - u32 val = readl_relaxed(p); - - val &= ~mask; - val |= new_value; - writel_relaxed(val, p); -} - -#endif /* _NAS782X_UTILS_H */ diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/mach-ox820.c b/target/linux/oxnas/files/arch/arm/mach-oxnas/mach-ox820.c deleted file mode 100644 index 31b7c90582..0000000000 --- a/target/linux/oxnas/files/arch/arm/mach-oxnas/mach-ox820.c +++ /dev/null @@ -1,183 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static struct map_desc ox820_io_desc[] __initdata = { - { - .virtual = (unsigned long)OXNAS_PERCPU_BASE_VA, - .pfn = __phys_to_pfn(OXNAS_PERCPU_BASE), - .length = OXNAS_PERCPU_SIZE, - .type = MT_DEVICE, - }, - { - .virtual = (unsigned long)OXNAS_SYSCRTL_BASE_VA, - .pfn = __phys_to_pfn(OXNAS_SYSCRTL_BASE), - .length = OXNAS_SYSCRTL_SIZE, - .type = MT_DEVICE, - }, - { - .virtual = (unsigned long)OXNAS_SECCRTL_BASE_VA, - .pfn = __phys_to_pfn(OXNAS_SECCRTL_BASE), - .length = OXNAS_SECCRTL_SIZE, - .type = MT_DEVICE, - }, - { - .virtual = (unsigned long)OXNAS_RPSA_BASE_VA, - .pfn = __phys_to_pfn(OXNAS_RPSA_BASE), - .length = OXNAS_RPSA_SIZE, - .type = MT_DEVICE, - }, - { - .virtual = (unsigned long)OXNAS_RPSC_BASE_VA, - .pfn = __phys_to_pfn(OXNAS_RPSC_BASE), - .length = OXNAS_RPSC_SIZE, - .type = MT_DEVICE, - }, -}; - -void __init ox820_map_common_io(void) -{ - debug_ll_io_init(); - iotable_init(ox820_io_desc, ARRAY_SIZE(ox820_io_desc)); -} - -static void __init ox820_dt_init(void) -{ - int ret; - - ret = of_platform_populate(NULL, of_default_bus_match_table, NULL, - NULL); - - if (ret) { - pr_err("of_platform_populate failed: %d\n", ret); - BUG(); - } - -} - -static void __init ox820_timer_init(void) -{ - of_clk_init(NULL); - clocksource_probe(); -} - -void ox820_init_early(void) -{ - -} - -void ox820_assert_system_reset(enum reboot_mode mode, const char *cmd) -{ - u32 value; - -/* Assert reset to cores as per power on defaults - * Don't touch the DDR interface as things will come to an impromptu stop - * NB Possibly should be asserting reset for PLLB, but there are timing - * concerns here according to the docs */ - value = BIT(SYS_CTRL_RST_COPRO) | - BIT(SYS_CTRL_RST_USBHS) | - BIT(SYS_CTRL_RST_USBHSPHYA) | - BIT(SYS_CTRL_RST_MACA) | - BIT(SYS_CTRL_RST_PCIEA) | - BIT(SYS_CTRL_RST_SGDMA) | - BIT(SYS_CTRL_RST_CIPHER) | - BIT(SYS_CTRL_RST_SATA) | - BIT(SYS_CTRL_RST_SATA_LINK) | - BIT(SYS_CTRL_RST_SATA_PHY) | - BIT(SYS_CTRL_RST_PCIEPHY) | - BIT(SYS_CTRL_RST_STATIC) | - BIT(SYS_CTRL_RST_UART1) | - BIT(SYS_CTRL_RST_UART2) | - BIT(SYS_CTRL_RST_MISC) | - BIT(SYS_CTRL_RST_I2S) | - BIT(SYS_CTRL_RST_SD) | - BIT(SYS_CTRL_RST_MACB) | - BIT(SYS_CTRL_RST_PCIEB) | - BIT(SYS_CTRL_RST_VIDEO) | - BIT(SYS_CTRL_RST_USBHSPHYB) | - BIT(SYS_CTRL_RST_USBDEV); - - writel(value, SYS_CTRL_RST_SET_CTRL); - - /* Release reset to cores as per power on defaults */ - writel(BIT(SYS_CTRL_RST_GPIO), SYS_CTRL_RST_CLR_CTRL); - - /* Disable clocks to cores as per power-on defaults - must leave DDR - * related clocks enabled otherwise we'll stop rather abruptly. */ - value = - BIT(SYS_CTRL_CLK_COPRO) | - BIT(SYS_CTRL_CLK_DMA) | - BIT(SYS_CTRL_CLK_CIPHER) | - BIT(SYS_CTRL_CLK_SD) | - BIT(SYS_CTRL_CLK_SATA) | - BIT(SYS_CTRL_CLK_I2S) | - BIT(SYS_CTRL_CLK_USBHS) | - BIT(SYS_CTRL_CLK_MAC) | - BIT(SYS_CTRL_CLK_PCIEA) | - BIT(SYS_CTRL_CLK_STATIC) | - BIT(SYS_CTRL_CLK_MACB) | - BIT(SYS_CTRL_CLK_PCIEB) | - BIT(SYS_CTRL_CLK_REF600) | - BIT(SYS_CTRL_CLK_USBDEV); - - writel(value, SYS_CTRL_CLK_CLR_CTRL); - - /* Enable clocks to cores as per power-on defaults */ - - /* Set sys-control pin mux'ing as per power-on defaults */ - writel(0, SYS_CTRL_SECONDARY_SEL); - writel(0, SYS_CTRL_TERTIARY_SEL); - writel(0, SYS_CTRL_QUATERNARY_SEL); - writel(0, SYS_CTRL_DEBUG_SEL); - writel(0, SYS_CTRL_ALTERNATIVE_SEL); - writel(0, SYS_CTRL_PULLUP_SEL); - - writel(0, SEC_CTRL_SECONDARY_SEL); - writel(0, SEC_CTRL_TERTIARY_SEL); - writel(0, SEC_CTRL_QUATERNARY_SEL); - writel(0, SEC_CTRL_DEBUG_SEL); - writel(0, SEC_CTRL_ALTERNATIVE_SEL); - writel(0, SEC_CTRL_PULLUP_SEL); - - /* No need to save any state, as the ROM loader can determine whether - * reset is due to power cycling or programatic action, just hit the - * (self-clearing) CPU reset bit of the block reset register */ - value = - BIT(SYS_CTRL_RST_SCU) | - BIT(SYS_CTRL_RST_ARM0) | - BIT(SYS_CTRL_RST_ARM1); - - writel(value, SYS_CTRL_RST_SET_CTRL); -} - -static const char * const ox820_dt_board_compat[] = { - "plxtech,nas7820", - "plxtech,nas7821", - "plxtech,nas7825", - NULL -}; - -DT_MACHINE_START(OX820_DT, "PLXTECH NAS782X SoC (Flattened Device Tree)") - .map_io = ox820_map_common_io, - .smp = smp_ops(ox820_smp_ops), - .init_early = ox820_init_early, - .init_time = ox820_timer_init, - .init_machine = ox820_dt_init, - .restart = ox820_assert_system_reset, - .dt_compat = ox820_dt_board_compat, -MACHINE_END diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/platsmp.c b/target/linux/oxnas/files/arch/arm/mach-oxnas/platsmp.c deleted file mode 100644 index 8e4e2d8273..0000000000 --- a/target/linux/oxnas/files/arch/arm/mach-oxnas/platsmp.c +++ /dev/null @@ -1,315 +0,0 @@ -/* - * arch/arm/mach-ox820/platsmp.c - * - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#ifdef CONFIG_DMA_CACHE_FIQ_BROADCAST - -#define FIQ_GENERATE 0x00000002 -#define OXNAS_MAP_AREA 0x01000000 -#define OXNAS_UNMAP_AREA 0x02000000 -#define OXNAS_FLUSH_RANGE 0x03000000 - -struct fiq_req { - union { - struct { - const void *addr; - size_t size; - } map; - struct { - const void *addr; - size_t size; - } unmap; - struct { - const void *start; - const void *end; - } flush; - }; - volatile uint flags; - void __iomem *reg; -} ____cacheline_aligned; - -static struct fiq_handler fh = { - .name = "oxnas-fiq" -}; - -DEFINE_PER_CPU(struct fiq_req, fiq_data); - -static inline void ox820_set_fiq_regs(unsigned int cpu) -{ - struct pt_regs FIQ_regs; - struct fiq_req *fiq_req = &per_cpu(fiq_data, !cpu); - - FIQ_regs.ARM_r8 = 0; - FIQ_regs.ARM_ip = (unsigned int)fiq_req; - FIQ_regs.ARM_sp = (int)(cpu ? RPSC_IRQ_SOFT : RPSA_IRQ_SOFT); - fiq_req->reg = cpu ? RPSC_IRQ_SOFT : RPSA_IRQ_SOFT; - - set_fiq_regs(&FIQ_regs); -} - -static void __init ox820_init_fiq(void) -{ - void *fiqhandler_start; - unsigned int fiqhandler_length; - int ret; - - fiqhandler_start = &ox820_fiq_start; - fiqhandler_length = &ox820_fiq_end - &ox820_fiq_start; - - ret = claim_fiq(&fh); - - if (ret) - return; - - set_fiq_handler(fiqhandler_start, fiqhandler_length); - - writel(IRQ_SOFT, RPSA_FIQ_IRQ_TO_FIQ); - writel(1, RPSA_FIQ_ENABLE); - writel(IRQ_SOFT, RPSC_FIQ_IRQ_TO_FIQ); - writel(1, RPSC_FIQ_ENABLE); -} - -void fiq_dma_map_area(const void *addr, size_t size, int dir) -{ - unsigned long flags; - struct fiq_req *req; - - raw_local_irq_save(flags); - /* currently, not possible to take cpu0 down, so only check cpu1 */ - if (!cpu_online(1)) { - raw_local_irq_restore(flags); - v6_dma_map_area(addr, size, dir); - return; - } - - req = this_cpu_ptr(&fiq_data); - req->map.addr = addr; - req->map.size = size; - req->flags = dir | OXNAS_MAP_AREA; - smp_mb(); - - writel_relaxed(FIQ_GENERATE, req->reg); - - v6_dma_map_area(addr, size, dir); - while (req->flags) - barrier(); - - raw_local_irq_restore(flags); -} - -void fiq_dma_unmap_area(const void *addr, size_t size, int dir) -{ - unsigned long flags; - struct fiq_req *req; - - raw_local_irq_save(flags); - /* currently, not possible to take cpu0 down, so only check cpu1 */ - if (!cpu_online(1)) { - raw_local_irq_restore(flags); - v6_dma_unmap_area(addr, size, dir); - return; - } - - req = this_cpu_ptr(&fiq_data); - req->unmap.addr = addr; - req->unmap.size = size; - req->flags = dir | OXNAS_UNMAP_AREA; - smp_mb(); - - writel_relaxed(FIQ_GENERATE, req->reg); - - v6_dma_unmap_area(addr, size, dir); - while (req->flags) - barrier(); - - raw_local_irq_restore(flags); -} - -void fiq_dma_flush_range(const void *start, const void *end) -{ - unsigned long flags; - struct fiq_req *req; - - raw_local_irq_save(flags); - /* currently, not possible to take cpu0 down, so only check cpu1 */ - if (!cpu_online(1)) { - raw_local_irq_restore(flags); - v6_dma_flush_range(start, end); - return; - } - - req = this_cpu_ptr(&fiq_data); - - req->flush.start = start; - req->flush.end = end; - req->flags = OXNAS_FLUSH_RANGE; - smp_mb(); - - writel_relaxed(FIQ_GENERATE, req->reg); - - v6_dma_flush_range(start, end); - - while (req->flags) - barrier(); - - raw_local_irq_restore(flags); -} - -void fiq_flush_kern_dcache_area(void *addr, size_t size) -{ - fiq_dma_flush_range(addr, addr + size); -} -#else - -#define ox820_set_fiq_regs(cpu) do {} while (0) /* nothing */ -#define ox820_init_fiq() do {} while (0) /* nothing */ - -#endif /* DMA_CACHE_FIQ_BROADCAST */ - -static DEFINE_SPINLOCK(boot_lock); - -void ox820_secondary_init(unsigned int cpu) -{ - /* - * Setup Secondary Core FIQ regs - */ - ox820_set_fiq_regs(1); - - /* - * let the primary processor know we're out of the - * pen, then head off into the C entry point - */ - write_pen_release(-1); - - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); -} - -int ox820_boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - unsigned long timeout; - - /* - * Set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); - - /* - * This is really belt and braces; we hold unintended secondary - * CPUs in the holding pen until we're ready for them. However, - * since we haven't sent them a soft interrupt, they shouldn't - * be there. - */ - write_pen_release(cpu); - - writel(1, IOMEM(OXNAS_GICN_BASE_VA(cpu) + GIC_CPU_CTRL)); - - /* - * Send the secondary CPU a soft interrupt, thereby causing - * the boot monitor to read the system wide flags register, - * and branch to the address found there. - */ - - arch_send_wakeup_ipi_mask(cpumask_of(cpu)); - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - smp_rmb(); - if (read_pen_release() == -1) - break; - - udelay(10); - } - - /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - spin_unlock(&boot_lock); - - return read_pen_release() != -1 ? -ENOSYS : 0; -} - -void *scu_base_addr(void) -{ - return IOMEM(OXNAS_SCU_BASE_VA); -} - -/* - * Initialise the CPU possible map early - this describes the CPUs - * which may be present or become present in the system. - */ -static void __init ox820_smp_init_cpus(void) -{ - void __iomem *scu_base = scu_base_addr(); - unsigned int i, ncores; - - ncores = scu_base ? scu_get_core_count(scu_base) : 1; - - /* sanity check */ - if (ncores > nr_cpu_ids) { - pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", - ncores, nr_cpu_ids); - ncores = nr_cpu_ids; - } - - for (i = 0; i < ncores; i++) - set_cpu_possible(i, true); -} - -static void __init ox820_smp_prepare_cpus(unsigned int max_cpus) -{ - - scu_enable(scu_base_addr()); - - /* - * Write the address of secondary startup into the - * system-wide flags register. The BootMonitor waits - * until it receives a soft interrupt, and then the - * secondary CPU branches to this address. - */ - writel(virt_to_phys(ox820_secondary_startup), - HOLDINGPEN_LOCATION); - ox820_init_fiq(); - - ox820_set_fiq_regs(0); -} - -struct smp_operations ox820_smp_ops __initdata = { - .smp_init_cpus = ox820_smp_init_cpus, - .smp_prepare_cpus = ox820_smp_prepare_cpus, - .smp_secondary_init = ox820_secondary_init, - .smp_boot_secondary = ox820_boot_secondary, -#ifdef CONFIG_HOTPLUG_CPU - .cpu_die = ox820_cpu_die, -#endif -}; diff --git a/target/linux/oxnas/files/drivers/ata/sata_oxnas.c b/target/linux/oxnas/files/drivers/ata/sata_oxnas.c index 291a06f959..64afa728a1 100644 --- a/target/linux/oxnas/files/drivers/ata/sata_oxnas.c +++ b/target/linux/oxnas/files/drivers/ata/sata_oxnas.c @@ -29,7 +29,35 @@ #include #include -#include +#include +#include + +static inline void oxnas_register_clear_mask(void __iomem *p, unsigned mask) +{ + u32 val = readl_relaxed(p); + + val &= ~mask; + writel_relaxed(val, p); +} + +static inline void oxnas_register_set_mask(void __iomem *p, unsigned mask) +{ + u32 val = readl_relaxed(p); + + val |= mask; + writel_relaxed(val, p); +} + +static inline void oxnas_register_value_mask(void __iomem *p, + unsigned mask, unsigned new_value) +{ + /* TODO sanity check mask & new_value = new_value */ + u32 val = readl_relaxed(p); + + val &= ~mask; + val |= new_value; + writel_relaxed(val, p); +} /* sgdma request structure */ struct sgdma_request { @@ -848,7 +876,7 @@ wait_for_lock: * list so want to give reentrant accessors a chance to get * access ASAP */ - if (!list_empty(&hd->scsi_wait_queue.task_list)) + if (!list_empty(&hd->scsi_wait_queue.head)) wake_up(&hd->scsi_wait_queue); } @@ -867,7 +895,7 @@ int sata_core_has_fast_waiters(struct ata_host *ah) struct sata_oxnas_host_priv *hd = ah->private_data; spin_lock_irqsave(&hd->core_lock, flags); - has_waiters = !list_empty(&hd->fast_wait_queue.task_list); + has_waiters = !list_empty(&hd->fast_wait_queue.head); spin_unlock_irqrestore(&hd->core_lock, flags); return has_waiters; @@ -882,7 +910,7 @@ int sata_core_has_scsi_waiters(struct ata_host *ah) spin_lock_irqsave(&hd->core_lock, flags); has_waiters = hd->scsi_nonblocking_attempts || - !list_empty(&hd->scsi_wait_queue.task_list); + !list_empty(&hd->scsi_wait_queue.head); spin_unlock_irqrestore(&hd->core_lock, flags); return has_waiters; @@ -954,7 +982,7 @@ static void sata_oxnas_release_hw(struct ata_port *ap) hd->locker_uid = 0; hd->core_locked = 0; released = 1; - wake_up(!list_empty(&hd->scsi_wait_queue.task_list) ? + wake_up(!list_empty(&hd->scsi_wait_queue.head) ? &hd->scsi_wait_queue : &hd->fast_wait_queue); } diff --git a/target/linux/oxnas/files/drivers/clk/clk-oxnas.c b/target/linux/oxnas/files/drivers/clk/clk-oxnas.c deleted file mode 100644 index 4dc6c44992..0000000000 --- a/target/linux/oxnas/files/drivers/clk/clk-oxnas.c +++ /dev/null @@ -1,297 +0,0 @@ -/* - * Copyright (C) 2010 Broadcom - * Copyright (C) 2012 Stephen Warren - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define MHZ (1000 * 1000) - -struct clk_oxnas_pllb { - struct clk_hw hw; - struct device_node *devnode; - struct reset_control *rstc; -}; - -#define to_clk_oxnas_pllb(_hw) container_of(_hw, struct clk_oxnas_pllb, hw) - -static unsigned long plla_clk_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - unsigned long fin = parent_rate; - unsigned long pll0; - unsigned long fbdiv, refdiv, outdiv; - - pll0 = readl_relaxed(SYS_CTRL_PLLA_CTRL0); - refdiv = (pll0 >> PLLA_REFDIV_SHIFT) & PLLA_REFDIV_MASK; - refdiv += 1; - outdiv = (pll0 >> PLLA_OUTDIV_SHIFT) & PLLA_OUTDIV_MASK; - outdiv += 1; - fbdiv = readl_relaxed(SYS_CTRL_PLLA_CTRL1); - - /* seems we will not be here when pll is bypassed, so ignore this - * case */ - - return fin / MHZ * fbdiv / (refdiv * outdiv) / 32768 * MHZ; -} - -static const char *pll_clk_parents[] = { - "oscillator", -}; - -static struct clk_ops plla_ops = { - .recalc_rate = plla_clk_recalc_rate, -}; - -static struct clk_init_data clk_plla_init = { - .name = "plla", - .ops = &plla_ops, - .parent_names = pll_clk_parents, - .num_parents = ARRAY_SIZE(pll_clk_parents), -}; - -static struct clk_hw plla_hw = { - .init = &clk_plla_init, -}; - -static int pllb_clk_is_prepared(struct clk_hw *hw) -{ - struct clk_oxnas_pllb *pllb = to_clk_oxnas_pllb(hw); - - return !!pllb->rstc; -} - -static int pllb_clk_prepare(struct clk_hw *hw) -{ - struct clk_oxnas_pllb *pllb = to_clk_oxnas_pllb(hw); - - pllb->rstc = of_reset_control_get(pllb->devnode, NULL); - - return IS_ERR(pllb->rstc) ? PTR_ERR(pllb->rstc) : 0; -} - -static void pllb_clk_unprepare(struct clk_hw *hw) -{ - struct clk_oxnas_pllb *pllb = to_clk_oxnas_pllb(hw); - - BUG_ON(IS_ERR(pllb->rstc)); - - reset_control_put(pllb->rstc); - pllb->rstc = NULL; -} - -static int pllb_clk_enable(struct clk_hw *hw) -{ - struct clk_oxnas_pllb *pllb = to_clk_oxnas_pllb(hw); - - BUG_ON(IS_ERR(pllb->rstc)); - - /* put PLL into bypass */ - oxnas_register_set_mask(SEC_CTRL_PLLB_CTRL0, BIT(PLLB_BYPASS)); - wmb(); - udelay(10); - reset_control_assert(pllb->rstc); - udelay(10); - /* set PLL B control information */ - writel((1 << PLLB_ENSAT) | (1 << PLLB_OUTDIV) | (2 << PLLB_REFDIV), - SEC_CTRL_PLLB_CTRL0); - reset_control_deassert(pllb->rstc); - udelay(100); - oxnas_register_clear_mask(SEC_CTRL_PLLB_CTRL0, BIT(PLLB_BYPASS)); - - return 0; -} - -static void pllb_clk_disable(struct clk_hw *hw) -{ - struct clk_oxnas_pllb *pllb = to_clk_oxnas_pllb(hw); - - BUG_ON(IS_ERR(pllb->rstc)); - - /* put PLL into bypass */ - oxnas_register_set_mask(SEC_CTRL_PLLB_CTRL0, BIT(PLLB_BYPASS)); - wmb(); - udelay(10); - - reset_control_assert(pllb->rstc); -} - -static struct clk_ops pllb_ops = { - .prepare = pllb_clk_prepare, - .unprepare = pllb_clk_unprepare, - .is_prepared = pllb_clk_is_prepared, - .enable = pllb_clk_enable, - .disable = pllb_clk_disable, -}; - -static struct clk_init_data clk_pllb_init = { - .name = "pllb", - .ops = &pllb_ops, - .parent_names = pll_clk_parents, - .num_parents = ARRAY_SIZE(pll_clk_parents), -}; - - -/* standard gate clock */ -struct clk_std { - struct clk_hw hw; - signed char bit; -}; - -#define NUM_STD_CLKS 17 -#define to_stdclk(_hw) container_of(_hw, struct clk_std, hw) - -static int std_clk_is_enabled(struct clk_hw *hw) -{ - struct clk_std *std = to_stdclk(hw); - - return readl_relaxed(SYSCTRL_CLK_STAT) & BIT(std->bit); -} - -static int std_clk_enable(struct clk_hw *hw) -{ - struct clk_std *std = to_stdclk(hw); - - writel(BIT(std->bit), SYS_CTRL_CLK_SET_CTRL); - return 0; -} - -static void std_clk_disable(struct clk_hw *hw) -{ - struct clk_std *std = to_stdclk(hw); - - writel(BIT(std->bit), SYS_CTRL_CLK_CLR_CTRL); -} - -static struct clk_ops std_clk_ops = { - .enable = std_clk_enable, - .disable = std_clk_disable, - .is_enabled = std_clk_is_enabled, -}; - -static const char *std_clk_parents[] = { - "oscillator", -}; - -static const char *eth_parents[] = { - "gmacclk", -}; - -#define DECLARE_STD_CLKP(__clk, __bit, __parent) \ -static struct clk_init_data clk_##__clk##_init = { \ - .name = __stringify(__clk), \ - .ops = &std_clk_ops, \ - .parent_names = __parent, \ - .num_parents = ARRAY_SIZE(__parent), \ -}; \ - \ -static struct clk_std clk_##__clk = { \ - .bit = __bit, \ - .hw = { \ - .init = &clk_##__clk##_init, \ - }, \ -} - -#define DECLARE_STD_CLK(__clk, __bit) DECLARE_STD_CLKP(__clk, __bit, \ - std_clk_parents) - -DECLARE_STD_CLK(leon, 0); -DECLARE_STD_CLK(dma_sgdma, 1); -DECLARE_STD_CLK(cipher, 2); -DECLARE_STD_CLK(sd, 3); -DECLARE_STD_CLK(sata, 4); -DECLARE_STD_CLK(audio, 5); -DECLARE_STD_CLK(usbmph, 6); -DECLARE_STD_CLKP(etha, 7, eth_parents); -DECLARE_STD_CLK(pciea, 8); -DECLARE_STD_CLK(static, 9); -DECLARE_STD_CLK(ethb, 10); -DECLARE_STD_CLK(pcieb, 11); -DECLARE_STD_CLK(ref600, 12); -DECLARE_STD_CLK(usbdev, 13); - -struct clk_hw *std_clk_hw_tbl[] = { - &clk_leon.hw, - &clk_dma_sgdma.hw, - &clk_cipher.hw, - &clk_sd.hw, - &clk_sata.hw, - &clk_audio.hw, - &clk_usbmph.hw, - &clk_etha.hw, - &clk_pciea.hw, - &clk_static.hw, - &clk_ethb.hw, - &clk_pcieb.hw, - &clk_ref600.hw, - &clk_usbdev.hw, -}; - -struct clk *std_clk_tbl[ARRAY_SIZE(std_clk_hw_tbl)]; - -static struct clk_onecell_data std_clk_data; - -void __init oxnas_init_stdclk(struct device_node *np) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(std_clk_hw_tbl); i++) { - std_clk_tbl[i] = clk_register(NULL, std_clk_hw_tbl[i]); - BUG_ON(IS_ERR(std_clk_tbl[i])); - } - std_clk_data.clks = std_clk_tbl; - std_clk_data.clk_num = ARRAY_SIZE(std_clk_tbl); - of_clk_add_provider(np, of_clk_src_onecell_get, &std_clk_data); -} -CLK_OF_DECLARE(oxnas_pllstd, "plxtech,nas782x-stdclk", oxnas_init_stdclk); - -void __init oxnas_init_plla(struct device_node *np) -{ - struct clk *clk; - - clk = clk_register(NULL, &plla_hw); - BUG_ON(IS_ERR(clk)); - /* mark it as enabled */ - clk_prepare_enable(clk); - of_clk_add_provider(np, of_clk_src_simple_get, clk); -} -CLK_OF_DECLARE(oxnas_plla, "plxtech,nas782x-plla", oxnas_init_plla); - -void __init oxnas_init_pllb(struct device_node *np) -{ - struct clk *clk; - struct clk_oxnas_pllb *pllb; - - pllb = kmalloc(sizeof(*pllb), GFP_KERNEL); - BUG_ON(!pllb); - - pllb->hw.init = &clk_pllb_init; - pllb->devnode = np; - pllb->rstc = NULL; - - clk = clk_register(NULL, &pllb->hw); - BUG_ON(IS_ERR(clk)); - of_clk_add_provider(np, of_clk_src_simple_get, clk); -} -CLK_OF_DECLARE(oxnas_pllb, "plxtech,nas782x-pllb", oxnas_init_pllb); diff --git a/target/linux/oxnas/files/drivers/clocksource/oxnas_rps_timer.c b/target/linux/oxnas/files/drivers/clocksource/oxnas_rps_timer.c deleted file mode 100644 index 7c8c4cf435..0000000000 --- a/target/linux/oxnas/files/drivers/clocksource/oxnas_rps_timer.c +++ /dev/null @@ -1,96 +0,0 @@ -/* - * arch/arm/mach-ox820/rps-time.c - * - * Copyright (C) 2009 Oxford Semiconductor Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -enum { - TIMER_LOAD = 0, - TIMER_CURR = 4, - TIMER_CTRL = 8, - TIMER_CLRINT = 0xC, - - TIMER_BITS = 24, - - TIMER_MAX_VAL = (1 << TIMER_BITS) - 1, - - TIMER_PERIODIC = (1 << 6), - TIMER_ENABLE = (1 << 7), - - TIMER_DIV1 = (0 << 2), - TIMER_DIV16 = (1 << 2), - TIMER_DIV256 = (2 << 2), - - TIMER1_OFFSET = 0, - TIMER2_OFFSET = 0x20, - -}; - -static u64 notrace rps_read_sched_clock(void) -{ - return ~readl_relaxed(RPSA_TIMER2_VAL); -} - -static void __init rps_clocksource_init(void __iomem *base, ulong ref_rate) -{ - int ret; - ulong clock_rate; - /* use prescale 16 */ - clock_rate = ref_rate / 16; - - iowrite32(TIMER_MAX_VAL, base + TIMER_LOAD); - iowrite32(TIMER_PERIODIC | TIMER_ENABLE | TIMER_DIV16, - base + TIMER_CTRL); - - ret = clocksource_mmio_init(base + TIMER_CURR, "rps_clocksource_timer", - clock_rate, 250, TIMER_BITS, - clocksource_mmio_readl_down); - if (ret) - panic("can't register clocksource\n"); - - sched_clock_register(rps_read_sched_clock, TIMER_BITS, clock_rate); -} - -static void __init rps_timer_init(struct device_node *np) -{ - struct clk *refclk; - unsigned long ref_rate; - void __iomem *base; - - refclk = of_clk_get(np, 0); - - if (IS_ERR(refclk) || clk_prepare_enable(refclk)) - panic("rps_timer_init: failed to get refclk\n"); - ref_rate = clk_get_rate(refclk); - - base = of_iomap(np, 0); - if (!base) - panic("rps_timer_init: failed to map io\n"); - - rps_clocksource_init(base + TIMER2_OFFSET, ref_rate); -} - -CLOCKSOURCE_OF_DECLARE(nas782x, "plxtech,nas782x-rps-timer", rps_timer_init); diff --git a/target/linux/oxnas/files/drivers/irqchip/irq-rps.c b/target/linux/oxnas/files/drivers/irqchip/irq-rps.c deleted file mode 100644 index f2b0829de6..0000000000 --- a/target/linux/oxnas/files/drivers/irqchip/irq-rps.c +++ /dev/null @@ -1,145 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -struct rps_chip_data { - void __iomem *base; - struct irq_chip chip; - struct irq_domain *domain; -} rps_data; - -enum { - RPS_IRQ_BASE = 64, - RPS_IRQ_COUNT = 32, - PRS_HWIRQ_BASE = 0, - - RPS_STATUS = 0, - RPS_RAW_STATUS = 4, - RPS_UNMASK = 8, - RPS_MASK = 0xc, -}; - -/* - * Routines to acknowledge, disable and enable interrupts - */ -static void rps_mask_irq(struct irq_data *d) -{ - struct rps_chip_data *chip_data = irq_data_get_irq_chip_data(d); - u32 mask = BIT(d->hwirq); - - iowrite32(mask, chip_data->base + RPS_MASK); -} - -static void rps_unmask_irq(struct irq_data *d) -{ - struct rps_chip_data *chip_data = irq_data_get_irq_chip_data(d); - u32 mask = BIT(d->hwirq); - - iowrite32(mask, chip_data->base + RPS_UNMASK); -} - -static struct irq_chip rps_chip = { - .name = "RPS", - .irq_mask = rps_mask_irq, - .irq_unmask = rps_unmask_irq, -}; - -static int rps_irq_domain_xlate(struct irq_domain *d, - struct device_node *controller, - const u32 *intspec, unsigned int intsize, - unsigned long *out_hwirq, - unsigned int *out_type) -{ - if (irq_domain_get_of_node(d) != controller) - return -EINVAL; - if (intsize < 1) - return -EINVAL; - - *out_hwirq = intspec[0]; - /* Honestly I do not know the type */ - *out_type = IRQ_TYPE_LEVEL_HIGH; - - return 0; -} - -static int rps_irq_domain_map(struct irq_domain *d, unsigned int irq, - irq_hw_number_t hw) -{ - irq_set_chip_and_handler(irq, &rps_chip, handle_level_irq); - irq_set_probe(irq); - irq_set_chip_data(irq, d->host_data); - return 0; -} - -const struct irq_domain_ops rps_irq_domain_ops = { - .map = rps_irq_domain_map, - .xlate = rps_irq_domain_xlate, -}; - -static void rps_handle_cascade_irq(struct irq_desc *desc) -{ - struct rps_chip_data *chip_data = irq_desc_get_handler_data(desc); - struct irq_chip *chip = irq_desc_get_chip(desc); - unsigned int cascade_irq, rps_irq; - u32 status; - - chained_irq_enter(chip, desc); - - status = ioread32(chip_data->base + RPS_STATUS); - rps_irq = __ffs(status); - cascade_irq = irq_find_mapping(chip_data->domain, rps_irq); - - if (unlikely(rps_irq >= RPS_IRQ_COUNT)) - handle_bad_irq(desc); - else - generic_handle_irq(cascade_irq); - - chained_irq_exit(chip, desc); -} - -#ifdef CONFIG_OF -int __init rps_of_init(struct device_node *node, struct device_node *parent) -{ - void __iomem *rps_base; - int irq_start = RPS_IRQ_BASE; - int irq_base; - int irq; - - if (WARN_ON(!node)) - return -ENODEV; - - rps_base = of_iomap(node, 0); - WARN(!rps_base, "unable to map rps registers\n"); - rps_data.base = rps_base; - - irq_base = irq_alloc_descs(irq_start, 0, RPS_IRQ_COUNT, numa_node_id()); - if (IS_ERR_VALUE(irq_base)) { - WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n", - irq_start); - irq_base = irq_start; - } - - rps_data.domain = irq_domain_add_legacy(node, RPS_IRQ_COUNT, irq_base, - PRS_HWIRQ_BASE, &rps_irq_domain_ops, &rps_data); - - if (WARN_ON(!rps_data.domain)) - return -ENOMEM; - - if (parent) { - irq = irq_of_parse_and_map(node, 0); - if (irq_set_handler_data(irq, &rps_data) != 0) - BUG(); - irq_set_chained_handler(irq, rps_handle_cascade_irq); - } - return 0; - -} - -IRQCHIP_DECLARE(nas782x, "plxtech,nas782x-rps", rps_of_init); -#endif diff --git a/target/linux/oxnas/files/drivers/mtd/nand/oxnas_nand.c b/target/linux/oxnas/files/drivers/mtd/nand/oxnas_nand.c deleted file mode 100644 index 36807b7767..0000000000 --- a/target/linux/oxnas/files/drivers/mtd/nand/oxnas_nand.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * Oxford Semiconductor OXNAS NAND driver - - * Copyright (C) 2016 Neil Armstrong - * Heavily based on plat_nand.c : - * Author: Vitaly Wool - * Copyright (C) 2013 Ma Haijun - * Copyright (C) 2012 John Crispin - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* Nand commands */ -#define OXNAS_NAND_CMD_ALE BIT(18) -#define OXNAS_NAND_CMD_CLE BIT(19) - -#define OXNAS_NAND_MAX_CHIPS 1 - -struct oxnas_nand { - struct nand_hw_control base; - void __iomem *io_base; - struct clk *clk; - struct nand_chip *chips[OXNAS_NAND_MAX_CHIPS]; - unsigned long ctrl; - struct mtd_partition *partitions; - int nr_partitions; -}; - -static uint8_t oxnas_nand_read_byte(struct mtd_info *mtd) -{ - struct nand_chip *chip = mtd_to_nand(mtd); - struct oxnas_nand *oxnas = nand_get_controller_data(chip); - - return readb(oxnas->io_base); -} - -static void oxnas_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) -{ - struct nand_chip *chip = mtd_to_nand(mtd); - struct oxnas_nand *oxnas = nand_get_controller_data(chip); - - ioread8_rep(oxnas->io_base, buf, len); -} - -static void oxnas_nand_write_buf(struct mtd_info *mtd, - const uint8_t *buf, int len) -{ - struct nand_chip *chip = mtd_to_nand(mtd); - struct oxnas_nand *oxnas = nand_get_controller_data(chip); - - iowrite8_rep(oxnas->io_base + oxnas->ctrl, buf, len); -} - -/* Single CS command control */ -static void oxnas_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, - unsigned int ctrl) -{ - struct nand_chip *chip = mtd_to_nand(mtd); - struct oxnas_nand *oxnas = nand_get_controller_data(chip); - - if (ctrl & NAND_CTRL_CHANGE) { - if (ctrl & NAND_CLE) - oxnas->ctrl = OXNAS_NAND_CMD_CLE; - else if (ctrl & NAND_ALE) - oxnas->ctrl = OXNAS_NAND_CMD_ALE; - else - oxnas->ctrl = 0; - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, oxnas->io_base + oxnas->ctrl); -} - -/* - * Probe for the NAND device. - */ -static int oxnas_nand_probe(struct platform_device *pdev) -{ - struct device_node *np = pdev->dev.of_node; - struct device_node *nand_np; - struct oxnas_nand *oxnas; - struct nand_chip *chip; - struct mtd_info *mtd; - struct resource *res; - int nchips = 0; - int count = 0; - int err = 0; - - /* Allocate memory for the device structure (and zero it) */ - oxnas = devm_kzalloc(&pdev->dev, sizeof(struct nand_chip), - GFP_KERNEL); - if (!oxnas) - return -ENOMEM; - - nand_hw_control_init(&oxnas->base); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - oxnas->io_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(oxnas->io_base)) - return PTR_ERR(oxnas->io_base); - - oxnas->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(oxnas->clk)) - oxnas->clk = NULL; - - /* Only a single chip node is supported */ - count = of_get_child_count(np); - if (count > 1) - return -EINVAL; - - clk_prepare_enable(oxnas->clk); - device_reset_optional(&pdev->dev); - - for_each_child_of_node(np, nand_np) { - chip = devm_kzalloc(&pdev->dev, sizeof(struct nand_chip), - GFP_KERNEL); - if (!chip) - return -ENOMEM; - - chip->controller = &oxnas->base; - - nand_set_flash_node(chip, nand_np); - nand_set_controller_data(chip, oxnas); - - mtd = nand_to_mtd(chip); - mtd->dev.parent = &pdev->dev; - mtd->priv = chip; - - chip->cmd_ctrl = oxnas_nand_cmd_ctrl; - chip->read_buf = oxnas_nand_read_buf; - chip->read_byte = oxnas_nand_read_byte; - chip->write_buf = oxnas_nand_write_buf; - chip->chip_delay = 30; - - /* Scan to find existence of the device */ - err = nand_scan(mtd, 1); - if (err) - return err; - - err = mtd_device_register(mtd, NULL, 0); - if (err) { - nand_release(mtd); - return err; - } - - oxnas->chips[nchips] = chip; - ++nchips; - } - - /* Exit if no chips found */ - if (!nchips) - return -ENODEV; - - platform_set_drvdata(pdev, oxnas); - - return 0; -} - -static int oxnas_nand_remove(struct platform_device *pdev) -{ - struct oxnas_nand *oxnas = platform_get_drvdata(pdev); - - if (oxnas->chips[0]) - nand_release(nand_to_mtd(oxnas->chips[0])); - - clk_disable_unprepare(oxnas->clk); - - return 0; -} - -static const struct of_device_id oxnas_nand_match[] = { - { .compatible = "oxsemi,ox820-nand" }, - {}, -}; -MODULE_DEVICE_TABLE(of, oxnas_nand_match); - -static struct platform_driver oxnas_nand_driver = { - .probe = oxnas_nand_probe, - .remove = oxnas_nand_remove, - .driver = { - .name = "oxnas_nand", - .of_match_table = oxnas_nand_match, - }, -}; - -module_platform_driver(oxnas_nand_driver); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Neil Armstrong "); -MODULE_DESCRIPTION("Oxnas NAND driver"); -MODULE_ALIAS("platform:oxnas_nand"); diff --git a/target/linux/oxnas/files/drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c b/target/linux/oxnas/files/drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c deleted file mode 100644 index aafb118144..0000000000 --- a/target/linux/oxnas/files/drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c +++ /dev/null @@ -1,145 +0,0 @@ -/* Copyright OpenWrt.org (C) 2015. - * Copyright Altera Corporation (C) 2014. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - * Adopted from dwmac-socfpga.c - * Based on code found in mach-oxnas.c - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "stmmac.h" -#include "stmmac_platform.h" - -struct oxnas_gmac { - struct clk *clk; -}; - -static int oxnas_gmac_init(struct platform_device *pdev, void *priv) -{ - struct oxnas_gmac *bsp_priv = priv; - int ret = 0; - unsigned value; - - ret = device_reset(&pdev->dev); - if (ret) - return ret; - - if (IS_ERR(bsp_priv->clk)) - return PTR_ERR(bsp_priv->clk); - clk_prepare_enable(bsp_priv->clk); - - value = readl(SYS_CTRL_GMAC_CTRL); - - /* Enable GMII_GTXCLK to follow GMII_REFCLK, required for gigabit PHY */ - value |= BIT(SYS_CTRL_GMAC_CKEN_GTX); - /* Use simple mux for 25/125 Mhz clock switching */ - value |= BIT(SYS_CTRL_GMAC_SIMPLE_MUX); - /* set auto switch tx clock source */ - value |= BIT(SYS_CTRL_GMAC_AUTO_TX_SOURCE); - /* enable tx & rx vardelay */ - value |= BIT(SYS_CTRL_GMAC_CKEN_TX_OUT); - value |= BIT(SYS_CTRL_GMAC_CKEN_TXN_OUT); - value |= BIT(SYS_CTRL_GMAC_CKEN_TX_IN); - value |= BIT(SYS_CTRL_GMAC_CKEN_RX_OUT); - value |= BIT(SYS_CTRL_GMAC_CKEN_RXN_OUT); - value |= BIT(SYS_CTRL_GMAC_CKEN_RX_IN); - writel(value, SYS_CTRL_GMAC_CTRL); - - /* set tx & rx vardelay */ - value = 0; - value |= SYS_CTRL_GMAC_TX_VARDELAY(4); - value |= SYS_CTRL_GMAC_TXN_VARDELAY(2); - value |= SYS_CTRL_GMAC_RX_VARDELAY(10); - value |= SYS_CTRL_GMAC_RXN_VARDELAY(8); - writel(value, SYS_CTRL_GMAC_DELAY_CTRL); - - return 0; -} - -static void oxnas_gmac_exit(struct platform_device *pdev, void *priv) -{ - struct reset_control *rstc; - - clk_disable_unprepare(priv); - devm_clk_put(&pdev->dev, priv); - - rstc = reset_control_get(&pdev->dev, NULL); - if (!IS_ERR(rstc)) { - reset_control_assert(rstc); - reset_control_put(rstc); - } -} - -static int oxnas_gmac_probe(struct platform_device *pdev) -{ - struct plat_stmmacenet_data *plat_dat; - struct stmmac_resources stmmac_res; - int ret; - struct device *dev = &pdev->dev; - struct oxnas_gmac *bsp_priv; - - bsp_priv = devm_kzalloc(dev, sizeof(*bsp_priv), GFP_KERNEL); - if (!bsp_priv) - return -ENOMEM; - bsp_priv->clk = devm_clk_get(dev, "gmac"); - if (IS_ERR(bsp_priv->clk)) - return PTR_ERR(bsp_priv->clk); - - ret = stmmac_get_platform_resources(pdev, &stmmac_res); - if (ret) - return ret; - - plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); - if (IS_ERR(plat_dat)) - return PTR_ERR(plat_dat); - - plat_dat->bsp_priv = bsp_priv; - plat_dat->init = oxnas_gmac_init; - plat_dat->exit = oxnas_gmac_exit; - - ret = oxnas_gmac_init(pdev, bsp_priv); - if (ret) - return ret; - - return stmmac_dvr_probe(dev, plat_dat, &stmmac_res); -} - -static const struct of_device_id oxnas_gmac_match[] = { - { .compatible = "plxtech,nas782x-gmac" }, - { } -}; -MODULE_DEVICE_TABLE(of, oxnas_gmac_match); - -static struct platform_driver oxnas_gmac_driver = { - .probe = oxnas_gmac_probe, - .remove = stmmac_pltfr_remove, - .driver = { - .name = "oxnas-gmac", - .pm = &stmmac_pltfr_pm_ops, - .of_match_table = oxnas_gmac_match, - }, -}; -module_platform_driver(oxnas_gmac_driver); - -MODULE_LICENSE("GPL v2"); diff --git a/target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c b/target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c index 9e8d6d9f93..7cf3ad1670 100644 --- a/target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c +++ b/target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c @@ -22,9 +22,279 @@ #include #include #include -#include -#include -#include +#include +#include + +#define OXNAS_UART1_BASE 0x44200000 +#define OXNAS_UART1_SIZE SZ_32 +#define OXNAS_UART1_BASE_VA 0xF0000000 + +#define OXNAS_UART2_BASE 0x44300000 +#define OXNAS_UART2_SIZE SZ_32 + +#define OXNAS_PERCPU_BASE 0x47000000 +#define OXNAS_PERCPU_SIZE SZ_8K +#define OXNAS_PERCPU_BASE_VA 0xF0002000 + +#define OXNAS_SYSCRTL_BASE 0x44E00000 +#define OXNAS_SYSCRTL_SIZE SZ_4K +#define OXNAS_SYSCRTL_BASE_VA 0xF0004000 + +#define OXNAS_SECCRTL_BASE 0x44F00000 +#define OXNAS_SECCRTL_SIZE SZ_4K +#define OXNAS_SECCRTL_BASE_VA 0xF0005000 + +#define OXNAS_RPSA_BASE 0x44400000 +#define OXNAS_RPSA_SIZE SZ_4K +#define OXNAS_RPSA_BASE_VA 0xF0006000 + +#define OXNAS_RPSC_BASE 0x44500000 +#define OXNAS_RPSC_SIZE SZ_4K +#define OXNAS_RPSC_BASE_VA 0xF0007000 + + +/* + * Location of flags and vectors in SRAM for controlling the booting of the + * secondary ARM11 processors. + */ + +#define OXNAS_SCU_BASE_VA OXNAS_PERCPU_BASE_VA +#define OXNAS_GICN_BASE_VA(n) (OXNAS_PERCPU_BASE_VA + 0x200 + n*0x100) + +#define HOLDINGPEN_CPU IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc8) +#define HOLDINGPEN_LOCATION IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc4) + +/** + * System block reset and clock control + */ +#define SYS_CTRL_PCI_STAT IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x20) +#define SYSCTRL_CLK_STAT IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x24) +#define SYS_CTRL_CLK_SET_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x2C) +#define SYS_CTRL_CLK_CLR_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x30) +#define SYS_CTRL_RST_SET_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x34) +#define SYS_CTRL_RST_CLR_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x38) + +#define SYS_CTRL_PLLSYS_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x48) +#define SYS_CTRL_CLK_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x64) +#define SYS_CTRL_PLLSYS_KEY_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x6C) +#define SYS_CTRL_GMAC_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x78) +#define SYS_CTRL_GMAC_DELAY_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x100) + +/* Scratch registers */ +#define SYS_CTRL_SCRATCHWORD0 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc4) +#define SYS_CTRL_SCRATCHWORD1 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc8) +#define SYS_CTRL_SCRATCHWORD2 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xcc) +#define SYS_CTRL_SCRATCHWORD3 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xd0) + +#define SYS_CTRL_PLLA_CTRL0 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F0) +#define SYS_CTRL_PLLA_CTRL1 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F4) +#define SYS_CTRL_PLLA_CTRL2 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F8) +#define SYS_CTRL_PLLA_CTRL3 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1FC) + +#define SYS_CTRL_USBHSMPH_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x40) +#define SYS_CTRL_USBHSMPH_STAT IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x44) +#define SYS_CTRL_REF300_DIV IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xF8) +#define SYS_CTRL_USBHSPHY_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x84) +#define SYS_CTRL_USB_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x90) + +/* pcie */ +#define SYS_CTRL_HCSL_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x114) + +/* System control multi-function pin function selection */ +#define SYS_CTRL_SECONDARY_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x14) +#define SYS_CTRL_TERTIARY_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x8c) +#define SYS_CTRL_QUATERNARY_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x94) +#define SYS_CTRL_DEBUG_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x9c) +#define SYS_CTRL_ALTERNATIVE_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xa4) +#define SYS_CTRL_PULLUP_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xac) + +/* Secure control multi-function pin function selection */ +#define SEC_CTRL_SECONDARY_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x14) +#define SEC_CTRL_TERTIARY_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x8c) +#define SEC_CTRL_QUATERNARY_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x94) +#define SEC_CTRL_DEBUG_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x9c) +#define SEC_CTRL_ALTERNATIVE_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0xa4) +#define SEC_CTRL_PULLUP_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0xac) + +#define SEC_CTRL_COPRO_CTRL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x68) +#define SEC_CTRL_SECURE_CTRL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x98) +#define SEC_CTRL_LEON_DEBUG IOMEM(OXNAS_SECCRTL_BASE_VA + 0xF0) +#define SEC_CTRL_PLLB_DIV_CTRL IOMEM(OXNAS_SECCRTL_BASE_VA + 0xF8) +#define SEC_CTRL_PLLB_CTRL0 IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F0) +#define SEC_CTRL_PLLB_CTRL1 IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F4) +#define SEC_CTRL_PLLB_CTRL8 IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F4) + +#define RPSA_IRQ_SOFT IOMEM(OXNAS_RPSA_BASE_VA + 0x10) +#define RPSA_FIQ_ENABLE IOMEM(OXNAS_RPSA_BASE_VA + 0x108) +#define RPSA_FIQ_DISABLE IOMEM(OXNAS_RPSA_BASE_VA + 0x10C) +#define RPSA_FIQ_IRQ_TO_FIQ IOMEM(OXNAS_RPSA_BASE_VA + 0x1FC) + +#define RPSC_IRQ_SOFT IOMEM(OXNAS_RPSC_BASE_VA + 0x10) +#define RPSC_FIQ_ENABLE IOMEM(OXNAS_RPSC_BASE_VA + 0x108) +#define RPSC_FIQ_DISABLE IOMEM(OXNAS_RPSC_BASE_VA + 0x10C) +#define RPSC_FIQ_IRQ_TO_FIQ IOMEM(OXNAS_RPSC_BASE_VA + 0x1FC) + +#define RPSA_TIMER2_VAL IOMEM(OXNAS_RPSA_BASE_VA + 0x224) + +#define REF300_DIV_INT_SHIFT 8 +#define REF300_DIV_FRAC_SHIFT 0 +#define REF300_DIV_INT(val) ((val) << REF300_DIV_INT_SHIFT) +#define REF300_DIV_FRAC(val) ((val) << REF300_DIV_FRAC_SHIFT) + +#define USBHSPHY_SUSPENDM_MANUAL_ENABLE 16 +#define USBHSPHY_SUSPENDM_MANUAL_STATE 15 +#define USBHSPHY_ATE_ESET 14 +#define USBHSPHY_TEST_DIN 6 +#define USBHSPHY_TEST_ADD 2 +#define USBHSPHY_TEST_DOUT_SEL 1 +#define USBHSPHY_TEST_CLK 0 + +#define USB_CTRL_USBAPHY_CKSEL_SHIFT 5 +#define USB_CLK_XTAL0_XTAL1 (0 << USB_CTRL_USBAPHY_CKSEL_SHIFT) +#define USB_CLK_XTAL0 (1 << USB_CTRL_USBAPHY_CKSEL_SHIFT) +#define USB_CLK_INTERNAL (2 << USB_CTRL_USBAPHY_CKSEL_SHIFT) + +#define USBAMUX_DEVICE BIT(4) + +#define USBPHY_REFCLKDIV_SHIFT 2 +#define USB_PHY_REF_12MHZ (0 << USBPHY_REFCLKDIV_SHIFT) +#define USB_PHY_REF_24MHZ (1 << USBPHY_REFCLKDIV_SHIFT) +#define USB_PHY_REF_48MHZ (2 << USBPHY_REFCLKDIV_SHIFT) + +#define USB_CTRL_USB_CKO_SEL_BIT 0 + +#define USB_INT_CLK_XTAL 0 +#define USB_INT_CLK_REF300 2 +#define USB_INT_CLK_PLLB 3 + +#define SYS_CTRL_GMAC_CKEN_RX_IN 14 +#define SYS_CTRL_GMAC_CKEN_RXN_OUT 13 +#define SYS_CTRL_GMAC_CKEN_RX_OUT 12 +#define SYS_CTRL_GMAC_CKEN_TX_IN 10 +#define SYS_CTRL_GMAC_CKEN_TXN_OUT 9 +#define SYS_CTRL_GMAC_CKEN_TX_OUT 8 +#define SYS_CTRL_GMAC_RX_SOURCE 7 +#define SYS_CTRL_GMAC_TX_SOURCE 6 +#define SYS_CTRL_GMAC_LOW_TX_SOURCE 4 +#define SYS_CTRL_GMAC_AUTO_TX_SOURCE 3 +#define SYS_CTRL_GMAC_RGMII 2 +#define SYS_CTRL_GMAC_SIMPLE_MUX 1 +#define SYS_CTRL_GMAC_CKEN_GTX 0 +#define SYS_CTRL_GMAC_TX_VARDELAY_SHIFT 0 +#define SYS_CTRL_GMAC_TXN_VARDELAY_SHIFT 8 +#define SYS_CTRL_GMAC_RX_VARDELAY_SHIFT 16 +#define SYS_CTRL_GMAC_RXN_VARDELAY_SHIFT 24 +#define SYS_CTRL_GMAC_TX_VARDELAY(d) ((d)< - * - * Under GPLv2 only - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -/* Since we request GPIOs from ourself */ -#include -#include - -#include "core.h" - -#include - -#define MAX_NB_GPIO_PER_BANK 32 -#define MAX_GPIO_BANKS 2 - -struct oxnas_gpio_chip { - struct gpio_chip chip; - struct pinctrl_gpio_range range; - void __iomem *regbase; /* GPIOA/B virtual address */ - void __iomem *ctrlbase; /* SYS/SEC_CTRL virtual address */ - struct irq_domain *domain; /* associated irq domain */ - spinlock_t lock; -}; - -#define to_oxnas_gpio_chip(c) container_of(c, struct oxnas_gpio_chip, chip) - -static struct oxnas_gpio_chip *gpio_chips[MAX_GPIO_BANKS]; - -static int gpio_banks; - -#define PULL_UP (1 << 0) -#define PULL_DOWN (1 << 1) -#define DEBOUNCE (1 << 2) - -/** - * struct oxnas_pmx_func - describes pinmux functions - * @name: the name of this specific function - * @groups: corresponding pin groups - * @ngroups: the number of groups - */ -struct oxnas_pmx_func { - const char *name; - const char **groups; - unsigned ngroups; -}; - -enum oxnas_mux { - OXNAS_PINMUX_GPIO, - OXNAS_PINMUX_FUNC2, - OXNAS_PINMUX_FUNC3, - OXNAS_PINMUX_FUNC4, - OXNAS_PINMUX_DEBUG, - OXNAS_PINMUX_ALT, -}; - -enum { - INPUT_VALUE = 0, - OUTPUT_ENABLE = 4, - IRQ_PENDING = 0xC, - OUTPUT_VALUE = 0x10, - OUTPUT_SET = 0x14, - OUTPUT_CLEAR = 0x18, - OUTPUT_EN_SET = 0x1C, - OUTPUT_EN_CLEAR = 0x20, - DEBOUNCE_ENABLE = 0x24, - RE_IRQ_ENABLE = 0x28, /* rising edge */ - FE_IRQ_ENABLE = 0x2C, /* falling edge */ - RE_IRQ_PENDING = 0x30, /* rising edge */ - FE_IRQ_PENDING = 0x34, /* falling edge */ - CLOCK_DIV = 0x48, - PULL_ENABLE = 0x50, - PULL_SENSE = 0x54, /* 1 up, 0 down */ - - - DEBOUNCE_MASK = 0x3FFF0000, - /* put hw debounce and soft config at same bit position*/ - DEBOUNCE_SHIFT = 16 -}; - -enum { - PINMUX_SECONDARY_SEL = 0x14, - PINMUX_TERTIARY_SEL = 0x8c, - PINMUX_QUATERNARY_SEL = 0x94, - PINMUX_DEBUG_SEL = 0x9c, - PINMUX_ALTERNATIVE_SEL = 0xa4, - PINMUX_PULLUP_SEL = 0xac, -}; - -/** - * struct oxnas_pmx_pin - describes an pin mux - * @bank: the bank of the pin - * @pin: the pin number in the @bank - * @mux: the mux mode : gpio or periph_x of the pin i.e. alternate function. - * @conf: the configuration of the pin: PULL_UP, MULTIDRIVE etc... - */ -struct oxnas_pmx_pin { - uint32_t bank; - uint32_t pin; - enum oxnas_mux mux; - unsigned long conf; -}; - -/** - * struct oxnas_pin_group - describes an pin group - * @name: the name of this specific pin group - * @pins_conf: the mux mode for each pin in this group. The size of this - * array is the same as pins. - * @pins: an array of discrete physical pins used in this group, taken - * from the driver-local pin enumeration space - * @npins: the number of pins in this group array, i.e. the number of - * elements in .pins so we can iterate over that array - */ -struct oxnas_pin_group { - const char *name; - struct oxnas_pmx_pin *pins_conf; - unsigned int *pins; - unsigned npins; -}; - -struct oxnas_pinctrl { - struct device *dev; - struct pinctrl_dev *pctl; - - int nbanks; - - uint32_t *mux_mask; - int nmux; - - struct oxnas_pmx_func *functions; - int nfunctions; - - struct oxnas_pin_group *groups; - int ngroups; -}; - -static const inline struct oxnas_pin_group *oxnas_pinctrl_find_group_by_name( - const struct oxnas_pinctrl *info, - const char *name) -{ - const struct oxnas_pin_group *grp = NULL; - int i; - - for (i = 0; i < info->ngroups; i++) { - if (strcmp(info->groups[i].name, name)) - continue; - - grp = &info->groups[i]; - dev_dbg(info->dev, "%s: %d 0:%d\n", name, grp->npins, - grp->pins[0]); - break; - } - - return grp; -} - -static int oxnas_get_groups_count(struct pinctrl_dev *pctldev) -{ - struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); - - return info->ngroups; -} - -static const char *oxnas_get_group_name(struct pinctrl_dev *pctldev, - unsigned selector) -{ - struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); - - return info->groups[selector].name; -} - -static int oxnas_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector, - const unsigned **pins, - unsigned *npins) -{ - struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); - - if (selector >= info->ngroups) - return -EINVAL; - - *pins = info->groups[selector].pins; - *npins = info->groups[selector].npins; - - return 0; -} - -static void oxnas_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s, - unsigned offset) -{ - seq_printf(s, "%s", dev_name(pctldev->dev)); -} - -static int oxnas_dt_node_to_map(struct pinctrl_dev *pctldev, - struct device_node *np, - struct pinctrl_map **map, unsigned *num_maps) -{ - struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); - const struct oxnas_pin_group *grp; - struct pinctrl_map *new_map; - struct device_node *parent; - int map_num = 1; - int i; - - /* - * first find the group of this node and check if we need create - * config maps for pins - */ - grp = oxnas_pinctrl_find_group_by_name(info, np->name); - if (!grp) { - dev_err(info->dev, "unable to find group for node %s\n", - np->name); - return -EINVAL; - } - - map_num += grp->npins; - new_map = devm_kzalloc(pctldev->dev, sizeof(*new_map) * map_num, - GFP_KERNEL); - if (!new_map) - return -ENOMEM; - - *map = new_map; - *num_maps = map_num; - - /* create mux map */ - parent = of_get_parent(np); - if (!parent) { - devm_kfree(pctldev->dev, new_map); - return -EINVAL; - } - new_map[0].type = PIN_MAP_TYPE_MUX_GROUP; - new_map[0].data.mux.function = parent->name; - new_map[0].data.mux.group = np->name; - of_node_put(parent); - - /* create config map */ - new_map++; - for (i = 0; i < grp->npins; i++) { - new_map[i].type = PIN_MAP_TYPE_CONFIGS_PIN; - new_map[i].data.configs.group_or_pin = - pin_get_name(pctldev, grp->pins[i]); - new_map[i].data.configs.configs = &grp->pins_conf[i].conf; - new_map[i].data.configs.num_configs = 1; - } - - dev_dbg(pctldev->dev, "maps: function %s group %s num %d\n", - (*map)->data.mux.function, (*map)->data.mux.group, map_num); - - return 0; -} - -static void oxnas_dt_free_map(struct pinctrl_dev *pctldev, - struct pinctrl_map *map, unsigned num_maps) -{ -} - -static const struct pinctrl_ops oxnas_pctrl_ops = { - .get_groups_count = oxnas_get_groups_count, - .get_group_name = oxnas_get_group_name, - .get_group_pins = oxnas_get_group_pins, - .pin_dbg_show = oxnas_pin_dbg_show, - .dt_node_to_map = oxnas_dt_node_to_map, - .dt_free_map = oxnas_dt_free_map, -}; - -static void __iomem *pin_to_gpioctrl(struct oxnas_pinctrl *info, - unsigned int bank) -{ - return gpio_chips[bank]->regbase; -} - -static void __iomem *pin_to_muxctrl(struct oxnas_pinctrl *info, - unsigned int bank) -{ - return gpio_chips[bank]->ctrlbase; -} - - -static inline int pin_to_bank(unsigned pin) -{ - return pin / MAX_NB_GPIO_PER_BANK; -} - -static unsigned pin_to_mask(unsigned int pin) -{ - return 1 << pin; -} - -static void oxnas_mux_disable_interrupt(void __iomem *pio, unsigned mask) -{ - oxnas_register_clear_mask(pio + RE_IRQ_ENABLE, mask); - oxnas_register_clear_mask(pio + FE_IRQ_ENABLE, mask); -} - -static unsigned oxnas_mux_get_pullup(void __iomem *pio, unsigned pin) -{ - return (readl_relaxed(pio + PULL_ENABLE) & BIT(pin)) && - (readl_relaxed(pio + PULL_SENSE) & BIT(pin)); -} - -static void oxnas_mux_set_pullup(void __iomem *pio, unsigned mask, bool on) -{ - if (on) { - oxnas_register_set_mask(pio + PULL_SENSE, mask); - oxnas_register_set_mask(pio + PULL_ENABLE, mask); - } else { - oxnas_register_clear_mask(pio + PULL_ENABLE, mask); - } -} - -static bool oxnas_mux_get_pulldown(void __iomem *pio, unsigned pin) -{ - return (readl_relaxed(pio + PULL_ENABLE) & BIT(pin)) && - (!(readl_relaxed(pio + PULL_SENSE) & BIT(pin))); -} - -static void oxnas_mux_set_pulldown(void __iomem *pio, unsigned mask, bool on) -{ - if (on) { - oxnas_register_clear_mask(pio + PULL_SENSE, mask); - oxnas_register_set_mask(pio + PULL_ENABLE, mask); - } else { - oxnas_register_clear_mask(pio + PULL_ENABLE, mask); - }; -} - -/* unfortunately debounce control are shared */ -static bool oxnas_mux_get_debounce(void __iomem *pio, unsigned pin, u32 *div) -{ - *div = __raw_readl(pio + CLOCK_DIV) & DEBOUNCE_MASK; - return __raw_readl(pio + DEBOUNCE_ENABLE) & BIT(pin); -} - -static void oxnas_mux_set_debounce(void __iomem *pio, unsigned mask, - bool is_on, u32 div) -{ - if (is_on) { - oxnas_register_value_mask(pio + CLOCK_DIV, DEBOUNCE_MASK, div); - oxnas_register_set_mask(pio + DEBOUNCE_ENABLE, mask); - } else { - oxnas_register_clear_mask(pio + DEBOUNCE_ENABLE, mask); - } -} - - -static void oxnas_mux_set_func2(void __iomem *cio, unsigned mask) -{ -/* in fact, SECONDARY takes precedence, so clear others is not necessary */ - oxnas_register_set_mask(cio + PINMUX_SECONDARY_SEL, mask); - oxnas_register_clear_mask(cio + PINMUX_TERTIARY_SEL, mask); - oxnas_register_clear_mask(cio + PINMUX_QUATERNARY_SEL, mask); - oxnas_register_clear_mask(cio + PINMUX_DEBUG_SEL, mask); - oxnas_register_clear_mask(cio + PINMUX_ALTERNATIVE_SEL, mask); -} - -static void oxnas_mux_set_func3(void __iomem *cio, unsigned mask) -{ - oxnas_register_clear_mask(cio + PINMUX_SECONDARY_SEL, mask); - oxnas_register_set_mask(cio + PINMUX_TERTIARY_SEL, mask); - oxnas_register_clear_mask(cio + PINMUX_QUATERNARY_SEL, mask); - oxnas_register_clear_mask(cio + PINMUX_DEBUG_SEL, mask); - oxnas_register_clear_mask(cio + PINMUX_ALTERNATIVE_SEL, mask); -} - -static void oxnas_mux_set_func4(void __iomem *cio, unsigned mask) -{ - oxnas_register_clear_mask(cio + PINMUX_SECONDARY_SEL, mask); - oxnas_register_clear_mask(cio + PINMUX_TERTIARY_SEL, mask); - oxnas_register_set_mask(cio + PINMUX_QUATERNARY_SEL, mask); - oxnas_register_clear_mask(cio + PINMUX_DEBUG_SEL, mask); - oxnas_register_clear_mask(cio + PINMUX_ALTERNATIVE_SEL, mask); -} - -static void oxnas_mux_set_func_dbg(void __iomem *cio, unsigned mask) -{ - oxnas_register_clear_mask(cio + PINMUX_SECONDARY_SEL, mask); - oxnas_register_clear_mask(cio + PINMUX_TERTIARY_SEL, mask); - oxnas_register_clear_mask(cio + PINMUX_QUATERNARY_SEL, mask); - oxnas_register_set_mask(cio + PINMUX_DEBUG_SEL, mask); - oxnas_register_clear_mask(cio + PINMUX_ALTERNATIVE_SEL, mask); -} - -static void oxnas_mux_set_func_alt(void __iomem *cio, unsigned mask) -{ - oxnas_register_clear_mask(cio + PINMUX_SECONDARY_SEL, mask); - oxnas_register_clear_mask(cio + PINMUX_TERTIARY_SEL, mask); - oxnas_register_clear_mask(cio + PINMUX_QUATERNARY_SEL, mask); - oxnas_register_clear_mask(cio + PINMUX_DEBUG_SEL, mask); - oxnas_register_set_mask(cio + PINMUX_ALTERNATIVE_SEL, mask); -} - -static void oxnas_mux_set_gpio(void __iomem *cio, unsigned mask) -{ - oxnas_register_clear_mask(cio + PINMUX_SECONDARY_SEL, mask); - oxnas_register_clear_mask(cio + PINMUX_TERTIARY_SEL, mask); - oxnas_register_clear_mask(cio + PINMUX_QUATERNARY_SEL, mask); - oxnas_register_clear_mask(cio + PINMUX_DEBUG_SEL, mask); - oxnas_register_clear_mask(cio + PINMUX_ALTERNATIVE_SEL, mask); -} - -static enum oxnas_mux oxnas_mux_get_func(void __iomem *cio, unsigned mask) -{ - if (readl_relaxed(cio + PINMUX_SECONDARY_SEL) & mask) - return OXNAS_PINMUX_FUNC2; - if (readl_relaxed(cio + PINMUX_TERTIARY_SEL) & mask) - return OXNAS_PINMUX_FUNC3; - if (readl_relaxed(cio + PINMUX_QUATERNARY_SEL) & mask) - return OXNAS_PINMUX_FUNC4; - if (readl_relaxed(cio + PINMUX_DEBUG_SEL) & mask) - return OXNAS_PINMUX_DEBUG; - if (readl_relaxed(cio + PINMUX_ALTERNATIVE_SEL) & mask) - return OXNAS_PINMUX_ALT; - return OXNAS_PINMUX_GPIO; -} - - -static void oxnas_pin_dbg(const struct device *dev, - const struct oxnas_pmx_pin *pin) -{ - if (pin->mux) { - dev_dbg(dev, - "MF_%c%d configured as periph%c with conf = 0x%lu\n", - pin->bank + 'A', pin->pin, pin->mux - 1 + 'A', - pin->conf); - } else { - dev_dbg(dev, "MF_%c%d configured as gpio with conf = 0x%lu\n", - pin->bank + 'A', pin->pin, pin->conf); - } -} - -static int pin_check_config(struct oxnas_pinctrl *info, const char *name, - int index, const struct oxnas_pmx_pin *pin) -{ - int mux; - - /* check if it's a valid config */ - if (pin->bank >= info->nbanks) { - dev_err(info->dev, "%s: pin conf %d bank_id %d >= nbanks %d\n", - name, index, pin->bank, info->nbanks); - return -EINVAL; - } - - if (pin->pin >= MAX_NB_GPIO_PER_BANK) { - dev_err(info->dev, "%s: pin conf %d pin_bank_id %d >= %d\n", - name, index, pin->pin, MAX_NB_GPIO_PER_BANK); - return -EINVAL; - } - /* gpio always allowed */ - if (!pin->mux) - return 0; - - mux = pin->mux - 1; - - if (mux >= info->nmux) { - dev_err(info->dev, "%s: pin conf %d mux_id %d >= nmux %d\n", - name, index, mux, info->nmux); - return -EINVAL; - } - - if (!(info->mux_mask[pin->bank * info->nmux + mux] & 1 << pin->pin)) { - dev_err(info->dev, "%s: pin conf %d mux_id %d not supported for MF_%c%d\n", - name, index, mux, pin->bank + 'A', pin->pin); - return -EINVAL; - } - - return 0; -} - -static void oxnas_mux_gpio_enable(void __iomem *cio, void __iomem *pio, - unsigned mask, bool input) -{ - oxnas_mux_set_gpio(cio, mask); - if (input) - writel_relaxed(mask, pio + OUTPUT_EN_CLEAR); - else - writel_relaxed(mask, pio + OUTPUT_EN_SET); -} - -static void oxnas_mux_gpio_disable(void __iomem *cio, void __iomem *pio, - unsigned mask) -{ - /* when switch to other function, gpio is disabled automatically */ - return; -} - -static int oxnas_pmx_set_mux(struct pinctrl_dev *pctldev, unsigned selector, - unsigned group) -{ - struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); - const struct oxnas_pmx_pin *pins_conf = info->groups[group].pins_conf; - const struct oxnas_pmx_pin *pin; - uint32_t npins = info->groups[group].npins; - int i, ret; - unsigned mask; - void __iomem *pio; - void __iomem *cio; - - dev_dbg(info->dev, "enable function %s group %s\n", - info->functions[selector].name, info->groups[group].name); - - /* first check that all the pins of the group are valid with a valid - * paramter */ - for (i = 0; i < npins; i++) { - pin = &pins_conf[i]; - ret = pin_check_config(info, info->groups[group].name, i, pin); - if (ret) - return ret; - } - - for (i = 0; i < npins; i++) { - pin = &pins_conf[i]; - oxnas_pin_dbg(info->dev, pin); - - pio = pin_to_gpioctrl(info, pin->bank); - cio = pin_to_muxctrl(info, pin->bank); - - mask = pin_to_mask(pin->pin); - oxnas_mux_disable_interrupt(pio, mask); - - switch (pin->mux) { - case OXNAS_PINMUX_GPIO: - oxnas_mux_gpio_enable(cio, pio, mask, 1); - break; - case OXNAS_PINMUX_FUNC2: - oxnas_mux_set_func2(cio, mask); - break; - case OXNAS_PINMUX_FUNC3: - oxnas_mux_set_func3(cio, mask); - break; - case OXNAS_PINMUX_FUNC4: - oxnas_mux_set_func4(cio, mask); - break; - case OXNAS_PINMUX_DEBUG: - oxnas_mux_set_func_dbg(cio, mask); - break; - case OXNAS_PINMUX_ALT: - oxnas_mux_set_func_alt(cio, mask); - break; - } - if (pin->mux) - oxnas_mux_gpio_disable(cio, pio, mask); - } - - return 0; -} - -static int oxnas_pmx_get_funcs_count(struct pinctrl_dev *pctldev) -{ - struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); - - return info->nfunctions; -} - -static const char *oxnas_pmx_get_func_name(struct pinctrl_dev *pctldev, - unsigned selector) -{ - struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); - - return info->functions[selector].name; -} - -static int oxnas_pmx_get_groups(struct pinctrl_dev *pctldev, unsigned selector, - const char * const **groups, - unsigned * const num_groups) -{ - struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); - - *groups = info->functions[selector].groups; - *num_groups = info->functions[selector].ngroups; - - return 0; -} - -static int oxnas_gpio_request_enable(struct pinctrl_dev *pctldev, - struct pinctrl_gpio_range *range, - unsigned offset) -{ - struct oxnas_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); - struct oxnas_gpio_chip *oxnas_chip; - struct gpio_chip *chip; - unsigned mask; - - if (!range) { - dev_err(npct->dev, "invalid range\n"); - return -EINVAL; - } - if (!range->gc) { - dev_err(npct->dev, "missing GPIO chip in range\n"); - return -EINVAL; - } - chip = range->gc; - oxnas_chip = container_of(chip, struct oxnas_gpio_chip, chip); - - dev_dbg(npct->dev, "enable pin %u as GPIO\n", offset); - - mask = 1 << (offset - chip->base); - - dev_dbg(npct->dev, "enable pin %u as MF_%c%d 0x%x\n", - offset, 'A' + range->id, offset - chip->base, mask); - - oxnas_mux_set_gpio(oxnas_chip->ctrlbase, mask); - - return 0; -} - -static void oxnas_gpio_disable_free(struct pinctrl_dev *pctldev, - struct pinctrl_gpio_range *range, - unsigned offset) -{ - struct oxnas_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); - - dev_dbg(npct->dev, "disable pin %u as GPIO\n", offset); - /* Set the pin to some default state, GPIO is usually default */ -} - -static const struct pinmux_ops oxnas_pmx_ops = { - .get_functions_count = oxnas_pmx_get_funcs_count, - .get_function_name = oxnas_pmx_get_func_name, - .get_function_groups = oxnas_pmx_get_groups, - .set_mux = oxnas_pmx_set_mux, - .gpio_request_enable = oxnas_gpio_request_enable, - .gpio_disable_free = oxnas_gpio_disable_free, -}; - -static int oxnas_pinconf_get(struct pinctrl_dev *pctldev, - unsigned pin_id, unsigned long *config) -{ - struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); - void __iomem *pio; - unsigned pin; - int div; - - dev_dbg(info->dev, "%s:%d, pin_id=%d, config=0x%lx", __func__, - __LINE__, pin_id, *config); - pio = pin_to_gpioctrl(info, pin_to_bank(pin_id)); - pin = pin_id % MAX_NB_GPIO_PER_BANK; - - if (oxnas_mux_get_pullup(pio, pin)) - *config |= PULL_UP; - - if (oxnas_mux_get_pulldown(pio, pin)) - *config |= PULL_DOWN; - - if (oxnas_mux_get_debounce(pio, pin, &div)) - *config |= DEBOUNCE | div; - return 0; -} - -static int oxnas_pinconf_set(struct pinctrl_dev *pctldev, - unsigned pin_id, unsigned long *configs, - unsigned num_configs) -{ - struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); - unsigned mask; - void __iomem *pio; - int i; - unsigned long config; - - pio = pin_to_gpioctrl(info, pin_to_bank(pin_id)); - mask = pin_to_mask(pin_id % MAX_NB_GPIO_PER_BANK); - - for (i = 0; i < num_configs; i++) { - config = configs[i]; - - dev_dbg(info->dev, - "%s:%d, pin_id=%d, config=0x%lx", - __func__, __LINE__, pin_id, config); - - if ((config & PULL_UP) && (config & PULL_DOWN)) - return -EINVAL; - - oxnas_mux_set_pullup(pio, mask, config & PULL_UP); - oxnas_mux_set_pulldown(pio, mask, config & PULL_DOWN); - oxnas_mux_set_debounce(pio, mask, config & DEBOUNCE, - config & DEBOUNCE_MASK); - - } /* for each config */ - - return 0; -} - -static void oxnas_pinconf_dbg_show(struct pinctrl_dev *pctldev, - struct seq_file *s, unsigned pin_id) -{ - -} - -static void oxnas_pinconf_group_dbg_show(struct pinctrl_dev *pctldev, - struct seq_file *s, unsigned group) -{ -} - -static const struct pinconf_ops oxnas_pinconf_ops = { - .pin_config_get = oxnas_pinconf_get, - .pin_config_set = oxnas_pinconf_set, - .pin_config_dbg_show = oxnas_pinconf_dbg_show, - .pin_config_group_dbg_show = oxnas_pinconf_group_dbg_show, -}; - -static struct pinctrl_desc oxnas_pinctrl_desc = { - .pctlops = &oxnas_pctrl_ops, - .pmxops = &oxnas_pmx_ops, - .confops = &oxnas_pinconf_ops, - .owner = THIS_MODULE, -}; - -static const char *gpio_compat = "plxtech,nas782x-gpio"; - -static void oxnas_pinctrl_child_count(struct oxnas_pinctrl *info, - struct device_node *np) -{ - struct device_node *child; - - for_each_child_of_node(np, child) { - if (of_device_is_compatible(child, gpio_compat)) { - info->nbanks++; - } else { - info->nfunctions++; - info->ngroups += of_get_child_count(child); - } - } -} - -static int oxnas_pinctrl_mux_mask(struct oxnas_pinctrl *info, - struct device_node *np) -{ - int ret = 0; - int size; - const __be32 *list; - - list = of_get_property(np, "plxtech,mux-mask", &size); - if (!list) { - dev_err(info->dev, "can not read the mux-mask of %d\n", size); - return -EINVAL; - } - - size /= sizeof(*list); - if (!size || size % info->nbanks) { - dev_err(info->dev, "wrong mux mask array should be by %d\n", - info->nbanks); - return -EINVAL; - } - info->nmux = size / info->nbanks; - - info->mux_mask = devm_kzalloc(info->dev, sizeof(u32) * size, GFP_KERNEL); - if (!info->mux_mask) { - dev_err(info->dev, "could not alloc mux_mask\n"); - return -ENOMEM; - } - - ret = of_property_read_u32_array(np, "plxtech,mux-mask", - info->mux_mask, size); - if (ret) - dev_err(info->dev, "can not read the mux-mask of %d\n", size); - return ret; -} - -static int oxnas_pinctrl_parse_groups(struct device_node *np, - struct oxnas_pin_group *grp, - struct oxnas_pinctrl *info, u32 index) -{ - struct oxnas_pmx_pin *pin; - int size; - const __be32 *list; - int i, j; - - dev_dbg(info->dev, "group(%d): %s\n", index, np->name); - - /* Initialise group */ - grp->name = np->name; - - /* - * the binding format is plxtech,pins = , - * do sanity check and calculate pins number - */ - list = of_get_property(np, "plxtech,pins", &size); - /* we do not check return since it's safe node passed down */ - size /= sizeof(*list); - if (!size || size % 4) { - dev_err(info->dev, "wrong pins number or pins and configs" - " should be divisible by 4\n"); - return -EINVAL; - } - - grp->npins = size / 4; - pin = grp->pins_conf = devm_kzalloc(info->dev, - grp->npins * sizeof(struct oxnas_pmx_pin), - GFP_KERNEL); - grp->pins = devm_kzalloc(info->dev, grp->npins * sizeof(unsigned int), - GFP_KERNEL); - if (!grp->pins_conf || !grp->pins) - return -ENOMEM; - - for (i = 0, j = 0; i < size; i += 4, j++) { - pin->bank = be32_to_cpu(*list++); - pin->pin = be32_to_cpu(*list++); - grp->pins[j] = pin->bank * MAX_NB_GPIO_PER_BANK + pin->pin; - pin->mux = be32_to_cpu(*list++); - pin->conf = be32_to_cpu(*list++); - - oxnas_pin_dbg(info->dev, pin); - pin++; - } - - return 0; -} - -static int oxnas_pinctrl_parse_functions(struct device_node *np, - struct oxnas_pinctrl *info, u32 index) -{ - struct device_node *child; - struct oxnas_pmx_func *func; - struct oxnas_pin_group *grp; - int ret; - static u32 grp_index; - u32 i = 0; - - dev_dbg(info->dev, "parse function(%d): %s\n", index, np->name); - - func = &info->functions[index]; - - /* Initialise function */ - func->name = np->name; - func->ngroups = of_get_child_count(np); - if (func->ngroups <= 0) { - dev_err(info->dev, "no groups defined\n"); - return -EINVAL; - } - func->groups = devm_kzalloc(info->dev, - func->ngroups * sizeof(char *), GFP_KERNEL); - if (!func->groups) - return -ENOMEM; - - for_each_child_of_node(np, child) { - func->groups[i] = child->name; - grp = &info->groups[grp_index++]; - ret = oxnas_pinctrl_parse_groups(child, grp, info, i++); - if (ret) - return ret; - } - - return 0; -} - -static struct of_device_id oxnas_pinctrl_of_match[] = { - { .compatible = "plxtech,nas782x-pinctrl"}, - { /* sentinel */ } -}; - -static int oxnas_pinctrl_probe_dt(struct platform_device *pdev, - struct oxnas_pinctrl *info) -{ - int ret = 0; - int i, j; - uint32_t *tmp; - struct device_node *np = pdev->dev.of_node; - struct device_node *child; - - if (!np) - return -ENODEV; - - info->dev = &pdev->dev; - - oxnas_pinctrl_child_count(info, np); - - if (info->nbanks < 1) { - dev_err(&pdev->dev, "you need to specify atleast one gpio-controller\n"); - return -EINVAL; - } - - ret = oxnas_pinctrl_mux_mask(info, np); - if (ret) - return ret; - - dev_dbg(&pdev->dev, "nmux = %d\n", info->nmux); - - dev_dbg(&pdev->dev, "mux-mask\n"); - tmp = info->mux_mask; - for (i = 0; i < info->nbanks; i++) - for (j = 0; j < info->nmux; j++, tmp++) - dev_dbg(&pdev->dev, "%d:%d\t0x%x\n", i, j, tmp[0]); - - dev_dbg(&pdev->dev, "nfunctions = %d\n", info->nfunctions); - dev_dbg(&pdev->dev, "ngroups = %d\n", info->ngroups); - info->functions = devm_kzalloc(&pdev->dev, info->nfunctions * - sizeof(struct oxnas_pmx_func), - GFP_KERNEL); - if (!info->functions) - return -ENOMEM; - - info->groups = devm_kzalloc(&pdev->dev, info->ngroups * - sizeof(struct oxnas_pin_group), - GFP_KERNEL); - if (!info->groups) - return -ENOMEM; - - dev_dbg(&pdev->dev, "nbanks = %d\n", info->nbanks); - dev_dbg(&pdev->dev, "nfunctions = %d\n", info->nfunctions); - dev_dbg(&pdev->dev, "ngroups = %d\n", info->ngroups); - - i = 0; - - for_each_child_of_node(np, child) { - if (of_device_is_compatible(child, gpio_compat)) - continue; - ret = oxnas_pinctrl_parse_functions(child, info, i++); - if (ret) { - dev_err(&pdev->dev, "failed to parse function\n"); - return ret; - } - } - - return 0; -} - -static int oxnas_pinctrl_probe(struct platform_device *pdev) -{ - struct oxnas_pinctrl *info; - struct pinctrl_pin_desc *pdesc; - int ret, i, j, k; - - info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - ret = oxnas_pinctrl_probe_dt(pdev, info); - if (ret) - return ret; - - /* - * We need all the GPIO drivers to probe FIRST, or we will not be able - * to obtain references to the struct gpio_chip * for them, and we - * need this to proceed. - */ - for (i = 0; i < info->nbanks; i++) { - if (!gpio_chips[i]) { - dev_warn(&pdev->dev, - "GPIO chip %d not registered yet\n", i); - devm_kfree(&pdev->dev, info); - return -EPROBE_DEFER; - } - } - - oxnas_pinctrl_desc.name = dev_name(&pdev->dev); - oxnas_pinctrl_desc.npins = info->nbanks * MAX_NB_GPIO_PER_BANK; - oxnas_pinctrl_desc.pins = pdesc = - devm_kzalloc(&pdev->dev, sizeof(*pdesc) * - oxnas_pinctrl_desc.npins, GFP_KERNEL); - - if (!oxnas_pinctrl_desc.pins) - return -ENOMEM; - - for (i = 0 , k = 0; i < info->nbanks; i++) { - for (j = 0; j < MAX_NB_GPIO_PER_BANK; j++, k++) { - pdesc->number = k; - pdesc->name = kasprintf(GFP_KERNEL, "MF_%c%d", i + 'A', - j); - pdesc++; - } - } - - platform_set_drvdata(pdev, info); - info->pctl = pinctrl_register(&oxnas_pinctrl_desc, &pdev->dev, info); - - if (!info->pctl) { - dev_err(&pdev->dev, "could not register OX820 pinctrl driver\n"); - ret = -EINVAL; - goto err; - } - - /* We will handle a range of GPIO pins */ - for (i = 0; i < info->nbanks; i++) - pinctrl_add_gpio_range(info->pctl, &gpio_chips[i]->range); - - dev_info(&pdev->dev, "initialized OX820 pinctrl driver\n"); - - return 0; - -err: - return ret; -} - -static int oxnas_pinctrl_remove(struct platform_device *pdev) -{ - struct oxnas_pinctrl *info = platform_get_drvdata(pdev); - - pinctrl_unregister(info->pctl); - - return 0; -} - -static int oxnas_gpio_request(struct gpio_chip *chip, unsigned offset) -{ - /* - * Map back to global GPIO space and request muxing, the direction - * parameter does not matter for this controller. - */ - int gpio = chip->base + offset; - int bank = chip->base / chip->ngpio; - - dev_dbg(chip->dev, "%s:%d MF_%c%d(%d)\n", __func__, __LINE__, - 'A' + bank, offset, gpio); - - return pinctrl_request_gpio(gpio); -} - -static void oxnas_gpio_free(struct gpio_chip *chip, unsigned offset) -{ - int gpio = chip->base + offset; - - pinctrl_free_gpio(gpio); -} - -static int oxnas_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - struct oxnas_gpio_chip *oxnas_gpio = to_oxnas_gpio_chip(chip); - void __iomem *pio = oxnas_gpio->regbase; - - writel_relaxed(BIT(offset), pio + OUTPUT_EN_CLEAR); - return 0; -} - -static int oxnas_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct oxnas_gpio_chip *oxnas_gpio = to_oxnas_gpio_chip(chip); - void __iomem *pio = oxnas_gpio->regbase; - unsigned mask = 1 << offset; - u32 pdsr; - - pdsr = readl_relaxed(pio + INPUT_VALUE); - return (pdsr & mask) != 0; -} - -static void oxnas_gpio_set(struct gpio_chip *chip, unsigned offset, - int val) -{ - struct oxnas_gpio_chip *oxnas_gpio = to_oxnas_gpio_chip(chip); - void __iomem *pio = oxnas_gpio->regbase; - - if (val) - writel_relaxed(BIT(offset), pio + OUTPUT_SET); - else - writel_relaxed(BIT(offset), pio + OUTPUT_CLEAR); - -} - -static int oxnas_gpio_direction_output(struct gpio_chip *chip, unsigned offset, - int val) -{ - struct oxnas_gpio_chip *oxnas_gpio = to_oxnas_gpio_chip(chip); - void __iomem *pio = oxnas_gpio->regbase; - - if (val) - writel_relaxed(BIT(offset), pio + OUTPUT_SET); - else - writel_relaxed(BIT(offset), pio + OUTPUT_CLEAR); - - writel_relaxed(BIT(offset), pio + OUTPUT_EN_SET); - - return 0; -} - -static int oxnas_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -{ - struct oxnas_gpio_chip *oxnas_gpio = to_oxnas_gpio_chip(chip); - int virq; - - if (offset < chip->ngpio) - virq = irq_create_mapping(oxnas_gpio->domain, offset); - else - virq = -ENXIO; - - dev_dbg(chip->dev, "%s: request IRQ for GPIO %d, return %d\n", - chip->label, offset + chip->base, virq); - return virq; -} - -#ifdef CONFIG_DEBUG_FS -static void oxnas_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) -{ - enum oxnas_mux mode; - int i; - struct oxnas_gpio_chip *oxnas_gpio = to_oxnas_gpio_chip(chip); - void __iomem *pio = oxnas_gpio->regbase; - void __iomem *cio = oxnas_gpio->ctrlbase; - - for (i = 0; i < chip->ngpio; i++) { - unsigned pin = chip->base + i; - unsigned mask = pin_to_mask(pin); - const char *gpio_label; - u32 pdsr; - - gpio_label = gpiochip_is_requested(chip, i); - if (!gpio_label) - continue; - /* FIXME */ - mode = oxnas_mux_get_func(cio, mask); - seq_printf(s, "[%s] GPIO%s%d: ", - gpio_label, chip->label, i); - if (mode == OXNAS_PINMUX_GPIO) { - pdsr = readl_relaxed(pio + INPUT_VALUE); - - seq_printf(s, "[gpio] %s\n", - pdsr & mask ? - "set" : "clear"); - } else { - seq_printf(s, "[periph %c]\n", - mode + 'A' - 1); - } - } -} -#else -#define oxnas_gpio_dbg_show NULL -#endif - -/* Several AIC controller irqs are dispatched through this GPIO handler. - * To use any AT91_PIN_* as an externally triggered IRQ, first call - * oxnas_set_gpio_input() then maybe enable its glitch filter. - * Then just request_irq() with the pin ID; it works like any ARM IRQ - * handler. - */ - -static void gpio_irq_mask(struct irq_data *d) -{ - struct oxnas_gpio_chip *oxnas_gpio = irq_data_get_irq_chip_data(d); - void __iomem *pio = oxnas_gpio->regbase; - unsigned mask = 1 << d->hwirq; - unsigned type = irqd_get_trigger_type(d); - unsigned long flags; - - if (!(type & IRQ_TYPE_EDGE_BOTH)) - return; - - spin_lock_irqsave(&oxnas_gpio->lock, flags); - if (type & IRQ_TYPE_EDGE_RISING) - oxnas_register_clear_mask(pio + RE_IRQ_ENABLE, mask); - if (type & IRQ_TYPE_EDGE_FALLING) - oxnas_register_clear_mask(pio + FE_IRQ_ENABLE, mask); - spin_unlock_irqrestore(&oxnas_gpio->lock, flags); -} - -static void gpio_irq_unmask(struct irq_data *d) -{ - struct oxnas_gpio_chip *oxnas_gpio = irq_data_get_irq_chip_data(d); - void __iomem *pio = oxnas_gpio->regbase; - unsigned mask = 1 << d->hwirq; - unsigned type = irqd_get_trigger_type(d); - unsigned long flags; - - if (!(type & IRQ_TYPE_EDGE_BOTH)) - return; - - spin_lock_irqsave(&oxnas_gpio->lock, flags); - if (type & IRQ_TYPE_EDGE_RISING) - oxnas_register_set_mask(pio + RE_IRQ_ENABLE, mask); - if (type & IRQ_TYPE_EDGE_FALLING) - oxnas_register_set_mask(pio + FE_IRQ_ENABLE, mask); - spin_unlock_irqrestore(&oxnas_gpio->lock, flags); -} - - -static int gpio_irq_type(struct irq_data *d, unsigned type) -{ - if ((type & IRQ_TYPE_EDGE_BOTH) == 0) { - pr_warn("OX820: Unsupported type for irq %d\n", - gpio_to_irq(d->irq)); - return -EINVAL; - } - /* seems no way to set trigger type without enable irq, so leave it to unmask time */ - - return 0; -} - -static struct irq_chip gpio_irqchip = { - .name = "GPIO", - .irq_disable = gpio_irq_mask, - .irq_mask = gpio_irq_mask, - .irq_unmask = gpio_irq_unmask, - .irq_set_type = gpio_irq_type, -}; - -static void gpio_irq_handler(struct irq_desc *desc) -{ - struct irq_chip *chip = irq_desc_get_chip(desc); - struct irq_data *idata = irq_desc_get_irq_data(desc); - struct oxnas_gpio_chip *oxnas_gpio = irq_data_get_irq_chip_data(idata); - void __iomem *pio = oxnas_gpio->regbase; - unsigned long isr; - int n; - - chained_irq_enter(chip, desc); - for (;;) { - /* TODO: see if it works */ - isr = readl_relaxed(pio + IRQ_PENDING); - if (!isr) - break; - /* acks pending interrupts */ - writel_relaxed(isr, pio + IRQ_PENDING); - - for_each_set_bit(n, &isr, BITS_PER_LONG) { - generic_handle_irq(irq_find_mapping(oxnas_gpio->domain, - n)); - } - } - chained_irq_exit(chip, desc); - /* now it may re-trigger */ -} - -/* - * This lock class tells lockdep that GPIO irqs are in a different - * category than their parents, so it won't report false recursion. - */ -static struct lock_class_key gpio_lock_class; - -static int oxnas_gpio_irq_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - struct oxnas_gpio_chip *oxnas_gpio = h->host_data; - - irq_set_lockdep_class(virq, &gpio_lock_class); - - irq_set_chip_and_handler(virq, &gpio_irqchip, handle_edge_irq); - irq_set_chip_data(virq, oxnas_gpio); - - return 0; -} - -static int oxnas_gpio_irq_domain_xlate(struct irq_domain *d, - struct device_node *ctrlr, - const u32 *intspec, - unsigned int intsize, - irq_hw_number_t *out_hwirq, - unsigned int *out_type) -{ - struct oxnas_gpio_chip *oxnas_gpio = d->host_data; - int ret; - int pin = oxnas_gpio->chip.base + intspec[0]; - - if (WARN_ON(intsize < 2)) - return -EINVAL; - *out_hwirq = intspec[0]; - *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK; - - ret = gpio_request(pin, ctrlr->full_name); - if (ret) - return ret; - - ret = gpio_direction_input(pin); - if (ret) - return ret; - - return 0; -} - -static struct irq_domain_ops oxnas_gpio_ops = { - .map = oxnas_gpio_irq_map, - .xlate = oxnas_gpio_irq_domain_xlate, -}; - -static int oxnas_gpio_of_irq_setup(struct device_node *node, - struct oxnas_gpio_chip *oxnas_gpio, - unsigned int irq) -{ - /* Disable irqs of this controller */ - writel_relaxed(0, oxnas_gpio->regbase + RE_IRQ_ENABLE); - writel_relaxed(0, oxnas_gpio->regbase + FE_IRQ_ENABLE); - - /* Setup irq domain */ - oxnas_gpio->domain = irq_domain_add_linear(node, oxnas_gpio->chip.ngpio, - &oxnas_gpio_ops, oxnas_gpio); - if (!oxnas_gpio->domain) - panic("oxnas_gpio: couldn't allocate irq domain (DT).\n"); - - irq_set_chip_data(irq, oxnas_gpio); - irq_set_chained_handler(irq, gpio_irq_handler); - - return 0; -} - -/* This structure is replicated for each GPIO block allocated at probe time */ -static struct gpio_chip oxnas_gpio_template = { - .request = oxnas_gpio_request, - .free = oxnas_gpio_free, - .direction_input = oxnas_gpio_direction_input, - .get = oxnas_gpio_get, - .direction_output = oxnas_gpio_direction_output, - .set = oxnas_gpio_set, - .to_irq = oxnas_gpio_to_irq, - .dbg_show = oxnas_gpio_dbg_show, - .can_sleep = 0, - .ngpio = MAX_NB_GPIO_PER_BANK, -}; - -static struct of_device_id oxnas_gpio_of_match[] = { - { .compatible = "plxtech,nas782x-gpio"}, - { /* sentinel */ } -}; - -static int oxnas_gpio_probe(struct platform_device *pdev) -{ - struct device_node *np = pdev->dev.of_node; - struct resource *res; - struct oxnas_gpio_chip *oxnas_chip = NULL; - struct gpio_chip *chip; - struct pinctrl_gpio_range *range; - int ret = 0; - int irq, i; - int alias_idx = of_alias_get_id(np, "gpio"); - uint32_t ngpio; - char **names; - - BUG_ON(alias_idx >= ARRAY_SIZE(gpio_chips)); - if (gpio_chips[alias_idx]) { - ret = -EBUSY; - goto err; - } - - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - ret = irq; - goto err; - } - - oxnas_chip = devm_kzalloc(&pdev->dev, sizeof(*oxnas_chip), GFP_KERNEL); - if (!oxnas_chip) { - ret = -ENOMEM; - goto err; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - oxnas_chip->regbase = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(oxnas_chip->regbase)) { - ret = PTR_ERR(oxnas_chip->regbase); - goto err; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - oxnas_chip->ctrlbase = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(oxnas_chip->ctrlbase)) { - ret = PTR_ERR(oxnas_chip->ctrlbase); - goto err; - } - - oxnas_chip->chip = oxnas_gpio_template; - - spin_lock_init(&oxnas_chip->lock); - - chip = &oxnas_chip->chip; - chip->of_node = np; - chip->label = dev_name(&pdev->dev); - chip->dev = &pdev->dev; - chip->owner = THIS_MODULE; - chip->base = alias_idx * MAX_NB_GPIO_PER_BANK; - - if (!of_property_read_u32(np, "#gpio-lines", &ngpio)) { - if (ngpio > MAX_NB_GPIO_PER_BANK) - pr_err("oxnas_gpio.%d, gpio-nb >= %d failback to %d\n", - alias_idx, MAX_NB_GPIO_PER_BANK, - MAX_NB_GPIO_PER_BANK); - else - chip->ngpio = ngpio; - } - - names = devm_kzalloc(&pdev->dev, sizeof(char *) * chip->ngpio, - GFP_KERNEL); - - if (!names) { - ret = -ENOMEM; - goto err; - } - - for (i = 0; i < chip->ngpio; i++) - names[i] = kasprintf(GFP_KERNEL, "MF_%c%d", alias_idx + 'A', i); - - chip->names = (const char *const *)names; - - range = &oxnas_chip->range; - range->name = chip->label; - range->id = alias_idx; - range->pin_base = range->base = range->id * MAX_NB_GPIO_PER_BANK; - - range->npins = chip->ngpio; - range->gc = chip; - - ret = gpiochip_add(chip); - if (ret) - goto err; - - gpio_chips[alias_idx] = oxnas_chip; - gpio_banks = max(gpio_banks, alias_idx + 1); - - oxnas_gpio_of_irq_setup(np, oxnas_chip, irq); - - dev_info(&pdev->dev, "at address %p\n", oxnas_chip->regbase); - - return 0; -err: - dev_err(&pdev->dev, "Failure %i for GPIO %i\n", ret, alias_idx); - - return ret; -} - -static struct platform_driver oxnas_gpio_driver = { - .driver = { - .name = "gpio-oxnas", - .owner = THIS_MODULE, - .of_match_table = of_match_ptr(oxnas_gpio_of_match), - }, - .probe = oxnas_gpio_probe, -}; - -static struct platform_driver oxnas_pinctrl_driver = { - .driver = { - .name = "pinctrl-oxnas", - .owner = THIS_MODULE, - .of_match_table = of_match_ptr(oxnas_pinctrl_of_match), - }, - .probe = oxnas_pinctrl_probe, - .remove = oxnas_pinctrl_remove, -}; - -static int __init oxnas_pinctrl_init(void) -{ - int ret; - - ret = platform_driver_register(&oxnas_gpio_driver); - if (ret) - return ret; - return platform_driver_register(&oxnas_pinctrl_driver); -} -arch_initcall(oxnas_pinctrl_init); - -static void __exit oxnas_pinctrl_exit(void) -{ - platform_driver_unregister(&oxnas_pinctrl_driver); -} - -module_exit(oxnas_pinctrl_exit); -MODULE_AUTHOR("Ma Hajun "); -MODULE_DESCRIPTION("Plxtech Nas782x pinctrl driver"); -MODULE_LICENSE("GPL v2"); diff --git a/target/linux/oxnas/files/drivers/reset/reset-ox820.c b/target/linux/oxnas/files/drivers/reset/reset-ox820.c deleted file mode 100644 index 0a28de55f4..0000000000 --- a/target/linux/oxnas/files/drivers/reset/reset-ox820.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static int ox820_reset_reset(struct reset_controller_dev *rcdev, - unsigned long id) -{ - writel(BIT(id), SYS_CTRL_RST_SET_CTRL); - writel(BIT(id), SYS_CTRL_RST_CLR_CTRL); - return 0; -} - -static int ox820_reset_assert(struct reset_controller_dev *rcdev, - unsigned long id) -{ - writel(BIT(id), SYS_CTRL_RST_SET_CTRL); - - return 0; -} - -static int ox820_reset_deassert(struct reset_controller_dev *rcdev, - unsigned long id) -{ - writel(BIT(id), SYS_CTRL_RST_CLR_CTRL); - - return 0; -} - -static struct reset_control_ops ox820_reset_ops = { - .reset = ox820_reset_reset, - .assert = ox820_reset_assert, - .deassert = ox820_reset_deassert, -}; - -static const struct of_device_id ox820_reset_dt_ids[] = { - { .compatible = "plxtech,nas782x-reset", }, - { /* sentinel */ }, -}; -MODULE_DEVICE_TABLE(of, ox820_reset_dt_ids); - -struct reset_controller_dev rcdev; - -static int ox820_reset_probe(struct platform_device *pdev) -{ - struct reset_controller_dev *rcdev; - - rcdev = devm_kzalloc(&pdev->dev, sizeof(*rcdev), GFP_KERNEL); - if (!rcdev) - return -ENOMEM; - - /* note: reset controller is statically mapped */ - - rcdev->owner = THIS_MODULE; - rcdev->nr_resets = 32; - rcdev->ops = &ox820_reset_ops; - rcdev->of_node = pdev->dev.of_node; - reset_controller_register(rcdev); - platform_set_drvdata(pdev, rcdev); - - return 0; -} - -static int ox820_reset_remove(struct platform_device *pdev) -{ - struct reset_controller_dev *rcdev = platform_get_drvdata(pdev); - - reset_controller_unregister(rcdev); - - return 0; -} - -static struct platform_driver ox820_reset_driver = { - .probe = ox820_reset_probe, - .remove = ox820_reset_remove, - .driver = { - .name = "ox820-reset", - .owner = THIS_MODULE, - .of_match_table = ox820_reset_dt_ids, - }, -}; - -static int __init ox820_reset_init(void) -{ - return platform_driver_probe(&ox820_reset_driver, - ox820_reset_probe); -} -/* - * reset controller does not support probe deferral, so it has to be - * initialized before any user, in particular, PCIE uses subsys_initcall. - */ -arch_initcall(ox820_reset_init); - -MODULE_AUTHOR("Ma Haijun"); -MODULE_LICENSE("GPL"); diff --git a/target/linux/oxnas/files/drivers/usb/host/ehci-oxnas.c b/target/linux/oxnas/files/drivers/usb/host/ehci-oxnas.c index 15578a3027..79c4fa3a95 100644 --- a/target/linux/oxnas/files/drivers/usb/host/ehci-oxnas.c +++ b/target/linux/oxnas/files/drivers/usb/host/ehci-oxnas.c @@ -14,13 +14,59 @@ #include #include #include +#include #include #include #include #include +#include #include -#include -#include + +#define USBHSMPH_CTRL_REGOFFSET 0x40 +#define USBHSMPH_STAT_REGOFFSET 0x44 +#define REF300_DIV_REGOFFSET 0xF8 +#define USBHSPHY_CTRL_REGOFFSET 0x84 +#define USB_CTRL_REGOFFSET 0x90 +#define PLLB_DIV_CTRL_REGOFFSET 0x1000F8 +#define USBHSPHY_SUSPENDM_MANUAL_ENABLE 16 +#define USBHSPHY_SUSPENDM_MANUAL_STATE 15 +#define USBHSPHY_ATE_ESET 14 +#define USBHSPHY_TEST_DIN 6 +#define USBHSPHY_TEST_ADD 2 +#define USBHSPHY_TEST_DOUT_SEL 1 +#define USBHSPHY_TEST_CLK 0 + +#define USB_CTRL_USBAPHY_CKSEL_SHIFT 5 +#define USB_CLK_XTAL0_XTAL1 (0 << USB_CTRL_USBAPHY_CKSEL_SHIFT) +#define USB_CLK_XTAL0 (1 << USB_CTRL_USBAPHY_CKSEL_SHIFT) +#define USB_CLK_INTERNAL (2 << USB_CTRL_USBAPHY_CKSEL_SHIFT) + +#define USBAMUX_DEVICE BIT(4) + +#define USBPHY_REFCLKDIV_SHIFT 2 +#define USB_PHY_REF_12MHZ (0 << USBPHY_REFCLKDIV_SHIFT) +#define USB_PHY_REF_24MHZ (1 << USBPHY_REFCLKDIV_SHIFT) +#define USB_PHY_REF_48MHZ (2 << USBPHY_REFCLKDIV_SHIFT) + +#define USB_CTRL_USB_CKO_SEL_BIT 0 + +#define USB_INT_CLK_XTAL 0 +#define USB_INT_CLK_REF300 2 +#define USB_INT_CLK_PLLB 3 + +#define REF300_DIV_INT_SHIFT 8 +#define REF300_DIV_FRAC_SHIFT 0 +#define REF300_DIV_INT(val) ((val) << REF300_DIV_INT_SHIFT) +#define REF300_DIV_FRAC(val) ((val) << REF300_DIV_FRAC_SHIFT) + +#define PLLB_BYPASS 1 +#define PLLB_ENSAT 3 +#define PLLB_OUTDIV 4 +#define PLLB_REFDIV 8 +#define PLLB_DIV_INT_SHIFT 8 +#define PLLB_DIV_FRAC_SHIFT 0 +#define PLLB_DIV_INT(val) ((val) << PLLB_DIV_INT_SHIFT) +#define PLLB_DIV_FRAC(val) ((val) << PLLB_DIV_FRAC_SHIFT) #include "ehci.h" @@ -33,6 +79,7 @@ struct oxnas_hcd { struct reset_control *rst_host; struct reset_control *rst_phya; struct reset_control *rst_phyb; + struct regmap *syscon; }; #define DRIVER_DESC "Oxnas On-Chip EHCI Host Controller" @@ -41,21 +88,16 @@ static struct hc_driver __read_mostly oxnas_hc_driver; static void start_oxnas_usb_ehci(struct oxnas_hcd *oxnas) { - u32 reg; - if (oxnas->use_pllb) { /* enable pllb */ clk_prepare_enable(oxnas->refsrc); /* enable ref600 */ clk_prepare_enable(oxnas->phyref); /* 600MHz pllb divider for 12MHz */ - writel(PLLB_DIV_INT(50) | PLLB_DIV_FRAC(0), - SEC_CTRL_PLLB_DIV_CTRL); - + regmap_write_bits(oxnas->syscon, PLLB_DIV_CTRL_REGOFFSET, 0xffff, PLLB_DIV_INT(50) | PLLB_DIV_FRAC(0)); } else { /* ref 300 divider for 12MHz */ - writel(REF300_DIV_INT(25) | REF300_DIV_FRAC(0), - SYS_CTRL_REF300_DIV); + regmap_write_bits(oxnas->syscon, REF300_DIV_REGOFFSET, 0xffff, REF300_DIV_INT(25) | REF300_DIV_FRAC(0)); } /* Ensure the USB block is properly reset */ @@ -65,31 +107,34 @@ static void start_oxnas_usb_ehci(struct oxnas_hcd *oxnas) /* Force the high speed clock to be generated all the time, via serial programming of the USB HS PHY */ - writel((2UL << USBHSPHY_TEST_ADD) | - (0xe0UL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL); + regmap_write_bits(oxnas->syscon, USBHSPHY_CTRL_REGOFFSET, 0xffff, + (2UL << USBHSPHY_TEST_ADD) | + (0xe0UL << USBHSPHY_TEST_DIN)); - writel((1UL << USBHSPHY_TEST_CLK) | - (2UL << USBHSPHY_TEST_ADD) | - (0xe0UL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL); + regmap_write_bits(oxnas->syscon, USBHSPHY_CTRL_REGOFFSET, 0xffff, + (1UL << USBHSPHY_TEST_CLK) | + (2UL << USBHSPHY_TEST_ADD) | + (0xe0UL << USBHSPHY_TEST_DIN)); - writel((0xfUL << USBHSPHY_TEST_ADD) | - (0xaaUL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL); + regmap_write_bits(oxnas->syscon, USBHSPHY_CTRL_REGOFFSET, 0xffff, + (0xfUL << USBHSPHY_TEST_ADD) | + (0xaaUL << USBHSPHY_TEST_DIN)); - writel((1UL << USBHSPHY_TEST_CLK) | - (0xfUL << USBHSPHY_TEST_ADD) | - (0xaaUL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL); + regmap_write_bits(oxnas->syscon, USBHSPHY_CTRL_REGOFFSET, 0xffff, + (1UL << USBHSPHY_TEST_CLK) | + (0xfUL << USBHSPHY_TEST_ADD) | + (0xaaUL << USBHSPHY_TEST_DIN)); if (oxnas->use_pllb) /* use pllb clock */ - writel(USB_CLK_INTERNAL | USB_INT_CLK_PLLB, SYS_CTRL_USB_CTRL); + regmap_write_bits(oxnas->syscon, USB_CTRL_REGOFFSET, 0xffff, + USB_CLK_INTERNAL | USB_INT_CLK_PLLB); else /* use ref300 derived clock */ - writel(USB_CLK_INTERNAL | USB_INT_CLK_REF300, - SYS_CTRL_USB_CTRL); + regmap_write_bits(oxnas->syscon, USB_CTRL_REGOFFSET, 0xffff, + USB_CLK_INTERNAL | USB_INT_CLK_REF300); if (oxnas->use_phya) { /* Configure USB PHYA as a host */ - reg = readl(SYS_CTRL_USB_CTRL); - reg &= ~USBAMUX_DEVICE; - writel(reg, SYS_CTRL_USB_CTRL); + regmap_update_bits(oxnas->syscon, USB_CTRL_REGOFFSET, USBAMUX_DEVICE, 0); } /* Enable the clock to the USB block */ @@ -172,8 +217,14 @@ static int ehci_oxnas_drv_probe(struct platform_device *ofdev) oxnas = (struct oxnas_hcd *)hcd_to_ehci(hcd)->priv; - oxnas->use_pllb = of_property_read_bool(np, "plxtech,ehci_use_pllb"); - oxnas->use_phya = of_property_read_bool(np, "plxtech,ehci_use_phya"); + oxnas->use_pllb = of_property_read_bool(np, "oxsemi,ehci_use_pllb"); + oxnas->use_phya = of_property_read_bool(np, "oxsemi,ehci_use_phya"); + + oxnas->syscon = syscon_regmap_lookup_by_phandle(np, "oxsemi,sys-ctrl"); + if (IS_ERR(oxnas->syscon)) { + err = PTR_ERR(oxnas->syscon); + goto err_syscon; + } oxnas->clk = of_clk_get_by_name(np, "usb"); if (IS_ERR(oxnas->clk)) { @@ -249,6 +300,7 @@ err_phyref: clk_put(oxnas->refsrc); err_refsrc: clk_put(oxnas->clk); +err_syscon: err_clk: err_ioremap: err_res: diff --git a/target/linux/oxnas/image/Makefile b/target/linux/oxnas/image/Makefile index bfa0f0cca7..644c2b8795 100644 --- a/target/linux/oxnas/image/Makefile +++ b/target/linux/oxnas/image/Makefile @@ -1,107 +1,15 @@ -# -# Copyright (C) 2013-2016 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/image.mk -UBIFS_OPTS = -m 2048 -e 126KiB -c 4096 - -DEVICE_VARS += DTS UBIFS_OPTS - -KERNEL_LOADADDR := 0x60008000 - -define Build/ubootable - (dd if="$(STAGING_DIR_IMAGE)/u-boot.bin" bs=128k conv=sync; \ - dd if="$@" bs=128k conv=sync ) >> $@.new - @mv "$@.new" "$@" -endef - -define Device/Default - KERNEL_DEPENDS = $$(wildcard $$(DTS_DIR)/ox820-$$(DTS).dts) - KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/ox820-$$(DTS).dtb - KERNEL_NAME := zImage - KERNEL_SUFFIX := -uImage - KERNEL_INSTALL := 1 - KERNEL_INITRAMFS = kernel-bin | lzma | fit lzma $$(DTS_DIR)/ox820-$$(DTS).dtb | ubootable - KERNEL_INITRAMFS_PREFIX = $$(IMAGE_PREFIX)-u-boot-initramfs - KERNEL_INITRAMFS_SUFFIX := .bin - BLOCKSIZE := 128k - PAGESIZE := 2048 - SUBPAGESIZE := 512 - FILESYSTEMS := squashfs ubifs - PROFILES = Default $$(DTS) - IMAGES := ubinized.bin sysupgrade.tar - IMAGE/ubinized.bin := append-ubi - IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata - KERNEL_IN_UBI := 1 - UBOOTENV_IN_UBI := 1 -endef - -define Device/akitio - DTS := akitio - DEVICE_TITLE := Akitio MyCloud mini / Silverstone DC01 - DEVICE_PACKAGES := kmod-i2c-gpio kmod-rtc-ds1307 -endef -TARGET_DEVICES += akitio - -define Build/omninas-factory - rm -rf $@.tmp $@.dummy $@.dummy.gz - mkdir -p $@.tmp - $(CP) $@ $@.tmp/uImage - dd if=/dev/zero bs=64k count=4 of=$@.dummy - gzip $@.dummy - mkimage -A arm -T ramdisk -C gzip -n "dummy" \ - -d $@.dummy.gz \ - $@.tmp/rdimg.gz - echo 2.35.20140102 > $@.tmp/version ; echo >> $@.tmp/version - chmod 0744 $@.tmp/* - $(TAR) -C $@.tmp -czvf $@ \ - $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") . -endef - -define Build/encrypt-3des - openssl enc -des3 -a -k $(1) -in $@ -out $@.new && mv $@.new $@ -endef - -define Device/kd20 - DEVICE_DTS := ox820-kd20 - DEVICE_TITLE := Shuttle KD20 - KERNEL := kernel-bin | append-dtb | uImage none - KERNEL_INITRAMFS_PREFIX = $$(IMAGE_PREFIX)-factory - KERNEL_INITRAMFS_SUFFIX := .tar.gz - KERNEL_INITRAMFS = kernel-bin | append-dtb | uImage none | omninas-factory | encrypt-3des sohmuntitnlaes - KERNEL_IMAGE := zImage - DEVICE_PACKAGES := kmod-usb3 kmod-i2c-gpio kmod-rtc-pcf8563 kmod-gpio-beeper \ - kmod-hwmon-core kmod-hwmon-gpiofan \ - kmod-md-mod kmod-md-raid0 kmod-md-raid1 kmod-fs-ext4 kmod-fs-xfs - KERNEL_IN_UBI := - UBOOTENV_IN_UBI := -endef -TARGET_DEVICES += kd20 - -define Device/pogoplug-pro - DTS := pogoplug-pro - DEVICE_TITLE := Cloud Engines Pogoplug Pro (with mPCIe) -endef -TARGET_DEVICES += pogoplug-pro - -define Device/pogoplug-v3 - DTS := pogoplug-v3 - DEVICE_TITLE := Cloud Engines Pogoplug V3 (no mPCIe) -endef -TARGET_DEVICES += pogoplug-v3 - -define Device/stg212 - DTS := stg212 - DEVICE_TITLE := MitraStar STG-212 -endef -TARGET_DEVICES += stg212 - VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage +ifeq ($(SUBTARGET),ox810se) +include ox810se.mk +endif + +ifeq ($(SUBTARGET),ox820) +include ox820.mk +endif + $(eval $(call BuildImage)) diff --git a/target/linux/oxnas/image/ox810se.mk b/target/linux/oxnas/image/ox810se.mk new file mode 100644 index 0000000000..52170a26fa --- /dev/null +++ b/target/linux/oxnas/image/ox810se.mk @@ -0,0 +1,18 @@ +KERNEL_LOADADDR := 0x48008000 + +define Device/Default + KERNEL_NAME := zImage + KERNEL_SUFFIX := -uImage + KERNEL_INSTALL := 1 + FILESYSTEMS := squashfs ext4 + PROFILES = Default $$(DTS) + IMAGES := sysupgrade.tar + IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata +endef + +define Device/wd-mbwe + DEVICE_DTS := ox810se-wd-mbwe + DEVICE_TITLE := Western Digital My Book World Edition + KERNEL := kernel-bin | append-dtb | uImage none +endef +TARGET_DEVICES += wd-mbwe diff --git a/target/linux/oxnas/image/ox820.mk b/target/linux/oxnas/image/ox820.mk new file mode 100644 index 0000000000..9d41270a37 --- /dev/null +++ b/target/linux/oxnas/image/ox820.mk @@ -0,0 +1,81 @@ +UBIFS_OPTS = -m 2048 -e 126KiB -c 4096 +DEVICE_VARS += DTS UBIFS_OPTS +KERNEL_LOADADDR := 0x60008000 + +define Device/Default + KERNEL_NAME := zImage + KERNEL_SUFFIX := -uImage + KERNEL_INSTALL := 1 + BLOCKSIZE := 128k + PAGESIZE := 2048 + SUBPAGESIZE := 512 + FILESYSTEMS := squashfs ubifs + PROFILES = Default $$(DTS) + KERNEL := kernel-bin | append-dtb | uImage none + IMAGES := ubinized.bin sysupgrade.tar + IMAGE/ubinized.bin := append-ubi + IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata +endef + +define Build/omninas-factory + rm -rf $@.tmp $@.dummy $@.dummy.gz + mkdir -p $@.tmp + $(CP) $@ $@.tmp/uImage + dd if=/dev/zero bs=64k count=4 of=$@.dummy + gzip $@.dummy + mkimage -A arm -T ramdisk -C gzip -n "dummy" \ + -d $@.dummy.gz \ + $@.tmp/rdimg.gz + echo 2.35.20140102 > $@.tmp/version ; echo >> $@.tmp/version + chmod 0744 $@.tmp/* + $(TAR) -C $@.tmp -czvf $@ \ + $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") . +endef + +define Build/encrypt-3des + openssl enc -des3 -a -k $(1) -in $@ -out $@.new && mv $@.new $@ +endef + +define Device/akitio-mycloud + DEVICE_DTS := ox820-akitio-mycloud + DEVICE_TITLE := Akition myCloud (mini) / SilverStone DC01 + DEVICE_PACKAGES := kmod-usb2-oxnas kmod-ata-oxnas-sata kmod-ledtrig-usbdev \ + kmod-i2c-gpio kmod-rtc-ds1307 +endef +TARGET_DEVICES += akitio-mycloud + +define Device/cloudengines-pogoplug-pro + DEVICE_DTS := ox820-cloudengines-pogoplug-pro + DEVICE_TITLE := Cloud Engines PogoPlug Pro (with mPCIe) + DEVICE_PACKAGES := kmod-usb2-oxnas kmod-ledtrig-usbdev +endef +TARGET_DEVICES += cloudengines-pogoplug-pro + +define Device/cloudengines-pogoplug-series-3 + DEVICE_DTS := ox820-cloudengines-pogoplug-series-3 + DEVICE_TITLE := Cloud Engines PogoPlug Series V3 (without mPCIe) + DEVICE_PACKAGES := kmod-usb2-oxnas kmod-ledtrig-usbdev +endef +TARGET_DEVICES += cloudengines-pogoplug-series-3 + +define Device/shuttle-kd20 + DEVICE_DTS := ox820-shuttle-kd20 + DEVICE_TITLE := Shuttle KD20 + KERNEL := kernel-bin | append-dtb | uImage none + KERNEL_INITRAMFS_PREFIX = $$(IMAGE_PREFIX)-factory + KERNEL_INITRAMFS_SUFFIX := .tar.gz + KERNEL_INITRAMFS = kernel-bin | append-dtb | uImage none | omninas-factory | encrypt-3des sohmuntitnlaes + DEVICE_PACKAGES := kmod-usb2-oxnas kmod-ata-oxnas-sata kmod-ledtrig-usbdev \ + kmod-usb3 kmod-i2c-gpio kmod-rtc-pcf8563 kmod-gpio-beeper \ + kmod-hwmon-core kmod-hwmon-gpiofan \ + kmod-md-mod kmod-md-raid0 kmod-md-raid1 kmod-fs-ext4 kmod-fs-xfs +endef +TARGET_DEVICES += shuttle-kd20 + +define Device/mitrastar-stg212 + DEVICE_DTS := ox820-mitrastar-stg212 + DEVICE_TITLE := MitraStar STG-212 + KERNEL := kernel-bin | append-dtb | uImage none + DEVICE_PACKAGES := kmod-usb2-oxnas kmod-ata-oxnas-sata kmod-ledtrig-usbdev +endef +TARGET_DEVICES += mitrastar-stg212 diff --git a/target/linux/oxnas/modules.mk b/target/linux/oxnas/modules.mk index 7016398619..e7c959579b 100644 --- a/target/linux/oxnas/modules.mk +++ b/target/linux/oxnas/modules.mk @@ -1,11 +1,3 @@ -# -# Copyright (C) 2006-2014 OpenWrt.org -# Copyright (C) 2016 LEDE project -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - define KernelPackage/ata-oxnas-sata SUBMENU:=$(BLOCK_MENU) TITLE:=oxnas Serial ATA support @@ -17,7 +9,7 @@ define KernelPackage/ata-oxnas-sata endef define KernelPackage/ata-oxnas-sata/description - SATA support for OX934 core found in the OX82x/PLX782x SoCs + SATA support for OX934 core found in the OX8xx/PLX782x SoCs endef $(eval $(call KernelPackage,ata-oxnas-sata)) @@ -25,8 +17,8 @@ $(eval $(call KernelPackage,ata-oxnas-sata)) define KernelPackage/usb2-oxnas SUBMENU:=$(BLOCK_MENU) - TITLE:=OXNAS USB controller driver - DEPENDS:=@TARGET_oxnas +kmod-usb2 + TITLE:=OX820 EHCI driver + DEPENDS:=@TARGET_oxnas_ox820 +kmod-usb2 KCONFIG:=CONFIG_USB_EHCI_OXNAS FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-oxnas.ko AUTOLOAD:=$(call AutoLoad,55,ehci-oxnas,1) @@ -35,7 +27,7 @@ endef define KernelPackage/usb2-oxnas/description This driver provides USB Device Controller support for the - EHCI USB host built-in to the PLXTECH NAS782x SoC + EHCI USB host built-in to the OX820 SoC. endef $(eval $(call KernelPackage,usb2-oxnas)) diff --git a/target/linux/oxnas/ox810se/config-default b/target/linux/oxnas/ox810se/config-default new file mode 100644 index 0000000000..e8257cef4d --- /dev/null +++ b/target/linux/oxnas/ox810se/config-default @@ -0,0 +1,39 @@ +CONFIG_ARCH_MULTI_CPU_AUTO=y +# CONFIG_ARCH_MULTI_V4 is not set +# CONFIG_ARCH_MULTI_V4T is not set +CONFIG_ARCH_MULTI_V4_V5=y +CONFIG_ARCH_MULTI_V5=y +# CONFIG_CACHE_L2X0 is not set +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_ARM926T=y +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_IDLE=y +# CONFIG_CPU_IDLE_GOV_LADDER is not set +CONFIG_CPU_IDLE_GOV_MENU=y +CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_PM=y +CONFIG_CPU_THUMB_CAPABLE=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_USE_DOMAINS=y +# CONFIG_DEBUG_LL is not set +# CONFIG_DEBUG_UNCOMPRESS is not set +CONFIG_GENERIC_ATOMIC64=y +CONFIG_MACH_OX810SE=y +CONFIG_NEED_KUSER_HELPERS=y +CONFIG_NEED_PER_CPU_KM=y +# CONFIG_RCU_EXPERT is not set +# CONFIG_RCU_NEED_SEGCBLIST is not set +# CONFIG_RCU_STALL_COMMON is not set +CONFIG_SPLIT_PTLOCK_CPUS=999999 +CONFIG_TINY_SRCU=y +CONFIG_EXT4_FS=y +CONFIG_FAT_FS=y +CONFIG_FS_MBCACHE=y diff --git a/target/linux/oxnas/ox810se/profiles/00-default.mk b/target/linux/oxnas/ox810se/profiles/00-default.mk new file mode 100644 index 0000000000..275a9e1fbf --- /dev/null +++ b/target/linux/oxnas/ox810se/profiles/00-default.mk @@ -0,0 +1,10 @@ +define Profile/Default + NAME:=Default Profile + PRIORITY:=1 +endef + +define Profile/Default/Description + Default package set compatible with most boards. +endef + +$(eval $(call Profile,Default)) diff --git a/target/linux/oxnas/ox810se/target.mk b/target/linux/oxnas/ox810se/target.mk new file mode 100644 index 0000000000..4031fc57c3 --- /dev/null +++ b/target/linux/oxnas/ox810se/target.mk @@ -0,0 +1,9 @@ +FEATURES+=source-only + +SUBTARGET:=ox810se +BOARDNAME:=OX810SE +CPU_TYPE:=arm926ej-s + +define Target/Description + Oxford OX810SE +endef diff --git a/target/linux/oxnas/ox820/config-default b/target/linux/oxnas/ox820/config-default new file mode 100644 index 0000000000..47cd89d0d2 --- /dev/null +++ b/target/linux/oxnas/ox820/config-default @@ -0,0 +1,106 @@ +CONFIG_ARCH_HAS_TICK_BROADCAST=y +# CONFIG_ARCH_MULTI_CPU_AUTO is not set +CONFIG_ARCH_MULTI_V6=y +CONFIG_ARCH_MULTI_V6_V7=y +CONFIG_ARM_GIC=y +CONFIG_ARM_HEAVY_MB=y +CONFIG_CACHE_L2X0=y +# CONFIG_CACHE_L2X0_PMU is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_ABRT_EV6=y +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_CPU_HAS_ASID=y +# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_IDLE=y +# CONFIG_CPU_IDLE_GOV_LADDER is not set +CONFIG_CPU_IDLE_GOV_MENU=y +CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y +CONFIG_CPU_PABRT_V6=y +CONFIG_CPU_PM=y +CONFIG_CPU_RMAP=y +CONFIG_CPU_THUMB_CAPABLE=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_V6K=y +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_DEBUG_LL=y +CONFIG_DEBUG_LL_INCLUDE="debug/8250.S" +CONFIG_DEBUG_LL_UART_8250=y +# CONFIG_DEBUG_UART_8250 is not set +# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set +CONFIG_DEBUG_UART_8250_SHIFT=0 +CONFIG_DEBUG_UART_PHYS=0x44200000 +CONFIG_DEBUG_UART_VIRT=0xf4200000 +CONFIG_DEBUG_UNCOMPRESS=y +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress-ox820.h" +CONFIG_DMA_CACHE_RWFO=y +CONFIG_FIXED_PHY=y +CONFIG_FORCE_MAX_ZONEORDER=12 +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y +CONFIG_HAVE_ARM_SCU=y +CONFIG_HAVE_ARM_TWD=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_SMP=y +CONFIG_HOTPLUG_CPU=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_MACH_OX820=y +CONFIG_MIGHT_HAVE_CACHE_L2X0=y +CONFIG_MIGHT_HAVE_PCI=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_NET_FLOW_LIMIT=y +CONFIG_NR_CPUS=16 +CONFIG_OUTER_CACHE=y +CONFIG_OUTER_CACHE_SYNC=y +# CONFIG_PL310_ERRATA_588369 is not set +# CONFIG_PL310_ERRATA_727915 is not set +# CONFIG_PL310_ERRATA_753970 is not set +# CONFIG_PL310_ERRATA_769419 is not set +CONFIG_PM_SLEEP_SMP=y +CONFIG_RCU_CPU_STALL_TIMEOUT=21 +# CONFIG_RCU_EXPERT is not set +CONFIG_RCU_NEED_SEGCBLIST=y +CONFIG_RCU_STALL_COMMON=y +CONFIG_RFS_ACCEL=y +CONFIG_RPS=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_SMP=y +CONFIG_SMP_ON_UP=y +CONFIG_TREE_RCU=y +CONFIG_TREE_SRCU=y +CONFIG_XPS=y +CONFIG_PCI=y +CONFIG_PCIEAER=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIE_OXNAS=y +CONFIG_PCIE_PME=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_DOMAINS_GENERIC=y +CONFIG_PCI_MSI=y +CONFIG_PCI_MSI_IRQ_DOMAIN=y +# CONFIG_MTD_CFI is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_OXNAS=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BEB_LIMIT=20 +CONFIG_MTD_UBI_BLOCK=y +# CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is not set +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_SECURITY=y +CONFIG_UBIFS_FS_ZLIB=y +CONFIG_ARCH_WANT_LIBATA_LEDS=y +CONFIG_ATA_LEDS=y diff --git a/target/linux/oxnas/profiles/00-default.mk b/target/linux/oxnas/ox820/profiles/00-default.mk similarity index 100% rename from target/linux/oxnas/profiles/00-default.mk rename to target/linux/oxnas/ox820/profiles/00-default.mk diff --git a/target/linux/oxnas/ox820/target.mk b/target/linux/oxnas/ox820/target.mk new file mode 100644 index 0000000000..7c5745814d --- /dev/null +++ b/target/linux/oxnas/ox820/target.mk @@ -0,0 +1,12 @@ +SUBTARGET:=ox820 +BOARDNAME:=OX820/NAS782x +CPU_TYPE:=mpcore +FEATURES+=nand pci pcie ubifs usb + +DEFAULT_PACKAGES += \ + uboot-oxnas-ox820 + + +define Target/Description + Oxford/PLXTECH OX820/NAS782x +endef \ No newline at end of file diff --git a/target/linux/oxnas/patches-4.14/0001-ARM-dts-rename-oxnas-dts-files.patch b/target/linux/oxnas/patches-4.14/0001-ARM-dts-rename-oxnas-dts-files.patch new file mode 100644 index 0000000000..20289b3903 --- /dev/null +++ b/target/linux/oxnas/patches-4.14/0001-ARM-dts-rename-oxnas-dts-files.patch @@ -0,0 +1,48 @@ +From a9d2b105ccd23e07e3dd99d010a34bd5d1c95b42 Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Sat, 13 Jan 2018 18:35:59 +0100 +Subject: [PATCH 1/3] ARM: dts: rename oxnas dts files + +Other platforms' device-tree files start with a platform prefix, such as +sun7i-a20-*.dts or at91-*.dts. +This naming scheme turns out to be handy when using multi-platform build +systems such as OpenWrt. +Prepend oxnas files with their platform prefix to comply with the naming +scheme already used for most other platforms. + +Signed-off-by: Daniel Golle +Signed-off-by: Arnd Bergmann +--- + arch/arm/boot/dts/Makefile | 4 ++-- + arch/arm/boot/dts/{wd-mbwe.dts => ox810se-wd-mbwe.dts} | 0 + ...-series-3.dts => ox820-cloudengines-pogoplug-series-3.dts} | 0 + 3 files changed, 2 insertions(+), 2 deletions(-) + rename arch/arm/boot/dts/{wd-mbwe.dts => ox810se-wd-mbwe.dts} (100%) + rename arch/arm/boot/dts/{cloudengines-pogoplug-series-3.dts => ox820-cloudengines-pogoplug-series-3.dts} (100%) + +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index eff87a344566..1ae23ffa6ff4 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -685,8 +685,8 @@ dtb-$(CONFIG_ARCH_ACTIONS) += \ + dtb-$(CONFIG_ARCH_PRIMA2) += \ + prima2-evb.dtb + dtb-$(CONFIG_ARCH_OXNAS) += \ +- wd-mbwe.dtb \ +- cloudengines-pogoplug-series-3.dtb ++ ox810se-wd-mbwe.dtb \ ++ ox820-cloudengines-pogoplug-series-3.dtb + dtb-$(CONFIG_ARCH_QCOM) += \ + qcom-apq8060-dragonboard.dtb \ + qcom-apq8064-arrow-sd-600eval.dtb \ +diff --git a/arch/arm/boot/dts/wd-mbwe.dts b/arch/arm/boot/dts/ox810se-wd-mbwe.dts +similarity index 100% +rename from arch/arm/boot/dts/wd-mbwe.dts +rename to arch/arm/boot/dts/ox810se-wd-mbwe.dts +diff --git a/arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts +similarity index 100% +rename from arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts +rename to arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts +-- +2.17.1 + diff --git a/target/linux/oxnas/patches-4.14/0002-MAINTAINERS-update-ARM-OXNAS-platform-support-patter.patch b/target/linux/oxnas/patches-4.14/0002-MAINTAINERS-update-ARM-OXNAS-platform-support-patter.patch new file mode 100644 index 0000000000..66dacabbd7 --- /dev/null +++ b/target/linux/oxnas/patches-4.14/0002-MAINTAINERS-update-ARM-OXNAS-platform-support-patter.patch @@ -0,0 +1,39 @@ +From a018141970d80677d2822fef9d391b85bf9cf99f Mon Sep 17 00:00:00 2001 +From: Joe Perches +Date: Tue, 6 Feb 2018 15:42:33 -0800 +Subject: [PATCH 2/3] MAINTAINERS: update "ARM/OXNAS platform support" patterns + +Commit 9e6c62b05c1b ("ARM: dts: rename oxnas dts files") renamed the +files, update the patterns. + +[akpm@linux-foundation.org: crunch into a single globbed term, per Arnd] +Link: http://lkml.kernel.org/r/b39d779e143b3c0a4e7dff827346e509447e3e8e.1517147485.git.joe@perches.com +Signed-off-by: Joe Perches +Reviewed-by: Andrew Morton +Cc: Daniel Golle +Cc: Arnd Bergmann +Cc: Neil Armstrong +Signed-off-by: Andrew Morton +Signed-off-by: Linus Torvalds +--- + MAINTAINERS | 4 +--- + 1 file changed, 1 insertion(+), 3 deletions(-) + +diff --git a/MAINTAINERS b/MAINTAINERS +index 546beb6b0176..6ecdaed0a3ef 100644 +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -1677,9 +1677,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) + L: linux-oxnas@lists.tuxfamily.org (moderated for non-subscribers) + S: Maintained + F: arch/arm/mach-oxnas/ +-F: arch/arm/boot/dts/ox8*.dtsi +-F: arch/arm/boot/dts/wd-mbwe.dts +-F: arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts ++F: arch/arm/boot/dts/ox8*.dts* + N: oxnas + + ARM/PALM TREO SUPPORT +-- +2.17.1 + diff --git a/target/linux/oxnas/patches-4.14/0003-ARM-configs-add-OXNAS-v6-defconfig.patch b/target/linux/oxnas/patches-4.14/0003-ARM-configs-add-OXNAS-v6-defconfig.patch new file mode 100644 index 0000000000..bc4bc369da --- /dev/null +++ b/target/linux/oxnas/patches-4.14/0003-ARM-configs-add-OXNAS-v6-defconfig.patch @@ -0,0 +1,117 @@ +From 22c1774af921a1cdb33bd37b44977b5b34ea58d0 Mon Sep 17 00:00:00 2001 +From: Neil Armstrong +Date: Wed, 14 Mar 2018 09:35:44 +0100 +Subject: [PATCH 3/3] ARM: configs: add OXNAS v6 defconfig + +This patchs adds the minimal defconfig for the OXNAS ARMv6 SoCs +including the OX820 SoC and needed minimal configurations. + +Signed-off-by: Neil Armstrong +Signed-off-by: Arnd Bergmann +--- + arch/arm/configs/oxnas_v6_defconfig | 93 +++++++++++++++++++++++++++++ + 1 file changed, 93 insertions(+) + create mode 100644 arch/arm/configs/oxnas_v6_defconfig + +diff --git a/arch/arm/configs/oxnas_v6_defconfig b/arch/arm/configs/oxnas_v6_defconfig +new file mode 100644 +index 000000000000..f6ba32c9d173 +--- /dev/null ++++ b/arch/arm/configs/oxnas_v6_defconfig +@@ -0,0 +1,93 @@ ++CONFIG_SYSVIPC=y ++CONFIG_NO_HZ=y ++CONFIG_HIGH_RES_TIMERS=y ++CONFIG_CGROUPS=y ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_EMBEDDED=y ++CONFIG_PERF_EVENTS=y ++CONFIG_STRICT_KERNEL_RWX=y ++CONFIG_STRICT_MODULE_RWX=y ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++CONFIG_PARTITION_ADVANCED=y ++CONFIG_CMDLINE_PARTITION=y ++CONFIG_ARCH_MULTI_V6=y ++CONFIG_ARCH_OXNAS=y ++CONFIG_MACH_OX820=y ++CONFIG_SMP=y ++CONFIG_NR_CPUS=16 ++CONFIG_CMA=y ++CONFIG_FORCE_MAX_ZONEORDER=12 ++CONFIG_SECCOMP=y ++CONFIG_ARM_APPENDED_DTB=y ++CONFIG_ARM_ATAG_DTB_COMPAT=y ++CONFIG_KEXEC=y ++CONFIG_EFI=y ++CONFIG_CPU_IDLE=y ++CONFIG_ARM_CPUIDLE=y ++CONFIG_VFP=y ++CONFIG_NET=y ++CONFIG_PACKET=y ++CONFIG_UNIX=y ++CONFIG_INET=y ++CONFIG_IP_PNP=y ++CONFIG_IP_PNP_DHCP=y ++CONFIG_IP_PNP_BOOTP=y ++CONFIG_IP_PNP_RARP=y ++CONFIG_IPV6_ROUTER_PREF=y ++CONFIG_IPV6_OPTIMISTIC_DAD=y ++CONFIG_INET6_AH=m ++CONFIG_INET6_ESP=m ++CONFIG_INET6_IPCOMP=m ++CONFIG_IPV6_MIP6=m ++CONFIG_IPV6_TUNNEL=m ++CONFIG_IPV6_MULTIPLE_TABLES=y ++CONFIG_DEVTMPFS=y ++CONFIG_DEVTMPFS_MOUNT=y ++CONFIG_DMA_CMA=y ++CONFIG_CMA_SIZE_MBYTES=64 ++CONFIG_SIMPLE_PM_BUS=y ++CONFIG_MTD=y ++CONFIG_MTD_CMDLINE_PARTS=y ++CONFIG_MTD_BLOCK=y ++CONFIG_MTD_NAND=y ++CONFIG_MTD_NAND_OXNAS=y ++CONFIG_MTD_UBI=y ++CONFIG_BLK_DEV_LOOP=y ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_SIZE=65536 ++CONFIG_NETDEVICES=y ++CONFIG_STMMAC_ETH=y ++CONFIG_REALTEK_PHY=y ++CONFIG_INPUT_EVDEV=y ++CONFIG_SERIAL_8250=y ++CONFIG_SERIAL_8250_CONSOLE=y ++CONFIG_SERIAL_OF_PLATFORM=y ++CONFIG_GPIO_GENERIC_PLATFORM=y ++CONFIG_NEW_LEDS=y ++CONFIG_LEDS_CLASS=y ++CONFIG_LEDS_CLASS_FLASH=m ++CONFIG_LEDS_GPIO=y ++CONFIG_LEDS_TRIGGERS=y ++CONFIG_LEDS_TRIGGER_TIMER=y ++CONFIG_LEDS_TRIGGER_ONESHOT=y ++CONFIG_LEDS_TRIGGER_HEARTBEAT=y ++CONFIG_LEDS_TRIGGER_CPU=y ++CONFIG_LEDS_TRIGGER_GPIO=y ++CONFIG_LEDS_TRIGGER_DEFAULT_ON=y ++CONFIG_ARM_TIMER_SP804=y ++CONFIG_EXT4_FS=y ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_TMPFS=y ++CONFIG_TMPFS_POSIX_ACL=y ++CONFIG_UBIFS_FS=y ++CONFIG_PSTORE=y ++CONFIG_PSTORE_CONSOLE=y ++CONFIG_PSTORE_PMSG=y ++CONFIG_PSTORE_RAM=y ++CONFIG_NLS_CODEPAGE_437=y ++CONFIG_NLS_ISO8859_1=y ++CONFIG_NLS_UTF8=y ++CONFIG_PRINTK_TIME=y ++CONFIG_MAGIC_SYSRQ=y +-- +2.17.1 + diff --git a/target/linux/oxnas/patches-4.14/050-ox820-remove-left-overs.patch b/target/linux/oxnas/patches-4.14/050-ox820-remove-left-overs.patch new file mode 100644 index 0000000000..6dd3b056cf --- /dev/null +++ b/target/linux/oxnas/patches-4.14/050-ox820-remove-left-overs.patch @@ -0,0 +1,70 @@ +From 552ed4955c1fee1109bf5ba137dc35a411a1448c Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Fri, 1 Jun 2018 02:41:15 +0200 +Subject: [PATCH] arm: ox820: remove left-overs + +Signed-off-by: Daniel Golle +--- + drivers/clk/clk-oxnas.c | 2 -- + include/dt-bindings/clock/oxsemi,ox820.h | 32 +++++++++++------------- + 2 files changed, 14 insertions(+), 20 deletions(-) + +diff --git a/drivers/clk/clk-oxnas.c b/drivers/clk/clk-oxnas.c +index e51e0023fc6e..da6af71649de 100644 +--- a/drivers/clk/clk-oxnas.c ++++ b/drivers/clk/clk-oxnas.c +@@ -40,8 +40,6 @@ struct oxnas_stdclk_data { + struct clk_hw_onecell_data *onecell_data; + struct clk_oxnas_gate **gates; + unsigned int ngates; +- struct clk_oxnas_pll **plls; +- unsigned int nplls; + }; + + /* Regmap offsets */ +diff --git a/include/dt-bindings/clock/oxsemi,ox820.h b/include/dt-bindings/clock/oxsemi,ox820.h +index f661ecc8d760..35b44ca1b104 100644 +--- a/include/dt-bindings/clock/oxsemi,ox820.h ++++ b/include/dt-bindings/clock/oxsemi,ox820.h +@@ -17,24 +17,20 @@ + #ifndef DT_CLOCK_OXSEMI_OX820_H + #define DT_CLOCK_OXSEMI_OX820_H + +-/* PLLs */ +-#define CLK_820_PLLA 0 +-#define CLK_820_PLLB 1 +- + /* Gate Clocks */ +-#define CLK_820_LEON 2 +-#define CLK_820_DMA_SGDMA 3 +-#define CLK_820_CIPHER 4 +-#define CLK_820_SD 5 +-#define CLK_820_SATA 6 +-#define CLK_820_AUDIO 7 +-#define CLK_820_USBMPH 8 +-#define CLK_820_ETHA 9 +-#define CLK_820_PCIEA 10 +-#define CLK_820_NAND 11 +-#define CLK_820_PCIEB 12 +-#define CLK_820_ETHB 13 +-#define CLK_820_REF600 14 +-#define CLK_820_USBDEV 15 ++#define CLK_820_LEON 0 ++#define CLK_820_DMA_SGDMA 1 ++#define CLK_820_CIPHER 2 ++#define CLK_820_SD 3 ++#define CLK_820_SATA 4 ++#define CLK_820_AUDIO 5 ++#define CLK_820_USBMPH 6 ++#define CLK_820_ETHA 7 ++#define CLK_820_PCIEA 8 ++#define CLK_820_NAND 9 ++#define CLK_820_PCIEB 10 ++#define CLK_820_ETHB 11 ++#define CLK_820_REF600 12 ++#define CLK_820_USBDEV 13 + + #endif /* DT_CLOCK_OXSEMI_OX820_H */ +-- +2.17.1 + diff --git a/target/linux/oxnas/patches-4.14/100-oxnas-clk-plla-pllb.patch b/target/linux/oxnas/patches-4.14/100-oxnas-clk-plla-pllb.patch new file mode 100644 index 0000000000..f78ecb26b2 --- /dev/null +++ b/target/linux/oxnas/patches-4.14/100-oxnas-clk-plla-pllb.patch @@ -0,0 +1,273 @@ +--- a/drivers/clk/clk-oxnas.c ++++ b/drivers/clk/clk-oxnas.c +@@ -16,19 +16,42 @@ + * along with this program. If not, see . + */ + ++#include ++#include + #include + #include + #include ++#include + #include + #include + #include + #include + #include + #include ++#include + + #include + #include + ++#define REF300_DIV_INT_SHIFT 8 ++#define REF300_DIV_FRAC_SHIFT 0 ++#define REF300_DIV_INT(val) ((val) << REF300_DIV_INT_SHIFT) ++#define REF300_DIV_FRAC(val) ((val) << REF300_DIV_FRAC_SHIFT) ++ ++#define PLLB_BYPASS 1 ++#define PLLB_ENSAT 3 ++#define PLLB_OUTDIV 4 ++#define PLLB_REFDIV 8 ++#define PLLB_DIV_INT_SHIFT 8 ++#define PLLB_DIV_FRAC_SHIFT 0 ++#define PLLB_DIV_INT(val) ((val) << PLLB_DIV_INT_SHIFT) ++#define PLLB_DIV_FRAC(val) ((val) << PLLB_DIV_FRAC_SHIFT) ++ ++#define PLLA_REFDIV_MASK 0x3F ++#define PLLA_REFDIV_SHIFT 8 ++#define PLLA_OUTDIV_MASK 0x7 ++#define PLLA_OUTDIV_SHIFT 4 ++ + /* Standard regmap gate clocks */ + struct clk_oxnas_gate { + struct clk_hw hw; +@@ -49,6 +70,135 @@ struct oxnas_stdclk_data { + #define CLK_SET_REGOFFSET 0x2c + #define CLK_CLR_REGOFFSET 0x30 + ++#define PLLA_CTRL0_REGOFFSET 0x1f0 ++#define PLLA_CTRL1_REGOFFSET 0x1f4 ++#define PLLB_CTRL0_REGOFFSET 0x1001f0 ++#define MHZ (1000 * 1000) ++ ++struct clk_oxnas_pll { ++ struct clk_hw hw; ++ struct device_node *devnode; ++ struct reset_control *rstc; ++ struct regmap *syscon; ++}; ++ ++#define to_clk_oxnas_pll(_hw) container_of(_hw, struct clk_oxnas_pll, hw) ++ ++static unsigned long plla_clk_recalc_rate(struct clk_hw *hw, ++ unsigned long parent_rate) ++{ ++ struct clk_oxnas_pll *plla = to_clk_oxnas_pll(hw); ++ unsigned long fin = parent_rate; ++ unsigned long refdiv, outdiv; ++ unsigned int pll0, fbdiv; ++ ++ BUG_ON(regmap_read(plla->syscon, PLLA_CTRL0_REGOFFSET, &pll0)); ++ ++ refdiv = (pll0 >> PLLA_REFDIV_SHIFT) & PLLA_REFDIV_MASK; ++ refdiv += 1; ++ outdiv = (pll0 >> PLLA_OUTDIV_SHIFT) & PLLA_OUTDIV_MASK; ++ outdiv += 1; ++ ++ BUG_ON(regmap_read(plla->syscon, PLLA_CTRL1_REGOFFSET, &fbdiv)); ++ /* seems we will not be here when pll is bypassed, so ignore this ++ * case */ ++ ++ return fin / MHZ * fbdiv / (refdiv * outdiv) / 32768 * MHZ; ++} ++ ++static const char *pll_clk_parents[] = { ++ "oscillator", ++}; ++ ++static struct clk_ops plla_ops = { ++ .recalc_rate = plla_clk_recalc_rate, ++}; ++ ++static struct clk_init_data clk_plla_init = { ++ .name = "plla", ++ .ops = &plla_ops, ++ .parent_names = pll_clk_parents, ++ .num_parents = ARRAY_SIZE(pll_clk_parents), ++}; ++ ++static int pllb_clk_is_prepared(struct clk_hw *hw) ++{ ++ struct clk_oxnas_pll *pllb = to_clk_oxnas_pll(hw); ++ ++ return !!pllb->rstc; ++} ++ ++static int pllb_clk_prepare(struct clk_hw *hw) ++{ ++ struct clk_oxnas_pll *pllb = to_clk_oxnas_pll(hw); ++ ++ pllb->rstc = of_reset_control_get(pllb->devnode, NULL); ++ ++ return IS_ERR(pllb->rstc) ? PTR_ERR(pllb->rstc) : 0; ++} ++ ++static void pllb_clk_unprepare(struct clk_hw *hw) ++{ ++ struct clk_oxnas_pll *pllb = to_clk_oxnas_pll(hw); ++ ++ BUG_ON(IS_ERR(pllb->rstc)); ++ ++ reset_control_put(pllb->rstc); ++ pllb->rstc = NULL; ++} ++ ++static int pllb_clk_enable(struct clk_hw *hw) ++{ ++ struct clk_oxnas_pll *pllb = to_clk_oxnas_pll(hw); ++ ++ BUG_ON(IS_ERR(pllb->rstc)); ++ ++ /* put PLL into bypass */ ++ regmap_update_bits(pllb->syscon, PLLB_CTRL0_REGOFFSET, BIT(PLLB_BYPASS), BIT(PLLB_BYPASS)); ++ wmb(); ++ udelay(10); ++ reset_control_assert(pllb->rstc); ++ udelay(10); ++ /* set PLL B control information */ ++ regmap_write_bits(pllb->syscon, PLLB_CTRL0_REGOFFSET, 0xffff, ++ (1 << PLLB_ENSAT) | (1 << PLLB_OUTDIV) | (2 << PLLB_REFDIV)); ++ reset_control_deassert(pllb->rstc); ++ udelay(100); ++ regmap_update_bits(pllb->syscon, PLLB_CTRL0_REGOFFSET, BIT(PLLB_BYPASS), 0); ++ ++ return 0; ++} ++ ++static void pllb_clk_disable(struct clk_hw *hw) ++{ ++ struct clk_oxnas_pll *pllb = to_clk_oxnas_pll(hw); ++ ++ BUG_ON(IS_ERR(pllb->rstc)); ++ ++ /* put PLL into bypass */ ++ regmap_update_bits(pllb->syscon, PLLB_CTRL0_REGOFFSET, BIT(PLLB_BYPASS), BIT(PLLB_BYPASS)); ++ ++ wmb(); ++ udelay(10); ++ ++ reset_control_assert(pllb->rstc); ++} ++ ++static struct clk_ops pllb_ops = { ++ .prepare = pllb_clk_prepare, ++ .unprepare = pllb_clk_unprepare, ++ .is_prepared = pllb_clk_is_prepared, ++ .enable = pllb_clk_enable, ++ .disable = pllb_clk_disable, ++}; ++ ++static struct clk_init_data clk_pllb_init = { ++ .name = "pllb", ++ .ops = &pllb_ops, ++ .parent_names = pll_clk_parents, ++ .num_parents = ARRAY_SIZE(pll_clk_parents), ++}; ++ + static inline struct clk_oxnas_gate *to_clk_oxnas_gate(struct clk_hw *hw) + { + return container_of(hw, struct clk_oxnas_gate, hw); +@@ -262,3 +412,42 @@ static struct platform_driver oxnas_stdc + }, + }; + builtin_platform_driver(oxnas_stdclk_driver); ++ ++void __init oxnas_init_plla(struct device_node *np) ++{ ++ struct clk *clk; ++ struct clk_oxnas_pll *plla; ++ ++ plla = kmalloc(sizeof(*plla), GFP_KERNEL); ++ BUG_ON(!plla); ++ ++ plla->syscon = syscon_node_to_regmap(of_get_parent(np)); ++ plla->hw.init = &clk_plla_init; ++ plla->devnode = np; ++ plla->rstc = NULL; ++ clk = clk_register(NULL, &plla->hw); ++ BUG_ON(IS_ERR(clk)); ++ /* mark it as enabled */ ++ clk_prepare_enable(clk); ++ of_clk_add_provider(np, of_clk_src_simple_get, clk); ++} ++CLK_OF_DECLARE(oxnas_plla, "plxtech,nas782x-plla", oxnas_init_plla); ++ ++void __init oxnas_init_pllb(struct device_node *np) ++{ ++ struct clk *clk; ++ struct clk_oxnas_pll *pllb; ++ ++ pllb = kmalloc(sizeof(*pllb), GFP_KERNEL); ++ BUG_ON(!pllb); ++ ++ pllb->syscon = syscon_node_to_regmap(of_get_parent(np)); ++ pllb->hw.init = &clk_pllb_init; ++ pllb->devnode = np; ++ pllb->rstc = NULL; ++ ++ clk = clk_register(NULL, &pllb->hw); ++ BUG_ON(IS_ERR(clk)); ++ of_clk_add_provider(np, of_clk_src_simple_get, clk); ++} ++CLK_OF_DECLARE(oxnas_pllb, "plxtech,nas782x-pllb", oxnas_init_pllb); +--- a/arch/arm/boot/dts/ox820.dtsi ++++ b/arch/arm/boot/dts/ox820.dtsi +@@ -60,12 +60,6 @@ + clocks = <&osc>; + }; + +- plla: plla { +- compatible = "fixed-clock"; +- #clock-cells = <0>; +- clock-frequency = <850000000>; +- }; +- + armclk: armclk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; +@@ -265,6 +259,19 @@ + compatible = "oxsemi,ox820-stdclk", "oxsemi,ox810se-stdclk"; + #clock-cells = <1>; + }; ++ ++ plla: plla { ++ compatible = "plxtech,nas782x-plla"; ++ #clock-cells = <0>; ++ clocks = <&osc>; ++ }; ++ ++ pllb: pllb { ++ compatible = "plxtech,nas782x-pllb"; ++ #clock-cells = <0>; ++ clocks = <&osc>; ++ resets = <&reset RESET_PLLB>; ++ }; + }; + }; + +@@ -286,6 +293,13 @@ + clocks = <&armclk>; + }; + ++ watchdog@620 { ++ compatible = "mpcore_wdt"; ++ reg = <0x620 0x20>; ++ interrupts = ; ++ clocks = <&armclk>; ++ }; ++ + gic: gic@1000 { + compatible = "arm,arm11mp-gic"; + interrupt-controller; diff --git a/target/linux/oxnas/patches-4.14/340-oxnas-pcie.patch b/target/linux/oxnas/patches-4.14/340-oxnas-pcie.patch new file mode 100644 index 0000000000..b1ae62b7af --- /dev/null +++ b/target/linux/oxnas/patches-4.14/340-oxnas-pcie.patch @@ -0,0 +1,108 @@ +--- a/drivers/pci/host/Kconfig ++++ b/drivers/pci/host/Kconfig +@@ -220,4 +220,9 @@ config VMD + To compile this driver as a module, choose M here: the + module will be called vmd. + ++config PCIE_OXNAS ++ bool "PLX Oxnas PCIe controller" ++ depends on ARCH_OXNAS ++ select PCIEPORTBUS ++ + endmenu +--- a/drivers/pci/host/Makefile ++++ b/drivers/pci/host/Makefile +@@ -20,6 +20,7 @@ obj-$(CONFIG_PCIE_ALTERA) += pcie-altera + obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o + obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o + obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o ++obj-$(CONFIG_PCIE_OXNAS) += pcie-oxnas.o + obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o + obj-$(CONFIG_VMD) += vmd.o + +--- a/arch/arm/boot/dts/ox820.dtsi ++++ b/arch/arm/boot/dts/ox820.dtsi +@@ -302,6 +302,83 @@ + reg = <0x1000 0x1000>, + <0x100 0x500>; + }; ++ ++ pcie0: pcie-controller@c00000 { ++ compatible = "plxtech,nas782x-pcie"; ++ device_type = "pci"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ++ /* flag & space bus address host address size */ ++ ranges = < 0x82000000 0 0x48000000 0x48000000 0 0x2000000 ++ 0xC2000000 0 0x4A000000 0x4A000000 0 0x1E00000 ++ 0x81000000 0 0x4BE00000 0x4BE00000 0 0x0100000 ++ 0x80000000 0 0x4BF00000 0x4BF00000 0 0x0100000>; ++ ++ bus-range = <0x00 0x7f>; ++ ++ /* cfg inbound translator phy*/ ++ reg = <0x47C00000 0x1000>, <0x47D00000 0x100>, <0x44A00000 0x10>; ++ ++ #interrupt-cells = <1>; ++ /* wild card mask, match all bus address & interrupt specifier */ ++ /* format: bus address mask, interrupt specifier mask */ ++ /* each bit 1 means need match, 0 means ignored when match */ ++ interrupt-map-mask = <0 0 0 0>; ++ /* format: a list of: bus address, interrupt specifier, ++ * parent interrupt controller & specifier */ ++ interrupt-map = <0 0 0 0 &gic 0 19 0x304>; ++ ++ gpios = <&gpio1 12 0>; ++ clocks = <&stdclk CLK_820_PCIEA>, <&pllb>; ++ clock-names = "pcie", "busclk"; ++ resets = <&reset RESET_PCIEA>, <&reset RESET_PCIEPHY>; ++ reset-names = "pcie", "phy"; ++ ++ plxtech,pcie-hcsl-bit = <2>; ++ plxtech,pcie-ctrl-offset = <0x120>; ++ plxtech,pcie-outbound-offset = <0x138>; ++ status = "disabled"; ++ }; ++ ++ pcie1: pcie-controller@e00000 { ++ compatible = "plxtech,nas782x-pcie"; ++ device_type = "pci"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ++ /* flag & space bus address host address size */ ++ ranges = < 0x82000000 0 0x4C000000 0x4C000000 0 0x2000000 ++ 0xC2000000 0 0x4E000000 0x4E000000 0 0x1E00000 ++ 0x81000000 0 0x4FE00000 0x4FE00000 0 0x0100000 ++ 0x80000000 0 0x4FF00000 0x4FF00000 0 0x0100000>; ++ ++ bus-range = <0x80 0xff>; ++ ++ /* cfg inbound translator phy*/ ++ reg = <0x47E00000 0x1000>, <0x47F00000 0x100>, <0x44A00000 0x10>; ++ ++ #interrupt-cells = <1>; ++ /* wild card mask, match all bus address & interrupt specifier */ ++ /* format: bus address mask, interrupt specifier mask */ ++ /* each bit 1 means need match, 0 means ignored when match */ ++ interrupt-map-mask = <0 0 0 0>; ++ /* format: a list of: bus address, interrupt specifier, ++ * parent interrupt controller & specifier */ ++ interrupt-map = <0 0 0 0 &gic 0 20 0x304>; ++ ++ /* gpios = <&gpio1 12 0>; */ ++ clocks = <&stdclk CLK_820_PCIEB>, <&pllb>; ++ clock-names = "pcie", "busclk"; ++ resets = <&reset RESET_PCIEB>, <&reset RESET_PCIEPHY>; ++ reset-names = "pcie", "phy"; ++ ++ plxtech,pcie-hcsl-bit = <3>; ++ plxtech,pcie-ctrl-offset = <0x124>; ++ plxtech,pcie-outbound-offset = <0x174>; ++ status = "disabled"; ++ }; ++ + }; + }; + }; diff --git a/target/linux/oxnas/patches-4.14/500-oxnas-sata.patch b/target/linux/oxnas/patches-4.14/500-oxnas-sata.patch new file mode 100644 index 0000000000..3825ef0acb --- /dev/null +++ b/target/linux/oxnas/patches-4.14/500-oxnas-sata.patch @@ -0,0 +1,49 @@ +--- a/drivers/ata/Kconfig ++++ b/drivers/ata/Kconfig +@@ -492,6 +492,13 @@ config SATA_VITESSE + + If unsure, say N. + ++config SATA_OXNAS ++ tristate "PLXTECH NAS782X SATA support" ++ help ++ This option enables support for Nas782x Serial ATA controller. ++ ++ If unsure, say N. ++ + comment "PATA SFF controllers with BMDMA" + + config PATA_ALI +--- a/drivers/ata/Makefile ++++ b/drivers/ata/Makefile +@@ -46,6 +46,7 @@ obj-$(CONFIG_SATA_SVW) += sata_svw.o + obj-$(CONFIG_SATA_ULI) += sata_uli.o + obj-$(CONFIG_SATA_VIA) += sata_via.o + obj-$(CONFIG_SATA_VITESSE) += sata_vsc.o ++obj-$(CONFIG_SATA_OXNAS) += sata_oxnas.o + + # SFF PATA w/ BMDMA + obj-$(CONFIG_PATA_ALI) += pata_ali.o +--- a/arch/arm/boot/dts/ox820.dtsi ++++ b/arch/arm/boot/dts/ox820.dtsi +@@ -380,5 +380,20 @@ + }; + + }; ++ ++ sata: sata@45900000 { ++ compatible = "plxtech,nas782x-sata"; ++ /* ports dmactl sgdma */ ++ reg = <0x45900000 0x20000>, <0x459A0000 0x40>, <0x459B0000 0x20>, ++ /* core phy descriptors (optional) */ ++ <0x459E0000 0x2000>, <0x44900000 0x0C>, <0x50000000 0x1000>; ++ interrupts = ; ++ clocks = <&stdclk CLK_820_SATA>; ++ resets = <&reset RESET_SATA>, <&reset RESET_SATA_LINK>, <&reset RESET_SATA_PHY>; ++ reset-names = "sata", "link", "phy"; ++ nr-ports = <1>; ++ status = "disabled"; ++ }; ++ + }; + }; diff --git a/target/linux/oxnas/patches-4.14/510-ox820-libata-leds.patch b/target/linux/oxnas/patches-4.14/510-ox820-libata-leds.patch new file mode 100644 index 0000000000..7788802887 --- /dev/null +++ b/target/linux/oxnas/patches-4.14/510-ox820-libata-leds.patch @@ -0,0 +1,10 @@ +--- linux-4.14.44.orig/arch/arm/mach-oxnas/Kconfig ++++ linux-4.14.44/arch/arm/mach-oxnas/Kconfig +@@ -1,6 +1,7 @@ + menuconfig ARCH_OXNAS + bool "Oxford Semiconductor OXNAS Family SoCs" + select ARCH_HAS_RESET_CONTROLLER ++ select ARCH_WANT_LIBATA_LEDS + select COMMON_CLK_OXNAS + select GPIOLIB + select MFD_SYSCON diff --git a/target/linux/oxnas/patches-4.14/800-oxnas-ehci.patch b/target/linux/oxnas/patches-4.14/800-oxnas-ehci.patch new file mode 100644 index 0000000000..8fd6f69c1d --- /dev/null +++ b/target/linux/oxnas/patches-4.14/800-oxnas-ehci.patch @@ -0,0 +1,51 @@ +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -334,6 +334,13 @@ config USB_OCTEON_EHCI + USB 2.0 device support. All CN6XXX based chips with USB are + supported. + ++config USB_EHCI_OXNAS ++ tristate "OXNAS EHCI Module" ++ depends on USB_EHCI_HCD && ARCH_OXNAS ++ select USB_EHCI_ROOT_HUB_TT ++ ---help--- ++ Enable support for the OX820 SOC's on-chip EHCI controller. ++ + endif # USB_EHCI_HCD + + config USB_OXU210HP_HCD +--- a/drivers/usb/host/Makefile ++++ b/drivers/usb/host/Makefile +@@ -43,6 +43,7 @@ obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci- + obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o + obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o + obj-$(CONFIG_USB_W90X900_EHCI) += ehci-w90x900.o ++obj-$(CONFIG_USB_EHCI_OXNAS) += ehci-oxnas.o + + obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o + obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o +--- a/arch/arm/boot/dts/ox820.dtsi ++++ b/arch/arm/boot/dts/ox820.dtsi +@@ -120,6 +120,22 @@ + status = "disabled"; + }; + ++ ehci: ehci@40200100 { ++ compatible = "plxtech,nas782x-ehci"; ++ reg = <0x40200100 0xf00>; ++ interrupts = ; ++ clocks = <&stdclk CLK_820_USBMPH>, <&pllb>, <&stdclk CLK_820_REF600>; ++ clock-names = "usb", "refsrc", "phyref"; ++ resets = <&reset RESET_USBHS>, <&reset RESET_USBPHYA>, <&reset RESET_USBPHYB>; ++ reset-names = "host", "phya", "phyb"; ++ oxsemi,sys-ctrl = <&sys>; ++ /* Otherwise ref300 is used, which is derived from sata phy ++ * in that case, usb depends on sata initialization */ ++ /* FIXME: how to make this dependency explicit ? */ ++ oxsemi,ehci_use_pllb; ++ status = "disabled"; ++ }; ++ + apb-bridge@44000000 { + #address-cells = <1>; + #size-cells = <1>; diff --git a/target/linux/oxnas/patches-4.4/996-ATAG_DTB_COMPAT_CMDLINE_MANGLE.patch b/target/linux/oxnas/patches-4.14/996-generic-Mangle-bootloader-s-kernel-arguments.patch similarity index 84% rename from target/linux/oxnas/patches-4.4/996-ATAG_DTB_COMPAT_CMDLINE_MANGLE.patch rename to target/linux/oxnas/patches-4.14/996-generic-Mangle-bootloader-s-kernel-arguments.patch index 6bffa6fe6a..7a4dce7502 100644 --- a/target/linux/oxnas/patches-4.4/996-ATAG_DTB_COMPAT_CMDLINE_MANGLE.patch +++ b/target/linux/oxnas/patches-4.14/996-generic-Mangle-bootloader-s-kernel-arguments.patch @@ -1,7 +1,7 @@ -Author: Adrian Panella -Date: Fri Jun 10 19:10:15 2016 -0500 - -generic: Mangle bootloader's kernel arguments +From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00 2001 +From: Adrian Panella +Date: Thu, 9 Mar 2017 09:37:17 +0100 +Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments The command-line arguments provided by the boot loader will be appended to a new device tree property: bootloader-args. @@ -13,12 +13,16 @@ sent by bootloader will be ignored. This is usefull in dual boot systems, to get the current root partition without afecting the rest of the system. - Signed-off-by: Adrian Panella +--- + arch/arm/Kconfig | 11 +++++ + arch/arm/boot/compressed/atags_to_fdt.c | 72 ++++++++++++++++++++++++++++++++- + init/main.c | 16 ++++++++ + 3 files changed, 98 insertions(+), 1 deletion(-) --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig -@@ -1943,6 +1943,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN +@@ -1938,6 +1938,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN The command-line arguments provided by the boot loader will be appended to the the device tree bootargs property. @@ -38,7 +42,7 @@ Signed-off-by: Adrian Panella config CMDLINE --- a/arch/arm/boot/compressed/atags_to_fdt.c +++ b/arch/arm/boot/compressed/atags_to_fdt.c -@@ -3,6 +3,8 @@ +@@ -4,6 +4,8 @@ #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND) #define do_extend_cmdline 1 @@ -47,7 +51,7 @@ Signed-off-by: Adrian Panella #else #define do_extend_cmdline 0 #endif -@@ -66,6 +68,59 @@ static uint32_t get_cell_size(const void +@@ -67,6 +69,59 @@ static uint32_t get_cell_size(const void return cell_size; } @@ -107,7 +111,7 @@ Signed-off-by: Adrian Panella static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline) { char cmdline[COMMAND_LINE_SIZE]; -@@ -85,12 +140,21 @@ static void merge_fdt_bootargs(void *fdt +@@ -86,12 +141,21 @@ static void merge_fdt_bootargs(void *fdt /* and append the ATAG_CMDLINE */ if (fdt_cmdline) { @@ -129,7 +133,7 @@ Signed-off-by: Adrian Panella } *ptr = '\0'; -@@ -147,7 +211,9 @@ int atags_to_fdt(void *atag_list, void * +@@ -148,7 +212,9 @@ int atags_to_fdt(void *atag_list, void * else setprop_string(fdt, "/chosen", "bootargs", atag->u.cmdline.cmdline); @@ -140,7 +144,7 @@ Signed-off-by: Adrian Panella if (memcount >= sizeof(mem_reg_property)/4) continue; if (!atag->u.mem.size) -@@ -186,6 +252,10 @@ int atags_to_fdt(void *atag_list, void * +@@ -187,6 +253,10 @@ int atags_to_fdt(void *atag_list, void * setprop(fdt, "/memory", "reg", mem_reg_property, 4 * memcount * memsize); } @@ -153,7 +157,7 @@ Signed-off-by: Adrian Panella } --- a/init/main.c +++ b/init/main.c -@@ -89,6 +89,10 @@ +@@ -96,6 +96,10 @@ #include #include @@ -164,7 +168,7 @@ Signed-off-by: Adrian Panella static int kernel_init(void *); extern void init_IRQ(void); -@@ -562,6 +566,18 @@ asmlinkage __visible void __init start_k +@@ -575,6 +579,18 @@ asmlinkage __visible void __init start_k page_alloc_init(); pr_notice("Kernel command line: %s\n", boot_command_line); diff --git a/target/linux/oxnas/patches-4.4/999-libata-hacks.patch b/target/linux/oxnas/patches-4.14/999-libata-hacks.patch similarity index 82% rename from target/linux/oxnas/patches-4.4/999-libata-hacks.patch rename to target/linux/oxnas/patches-4.14/999-libata-hacks.patch index ac278ab234..2a3ba72184 100644 --- a/target/linux/oxnas/patches-4.4/999-libata-hacks.patch +++ b/target/linux/oxnas/patches-4.14/999-libata-hacks.patch @@ -1,6 +1,6 @@ --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c -@@ -1589,6 +1589,14 @@ unsigned ata_exec_internal_sg(struct ata +@@ -1599,6 +1599,14 @@ unsigned ata_exec_internal_sg(struct ata return AC_ERR_SYSTEM; } @@ -15,7 +15,7 @@ /* initialize internal qc */ /* XXX: Tag 0 is used for drivers with legacy EH as some -@@ -4788,6 +4796,9 @@ struct ata_queued_cmd *ata_qc_new_init(s +@@ -5096,6 +5104,9 @@ struct ata_queued_cmd *ata_qc_new_init(s if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) return NULL; @@ -25,7 +25,7 @@ /* libsas case */ if (ap->flags & ATA_FLAG_SAS_HOST) { tag = ata_sas_allocate_tag(ap); -@@ -4833,6 +4844,8 @@ void ata_qc_free(struct ata_queued_cmd * +@@ -5141,6 +5152,8 @@ void ata_qc_free(struct ata_queued_cmd * qc->tag = ATA_TAG_POISON; if (ap->flags & ATA_FLAG_SAS_HOST) ata_sas_free_tag(tag, ap); @@ -36,7 +36,7 @@ --- a/include/linux/libata.h +++ b/include/linux/libata.h -@@ -906,6 +906,8 @@ struct ata_port_operations { +@@ -918,6 +918,8 @@ struct ata_port_operations { void (*qc_prep)(struct ata_queued_cmd *qc); unsigned int (*qc_issue)(struct ata_queued_cmd *qc); bool (*qc_fill_rtf)(struct ata_queued_cmd *qc); @@ -45,7 +45,7 @@ /* * Configuration and exception handling -@@ -996,6 +998,9 @@ struct ata_port_operations { +@@ -1008,6 +1010,9 @@ struct ata_port_operations { void (*phy_reset)(struct ata_port *ap); void (*eng_timeout)(struct ata_port *ap); diff --git a/target/linux/oxnas/patches-4.4/0072-mtd-backport-v4.7-0day-patches-from-Boris.patch b/target/linux/oxnas/patches-4.4/0072-mtd-backport-v4.7-0day-patches-from-Boris.patch deleted file mode 100644 index 204d6e0bc7..0000000000 --- a/target/linux/oxnas/patches-4.4/0072-mtd-backport-v4.7-0day-patches-from-Boris.patch +++ /dev/null @@ -1,5281 +0,0 @@ -From a369af5149e6eb442b22ce89b564dd7a76e03638 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Tue, 26 Apr 2016 19:05:01 +0200 -Subject: [PATCH 072/102] mtd: backport v4.7-0day patches from Boris - -Signed-off-by: John Crispin ---- - drivers/mtd/Kconfig | 4 +- - drivers/mtd/cmdlinepart.c | 3 +- - drivers/mtd/devices/m25p80.c | 44 +-- - drivers/mtd/maps/physmap_of.c | 6 +- - drivers/mtd/mtdchar.c | 123 ++++++-- - drivers/mtd/mtdconcat.c | 2 +- - drivers/mtd/mtdcore.c | 428 ++++++++++++++++++++++++-- - drivers/mtd/mtdcore.h | 7 +- - drivers/mtd/mtdpart.c | 161 ++++++---- - drivers/mtd/mtdswap.c | 24 +- - drivers/mtd/nand/Kconfig | 21 +- - drivers/mtd/nand/Makefile | 2 + - drivers/mtd/nand/nand_base.c | 571 +++++++++++++++++++---------------- - drivers/mtd/nand/nand_bbt.c | 34 +-- - drivers/mtd/nand/nand_bch.c | 52 ++-- - drivers/mtd/nand/nand_ecc.c | 6 +- - drivers/mtd/nand/nand_ids.c | 4 +- - drivers/mtd/nand/nandsim.c | 43 +-- - drivers/mtd/ofpart.c | 53 ++-- - drivers/mtd/spi-nor/Kconfig | 10 +- - drivers/mtd/spi-nor/Makefile | 1 + - drivers/mtd/spi-nor/mtk-quadspi.c | 485 +++++++++++++++++++++++++++++ - drivers/mtd/spi-nor/spi-nor.c | 321 +++++++++++++------- - drivers/mtd/tests/mtd_nandecctest.c | 2 +- - drivers/mtd/tests/oobtest.c | 49 ++- - drivers/mtd/tests/pagetest.c | 3 +- - include/linux/mtd/bbm.h | 1 - - include/linux/mtd/fsmc.h | 18 -- - include/linux/mtd/inftl.h | 1 - - include/linux/mtd/map.h | 9 +- - include/linux/mtd/mtd.h | 80 ++++- - include/linux/mtd/nand.h | 94 ++++-- - include/linux/mtd/nand_bch.h | 10 +- - include/linux/mtd/nftl.h | 1 - - include/linux/mtd/onenand.h | 2 - - include/linux/mtd/partitions.h | 27 +- - include/linux/mtd/sh_flctl.h | 4 +- - include/linux/mtd/sharpsl.h | 2 +- - include/linux/mtd/spi-nor.h | 23 +- - include/uapi/mtd/mtd-abi.h | 2 +- - 45 files changed, 2077 insertions(+), 748 deletions(-) - create mode 100644 drivers/mtd/spi-nor/mtk-quadspi.c - ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -131,7 +131,7 @@ config MTD_CMDLINE_PARTS - - config MTD_AFS_PARTS - tristate "ARM Firmware Suite partition parsing" -- depends on ARM -+ depends on (ARM || ARM64) - ---help--- - The ARM Firmware Suite allows the user to divide flash devices into - multiple 'images'. Each such image has a header containing its name -@@ -161,7 +161,7 @@ config MTD_AR7_PARTS - - config MTD_BCM63XX_PARTS - tristate "BCM63XX CFE partitioning support" -- depends on BCM63XX -+ depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST - select CRC32 - help - This provides partions parsing for BCM63xx devices with CFE ---- a/drivers/mtd/cmdlinepart.c -+++ b/drivers/mtd/cmdlinepart.c -@@ -304,7 +304,7 @@ static int mtdpart_setup_real(char *s) - * the first one in the chain if a NULL mtd_id is passed in. - */ - static int parse_cmdline_partitions(struct mtd_info *master, -- struct mtd_partition **pparts, -+ const struct mtd_partition **pparts, - struct mtd_part_parser_data *data) - { - unsigned long long offset; -@@ -382,7 +382,6 @@ static int __init mtdpart_setup(char *s) - __setup("mtdparts=", mtdpart_setup); - - static struct mtd_part_parser cmdline_parser = { -- .owner = THIS_MODULE, - .parse_fn = parse_cmdline_partitions, - .name = "cmdlinepart", - }; ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -174,22 +174,6 @@ static int m25p80_read(struct spi_nor *n - return 0; - } - --static int m25p80_erase(struct spi_nor *nor, loff_t offset) --{ -- struct m25p *flash = nor->priv; -- -- dev_dbg(nor->dev, "%dKiB at 0x%08x\n", -- flash->spi_nor.mtd.erasesize / 1024, (u32)offset); -- -- /* Set up command buffer. */ -- flash->command[0] = nor->erase_opcode; -- m25p_addr2cmd(nor, offset, flash->command); -- -- spi_write(flash->spi, flash->command, m25p_cmdsz(nor)); -- -- return 0; --} -- - /* - * board specific setup should have ensured the SPI clock used here - * matches what the READ command supports, at least until this driver -@@ -197,12 +181,11 @@ static int m25p80_erase(struct spi_nor * - */ - static int m25p_probe(struct spi_device *spi) - { -- struct mtd_part_parser_data ppdata; - struct flash_platform_data *data; - struct m25p *flash; - struct spi_nor *nor; - enum read_mode mode = SPI_NOR_NORMAL; -- char *flash_name = NULL; -+ char *flash_name; - int ret; - - data = dev_get_platdata(&spi->dev); -@@ -216,12 +199,11 @@ static int m25p_probe(struct spi_device - /* install the hooks */ - nor->read = m25p80_read; - nor->write = m25p80_write; -- nor->erase = m25p80_erase; - nor->write_reg = m25p80_write_reg; - nor->read_reg = m25p80_read_reg; - - nor->dev = &spi->dev; -- nor->flash_node = spi->dev.of_node; -+ spi_nor_set_flash_node(nor, spi->dev.of_node); - nor->priv = flash; - - spi_set_drvdata(spi, flash); -@@ -242,6 +224,8 @@ static int m25p_probe(struct spi_device - */ - if (data && data->type) - flash_name = data->type; -+ else if (!strcmp(spi->modalias, "spi-nor")) -+ flash_name = NULL; /* auto-detect */ - else - flash_name = spi->modalias; - -@@ -249,11 +233,8 @@ static int m25p_probe(struct spi_device - if (ret) - return ret; - -- ppdata.of_node = spi->dev.of_node; -- -- return mtd_device_parse_register(&nor->mtd, NULL, &ppdata, -- data ? data->parts : NULL, -- data ? data->nr_parts : 0); -+ return mtd_device_register(&nor->mtd, data ? data->parts : NULL, -+ data ? data->nr_parts : 0); - } - - -@@ -279,14 +260,21 @@ static int m25p_remove(struct spi_device - */ - static const struct spi_device_id m25p_ids[] = { - /* -+ * Allow non-DT platform devices to bind to the "spi-nor" modalias, and -+ * hack around the fact that the SPI core does not provide uevent -+ * matching for .of_match_table -+ */ -+ {"spi-nor"}, -+ -+ /* - * Entries not used in DTs that should be safe to drop after replacing -- * them with "nor-jedec" in platform data. -+ * them with "spi-nor" in platform data. - */ - {"s25sl064a"}, {"w25x16"}, {"m25p10"}, {"m25px64"}, - - /* -- * Entries that were used in DTs without "nor-jedec" fallback and should -- * be kept for backward compatibility. -+ * Entries that were used in DTs without "jedec,spi-nor" fallback and -+ * should be kept for backward compatibility. - */ - {"at25df321a"}, {"at25df641"}, {"at26df081a"}, - {"mr25h256"}, ---- a/drivers/mtd/maps/physmap_of.c -+++ b/drivers/mtd/maps/physmap_of.c -@@ -128,7 +128,6 @@ static int of_flash_probe(struct platfor - int reg_tuple_size; - struct mtd_info **mtd_list = NULL; - resource_size_t res_size; -- struct mtd_part_parser_data ppdata; - bool map_indirect; - const char *mtd_name = NULL; - -@@ -272,8 +271,9 @@ static int of_flash_probe(struct platfor - if (err) - goto err_out; - -- ppdata.of_node = dp; -- mtd_device_parse_register(info->cmtd, part_probe_types_def, &ppdata, -+ info->cmtd->dev.parent = &dev->dev; -+ mtd_set_of_node(info->cmtd, dp); -+ mtd_device_parse_register(info->cmtd, part_probe_types_def, NULL, - NULL, 0); - - kfree(mtd_list); ---- a/drivers/mtd/mtdchar.c -+++ b/drivers/mtd/mtdchar.c -@@ -465,38 +465,111 @@ static int mtdchar_readoob(struct file * - } - - /* -- * Copies (and truncates, if necessary) data from the larger struct, -- * nand_ecclayout, to the smaller, deprecated layout struct, -- * nand_ecclayout_user. This is necessary only to support the deprecated -- * API ioctl ECCGETLAYOUT while allowing all new functionality to use -- * nand_ecclayout flexibly (i.e. the struct may change size in new -- * releases without requiring major rewrites). -+ * Copies (and truncates, if necessary) OOB layout information to the -+ * deprecated layout struct, nand_ecclayout_user. This is necessary only to -+ * support the deprecated API ioctl ECCGETLAYOUT while allowing all new -+ * functionality to use mtd_ooblayout_ops flexibly (i.e. mtd_ooblayout_ops -+ * can describe any kind of OOB layout with almost zero overhead from a -+ * memory usage point of view). - */ --static int shrink_ecclayout(const struct nand_ecclayout *from, -- struct nand_ecclayout_user *to) -+static int shrink_ecclayout(struct mtd_info *mtd, -+ struct nand_ecclayout_user *to) - { -- int i; -+ struct mtd_oob_region oobregion; -+ int i, section = 0, ret; - -- if (!from || !to) -+ if (!mtd || !to) - return -EINVAL; - - memset(to, 0, sizeof(*to)); - -- to->eccbytes = min((int)from->eccbytes, MTD_MAX_ECCPOS_ENTRIES); -- for (i = 0; i < to->eccbytes; i++) -- to->eccpos[i] = from->eccpos[i]; -+ to->eccbytes = 0; -+ for (i = 0; i < MTD_MAX_ECCPOS_ENTRIES;) { -+ u32 eccpos; -+ -+ ret = mtd_ooblayout_ecc(mtd, section, &oobregion); -+ if (ret < 0) { -+ if (ret != -ERANGE) -+ return ret; -+ -+ break; -+ } -+ -+ eccpos = oobregion.offset; -+ for (; i < MTD_MAX_ECCPOS_ENTRIES && -+ eccpos < oobregion.offset + oobregion.length; i++) { -+ to->eccpos[i] = eccpos++; -+ to->eccbytes++; -+ } -+ } - - for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES; i++) { -- if (from->oobfree[i].length == 0 && -- from->oobfree[i].offset == 0) -+ ret = mtd_ooblayout_free(mtd, i, &oobregion); -+ if (ret < 0) { -+ if (ret != -ERANGE) -+ return ret; -+ - break; -- to->oobavail += from->oobfree[i].length; -- to->oobfree[i] = from->oobfree[i]; -+ } -+ -+ to->oobfree[i].offset = oobregion.offset; -+ to->oobfree[i].length = oobregion.length; -+ to->oobavail += to->oobfree[i].length; - } - - return 0; - } - -+static int get_oobinfo(struct mtd_info *mtd, struct nand_oobinfo *to) -+{ -+ struct mtd_oob_region oobregion; -+ int i, section = 0, ret; -+ -+ if (!mtd || !to) -+ return -EINVAL; -+ -+ memset(to, 0, sizeof(*to)); -+ -+ to->eccbytes = 0; -+ for (i = 0; i < ARRAY_SIZE(to->eccpos);) { -+ u32 eccpos; -+ -+ ret = mtd_ooblayout_ecc(mtd, section, &oobregion); -+ if (ret < 0) { -+ if (ret != -ERANGE) -+ return ret; -+ -+ break; -+ } -+ -+ if (oobregion.length + i > ARRAY_SIZE(to->eccpos)) -+ return -EINVAL; -+ -+ eccpos = oobregion.offset; -+ for (; eccpos < oobregion.offset + oobregion.length; i++) { -+ to->eccpos[i] = eccpos++; -+ to->eccbytes++; -+ } -+ } -+ -+ for (i = 0; i < 8; i++) { -+ ret = mtd_ooblayout_free(mtd, i, &oobregion); -+ if (ret < 0) { -+ if (ret != -ERANGE) -+ return ret; -+ -+ break; -+ } -+ -+ to->oobfree[i][0] = oobregion.offset; -+ to->oobfree[i][1] = oobregion.length; -+ } -+ -+ to->useecc = MTD_NANDECC_AUTOPLACE; -+ -+ return 0; -+} -+ - static int mtdchar_blkpg_ioctl(struct mtd_info *mtd, - struct blkpg_ioctl_arg *arg) - { -@@ -815,16 +888,12 @@ static int mtdchar_ioctl(struct file *fi - { - struct nand_oobinfo oi; - -- if (!mtd->ecclayout) -+ if (!mtd->ooblayout) - return -EOPNOTSUPP; -- if (mtd->ecclayout->eccbytes > ARRAY_SIZE(oi.eccpos)) -- return -EINVAL; - -- oi.useecc = MTD_NANDECC_AUTOPLACE; -- memcpy(&oi.eccpos, mtd->ecclayout->eccpos, sizeof(oi.eccpos)); -- memcpy(&oi.oobfree, mtd->ecclayout->oobfree, -- sizeof(oi.oobfree)); -- oi.eccbytes = mtd->ecclayout->eccbytes; -+ ret = get_oobinfo(mtd, &oi); -+ if (ret) -+ return ret; - - if (copy_to_user(argp, &oi, sizeof(struct nand_oobinfo))) - return -EFAULT; -@@ -913,14 +982,14 @@ static int mtdchar_ioctl(struct file *fi - { - struct nand_ecclayout_user *usrlay; - -- if (!mtd->ecclayout) -+ if (!mtd->ooblayout) - return -EOPNOTSUPP; - - usrlay = kmalloc(sizeof(*usrlay), GFP_KERNEL); - if (!usrlay) - return -ENOMEM; - -- shrink_ecclayout(mtd->ecclayout, usrlay); -+ shrink_ecclayout(mtd, usrlay); - - if (copy_to_user(argp, usrlay, sizeof(*usrlay))) - ret = -EFAULT; ---- a/drivers/mtd/mtdconcat.c -+++ b/drivers/mtd/mtdconcat.c -@@ -777,7 +777,7 @@ struct mtd_info *mtd_concat_create(struc - - } - -- concat->mtd.ecclayout = subdev[0]->ecclayout; -+ mtd_set_ooblayout(&concat->mtd, subdev[0]->ooblayout); - - concat->num_subdev = num_devs; - concat->mtd.name = name; ---- a/drivers/mtd/mtdcore.c -+++ b/drivers/mtd/mtdcore.c -@@ -32,6 +32,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -446,6 +447,7 @@ int add_mtd_device(struct mtd_info *mtd) - mtd->dev.devt = MTD_DEVT(i); - dev_set_name(&mtd->dev, "mtd%d", i); - dev_set_drvdata(&mtd->dev, mtd); -+ of_node_get(mtd_get_of_node(mtd)); - error = device_register(&mtd->dev); - if (error) - goto fail_added; -@@ -477,6 +479,7 @@ int add_mtd_device(struct mtd_info *mtd) - return 0; - - fail_added: -+ of_node_put(mtd_get_of_node(mtd)); - idr_remove(&mtd_idr, i); - fail_locked: - mutex_unlock(&mtd_table_mutex); -@@ -518,6 +521,7 @@ int del_mtd_device(struct mtd_info *mtd) - device_unregister(&mtd->dev); - - idr_remove(&mtd_idr, mtd->index); -+ of_node_put(mtd_get_of_node(mtd)); - - module_put(THIS_MODULE); - ret = 0; -@@ -529,9 +533,10 @@ out_error: - } - - static int mtd_add_device_partitions(struct mtd_info *mtd, -- struct mtd_partition *real_parts, -- int nbparts) -+ struct mtd_partitions *parts) - { -+ const struct mtd_partition *real_parts = parts->parts; -+ int nbparts = parts->nr_parts; - int ret; - - if (nbparts == 0 || IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER)) { -@@ -600,29 +605,29 @@ int mtd_device_parse_register(struct mtd - const struct mtd_partition *parts, - int nr_parts) - { -+ struct mtd_partitions parsed; - int ret; -- struct mtd_partition *real_parts = NULL; - - mtd_set_dev_defaults(mtd); - -- ret = parse_mtd_partitions(mtd, types, &real_parts, parser_data); -- if (ret <= 0 && nr_parts && parts) { -- real_parts = kmemdup(parts, sizeof(*parts) * nr_parts, -- GFP_KERNEL); -- if (!real_parts) -- ret = -ENOMEM; -- else -- ret = nr_parts; -- } -- /* Didn't come up with either parsed OR fallback partitions */ -- if (ret < 0) { -- pr_info("mtd: failed to find partitions; one or more parsers reports errors (%d)\n", -+ memset(&parsed, 0, sizeof(parsed)); -+ -+ ret = parse_mtd_partitions(mtd, types, &parsed, parser_data); -+ if ((ret < 0 || parsed.nr_parts == 0) && parts && nr_parts) { -+ /* Fall back to driver-provided partitions */ -+ parsed = (struct mtd_partitions){ -+ .parts = parts, -+ .nr_parts = nr_parts, -+ }; -+ } else if (ret < 0) { -+ /* Didn't come up with parsed OR fallback partitions */ -+ pr_info("mtd: failed to find partitions; one or more parsers reports errors (%d)\n", - ret); - /* Don't abort on errors; we can still use unpartitioned MTD */ -- ret = 0; -+ memset(&parsed, 0, sizeof(parsed)); - } - -- ret = mtd_add_device_partitions(mtd, real_parts, ret); -+ ret = mtd_add_device_partitions(mtd, &parsed); - if (ret) - goto out; - -@@ -642,7 +647,8 @@ int mtd_device_parse_register(struct mtd - } - - out: -- kfree(real_parts); -+ /* Cleanup any parsed partitions */ -+ mtd_part_parser_cleanup(&parsed); - return ret; - } - EXPORT_SYMBOL_GPL(mtd_device_parse_register); -@@ -767,7 +773,6 @@ out: - } - EXPORT_SYMBOL_GPL(get_mtd_device); - -- - int __get_mtd_device(struct mtd_info *mtd) - { - int err; -@@ -1001,6 +1006,366 @@ int mtd_read_oob(struct mtd_info *mtd, l - } - EXPORT_SYMBOL_GPL(mtd_read_oob); - -+/** -+ * mtd_ooblayout_ecc - Get the OOB region definition of a specific ECC section -+ * @mtd: MTD device structure -+ * @section: ECC section. Depending on the layout you may have all the ECC -+ * bytes stored in a single contiguous section, or one section -+ * per ECC chunk (and sometime several sections for a single ECC -+ * ECC chunk) -+ * @oobecc: OOB region struct filled with the appropriate ECC position -+ * information -+ * -+ * This functions return ECC section information in the OOB area. I you want -+ * to get all the ECC bytes information, then you should call -+ * mtd_ooblayout_ecc(mtd, section++, oobecc) until it returns -ERANGE. -+ * -+ * Returns zero on success, a negative error code otherwise. -+ */ -+int mtd_ooblayout_ecc(struct mtd_info *mtd, int section, -+ struct mtd_oob_region *oobecc) -+{ -+ memset(oobecc, 0, sizeof(*oobecc)); -+ -+ if (!mtd || section < 0) -+ return -EINVAL; -+ -+ if (!mtd->ooblayout || !mtd->ooblayout->ecc) -+ return -ENOTSUPP; -+ -+ return mtd->ooblayout->ecc(mtd, section, oobecc); -+} -+EXPORT_SYMBOL_GPL(mtd_ooblayout_ecc); -+ -+/** -+ * mtd_ooblayout_free - Get the OOB region definition of a specific free -+ * section -+ * @mtd: MTD device structure -+ * @section: Free section you are interested in. Depending on the layout -+ * you may have all the free bytes stored in a single contiguous -+ * section, or one section per ECC chunk plus an extra section -+ * for the remaining bytes (or other funky layout). -+ * @oobfree: OOB region struct filled with the appropriate free position -+ * information -+ * -+ * This functions return free bytes position in the OOB area. I you want -+ * to get all the free bytes information, then you should call -+ * mtd_ooblayout_free(mtd, section++, oobfree) until it returns -ERANGE. -+ * -+ * Returns zero on success, a negative error code otherwise. -+ */ -+int mtd_ooblayout_free(struct mtd_info *mtd, int section, -+ struct mtd_oob_region *oobfree) -+{ -+ memset(oobfree, 0, sizeof(*oobfree)); -+ -+ if (!mtd || section < 0) -+ return -EINVAL; -+ -+ if (!mtd->ooblayout || !mtd->ooblayout->free) -+ return -ENOTSUPP; -+ -+ return mtd->ooblayout->free(mtd, section, oobfree); -+} -+EXPORT_SYMBOL_GPL(mtd_ooblayout_free); -+ -+/** -+ * mtd_ooblayout_find_region - Find the region attached to a specific byte -+ * @mtd: mtd info structure -+ * @byte: the byte we are searching for -+ * @sectionp: pointer where the section id will be stored -+ * @oobregion: used to retrieve the ECC position -+ * @iter: iterator function. Should be either mtd_ooblayout_free or -+ * mtd_ooblayout_ecc depending on the region type you're searching for -+ * -+ * This functions returns the section id and oobregion information of a -+ * specific byte. For example, say you want to know where the 4th ECC byte is -+ * stored, you'll use: -+ * -+ * mtd_ooblayout_find_region(mtd, 3, §ion, &oobregion, mtd_ooblayout_ecc); -+ * -+ * Returns zero on success, a negative error code otherwise. -+ */ -+static int mtd_ooblayout_find_region(struct mtd_info *mtd, int byte, -+ int *sectionp, struct mtd_oob_region *oobregion, -+ int (*iter)(struct mtd_info *, -+ int section, -+ struct mtd_oob_region *oobregion)) -+{ -+ int pos = 0, ret, section = 0; -+ -+ memset(oobregion, 0, sizeof(*oobregion)); -+ -+ while (1) { -+ ret = iter(mtd, section, oobregion); -+ if (ret) -+ return ret; -+ -+ if (pos + oobregion->length > byte) -+ break; -+ -+ pos += oobregion->length; -+ section++; -+ } -+ -+ /* -+ * Adjust region info to make it start at the beginning at the -+ * 'start' ECC byte. -+ */ -+ oobregion->offset += byte - pos; -+ oobregion->length -= byte - pos; -+ *sectionp = section; -+ -+ return 0; -+} -+ -+/** -+ * mtd_ooblayout_find_eccregion - Find the ECC region attached to a specific -+ * ECC byte -+ * @mtd: mtd info structure -+ * @eccbyte: the byte we are searching for -+ * @sectionp: pointer where the section id will be stored -+ * @oobregion: OOB region information -+ * -+ * Works like mtd_ooblayout_find_region() except it searches for a specific ECC -+ * byte. -+ * -+ * Returns zero on success, a negative error code otherwise. -+ */ -+int mtd_ooblayout_find_eccregion(struct mtd_info *mtd, int eccbyte, -+ int *section, -+ struct mtd_oob_region *oobregion) -+{ -+ return mtd_ooblayout_find_region(mtd, eccbyte, section, oobregion, -+ mtd_ooblayout_ecc); -+} -+EXPORT_SYMBOL_GPL(mtd_ooblayout_find_eccregion); -+ -+/** -+ * mtd_ooblayout_get_bytes - Extract OOB bytes from the oob buffer -+ * @mtd: mtd info structure -+ * @buf: destination buffer to store OOB bytes -+ * @oobbuf: OOB buffer -+ * @start: first byte to retrieve -+ * @nbytes: number of bytes to retrieve -+ * @iter: section iterator -+ * -+ * Extract bytes attached to a specific category (ECC or free) -+ * from the OOB buffer and copy them into buf. -+ * -+ * Returns zero on success, a negative error code otherwise. -+ */ -+static int mtd_ooblayout_get_bytes(struct mtd_info *mtd, u8 *buf, -+ const u8 *oobbuf, int start, int nbytes, -+ int (*iter)(struct mtd_info *, -+ int section, -+ struct mtd_oob_region *oobregion)) -+{ -+ struct mtd_oob_region oobregion = { }; -+ int section = 0, ret; -+ -+ ret = mtd_ooblayout_find_region(mtd, start, §ion, -+ &oobregion, iter); -+ -+ while (!ret) { -+ int cnt; -+ -+ cnt = oobregion.length > nbytes ? nbytes : oobregion.length; -+ memcpy(buf, oobbuf + oobregion.offset, cnt); -+ buf += cnt; -+ nbytes -= cnt; -+ -+ if (!nbytes) -+ break; -+ -+ ret = iter(mtd, ++section, &oobregion); -+ } -+ -+ return ret; -+} -+ -+/** -+ * mtd_ooblayout_set_bytes - put OOB bytes into the oob buffer -+ * @mtd: mtd info structure -+ * @buf: source buffer to get OOB bytes from -+ * @oobbuf: OOB buffer -+ * @start: first OOB byte to set -+ * @nbytes: number of OOB bytes to set -+ * @iter: section iterator -+ * -+ * Fill the OOB buffer with data provided in buf. The category (ECC or free) -+ * is selected by passing the appropriate iterator. -+ * -+ * Returns zero on success, a negative error code otherwise. -+ */ -+static int mtd_ooblayout_set_bytes(struct mtd_info *mtd, const u8 *buf, -+ u8 *oobbuf, int start, int nbytes, -+ int (*iter)(struct mtd_info *, -+ int section, -+ struct mtd_oob_region *oobregion)) -+{ -+ struct mtd_oob_region oobregion = { }; -+ int section = 0, ret; -+ -+ ret = mtd_ooblayout_find_region(mtd, start, §ion, -+ &oobregion, iter); -+ -+ while (!ret) { -+ int cnt; -+ -+ cnt = oobregion.length > nbytes ? nbytes : oobregion.length; -+ memcpy(oobbuf + oobregion.offset, buf, cnt); -+ buf += cnt; -+ nbytes -= cnt; -+ -+ if (!nbytes) -+ break; -+ -+ ret = iter(mtd, ++section, &oobregion); -+ } -+ -+ return ret; -+} -+ -+/** -+ * mtd_ooblayout_count_bytes - count the number of bytes in a OOB category -+ * @mtd: mtd info structure -+ * @iter: category iterator -+ * -+ * Count the number of bytes in a given category. -+ * -+ * Returns a positive value on success, a negative error code otherwise. -+ */ -+static int mtd_ooblayout_count_bytes(struct mtd_info *mtd, -+ int (*iter)(struct mtd_info *, -+ int section, -+ struct mtd_oob_region *oobregion)) -+{ -+ struct mtd_oob_region oobregion = { }; -+ int section = 0, ret, nbytes = 0; -+ -+ while (1) { -+ ret = iter(mtd, section++, &oobregion); -+ if (ret) { -+ if (ret == -ERANGE) -+ ret = nbytes; -+ break; -+ } -+ -+ nbytes += oobregion.length; -+ } -+ -+ return ret; -+} -+ -+/** -+ * mtd_ooblayout_get_eccbytes - extract ECC bytes from the oob buffer -+ * @mtd: mtd info structure -+ * @eccbuf: destination buffer to store ECC bytes -+ * @oobbuf: OOB buffer -+ * @start: first ECC byte to retrieve -+ * @nbytes: number of ECC bytes to retrieve -+ * -+ * Works like mtd_ooblayout_get_bytes(), except it acts on ECC bytes. -+ * -+ * Returns zero on success, a negative error code otherwise. -+ */ -+int mtd_ooblayout_get_eccbytes(struct mtd_info *mtd, u8 *eccbuf, -+ const u8 *oobbuf, int start, int nbytes) -+{ -+ return mtd_ooblayout_get_bytes(mtd, eccbuf, oobbuf, start, nbytes, -+ mtd_ooblayout_ecc); -+} -+EXPORT_SYMBOL_GPL(mtd_ooblayout_get_eccbytes); -+ -+/** -+ * mtd_ooblayout_set_eccbytes - set ECC bytes into the oob buffer -+ * @mtd: mtd info structure -+ * @eccbuf: source buffer to get ECC bytes from -+ * @oobbuf: OOB buffer -+ * @start: first ECC byte to set -+ * @nbytes: number of ECC bytes to set -+ * -+ * Works like mtd_ooblayout_set_bytes(), except it acts on ECC bytes. -+ * -+ * Returns zero on success, a negative error code otherwise. -+ */ -+int mtd_ooblayout_set_eccbytes(struct mtd_info *mtd, const u8 *eccbuf, -+ u8 *oobbuf, int start, int nbytes) -+{ -+ return mtd_ooblayout_set_bytes(mtd, eccbuf, oobbuf, start, nbytes, -+ mtd_ooblayout_ecc); -+} -+EXPORT_SYMBOL_GPL(mtd_ooblayout_set_eccbytes); -+ -+/** -+ * mtd_ooblayout_get_databytes - extract data bytes from the oob buffer -+ * @mtd: mtd info structure -+ * @databuf: destination buffer to store ECC bytes -+ * @oobbuf: OOB buffer -+ * @start: first ECC byte to retrieve -+ * @nbytes: number of ECC bytes to retrieve -+ * -+ * Works like mtd_ooblayout_get_bytes(), except it acts on free bytes. -+ * -+ * Returns zero on success, a negative error code otherwise. -+ */ -+int mtd_ooblayout_get_databytes(struct mtd_info *mtd, u8 *databuf, -+ const u8 *oobbuf, int start, int nbytes) -+{ -+ return mtd_ooblayout_get_bytes(mtd, databuf, oobbuf, start, nbytes, -+ mtd_ooblayout_free); -+} -+EXPORT_SYMBOL_GPL(mtd_ooblayout_get_databytes); -+ -+/** -+ * mtd_ooblayout_get_eccbytes - set data bytes into the oob buffer -+ * @mtd: mtd info structure -+ * @eccbuf: source buffer to get data bytes from -+ * @oobbuf: OOB buffer -+ * @start: first ECC byte to set -+ * @nbytes: number of ECC bytes to set -+ * -+ * Works like mtd_ooblayout_get_bytes(), except it acts on free bytes. -+ * -+ * Returns zero on success, a negative error code otherwise. -+ */ -+int mtd_ooblayout_set_databytes(struct mtd_info *mtd, const u8 *databuf, -+ u8 *oobbuf, int start, int nbytes) -+{ -+ return mtd_ooblayout_set_bytes(mtd, databuf, oobbuf, start, nbytes, -+ mtd_ooblayout_free); -+} -+EXPORT_SYMBOL_GPL(mtd_ooblayout_set_databytes); -+ -+/** -+ * mtd_ooblayout_count_freebytes - count the number of free bytes in OOB -+ * @mtd: mtd info structure -+ * -+ * Works like mtd_ooblayout_count_bytes(), except it count free bytes. -+ * -+ * Returns zero on success, a negative error code otherwise. -+ */ -+int mtd_ooblayout_count_freebytes(struct mtd_info *mtd) -+{ -+ return mtd_ooblayout_count_bytes(mtd, mtd_ooblayout_free); -+} -+EXPORT_SYMBOL_GPL(mtd_ooblayout_count_freebytes); -+ -+/** -+ * mtd_ooblayout_count_freebytes - count the number of ECC bytes in OOB -+ * @mtd: mtd info structure -+ * -+ * Works like mtd_ooblayout_count_bytes(), except it count ECC bytes. -+ * -+ * Returns zero on success, a negative error code otherwise. -+ */ -+int mtd_ooblayout_count_eccbytes(struct mtd_info *mtd) -+{ -+ return mtd_ooblayout_count_bytes(mtd, mtd_ooblayout_ecc); -+} -+EXPORT_SYMBOL_GPL(mtd_ooblayout_count_eccbytes); -+ - /* - * Method to access the protection register area, present in some flash - * devices. The user data is one time programmable but the factory data is read ---- a/drivers/mtd/mtdcore.h -+++ b/drivers/mtd/mtdcore.h -@@ -10,10 +10,15 @@ int add_mtd_device(struct mtd_info *mtd) - int del_mtd_device(struct mtd_info *mtd); - int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int); - int del_mtd_partitions(struct mtd_info *); -+ -+struct mtd_partitions; -+ - int parse_mtd_partitions(struct mtd_info *master, const char * const *types, -- struct mtd_partition **pparts, -+ struct mtd_partitions *pparts, - struct mtd_part_parser_data *data); - -+void mtd_part_parser_cleanup(struct mtd_partitions *parts); -+ - int __init init_mtdchar(void); - void __exit cleanup_mtdchar(void); - ---- a/drivers/mtd/mtdpart.c -+++ b/drivers/mtd/mtdpart.c -@@ -55,9 +55,12 @@ static void mtd_partition_split(struct m - - /* - * Given a pointer to the MTD object in the mtd_part structure, we can retrieve -- * the pointer to that structure with this macro. -+ * the pointer to that structure. - */ --#define PART(x) ((struct mtd_part *)(x)) -+static inline struct mtd_part *mtd_to_part(const struct mtd_info *mtd) -+{ -+ return container_of(mtd, struct mtd_part, mtd); -+} - - - /* -@@ -68,7 +71,7 @@ static void mtd_partition_split(struct m - static int part_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf) - { -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - struct mtd_ecc_stats stats; - int res; - -@@ -87,7 +90,7 @@ static int part_read(struct mtd_info *mt - static int part_point(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, void **virt, resource_size_t *phys) - { -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - - return part->master->_point(part->master, from + part->offset, len, - retlen, virt, phys); -@@ -95,7 +98,7 @@ static int part_point(struct mtd_info *m - - static int part_unpoint(struct mtd_info *mtd, loff_t from, size_t len) - { -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - - return part->master->_unpoint(part->master, from + part->offset, len); - } -@@ -105,7 +108,7 @@ static unsigned long part_get_unmapped_a - unsigned long offset, - unsigned long flags) - { -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - - offset += part->offset; - return part->master->_get_unmapped_area(part->master, len, offset, -@@ -115,7 +118,7 @@ static unsigned long part_get_unmapped_a - static int part_read_oob(struct mtd_info *mtd, loff_t from, - struct mtd_oob_ops *ops) - { -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - int res; - - if (from >= mtd->size) -@@ -130,10 +133,7 @@ static int part_read_oob(struct mtd_info - if (ops->oobbuf) { - size_t len, pages; - -- if (ops->mode == MTD_OPS_AUTO_OOB) -- len = mtd->oobavail; -- else -- len = mtd->oobsize; -+ len = mtd_oobavail(mtd, ops); - pages = mtd_div_by_ws(mtd->size, mtd); - pages -= mtd_div_by_ws(from, mtd); - if (ops->ooboffs + ops->ooblen > pages * len) -@@ -153,7 +153,7 @@ static int part_read_oob(struct mtd_info - static int part_read_user_prot_reg(struct mtd_info *mtd, loff_t from, - size_t len, size_t *retlen, u_char *buf) - { -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - return part->master->_read_user_prot_reg(part->master, from, len, - retlen, buf); - } -@@ -161,7 +161,7 @@ static int part_read_user_prot_reg(struc - static int part_get_user_prot_info(struct mtd_info *mtd, size_t len, - size_t *retlen, struct otp_info *buf) - { -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - return part->master->_get_user_prot_info(part->master, len, retlen, - buf); - } -@@ -169,7 +169,7 @@ static int part_get_user_prot_info(struc - static int part_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, - size_t len, size_t *retlen, u_char *buf) - { -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - return part->master->_read_fact_prot_reg(part->master, from, len, - retlen, buf); - } -@@ -177,7 +177,7 @@ static int part_read_fact_prot_reg(struc - static int part_get_fact_prot_info(struct mtd_info *mtd, size_t len, - size_t *retlen, struct otp_info *buf) - { -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - return part->master->_get_fact_prot_info(part->master, len, retlen, - buf); - } -@@ -185,7 +185,7 @@ static int part_get_fact_prot_info(struc - static int part_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) - { -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - return part->master->_write(part->master, to + part->offset, len, - retlen, buf); - } -@@ -193,7 +193,7 @@ static int part_write(struct mtd_info *m - static int part_panic_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) - { -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - return part->master->_panic_write(part->master, to + part->offset, len, - retlen, buf); - } -@@ -201,7 +201,7 @@ static int part_panic_write(struct mtd_i - static int part_write_oob(struct mtd_info *mtd, loff_t to, - struct mtd_oob_ops *ops) - { -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - - if (to >= mtd->size) - return -EINVAL; -@@ -213,7 +213,7 @@ static int part_write_oob(struct mtd_inf - static int part_write_user_prot_reg(struct mtd_info *mtd, loff_t from, - size_t len, size_t *retlen, u_char *buf) - { -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - return part->master->_write_user_prot_reg(part->master, from, len, - retlen, buf); - } -@@ -221,21 +221,21 @@ static int part_write_user_prot_reg(stru - static int part_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, - size_t len) - { -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - return part->master->_lock_user_prot_reg(part->master, from, len); - } - - static int part_writev(struct mtd_info *mtd, const struct kvec *vecs, - unsigned long count, loff_t to, size_t *retlen) - { -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - return part->master->_writev(part->master, vecs, count, - to + part->offset, retlen); - } - - static int part_erase(struct mtd_info *mtd, struct erase_info *instr) - { -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - int ret; - - -@@ -299,7 +299,7 @@ static int part_erase(struct mtd_info *m - void mtd_erase_callback(struct erase_info *instr) - { - if (instr->mtd->_erase == part_erase) { -- struct mtd_part *part = PART(instr->mtd); -+ struct mtd_part *part = mtd_to_part(instr->mtd); - size_t wrlen = 0; - - if (instr->mtd->flags & MTD_ERASE_PARTIAL) { -@@ -330,13 +330,13 @@ EXPORT_SYMBOL_GPL(mtd_erase_callback); - - static int part_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) - { -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - return part->master->_lock(part->master, ofs + part->offset, len); - } - - static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) - { -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - - ofs += part->offset; - if (mtd->flags & MTD_ERASE_PARTIAL) { -@@ -349,45 +349,45 @@ static int part_unlock(struct mtd_info * - - static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) - { -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - return part->master->_is_locked(part->master, ofs + part->offset, len); - } - - static void part_sync(struct mtd_info *mtd) - { -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - part->master->_sync(part->master); - } - - static int part_suspend(struct mtd_info *mtd) - { -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - return part->master->_suspend(part->master); - } - - static void part_resume(struct mtd_info *mtd) - { -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - part->master->_resume(part->master); - } - - static int part_block_isreserved(struct mtd_info *mtd, loff_t ofs) - { -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - ofs += part->offset; - return part->master->_block_isreserved(part->master, ofs); - } - - static int part_block_isbad(struct mtd_info *mtd, loff_t ofs) - { -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - ofs += part->offset; - return part->master->_block_isbad(part->master, ofs); - } - - static int part_block_markbad(struct mtd_info *mtd, loff_t ofs) - { -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - int res; - - ofs += part->offset; -@@ -397,6 +397,27 @@ static int part_block_markbad(struct mtd - return res; - } - -+static int part_ooblayout_ecc(struct mtd_info *mtd, int section, -+ struct mtd_oob_region *oobregion) -+{ -+ struct mtd_part *part = mtd_to_part(mtd); -+ -+ return mtd_ooblayout_ecc(part->master, section, oobregion); -+} -+ -+static int part_ooblayout_free(struct mtd_info *mtd, int section, -+ struct mtd_oob_region *oobregion) -+{ -+ struct mtd_part *part = mtd_to_part(mtd); -+ -+ return mtd_ooblayout_free(part->master, section, oobregion); -+} -+ -+static const struct mtd_ooblayout_ops part_ooblayout_ops = { -+ .ecc = part_ooblayout_ecc, -+ .free = part_ooblayout_free, -+}; -+ - static inline void free_partition(struct mtd_part *p) - { - kfree(p->mtd.name); -@@ -614,7 +635,7 @@ static struct mtd_part *allocate_partiti - slave->mtd.erasesize = slave->mtd.size; - } - -- slave->mtd.ecclayout = master->ecclayout; -+ mtd_set_ooblayout(&slave->mtd, &part_ooblayout_ops); - slave->mtd.ecc_step_size = master->ecc_step_size; - slave->mtd.ecc_strength = master->ecc_strength; - slave->mtd.bitflip_threshold = master->bitflip_threshold; -@@ -639,7 +660,7 @@ static ssize_t mtd_partition_offset_show - struct device_attribute *attr, char *buf) - { - struct mtd_info *mtd = dev_get_drvdata(dev); -- struct mtd_part *part = PART(mtd); -+ struct mtd_part *part = mtd_to_part(mtd); - return snprintf(buf, PAGE_SIZE, "%lld\n", part->offset); - } - -@@ -677,11 +698,10 @@ int mtd_add_partition(struct mtd_info *m - if (length <= 0) - return -EINVAL; - -+ memset(&part, 0, sizeof(part)); - part.name = name; - part.size = length; - part.offset = offset; -- part.mask_flags = 0; -- part.ecclayout = NULL; - - new = allocate_partition(master, &part, -1, offset); - if (IS_ERR(new)) -@@ -845,7 +865,7 @@ int add_mtd_partitions(struct mtd_info * - static DEFINE_SPINLOCK(part_parser_lock); - static LIST_HEAD(part_parsers); - --static struct mtd_part_parser *get_partition_parser(const char *name) -+static struct mtd_part_parser *mtd_part_parser_get(const char *name) - { - struct mtd_part_parser *p, *ret = NULL; - -@@ -862,7 +882,20 @@ static struct mtd_part_parser *get_parti - return ret; - } - --#define put_partition_parser(p) do { module_put((p)->owner); } while (0) -+static inline void mtd_part_parser_put(const struct mtd_part_parser *p) -+{ -+ module_put(p->owner); -+} -+ -+/* -+ * Many partition parsers just expected the core to kfree() all their data in -+ * one chunk. Do that by default. -+ */ -+static void mtd_part_parser_cleanup_default(const struct mtd_partition *pparts, -+ int nr_parts) -+{ -+ kfree(pparts); -+} - - static struct mtd_part_parser * - get_partition_parser_by_type(enum mtd_parser_type type, -@@ -874,7 +907,7 @@ get_partition_parser_by_type(enum mtd_pa - - p = list_prepare_entry(start, &part_parsers, list); - if (start) -- put_partition_parser(start); -+ mtd_part_parser_put(start); - - list_for_each_entry_continue(p, &part_parsers, list) { - if (p->type == type && try_module_get(p->owner)) { -@@ -888,13 +921,19 @@ get_partition_parser_by_type(enum mtd_pa - return ret; - } - --void register_mtd_parser(struct mtd_part_parser *p) --{ -+int __register_mtd_parser(struct mtd_part_parser *p, struct module *owner) -+ { -+ p->owner = owner; -+ -+ if (!p->cleanup) -+ p->cleanup = &mtd_part_parser_cleanup_default; -+ - spin_lock(&part_parser_lock); - list_add(&p->list, &part_parsers); - spin_unlock(&part_parser_lock); -+ return 0; - } --EXPORT_SYMBOL_GPL(register_mtd_parser); -+EXPORT_SYMBOL_GPL(__register_mtd_parser); - - void deregister_mtd_parser(struct mtd_part_parser *p) - { -@@ -954,7 +993,7 @@ static const char * const default_mtd_pa - * parse_mtd_partitions - parse MTD partitions - * @master: the master partition (describes whole MTD device) - * @types: names of partition parsers to try or %NULL -- * @pparts: array of partitions found is returned here -+ * @pparts: info about partitions found is returned here - * @data: MTD partition parser-specific data - * - * This function tries to find partition on MTD device @master. It uses MTD -@@ -966,45 +1005,42 @@ static const char * const default_mtd_pa - * - * This function may return: - * o a negative error code in case of failure -- * o zero if no partitions were found -- * o a positive number of found partitions, in which case on exit @pparts will -- * point to an array containing this number of &struct mtd_info objects. -+ * o zero otherwise, and @pparts will describe the partitions, number of -+ * partitions, and the parser which parsed them. Caller must release -+ * resources with mtd_part_parser_cleanup() when finished with the returned -+ * data. - */ - int parse_mtd_partitions(struct mtd_info *master, const char *const *types, -- struct mtd_partition **pparts, -+ struct mtd_partitions *pparts, - struct mtd_part_parser_data *data) - { - struct mtd_part_parser *parser; - int ret, err = 0; - const char *const *types_of = NULL; - -- if (data && data->of_node) { -- types_of = of_get_probes(data->of_node); -- if (types_of != NULL) -- types = types_of; -- } -- - if (!types) - types = default_mtd_part_types; - - for ( ; *types; types++) { - pr_debug("%s: parsing partitions %s\n", master->name, *types); -- parser = get_partition_parser(*types); -+ parser = mtd_part_parser_get(*types); - if (!parser && !request_module("%s", *types)) -- parser = get_partition_parser(*types); -+ parser = mtd_part_parser_get(*types); - pr_debug("%s: got parser %s\n", master->name, - parser ? parser->name : NULL); - if (!parser) - continue; -- ret = (*parser->parse_fn)(master, pparts, data); -+ ret = (*parser->parse_fn)(master, &pparts->parts, data); - pr_debug("%s: parser %s: %i\n", - master->name, parser->name, ret); -- put_partition_parser(parser); - if (ret > 0) { - printk(KERN_NOTICE "%d %s partitions found on MTD device %s\n", - ret, parser->name, master->name); -- return ret; -+ pparts->nr_parts = ret; -+ pparts->parser = parser; -+ return 0; - } -+ mtd_part_parser_put(parser); - /* - * Stash the first error we see; only report it if no parser - * succeeds -@@ -1034,7 +1070,7 @@ int parse_mtd_partitions_by_type(struct - ret = (*parser->parse_fn)(master, pparts, data); - - if (ret > 0) { -- put_partition_parser(parser); -+ mtd_part_parser_put(parser); - printk(KERN_NOTICE - "%d %s partitions found on MTD device %s\n", - ret, parser->name, master->name); -@@ -1048,6 +1084,22 @@ int parse_mtd_partitions_by_type(struct - } - EXPORT_SYMBOL_GPL(parse_mtd_partitions_by_type); - -+void mtd_part_parser_cleanup(struct mtd_partitions *parts) -+{ -+ const struct mtd_part_parser *parser; -+ -+ if (!parts) -+ return; -+ -+ parser = parts->parser; -+ if (parser) { -+ if (parser->cleanup) -+ parser->cleanup(parts->parts, parts->nr_parts); -+ -+ mtd_part_parser_put(parser); -+ } -+} -+ - int mtd_is_partition(const struct mtd_info *mtd) - { - struct mtd_part *part; -@@ -1070,7 +1122,7 @@ struct mtd_info *mtdpart_get_master(cons - if (!mtd_is_partition(mtd)) - return (struct mtd_info *)mtd; - -- return PART(mtd)->master; -+ return mtd_to_part(mtd)->master; - } - EXPORT_SYMBOL_GPL(mtdpart_get_master); - -@@ -1079,7 +1131,7 @@ uint64_t mtdpart_get_offset(const struct - if (!mtd_is_partition(mtd)) - return 0; - -- return PART(mtd)->offset; -+ return mtd_to_part(mtd)->offset; - } - EXPORT_SYMBOL_GPL(mtdpart_get_offset); - -@@ -1089,6 +1141,6 @@ uint64_t mtd_get_device_size(const struc - if (!mtd_is_partition(mtd)) - return mtd->size; - -- return PART(mtd)->master->size; -+ return mtd_to_part(mtd)->master->size; - } - EXPORT_SYMBOL_GPL(mtd_get_device_size); ---- a/drivers/mtd/mtdswap.c -+++ b/drivers/mtd/mtdswap.c -@@ -346,7 +346,7 @@ static int mtdswap_read_markers(struct m - if (mtd_can_have_bb(d->mtd) && mtd_block_isbad(d->mtd, offset)) - return MTDSWAP_SCANNED_BAD; - -- ops.ooblen = 2 * d->mtd->ecclayout->oobavail; -+ ops.ooblen = 2 * d->mtd->oobavail; - ops.oobbuf = d->oob_buf; - ops.ooboffs = 0; - ops.datbuf = NULL; -@@ -359,7 +359,7 @@ static int mtdswap_read_markers(struct m - - data = (struct mtdswap_oobdata *)d->oob_buf; - data2 = (struct mtdswap_oobdata *) -- (d->oob_buf + d->mtd->ecclayout->oobavail); -+ (d->oob_buf + d->mtd->oobavail); - - if (le16_to_cpu(data->magic) == MTDSWAP_MAGIC_CLEAN) { - eb->erase_count = le32_to_cpu(data->count); -@@ -933,7 +933,7 @@ static unsigned int mtdswap_eblk_passes( - - ops.mode = MTD_OPS_AUTO_OOB; - ops.len = mtd->writesize; -- ops.ooblen = mtd->ecclayout->oobavail; -+ ops.ooblen = mtd->oobavail; - ops.ooboffs = 0; - ops.datbuf = d->page_buf; - ops.oobbuf = d->oob_buf; -@@ -945,7 +945,7 @@ static unsigned int mtdswap_eblk_passes( - for (i = 0; i < mtd_pages; i++) { - patt = mtdswap_test_patt(test + i); - memset(d->page_buf, patt, mtd->writesize); -- memset(d->oob_buf, patt, mtd->ecclayout->oobavail); -+ memset(d->oob_buf, patt, mtd->oobavail); - ret = mtd_write_oob(mtd, pos, &ops); - if (ret) - goto error; -@@ -964,7 +964,7 @@ static unsigned int mtdswap_eblk_passes( - if (p1[j] != patt) - goto error; - -- for (j = 0; j < mtd->ecclayout->oobavail; j++) -+ for (j = 0; j < mtd->oobavail; j++) - if (p2[j] != (unsigned char)patt) - goto error; - -@@ -1387,7 +1387,7 @@ static int mtdswap_init(struct mtdswap_d - if (!d->page_buf) - goto page_buf_fail; - -- d->oob_buf = kmalloc(2 * mtd->ecclayout->oobavail, GFP_KERNEL); -+ d->oob_buf = kmalloc(2 * mtd->oobavail, GFP_KERNEL); - if (!d->oob_buf) - goto oob_buf_fail; - -@@ -1417,7 +1417,6 @@ static void mtdswap_add_mtd(struct mtd_b - unsigned long part; - unsigned int eblocks, eavailable, bad_blocks, spare_cnt; - uint64_t swap_size, use_size, size_limit; -- struct nand_ecclayout *oinfo; - int ret; - - parts = &partitions[0]; -@@ -1447,17 +1446,10 @@ static void mtdswap_add_mtd(struct mtd_b - return; - } - -- oinfo = mtd->ecclayout; -- if (!oinfo) { -- printk(KERN_ERR "%s: mtd%d does not have OOB\n", -- MTDSWAP_PREFIX, mtd->index); -- return; -- } -- -- if (!mtd->oobsize || oinfo->oobavail < MTDSWAP_OOBSIZE) { -+ if (!mtd->oobsize || mtd->oobavail < MTDSWAP_OOBSIZE) { - printk(KERN_ERR "%s: Not enough free bytes in OOB, " - "%d available, %zu needed.\n", -- MTDSWAP_PREFIX, oinfo->oobavail, MTDSWAP_OOBSIZE); -+ MTDSWAP_PREFIX, mtd->oobavail, MTDSWAP_OOBSIZE); - return; - } - ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -55,7 +55,7 @@ config MTD_NAND_DENALI_PCI - config MTD_NAND_DENALI_DT - tristate "Support Denali NAND controller as a DT device" - select MTD_NAND_DENALI -- depends on HAS_DMA && HAVE_CLK -+ depends on HAS_DMA && HAVE_CLK && OF - help - Enable the driver for NAND flash on platforms using a Denali NAND - controller as a DT device. -@@ -74,6 +74,7 @@ config MTD_NAND_DENALI_SCRATCH_REG_ADDR - config MTD_NAND_GPIO - tristate "GPIO assisted NAND Flash driver" - depends on GPIOLIB || COMPILE_TEST -+ depends on HAS_IOMEM - help - This enables a NAND flash driver where control signals are - connected to GPIO pins, and commands and data are communicated -@@ -310,6 +311,7 @@ config MTD_NAND_CAFE - config MTD_NAND_CS553X - tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)" - depends on X86_32 -+ depends on !UML && HAS_IOMEM - help - The CS553x companion chips for the AMD Geode processor - include NAND flash controllers with built-in hardware ECC -@@ -463,6 +465,7 @@ config MTD_NAND_MPC5121_NFC - config MTD_NAND_VF610_NFC - tristate "Support for Freescale NFC for VF610/MPC5125" - depends on (SOC_VF610 || COMPILE_TEST) -+ depends on HAS_IOMEM - help - Enables support for NAND Flash Controller on some Freescale - processors like the VF610, MPC5125, MCF54418 or Kinetis K70. -@@ -480,7 +483,7 @@ config MTD_NAND_MXC - - config MTD_NAND_SH_FLCTL - tristate "Support for NAND on Renesas SuperH FLCTL" -- depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST -+ depends on SUPERH || COMPILE_TEST - depends on HAS_IOMEM - depends on HAS_DMA - help -@@ -519,6 +522,13 @@ config MTD_NAND_JZ4740 - help - Enables support for NAND Flash on JZ4740 SoC based boards. - -+config MTD_NAND_JZ4780 -+ tristate "Support for NAND on JZ4780 SoC" -+ depends on MACH_JZ4780 && JZ4780_NEMC -+ help -+ Enables support for NAND Flash connected to the NEMC on JZ4780 SoC -+ based boards, using the BCH controller for hardware error correction. -+ - config MTD_NAND_FSMC - tristate "Support for NAND on ST Micros FSMC" - depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300 -@@ -546,4 +556,11 @@ config MTD_NAND_HISI504 - help - Enables support for NAND controller on Hisilicon SoC Hip04. - -+config MTD_NAND_QCOM -+ tristate "Support for NAND on QCOM SoCs" -+ depends on ARCH_QCOM -+ help -+ Enables support for NAND flash chips on SoCs containing the EBI2 NAND -+ controller. This controller is found on IPQ806x SoC. -+ - endif # MTD_NAND ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -49,11 +49,13 @@ obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mp - obj-$(CONFIG_MTD_NAND_VF610_NFC) += vf610_nfc.o - obj-$(CONFIG_MTD_NAND_RICOH) += r852.o - obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o -+obj-$(CONFIG_MTD_NAND_JZ4780) += jz4780_nand.o jz4780_bch.o - obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/ - obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o - obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/ - obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_nand.o - obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o - obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/ -+obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o - - nand-objs := nand_base.o nand_bbt.o nand_timings.o ---- a/drivers/mtd/nand/nand_base.c -+++ b/drivers/mtd/nand/nand_base.c -@@ -48,50 +48,6 @@ - #include - #include - --/* Define default oob placement schemes for large and small page devices */ --static struct nand_ecclayout nand_oob_8 = { -- .eccbytes = 3, -- .eccpos = {0, 1, 2}, -- .oobfree = { -- {.offset = 3, -- .length = 2}, -- {.offset = 6, -- .length = 2} } --}; -- --static struct nand_ecclayout nand_oob_16 = { -- .eccbytes = 6, -- .eccpos = {0, 1, 2, 3, 6, 7}, -- .oobfree = { -- {.offset = 8, -- . length = 8} } --}; -- --static struct nand_ecclayout nand_oob_64 = { -- .eccbytes = 24, -- .eccpos = { -- 40, 41, 42, 43, 44, 45, 46, 47, -- 48, 49, 50, 51, 52, 53, 54, 55, -- 56, 57, 58, 59, 60, 61, 62, 63}, -- .oobfree = { -- {.offset = 2, -- .length = 38} } --}; -- --static struct nand_ecclayout nand_oob_128 = { -- .eccbytes = 48, -- .eccpos = { -- 80, 81, 82, 83, 84, 85, 86, 87, -- 88, 89, 90, 91, 92, 93, 94, 95, -- 96, 97, 98, 99, 100, 101, 102, 103, -- 104, 105, 106, 107, 108, 109, 110, 111, -- 112, 113, 114, 115, 116, 117, 118, 119, -- 120, 121, 122, 123, 124, 125, 126, 127}, -- .oobfree = { -- {.offset = 2, -- .length = 78} } --}; -- - static int nand_get_device(struct mtd_info *mtd, int new_state); - - static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, -@@ -103,10 +59,96 @@ static int nand_do_write_oob(struct mtd_ - */ - DEFINE_LED_TRIGGER(nand_led_trigger); - -+/* Define default oob placement schemes for large and small page devices */ -+static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section, -+ struct mtd_oob_region *oobregion) -+{ -+ struct nand_chip *chip = mtd_to_nand(mtd); -+ struct nand_ecc_ctrl *ecc = &chip->ecc; -+ -+ if (section > 1) -+ return -ERANGE; -+ -+ if (!section) { -+ oobregion->offset = 0; -+ oobregion->length = 4; -+ } else { -+ oobregion->offset = 6; -+ oobregion->length = ecc->total - 4; -+ } -+ -+ return 0; -+} -+ -+static int nand_ooblayout_free_sp(struct mtd_info *mtd, int section, -+ struct mtd_oob_region *oobregion) -+{ -+ if (section > 1) -+ return -ERANGE; -+ -+ if (mtd->oobsize == 16) { -+ if (section) -+ return -ERANGE; -+ -+ oobregion->length = 8; -+ oobregion->offset = 8; -+ } else { -+ oobregion->length = 2; -+ if (!section) -+ oobregion->offset = 3; -+ else -+ oobregion->offset = 6; -+ } -+ -+ return 0; -+} -+ -+const struct mtd_ooblayout_ops nand_ooblayout_sp_ops = { -+ .ecc = nand_ooblayout_ecc_sp, -+ .free = nand_ooblayout_free_sp, -+}; -+EXPORT_SYMBOL_GPL(nand_ooblayout_sp_ops); -+ -+static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section, -+ struct mtd_oob_region *oobregion) -+{ -+ struct nand_chip *chip = mtd_to_nand(mtd); -+ struct nand_ecc_ctrl *ecc = &chip->ecc; -+ -+ if (section) -+ return -ERANGE; -+ -+ oobregion->length = ecc->total; -+ oobregion->offset = mtd->oobsize - oobregion->length; -+ -+ return 0; -+} -+ -+static int nand_ooblayout_free_lp(struct mtd_info *mtd, int section, -+ struct mtd_oob_region *oobregion) -+{ -+ struct nand_chip *chip = mtd_to_nand(mtd); -+ struct nand_ecc_ctrl *ecc = &chip->ecc; -+ -+ if (section) -+ return -ERANGE; -+ -+ oobregion->length = mtd->oobsize - ecc->total - 2; -+ oobregion->offset = 2; -+ -+ return 0; -+} -+ -+const struct mtd_ooblayout_ops nand_ooblayout_lp_ops = { -+ .ecc = nand_ooblayout_ecc_lp, -+ .free = nand_ooblayout_free_lp, -+}; -+EXPORT_SYMBOL_GPL(nand_ooblayout_lp_ops); -+ - static int check_offs_len(struct mtd_info *mtd, - loff_t ofs, uint64_t len) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - int ret = 0; - - /* Start address must align on block boundary */ -@@ -132,7 +174,7 @@ static int check_offs_len(struct mtd_inf - */ - static void nand_release_device(struct mtd_info *mtd) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - - /* Release the controller and the chip */ - spin_lock(&chip->controller->lock); -@@ -150,7 +192,7 @@ static void nand_release_device(struct m - */ - static uint8_t nand_read_byte(struct mtd_info *mtd) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - return readb(chip->IO_ADDR_R); - } - -@@ -163,7 +205,7 @@ static uint8_t nand_read_byte(struct mtd - */ - static uint8_t nand_read_byte16(struct mtd_info *mtd) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - return (uint8_t) cpu_to_le16(readw(chip->IO_ADDR_R)); - } - -@@ -175,7 +217,7 @@ static uint8_t nand_read_byte16(struct m - */ - static u16 nand_read_word(struct mtd_info *mtd) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - return readw(chip->IO_ADDR_R); - } - -@@ -188,7 +230,7 @@ static u16 nand_read_word(struct mtd_inf - */ - static void nand_select_chip(struct mtd_info *mtd, int chipnr) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - - switch (chipnr) { - case -1: -@@ -211,7 +253,7 @@ static void nand_select_chip(struct mtd_ - */ - static void nand_write_byte(struct mtd_info *mtd, uint8_t byte) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - - chip->write_buf(mtd, &byte, 1); - } -@@ -225,7 +267,7 @@ static void nand_write_byte(struct mtd_i - */ - static void nand_write_byte16(struct mtd_info *mtd, uint8_t byte) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - uint16_t word = byte; - - /* -@@ -257,7 +299,7 @@ static void nand_write_byte16(struct mtd - */ - static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - - iowrite8_rep(chip->IO_ADDR_W, buf, len); - } -@@ -272,7 +314,7 @@ static void nand_write_buf(struct mtd_in - */ - static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - - ioread8_rep(chip->IO_ADDR_R, buf, len); - } -@@ -287,7 +329,7 @@ static void nand_read_buf(struct mtd_inf - */ - static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - u16 *p = (u16 *) buf; - - iowrite16_rep(chip->IO_ADDR_W, p, len >> 1); -@@ -303,7 +345,7 @@ static void nand_write_buf16(struct mtd_ - */ - static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - u16 *p = (u16 *) buf; - - ioread16_rep(chip->IO_ADDR_R, p, len >> 1); -@@ -313,14 +355,13 @@ static void nand_read_buf16(struct mtd_i - * nand_block_bad - [DEFAULT] Read bad block marker from the chip - * @mtd: MTD device structure - * @ofs: offset from device start -- * @getchip: 0, if the chip is already selected - * - * Check, if the block is bad. - */ --static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) -+static int nand_block_bad(struct mtd_info *mtd, loff_t ofs) - { -- int page, chipnr, res = 0, i = 0; -- struct nand_chip *chip = mtd->priv; -+ int page, res = 0, i = 0; -+ struct nand_chip *chip = mtd_to_nand(mtd); - u16 bad; - - if (chip->bbt_options & NAND_BBT_SCANLASTPAGE) -@@ -328,15 +369,6 @@ static int nand_block_bad(struct mtd_inf - - page = (int)(ofs >> chip->page_shift) & chip->pagemask; - -- if (getchip) { -- chipnr = (int)(ofs >> chip->chip_shift); -- -- nand_get_device(mtd, FL_READING); -- -- /* Select the NAND device */ -- chip->select_chip(mtd, chipnr); -- } -- - do { - if (chip->options & NAND_BUSWIDTH_16) { - chip->cmdfunc(mtd, NAND_CMD_READOOB, -@@ -361,11 +393,6 @@ static int nand_block_bad(struct mtd_inf - i++; - } while (!res && i < 2 && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE)); - -- if (getchip) { -- chip->select_chip(mtd, -1); -- nand_release_device(mtd); -- } -- - return res; - } - -@@ -380,7 +407,7 @@ static int nand_block_bad(struct mtd_inf - */ - static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - struct mtd_oob_ops ops; - uint8_t buf[2] = { 0, 0 }; - int ret = 0, res, i = 0; -@@ -430,7 +457,7 @@ static int nand_default_block_markbad(st - */ - static int nand_block_markbad_lowlevel(struct mtd_info *mtd, loff_t ofs) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - int res, ret = 0; - - if (!(chip->bbt_options & NAND_BBT_NO_OOB_BBM)) { -@@ -471,7 +498,7 @@ static int nand_block_markbad_lowlevel(s - */ - static int nand_check_wp(struct mtd_info *mtd) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - - /* Broken xD cards report WP despite being writable */ - if (chip->options & NAND_BROKEN_XD) -@@ -491,7 +518,7 @@ static int nand_check_wp(struct mtd_info - */ - static int nand_block_isreserved(struct mtd_info *mtd, loff_t ofs) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - - if (!chip->bbt) - return 0; -@@ -503,19 +530,17 @@ static int nand_block_isreserved(struct - * nand_block_checkbad - [GENERIC] Check if a block is marked bad - * @mtd: MTD device structure - * @ofs: offset from device start -- * @getchip: 0, if the chip is already selected - * @allowbbt: 1, if its allowed to access the bbt area - * - * Check, if the block is bad. Either by reading the bad block table or - * calling of the scan function. - */ --static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip, -- int allowbbt) -+static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int allowbbt) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - - if (!chip->bbt) -- return chip->block_bad(mtd, ofs, getchip); -+ return chip->block_bad(mtd, ofs); - - /* Return info from the table */ - return nand_isbad_bbt(mtd, ofs, allowbbt); -@@ -531,7 +556,7 @@ static int nand_block_checkbad(struct mt - */ - static void panic_nand_wait_ready(struct mtd_info *mtd, unsigned long timeo) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - int i; - - /* Wait for the device to get ready */ -@@ -551,7 +576,7 @@ static void panic_nand_wait_ready(struct - */ - void nand_wait_ready(struct mtd_info *mtd) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - unsigned long timeo = 400; - - if (in_interrupt() || oops_in_progress) -@@ -566,8 +591,8 @@ void nand_wait_ready(struct mtd_info *mt - cond_resched(); - } while (time_before(jiffies, timeo)); - -- pr_warn_ratelimited( -- "timeout while waiting for chip to become ready\n"); -+ if (!chip->dev_ready(mtd)) -+ pr_warn_ratelimited("timeout while waiting for chip to become ready\n"); - out: - led_trigger_event(nand_led_trigger, LED_OFF); - } -@@ -582,7 +607,7 @@ EXPORT_SYMBOL_GPL(nand_wait_ready); - */ - static void nand_wait_status_ready(struct mtd_info *mtd, unsigned long timeo) - { -- register struct nand_chip *chip = mtd->priv; -+ register struct nand_chip *chip = mtd_to_nand(mtd); - - timeo = jiffies + msecs_to_jiffies(timeo); - do { -@@ -605,7 +630,7 @@ static void nand_wait_status_ready(struc - static void nand_command(struct mtd_info *mtd, unsigned int command, - int column, int page_addr) - { -- register struct nand_chip *chip = mtd->priv; -+ register struct nand_chip *chip = mtd_to_nand(mtd); - int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE; - - /* Write out the command to the device */ -@@ -708,7 +733,7 @@ static void nand_command(struct mtd_info - static void nand_command_lp(struct mtd_info *mtd, unsigned int command, - int column, int page_addr) - { -- register struct nand_chip *chip = mtd->priv; -+ register struct nand_chip *chip = mtd_to_nand(mtd); - - /* Emulate NAND_CMD_READOOB */ - if (command == NAND_CMD_READOOB) { -@@ -832,7 +857,7 @@ static void panic_nand_get_device(struct - static int - nand_get_device(struct mtd_info *mtd, int new_state) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - spinlock_t *lock = &chip->controller->lock; - wait_queue_head_t *wq = &chip->controller->wq; - DECLARE_WAITQUEUE(wait, current); -@@ -952,7 +977,7 @@ static int __nand_unlock(struct mtd_info - { - int ret = 0; - int status, page; -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - - /* Submit address of first page to unlock */ - page = ofs >> chip->page_shift; -@@ -987,7 +1012,7 @@ int nand_unlock(struct mtd_info *mtd, lo - { - int ret = 0; - int chipnr; -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - - pr_debug("%s: start = 0x%012llx, len = %llu\n", - __func__, (unsigned long long)ofs, len); -@@ -1050,7 +1075,7 @@ int nand_lock(struct mtd_info *mtd, loff - { - int ret = 0; - int chipnr, status, page; -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - - pr_debug("%s: start = 0x%012llx, len = %llu\n", - __func__, (unsigned long long)ofs, len); -@@ -1309,13 +1334,12 @@ static int nand_read_page_raw_syndrome(s - static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int oob_required, int page) - { -- int i, eccsize = chip->ecc.size; -+ int i, eccsize = chip->ecc.size, ret; - int eccbytes = chip->ecc.bytes; - int eccsteps = chip->ecc.steps; - uint8_t *p = buf; - uint8_t *ecc_calc = chip->buffers->ecccalc; - uint8_t *ecc_code = chip->buffers->ecccode; -- uint32_t *eccpos = chip->ecc.layout->eccpos; - unsigned int max_bitflips = 0; - - chip->ecc.read_page_raw(mtd, chip, buf, 1, page); -@@ -1323,8 +1347,10 @@ static int nand_read_page_swecc(struct m - for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) - chip->ecc.calculate(mtd, p, &ecc_calc[i]); - -- for (i = 0; i < chip->ecc.total; i++) -- ecc_code[i] = chip->oob_poi[eccpos[i]]; -+ ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0, -+ chip->ecc.total); -+ if (ret) -+ return ret; - - eccsteps = chip->ecc.steps; - p = buf; -@@ -1356,14 +1382,14 @@ static int nand_read_subpage(struct mtd_ - uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi, - int page) - { -- int start_step, end_step, num_steps; -- uint32_t *eccpos = chip->ecc.layout->eccpos; -+ int start_step, end_step, num_steps, ret; - uint8_t *p; - int data_col_addr, i, gaps = 0; - int datafrag_len, eccfrag_len, aligned_len, aligned_pos; - int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1; -- int index; -+ int index, section = 0; - unsigned int max_bitflips = 0; -+ struct mtd_oob_region oobregion = { }; - - /* Column address within the page aligned to ECC size (256bytes) */ - start_step = data_offs / chip->ecc.size; -@@ -1391,12 +1417,13 @@ static int nand_read_subpage(struct mtd_ - * The performance is faster if we position offsets according to - * ecc.pos. Let's make sure that there are no gaps in ECC positions. - */ -- for (i = 0; i < eccfrag_len - 1; i++) { -- if (eccpos[i + index] + 1 != eccpos[i + index + 1]) { -- gaps = 1; -- break; -- } -- } -+ ret = mtd_ooblayout_find_eccregion(mtd, index, §ion, &oobregion); -+ if (ret) -+ return ret; -+ -+ if (oobregion.length < eccfrag_len) -+ gaps = 1; -+ - if (gaps) { - chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1); - chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); -@@ -1405,20 +1432,23 @@ static int nand_read_subpage(struct mtd_ - * Send the command to read the particular ECC bytes take care - * about buswidth alignment in read_buf. - */ -- aligned_pos = eccpos[index] & ~(busw - 1); -+ aligned_pos = oobregion.offset & ~(busw - 1); - aligned_len = eccfrag_len; -- if (eccpos[index] & (busw - 1)) -+ if (oobregion.offset & (busw - 1)) - aligned_len++; -- if (eccpos[index + (num_steps * chip->ecc.bytes)] & (busw - 1)) -+ if ((oobregion.offset + (num_steps * chip->ecc.bytes)) & -+ (busw - 1)) - aligned_len++; - - chip->cmdfunc(mtd, NAND_CMD_RNDOUT, -- mtd->writesize + aligned_pos, -1); -+ mtd->writesize + aligned_pos, -1); - chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len); - } - -- for (i = 0; i < eccfrag_len; i++) -- chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + index]]; -+ ret = mtd_ooblayout_get_eccbytes(mtd, chip->buffers->ecccode, -+ chip->oob_poi, index, eccfrag_len); -+ if (ret) -+ return ret; - - p = bufpoi + data_col_addr; - for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) { -@@ -1426,6 +1456,16 @@ static int nand_read_subpage(struct mtd_ - - stat = chip->ecc.correct(mtd, p, - &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]); -+ if (stat == -EBADMSG && -+ (chip->ecc.options & NAND_ECC_GENERIC_ERASED_CHECK)) { -+ /* check for empty pages with bitflips */ -+ stat = nand_check_erased_ecc_chunk(p, chip->ecc.size, -+ &chip->buffers->ecccode[i], -+ chip->ecc.bytes, -+ NULL, 0, -+ chip->ecc.strength); -+ } -+ - if (stat < 0) { - mtd->ecc_stats.failed++; - } else { -@@ -1449,13 +1489,12 @@ static int nand_read_subpage(struct mtd_ - static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int oob_required, int page) - { -- int i, eccsize = chip->ecc.size; -+ int i, eccsize = chip->ecc.size, ret; - int eccbytes = chip->ecc.bytes; - int eccsteps = chip->ecc.steps; - uint8_t *p = buf; - uint8_t *ecc_calc = chip->buffers->ecccalc; - uint8_t *ecc_code = chip->buffers->ecccode; -- uint32_t *eccpos = chip->ecc.layout->eccpos; - unsigned int max_bitflips = 0; - - for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { -@@ -1465,8 +1504,10 @@ static int nand_read_page_hwecc(struct m - } - chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); - -- for (i = 0; i < chip->ecc.total; i++) -- ecc_code[i] = chip->oob_poi[eccpos[i]]; -+ ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0, -+ chip->ecc.total); -+ if (ret) -+ return ret; - - eccsteps = chip->ecc.steps; - p = buf; -@@ -1475,6 +1516,15 @@ static int nand_read_page_hwecc(struct m - int stat; - - stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); -+ if (stat == -EBADMSG && -+ (chip->ecc.options & NAND_ECC_GENERIC_ERASED_CHECK)) { -+ /* check for empty pages with bitflips */ -+ stat = nand_check_erased_ecc_chunk(p, eccsize, -+ &ecc_code[i], eccbytes, -+ NULL, 0, -+ chip->ecc.strength); -+ } -+ - if (stat < 0) { - mtd->ecc_stats.failed++; - } else { -@@ -1502,12 +1552,11 @@ static int nand_read_page_hwecc(struct m - static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd, - struct nand_chip *chip, uint8_t *buf, int oob_required, int page) - { -- int i, eccsize = chip->ecc.size; -+ int i, eccsize = chip->ecc.size, ret; - int eccbytes = chip->ecc.bytes; - int eccsteps = chip->ecc.steps; - uint8_t *p = buf; - uint8_t *ecc_code = chip->buffers->ecccode; -- uint32_t *eccpos = chip->ecc.layout->eccpos; - uint8_t *ecc_calc = chip->buffers->ecccalc; - unsigned int max_bitflips = 0; - -@@ -1516,8 +1565,10 @@ static int nand_read_page_hwecc_oob_firs - chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); - chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); - -- for (i = 0; i < chip->ecc.total; i++) -- ecc_code[i] = chip->oob_poi[eccpos[i]]; -+ ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0, -+ chip->ecc.total); -+ if (ret) -+ return ret; - - for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { - int stat; -@@ -1527,6 +1578,15 @@ static int nand_read_page_hwecc_oob_firs - chip->ecc.calculate(mtd, p, &ecc_calc[i]); - - stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL); -+ if (stat == -EBADMSG && -+ (chip->ecc.options & NAND_ECC_GENERIC_ERASED_CHECK)) { -+ /* check for empty pages with bitflips */ -+ stat = nand_check_erased_ecc_chunk(p, eccsize, -+ &ecc_code[i], eccbytes, -+ NULL, 0, -+ chip->ecc.strength); -+ } -+ - if (stat < 0) { - mtd->ecc_stats.failed++; - } else { -@@ -1554,6 +1614,7 @@ static int nand_read_page_syndrome(struc - int i, eccsize = chip->ecc.size; - int eccbytes = chip->ecc.bytes; - int eccsteps = chip->ecc.steps; -+ int eccpadbytes = eccbytes + chip->ecc.prepad + chip->ecc.postpad; - uint8_t *p = buf; - uint8_t *oob = chip->oob_poi; - unsigned int max_bitflips = 0; -@@ -1573,19 +1634,29 @@ static int nand_read_page_syndrome(struc - chip->read_buf(mtd, oob, eccbytes); - stat = chip->ecc.correct(mtd, p, oob, NULL); - -- if (stat < 0) { -- mtd->ecc_stats.failed++; -- } else { -- mtd->ecc_stats.corrected += stat; -- max_bitflips = max_t(unsigned int, max_bitflips, stat); -- } -- - oob += eccbytes; - - if (chip->ecc.postpad) { - chip->read_buf(mtd, oob, chip->ecc.postpad); - oob += chip->ecc.postpad; - } -+ -+ if (stat == -EBADMSG && -+ (chip->ecc.options & NAND_ECC_GENERIC_ERASED_CHECK)) { -+ /* check for empty pages with bitflips */ -+ stat = nand_check_erased_ecc_chunk(p, chip->ecc.size, -+ oob - eccpadbytes, -+ eccpadbytes, -+ NULL, 0, -+ chip->ecc.strength); -+ } -+ -+ if (stat < 0) { -+ mtd->ecc_stats.failed++; -+ } else { -+ mtd->ecc_stats.corrected += stat; -+ max_bitflips = max_t(unsigned int, max_bitflips, stat); -+ } - } - - /* Calculate remaining oob bytes */ -@@ -1598,14 +1669,17 @@ static int nand_read_page_syndrome(struc - - /** - * nand_transfer_oob - [INTERN] Transfer oob to client buffer -- * @chip: nand chip structure -+ * @mtd: mtd info structure - * @oob: oob destination address - * @ops: oob ops structure - * @len: size of oob to transfer - */ --static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob, -+static uint8_t *nand_transfer_oob(struct mtd_info *mtd, uint8_t *oob, - struct mtd_oob_ops *ops, size_t len) - { -+ struct nand_chip *chip = mtd_to_nand(mtd); -+ int ret; -+ - switch (ops->mode) { - - case MTD_OPS_PLACE_OOB: -@@ -1613,31 +1687,12 @@ static uint8_t *nand_transfer_oob(struct - memcpy(oob, chip->oob_poi + ops->ooboffs, len); - return oob + len; - -- case MTD_OPS_AUTO_OOB: { -- struct nand_oobfree *free = chip->ecc.layout->oobfree; -- uint32_t boffs = 0, roffs = ops->ooboffs; -- size_t bytes = 0; -- -- for (; free->length && len; free++, len -= bytes) { -- /* Read request not from offset 0? */ -- if (unlikely(roffs)) { -- if (roffs >= free->length) { -- roffs -= free->length; -- continue; -- } -- boffs = free->offset + roffs; -- bytes = min_t(size_t, len, -- (free->length - roffs)); -- roffs = 0; -- } else { -- bytes = min_t(size_t, len, free->length); -- boffs = free->offset; -- } -- memcpy(oob, chip->oob_poi + boffs, bytes); -- oob += bytes; -- } -- return oob; -- } -+ case MTD_OPS_AUTO_OOB: -+ ret = mtd_ooblayout_get_databytes(mtd, oob, chip->oob_poi, -+ ops->ooboffs, len); -+ BUG_ON(ret); -+ return oob + len; -+ - default: - BUG(); - } -@@ -1655,7 +1710,7 @@ static uint8_t *nand_transfer_oob(struct - */ - static int nand_setup_read_retry(struct mtd_info *mtd, int retry_mode) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - - pr_debug("setting READ RETRY mode %d\n", retry_mode); - -@@ -1680,12 +1735,11 @@ static int nand_do_read_ops(struct mtd_i - struct mtd_oob_ops *ops) - { - int chipnr, page, realpage, col, bytes, aligned, oob_required; -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - int ret = 0; - uint32_t readlen = ops->len; - uint32_t oobreadlen = ops->ooblen; -- uint32_t max_oobsize = ops->mode == MTD_OPS_AUTO_OOB ? -- mtd->oobavail : mtd->oobsize; -+ uint32_t max_oobsize = mtd_oobavail(mtd, ops); - - uint8_t *bufpoi, *oob, *buf; - int use_bufpoi; -@@ -1772,7 +1826,7 @@ read_retry: - int toread = min(oobreadlen, max_oobsize); - - if (toread) { -- oob = nand_transfer_oob(chip, -+ oob = nand_transfer_oob(mtd, - oob, ops, toread); - oobreadlen -= toread; - } -@@ -2025,7 +2079,7 @@ static int nand_do_read_oob(struct mtd_i - { - unsigned int max_bitflips = 0; - int page, realpage, chipnr; -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - struct mtd_ecc_stats stats; - int readlen = ops->ooblen; - int len; -@@ -2037,10 +2091,7 @@ static int nand_do_read_oob(struct mtd_i - - stats = mtd->ecc_stats; - -- if (ops->mode == MTD_OPS_AUTO_OOB) -- len = chip->ecc.layout->oobavail; -- else -- len = mtd->oobsize; -+ len = mtd_oobavail(mtd, ops); - - if (unlikely(ops->ooboffs >= len)) { - pr_debug("%s: attempt to start read outside oob\n", -@@ -2074,7 +2125,7 @@ static int nand_do_read_oob(struct mtd_i - break; - - len = min(len, readlen); -- buf = nand_transfer_oob(chip, buf, ops, len); -+ buf = nand_transfer_oob(mtd, buf, ops, len); - - if (chip->options & NAND_NEED_READRDY) { - /* Apply delay or wait for ready/busy pin */ -@@ -2235,19 +2286,20 @@ static int nand_write_page_swecc(struct - const uint8_t *buf, int oob_required, - int page) - { -- int i, eccsize = chip->ecc.size; -+ int i, eccsize = chip->ecc.size, ret; - int eccbytes = chip->ecc.bytes; - int eccsteps = chip->ecc.steps; - uint8_t *ecc_calc = chip->buffers->ecccalc; - const uint8_t *p = buf; -- uint32_t *eccpos = chip->ecc.layout->eccpos; - - /* Software ECC calculation */ - for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) - chip->ecc.calculate(mtd, p, &ecc_calc[i]); - -- for (i = 0; i < chip->ecc.total; i++) -- chip->oob_poi[eccpos[i]] = ecc_calc[i]; -+ ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0, -+ chip->ecc.total); -+ if (ret) -+ return ret; - - return chip->ecc.write_page_raw(mtd, chip, buf, 1, page); - } -@@ -2264,12 +2316,11 @@ static int nand_write_page_hwecc(struct - const uint8_t *buf, int oob_required, - int page) - { -- int i, eccsize = chip->ecc.size; -+ int i, eccsize = chip->ecc.size, ret; - int eccbytes = chip->ecc.bytes; - int eccsteps = chip->ecc.steps; - uint8_t *ecc_calc = chip->buffers->ecccalc; - const uint8_t *p = buf; -- uint32_t *eccpos = chip->ecc.layout->eccpos; - - for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { - chip->ecc.hwctl(mtd, NAND_ECC_WRITE); -@@ -2277,8 +2328,10 @@ static int nand_write_page_hwecc(struct - chip->ecc.calculate(mtd, p, &ecc_calc[i]); - } - -- for (i = 0; i < chip->ecc.total; i++) -- chip->oob_poi[eccpos[i]] = ecc_calc[i]; -+ ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0, -+ chip->ecc.total); -+ if (ret) -+ return ret; - - chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); - -@@ -2306,11 +2359,10 @@ static int nand_write_subpage_hwecc(stru - int ecc_size = chip->ecc.size; - int ecc_bytes = chip->ecc.bytes; - int ecc_steps = chip->ecc.steps; -- uint32_t *eccpos = chip->ecc.layout->eccpos; - uint32_t start_step = offset / ecc_size; - uint32_t end_step = (offset + data_len - 1) / ecc_size; - int oob_bytes = mtd->oobsize / ecc_steps; -- int step, i; -+ int step, ret; - - for (step = 0; step < ecc_steps; step++) { - /* configure controller for WRITE access */ -@@ -2338,8 +2390,10 @@ static int nand_write_subpage_hwecc(stru - /* copy calculated ECC for whole page to chip->buffer->oob */ - /* this include masked-value(0xFF) for unwritten subpages */ - ecc_calc = chip->buffers->ecccalc; -- for (i = 0; i < chip->ecc.total; i++) -- chip->oob_poi[eccpos[i]] = ecc_calc[i]; -+ ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0, -+ chip->ecc.total); -+ if (ret) -+ return ret; - - /* write OOB buffer to NAND device */ - chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); -@@ -2475,7 +2529,8 @@ static int nand_write_page(struct mtd_in - static uint8_t *nand_fill_oob(struct mtd_info *mtd, uint8_t *oob, size_t len, - struct mtd_oob_ops *ops) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); -+ int ret; - - /* - * Initialise to all 0xFF, to avoid the possibility of left over OOB -@@ -2490,31 +2545,12 @@ static uint8_t *nand_fill_oob(struct mtd - memcpy(chip->oob_poi + ops->ooboffs, oob, len); - return oob + len; - -- case MTD_OPS_AUTO_OOB: { -- struct nand_oobfree *free = chip->ecc.layout->oobfree; -- uint32_t boffs = 0, woffs = ops->ooboffs; -- size_t bytes = 0; -- -- for (; free->length && len; free++, len -= bytes) { -- /* Write request not from offset 0? */ -- if (unlikely(woffs)) { -- if (woffs >= free->length) { -- woffs -= free->length; -- continue; -- } -- boffs = free->offset + woffs; -- bytes = min_t(size_t, len, -- (free->length - woffs)); -- woffs = 0; -- } else { -- bytes = min_t(size_t, len, free->length); -- boffs = free->offset; -- } -- memcpy(chip->oob_poi + boffs, oob, bytes); -- oob += bytes; -- } -- return oob; -- } -+ case MTD_OPS_AUTO_OOB: -+ ret = mtd_ooblayout_set_databytes(mtd, oob, chip->oob_poi, -+ ops->ooboffs, len); -+ BUG_ON(ret); -+ return oob + len; -+ - default: - BUG(); - } -@@ -2535,12 +2571,11 @@ static int nand_do_write_ops(struct mtd_ - struct mtd_oob_ops *ops) - { - int chipnr, realpage, page, blockmask, column; -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - uint32_t writelen = ops->len; - - uint32_t oobwritelen = ops->ooblen; -- uint32_t oobmaxlen = ops->mode == MTD_OPS_AUTO_OOB ? -- mtd->oobavail : mtd->oobsize; -+ uint32_t oobmaxlen = mtd_oobavail(mtd, ops); - - uint8_t *oob = ops->oobbuf; - uint8_t *buf = ops->datbuf; -@@ -2665,7 +2700,7 @@ err_out: - static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const uint8_t *buf) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - int chipnr = (int)(to >> chip->chip_shift); - struct mtd_oob_ops ops; - int ret; -@@ -2728,15 +2763,12 @@ static int nand_do_write_oob(struct mtd_ - struct mtd_oob_ops *ops) - { - int chipnr, page, status, len; -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - - pr_debug("%s: to = 0x%08x, len = %i\n", - __func__, (unsigned int)to, (int)ops->ooblen); - -- if (ops->mode == MTD_OPS_AUTO_OOB) -- len = chip->ecc.layout->oobavail; -- else -- len = mtd->oobsize; -+ len = mtd_oobavail(mtd, ops); - - /* Do not allow write past end of page */ - if ((ops->ooboffs + ops->ooblen) > len) { -@@ -2853,7 +2885,7 @@ out: - */ - static int single_erase(struct mtd_info *mtd, int page) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - /* Send commands to erase a block */ - chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page); - chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1); -@@ -2885,7 +2917,7 @@ int nand_erase_nand(struct mtd_info *mtd - int allowbbt) - { - int page, status, pages_per_block, ret, chipnr; -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - loff_t len; - - pr_debug("%s: start = 0x%012llx, len = %llu\n", -@@ -2924,7 +2956,7 @@ int nand_erase_nand(struct mtd_info *mtd - while (len) { - /* Check if we have a bad block, we do not erase bad blocks! */ - if (nand_block_checkbad(mtd, ((loff_t) page) << -- chip->page_shift, 0, allowbbt)) { -+ chip->page_shift, allowbbt)) { - pr_warn("%s: attempt to erase a bad block at page 0x%08x\n", - __func__, page); - instr->state = MTD_ERASE_FAILED; -@@ -3011,7 +3043,20 @@ static void nand_sync(struct mtd_info *m - */ - static int nand_block_isbad(struct mtd_info *mtd, loff_t offs) - { -- return nand_block_checkbad(mtd, offs, 1, 0); -+ struct nand_chip *chip = mtd_to_nand(mtd); -+ int chipnr = (int)(offs >> chip->chip_shift); -+ int ret; -+ -+ /* Select the NAND device */ -+ nand_get_device(mtd, FL_READING); -+ chip->select_chip(mtd, chipnr); -+ -+ ret = nand_block_checkbad(mtd, offs, 0); -+ -+ chip->select_chip(mtd, -1); -+ nand_release_device(mtd); -+ -+ return ret; - } - - /** -@@ -3100,7 +3145,7 @@ static int nand_suspend(struct mtd_info - */ - static void nand_resume(struct mtd_info *mtd) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - - if (chip->state == FL_PM_SUSPENDED) - nand_release_device(mtd); -@@ -3272,7 +3317,7 @@ ext_out: - - static int nand_setup_read_retry_micron(struct mtd_info *mtd, int retry_mode) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {retry_mode}; - - return chip->onfi_set_features(mtd, chip, ONFI_FEATURE_ADDR_READ_RETRY, -@@ -3943,10 +3988,13 @@ ident_done: - return type; - } - --static int nand_dt_init(struct mtd_info *mtd, struct nand_chip *chip, -- struct device_node *dn) -+static int nand_dt_init(struct nand_chip *chip) - { -- int ecc_mode, ecc_strength, ecc_step; -+ struct device_node *dn = nand_get_flash_node(chip); -+ int ecc_mode, ecc_algo, ecc_strength, ecc_step; -+ -+ if (!dn) -+ return 0; - - if (of_get_nand_bus_width(dn) == 16) - chip->options |= NAND_BUSWIDTH_16; -@@ -3955,6 +4003,7 @@ static int nand_dt_init(struct mtd_info - chip->bbt_options |= NAND_BBT_USE_FLASH; - - ecc_mode = of_get_nand_ecc_mode(dn); -+ ecc_algo = of_get_nand_ecc_algo(dn); - ecc_strength = of_get_nand_ecc_strength(dn); - ecc_step = of_get_nand_ecc_step_size(dn); - -@@ -3967,6 +4016,9 @@ static int nand_dt_init(struct mtd_info - if (ecc_mode >= 0) - chip->ecc.mode = ecc_mode; - -+ if (ecc_algo >= 0) -+ chip->ecc.algo = ecc_algo; -+ - if (ecc_strength >= 0) - chip->ecc.strength = ecc_strength; - -@@ -3990,15 +4042,16 @@ int nand_scan_ident(struct mtd_info *mtd - struct nand_flash_dev *table) - { - int i, nand_maf_id, nand_dev_id; -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - struct nand_flash_dev *type; - int ret; - -- if (chip->flash_node) { -- ret = nand_dt_init(mtd, chip, chip->flash_node); -- if (ret) -- return ret; -- } -+ ret = nand_dt_init(chip); -+ if (ret) -+ return ret; -+ -+ if (!mtd->name && mtd->dev.parent) -+ mtd->name = dev_name(mtd->dev.parent); - - if (!mtd->name && mtd->dev.parent) - mtd->name = dev_name(mtd->dev.parent); -@@ -4061,7 +4114,7 @@ EXPORT_SYMBOL(nand_scan_ident); - */ - static bool nand_ecc_strength_good(struct mtd_info *mtd) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - struct nand_ecc_ctrl *ecc = &chip->ecc; - int corr, ds_corr; - -@@ -4089,10 +4142,10 @@ static bool nand_ecc_strength_good(struc - */ - int nand_scan_tail(struct mtd_info *mtd) - { -- int i; -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - struct nand_ecc_ctrl *ecc = &chip->ecc; - struct nand_buffers *nbuf; -+ int ret; - - /* New bad blocks should be marked in OOB, flash-based BBT, or both */ - BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) && -@@ -4119,19 +4172,15 @@ int nand_scan_tail(struct mtd_info *mtd) - /* - * If no default placement scheme is given, select an appropriate one. - */ -- if (!ecc->layout && (ecc->mode != NAND_ECC_SOFT_BCH)) { -+ if (!mtd->ooblayout && (ecc->mode != NAND_ECC_SOFT_BCH)) { - switch (mtd->oobsize) { - case 8: -- ecc->layout = &nand_oob_8; -- break; - case 16: -- ecc->layout = &nand_oob_16; -+ mtd_set_ooblayout(mtd, &nand_ooblayout_sp_ops); - break; - case 64: -- ecc->layout = &nand_oob_64; -- break; - case 128: -- ecc->layout = &nand_oob_128; -+ mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); - break; - default: - pr_warn("No oob scheme defined for oobsize %d\n", -@@ -4174,7 +4223,7 @@ int nand_scan_tail(struct mtd_info *mtd) - ecc->write_oob = nand_write_oob_std; - if (!ecc->read_subpage) - ecc->read_subpage = nand_read_subpage; -- if (!ecc->write_subpage) -+ if (!ecc->write_subpage && ecc->hwctl && ecc->calculate) - ecc->write_subpage = nand_write_subpage_hwecc; - - case NAND_ECC_HW_SYNDROME: -@@ -4252,10 +4301,8 @@ int nand_scan_tail(struct mtd_info *mtd) - } - - /* See nand_bch_init() for details. */ -- ecc->bytes = DIV_ROUND_UP( -- ecc->strength * fls(8 * ecc->size), 8); -- ecc->priv = nand_bch_init(mtd, ecc->size, ecc->bytes, -- &ecc->layout); -+ ecc->bytes = 0; -+ ecc->priv = nand_bch_init(mtd); - if (!ecc->priv) { - pr_warn("BCH ECC initialization failed!\n"); - BUG(); -@@ -4286,20 +4333,9 @@ int nand_scan_tail(struct mtd_info *mtd) - if (!ecc->write_oob_raw) - ecc->write_oob_raw = ecc->write_oob; - -- /* -- * The number of bytes available for a client to place data into -- * the out of band area. -- */ -- ecc->layout->oobavail = 0; -- for (i = 0; ecc->layout->oobfree[i].length -- && i < ARRAY_SIZE(ecc->layout->oobfree); i++) -- ecc->layout->oobavail += ecc->layout->oobfree[i].length; -- mtd->oobavail = ecc->layout->oobavail; -- -- /* ECC sanity check: warn if it's too weak */ -- if (!nand_ecc_strength_good(mtd)) -- pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n", -- mtd->name); -+ /* propagate ecc info to mtd_info */ -+ mtd->ecc_strength = ecc->strength; -+ mtd->ecc_step_size = ecc->size; - - /* - * Set the number of read / write steps for one page depending on ECC -@@ -4312,6 +4348,21 @@ int nand_scan_tail(struct mtd_info *mtd) - } - ecc->total = ecc->steps * ecc->bytes; - -+ /* -+ * The number of bytes available for a client to place data into -+ * the out of band area. -+ */ -+ ret = mtd_ooblayout_count_freebytes(mtd); -+ if (ret < 0) -+ ret = 0; -+ -+ mtd->oobavail = ret; -+ -+ /* ECC sanity check: warn if it's too weak */ -+ if (!nand_ecc_strength_good(mtd)) -+ pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n", -+ mtd->name); -+ - /* Allow subpage writes up to ecc.steps. Not possible for MLC flash */ - if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) { - switch (ecc->steps) { -@@ -4368,10 +4419,6 @@ int nand_scan_tail(struct mtd_info *mtd) - mtd->_block_markbad = nand_block_markbad; - mtd->writebufsize = mtd->writesize; - -- /* propagate ecc info to mtd_info */ -- mtd->ecclayout = ecc->layout; -- mtd->ecc_strength = ecc->strength; -- mtd->ecc_step_size = ecc->size; - /* - * Initialize bitflip_threshold to its default prior scan_bbt() call. - * scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be -@@ -4427,7 +4474,7 @@ EXPORT_SYMBOL(nand_scan); - */ - void nand_release(struct mtd_info *mtd) - { -- struct nand_chip *chip = mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - - if (chip->ecc.mode == NAND_ECC_SOFT_BCH) - nand_bch_free((struct nand_bch_control *)chip->ecc.priv); ---- a/drivers/mtd/nand/nand_bbt.c -+++ b/drivers/mtd/nand/nand_bbt.c -@@ -172,7 +172,7 @@ static int read_bbt(struct mtd_info *mtd - struct nand_bbt_descr *td, int offs) - { - int res, ret = 0, i, j, act = 0; -- struct nand_chip *this = mtd->priv; -+ struct nand_chip *this = mtd_to_nand(mtd); - size_t retlen, len, totlen; - loff_t from; - int bits = td->options & NAND_BBT_NRBITS_MSK; -@@ -263,7 +263,7 @@ static int read_bbt(struct mtd_info *mtd - */ - static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip) - { -- struct nand_chip *this = mtd->priv; -+ struct nand_chip *this = mtd_to_nand(mtd); - int res = 0, i; - - if (td->options & NAND_BBT_PERCHIP) { -@@ -388,7 +388,7 @@ static u32 bbt_get_ver_offs(struct mtd_i - static void read_abs_bbts(struct mtd_info *mtd, uint8_t *buf, - struct nand_bbt_descr *td, struct nand_bbt_descr *md) - { -- struct nand_chip *this = mtd->priv; -+ struct nand_chip *this = mtd_to_nand(mtd); - - /* Read the primary version, if available */ - if (td->options & NAND_BBT_VERSION) { -@@ -454,7 +454,7 @@ static int scan_block_fast(struct mtd_in - static int create_bbt(struct mtd_info *mtd, uint8_t *buf, - struct nand_bbt_descr *bd, int chip) - { -- struct nand_chip *this = mtd->priv; -+ struct nand_chip *this = mtd_to_nand(mtd); - int i, numblocks, numpages; - int startblock; - loff_t from; -@@ -523,7 +523,7 @@ static int create_bbt(struct mtd_info *m - */ - static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td) - { -- struct nand_chip *this = mtd->priv; -+ struct nand_chip *this = mtd_to_nand(mtd); - int i, chips; - int startblock, block, dir; - int scanlen = mtd->writesize + mtd->oobsize; -@@ -618,7 +618,7 @@ static int write_bbt(struct mtd_info *mt - struct nand_bbt_descr *td, struct nand_bbt_descr *md, - int chipsel) - { -- struct nand_chip *this = mtd->priv; -+ struct nand_chip *this = mtd_to_nand(mtd); - struct erase_info einfo; - int i, res, chip = 0; - int bits, startblock, dir, page, offs, numblocks, sft, sftmsk; -@@ -819,7 +819,7 @@ static int write_bbt(struct mtd_info *mt - */ - static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd) - { -- struct nand_chip *this = mtd->priv; -+ struct nand_chip *this = mtd_to_nand(mtd); - - return create_bbt(mtd, this->buffers->databuf, bd, -1); - } -@@ -838,7 +838,7 @@ static inline int nand_memory_bbt(struct - static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd) - { - int i, chips, writeops, create, chipsel, res, res2; -- struct nand_chip *this = mtd->priv; -+ struct nand_chip *this = mtd_to_nand(mtd); - struct nand_bbt_descr *td = this->bbt_td; - struct nand_bbt_descr *md = this->bbt_md; - struct nand_bbt_descr *rd, *rd2; -@@ -962,7 +962,7 @@ static int check_create(struct mtd_info - */ - static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td) - { -- struct nand_chip *this = mtd->priv; -+ struct nand_chip *this = mtd_to_nand(mtd); - int i, j, chips, block, nrblocks, update; - uint8_t oldval; - -@@ -1022,7 +1022,7 @@ static void mark_bbt_region(struct mtd_i - */ - static void verify_bbt_descr(struct mtd_info *mtd, struct nand_bbt_descr *bd) - { -- struct nand_chip *this = mtd->priv; -+ struct nand_chip *this = mtd_to_nand(mtd); - u32 pattern_len; - u32 bits; - u32 table_size; -@@ -1074,7 +1074,7 @@ static void verify_bbt_descr(struct mtd_ - */ - static int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd) - { -- struct nand_chip *this = mtd->priv; -+ struct nand_chip *this = mtd_to_nand(mtd); - int len, res; - uint8_t *buf; - struct nand_bbt_descr *td = this->bbt_td; -@@ -1147,7 +1147,7 @@ err: - */ - static int nand_update_bbt(struct mtd_info *mtd, loff_t offs) - { -- struct nand_chip *this = mtd->priv; -+ struct nand_chip *this = mtd_to_nand(mtd); - int len, res = 0; - int chip, chipsel; - uint8_t *buf; -@@ -1281,7 +1281,7 @@ static int nand_create_badblock_pattern( - */ - int nand_default_bbt(struct mtd_info *mtd) - { -- struct nand_chip *this = mtd->priv; -+ struct nand_chip *this = mtd_to_nand(mtd); - int ret; - - /* Is a flash based bad block table requested? */ -@@ -1317,7 +1317,7 @@ int nand_default_bbt(struct mtd_info *mt - */ - int nand_isreserved_bbt(struct mtd_info *mtd, loff_t offs) - { -- struct nand_chip *this = mtd->priv; -+ struct nand_chip *this = mtd_to_nand(mtd); - int block; - - block = (int)(offs >> this->bbt_erase_shift); -@@ -1332,7 +1332,7 @@ int nand_isreserved_bbt(struct mtd_info - */ - int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt) - { -- struct nand_chip *this = mtd->priv; -+ struct nand_chip *this = mtd_to_nand(mtd); - int block, res; - - block = (int)(offs >> this->bbt_erase_shift); -@@ -1359,7 +1359,7 @@ int nand_isbad_bbt(struct mtd_info *mtd, - */ - int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs) - { -- struct nand_chip *this = mtd->priv; -+ struct nand_chip *this = mtd_to_nand(mtd); - int block, ret = 0; - - block = (int)(offs >> this->bbt_erase_shift); -@@ -1373,5 +1373,3 @@ int nand_markbad_bbt(struct mtd_info *mt - - return ret; - } -- --EXPORT_SYMBOL(nand_scan_bbt); ---- a/drivers/mtd/nand/nand_bch.c -+++ b/drivers/mtd/nand/nand_bch.c -@@ -32,13 +32,11 @@ - /** - * struct nand_bch_control - private NAND BCH control structure - * @bch: BCH control structure -- * @ecclayout: private ecc layout for this BCH configuration - * @errloc: error location array - * @eccmask: XOR ecc mask, allows erased pages to be decoded as valid - */ - struct nand_bch_control { - struct bch_control *bch; -- struct nand_ecclayout ecclayout; - unsigned int *errloc; - unsigned char *eccmask; - }; -@@ -52,7 +50,7 @@ struct nand_bch_control { - int nand_bch_calculate_ecc(struct mtd_info *mtd, const unsigned char *buf, - unsigned char *code) - { -- const struct nand_chip *chip = mtd->priv; -+ const struct nand_chip *chip = mtd_to_nand(mtd); - struct nand_bch_control *nbc = chip->ecc.priv; - unsigned int i; - -@@ -79,7 +77,7 @@ EXPORT_SYMBOL(nand_bch_calculate_ecc); - int nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf, - unsigned char *read_ecc, unsigned char *calc_ecc) - { -- const struct nand_chip *chip = mtd->priv; -+ const struct nand_chip *chip = mtd_to_nand(mtd); - struct nand_bch_control *nbc = chip->ecc.priv; - unsigned int *errloc = nbc->errloc; - int i, count; -@@ -98,7 +96,7 @@ int nand_bch_correct_data(struct mtd_inf - } - } else if (count < 0) { - printk(KERN_ERR "ecc unrecoverable error\n"); -- count = -1; -+ count = -EBADMSG; - } - return count; - } -@@ -107,9 +105,6 @@ EXPORT_SYMBOL(nand_bch_correct_data); - /** - * nand_bch_init - [NAND Interface] Initialize NAND BCH error correction - * @mtd: MTD block structure -- * @eccsize: ecc block size in bytes -- * @eccbytes: ecc length in bytes -- * @ecclayout: output default layout - * - * Returns: - * a pointer to a new NAND BCH control structure, or NULL upon failure -@@ -123,14 +118,20 @@ EXPORT_SYMBOL(nand_bch_correct_data); - * @eccsize = 512 (thus, m=13 is the smallest integer such that 2^m-1 > 512*8) - * @eccbytes = 7 (7 bytes are required to store m*t = 13*4 = 52 bits) - */ --struct nand_bch_control * --nand_bch_init(struct mtd_info *mtd, unsigned int eccsize, unsigned int eccbytes, -- struct nand_ecclayout **ecclayout) -+struct nand_bch_control *nand_bch_init(struct mtd_info *mtd) - { -+ struct nand_chip *nand = mtd_to_nand(mtd); - unsigned int m, t, eccsteps, i; -- struct nand_ecclayout *layout; - struct nand_bch_control *nbc = NULL; - unsigned char *erased_page; -+ unsigned int eccsize = nand->ecc.size; -+ unsigned int eccbytes = nand->ecc.bytes; -+ unsigned int eccstrength = nand->ecc.strength; -+ -+ if (!eccbytes && eccstrength) { -+ eccbytes = DIV_ROUND_UP(eccstrength * fls(8 * eccsize), 8); -+ nand->ecc.bytes = eccbytes; -+ } - - if (!eccsize || !eccbytes) { - printk(KERN_WARNING "ecc parameters not supplied\n"); -@@ -158,7 +159,7 @@ nand_bch_init(struct mtd_info *mtd, unsi - eccsteps = mtd->writesize/eccsize; - - /* if no ecc placement scheme was provided, build one */ -- if (!*ecclayout) { -+ if (!mtd->ooblayout) { - - /* handle large page devices only */ - if (mtd->oobsize < 64) { -@@ -167,24 +168,7 @@ nand_bch_init(struct mtd_info *mtd, unsi - goto fail; - } - -- layout = &nbc->ecclayout; -- layout->eccbytes = eccsteps*eccbytes; -- -- /* reserve 2 bytes for bad block marker */ -- if (layout->eccbytes+2 > mtd->oobsize) { -- printk(KERN_WARNING "no suitable oob scheme available " -- "for oobsize %d eccbytes %u\n", mtd->oobsize, -- eccbytes); -- goto fail; -- } -- /* put ecc bytes at oob tail */ -- for (i = 0; i < layout->eccbytes; i++) -- layout->eccpos[i] = mtd->oobsize-layout->eccbytes+i; -- -- layout->oobfree[0].offset = 2; -- layout->oobfree[0].length = mtd->oobsize-2-layout->eccbytes; -- -- *ecclayout = layout; -+ mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); - } - - /* sanity checks */ -@@ -192,7 +176,8 @@ nand_bch_init(struct mtd_info *mtd, unsi - printk(KERN_WARNING "eccsize %u is too large\n", eccsize); - goto fail; - } -- if ((*ecclayout)->eccbytes != (eccsteps*eccbytes)) { -+ -+ if (mtd_ooblayout_count_eccbytes(mtd) != (eccsteps*eccbytes)) { - printk(KERN_WARNING "invalid ecc layout\n"); - goto fail; - } -@@ -216,6 +201,9 @@ nand_bch_init(struct mtd_info *mtd, unsi - for (i = 0; i < eccbytes; i++) - nbc->eccmask[i] ^= 0xff; - -+ if (!eccstrength) -+ nand->ecc.strength = (eccbytes * 8) / fls(8 * eccsize); -+ - return nbc; - fail: - nand_bch_free(nbc); ---- a/drivers/mtd/nand/nand_ecc.c -+++ b/drivers/mtd/nand/nand_ecc.c -@@ -424,7 +424,7 @@ int nand_calculate_ecc(struct mtd_info * - unsigned char *code) - { - __nand_calculate_ecc(buf, -- ((struct nand_chip *)mtd->priv)->ecc.size, code); -+ mtd_to_nand(mtd)->ecc.size, code); - - return 0; - } -@@ -524,7 +524,7 @@ int nand_correct_data(struct mtd_info *m - unsigned char *read_ecc, unsigned char *calc_ecc) - { - return __nand_correct_data(buf, read_ecc, calc_ecc, -- ((struct nand_chip *)mtd->priv)->ecc.size); -+ mtd_to_nand(mtd)->ecc.size); - } - EXPORT_SYMBOL(nand_correct_data); - ---- a/drivers/mtd/nand/nand_ids.c -+++ b/drivers/mtd/nand/nand_ids.c -@@ -50,8 +50,8 @@ struct nand_flash_dev nand_flash_ids[] = - SZ_16K, SZ_8K, SZ_4M, 0, 6, 1280, NAND_ECC_INFO(40, SZ_1K) }, - {"H27UCG8T2ATR-BC 64G 3.3V 8-bit", - { .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} }, -- SZ_8K, SZ_8K, SZ_2M, 0, 6, 640, NAND_ECC_INFO(40, SZ_1K), -- 4 }, -+ SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640, -+ NAND_ECC_INFO(40, SZ_1K), 4 }, - - LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS), - LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS), ---- a/drivers/mtd/nand/nandsim.c -+++ b/drivers/mtd/nand/nandsim.c -@@ -666,8 +666,8 @@ static char *get_partition_name(int i) - */ - static int init_nandsim(struct mtd_info *mtd) - { -- struct nand_chip *chip = mtd->priv; -- struct nandsim *ns = chip->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); -+ struct nandsim *ns = nand_get_controller_data(chip); - int i, ret = 0; - uint64_t remains; - uint64_t next_offset; -@@ -1908,7 +1908,8 @@ static void switch_state(struct nandsim - - static u_char ns_nand_read_byte(struct mtd_info *mtd) - { -- struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); -+ struct nandsim *ns = nand_get_controller_data(chip); - u_char outb = 0x00; - - /* Sanity and correctness checks */ -@@ -1969,7 +1970,8 @@ static u_char ns_nand_read_byte(struct m - - static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte) - { -- struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); -+ struct nandsim *ns = nand_get_controller_data(chip); - - /* Sanity and correctness checks */ - if (!ns->lines.ce) { -@@ -2123,7 +2125,8 @@ static void ns_nand_write_byte(struct mt - - static void ns_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int bitmask) - { -- struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); -+ struct nandsim *ns = nand_get_controller_data(chip); - - ns->lines.cle = bitmask & NAND_CLE ? 1 : 0; - ns->lines.ale = bitmask & NAND_ALE ? 1 : 0; -@@ -2141,7 +2144,7 @@ static int ns_device_ready(struct mtd_in - - static uint16_t ns_nand_read_word(struct mtd_info *mtd) - { -- struct nand_chip *chip = (struct nand_chip *)mtd->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); - - NS_DBG("read_word\n"); - -@@ -2150,7 +2153,8 @@ static uint16_t ns_nand_read_word(struct - - static void ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) - { -- struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); -+ struct nandsim *ns = nand_get_controller_data(chip); - - /* Check that chip is expecting data input */ - if (!(ns->state & STATE_DATAIN_MASK)) { -@@ -2177,7 +2181,8 @@ static void ns_nand_write_buf(struct mtd - - static void ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) - { -- struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv; -+ struct nand_chip *chip = mtd_to_nand(mtd); -+ struct nandsim *ns = nand_get_controller_data(chip); - - /* Sanity and correctness checks */ - if (!ns->lines.ce) { -@@ -2198,7 +2203,7 @@ static void ns_nand_read_buf(struct mtd_ - int i; - - for (i = 0; i < len; i++) -- buf[i] = ((struct nand_chip *)mtd->priv)->read_byte(mtd); -+ buf[i] = mtd_to_nand(mtd)->read_byte(mtd); - - return; - } -@@ -2236,16 +2241,15 @@ static int __init ns_init_module(void) - } - - /* Allocate and initialize mtd_info, nand_chip and nandsim structures */ -- nsmtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip) -- + sizeof(struct nandsim), GFP_KERNEL); -- if (!nsmtd) { -+ chip = kzalloc(sizeof(struct nand_chip) + sizeof(struct nandsim), -+ GFP_KERNEL); -+ if (!chip) { - NS_ERR("unable to allocate core structures.\n"); - return -ENOMEM; - } -- chip = (struct nand_chip *)(nsmtd + 1); -- nsmtd->priv = (void *)chip; -+ nsmtd = nand_to_mtd(chip); - nand = (struct nandsim *)(chip + 1); -- chip->priv = (void *)nand; -+ nand_set_controller_data(chip, (void *)nand); - - /* - * Register simulator's callbacks. -@@ -2257,6 +2261,7 @@ static int __init ns_init_module(void) - chip->read_buf = ns_nand_read_buf; - chip->read_word = ns_nand_read_word; - chip->ecc.mode = NAND_ECC_SOFT; -+ chip->ecc.algo = NAND_ECC_HAMMING; - /* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */ - /* and 'badblocks' parameters to work */ - chip->options |= NAND_SKIP_BBTSCAN; -@@ -2335,6 +2340,7 @@ static int __init ns_init_module(void) - goto error; - } - chip->ecc.mode = NAND_ECC_SOFT_BCH; -+ chip->ecc.algo = NAND_ECC_BCH; - chip->ecc.size = 512; - chip->ecc.strength = bch; - chip->ecc.bytes = eccbytes; -@@ -2392,7 +2398,7 @@ err_exit: - for (i = 0;i < ARRAY_SIZE(nand->partitions); ++i) - kfree(nand->partitions[i].name); - error: -- kfree(nsmtd); -+ kfree(chip); - free_lists(); - - return retval; -@@ -2405,7 +2411,8 @@ module_init(ns_init_module); - */ - static void __exit ns_cleanup_module(void) - { -- struct nandsim *ns = ((struct nand_chip *)nsmtd->priv)->priv; -+ struct nand_chip *chip = mtd_to_nand(nsmtd); -+ struct nandsim *ns = nand_get_controller_data(chip); - int i; - - nandsim_debugfs_remove(ns); -@@ -2413,7 +2420,7 @@ static void __exit ns_cleanup_module(voi - nand_release(nsmtd); /* Unregister driver */ - for (i = 0;i < ARRAY_SIZE(ns->partitions); ++i) - kfree(ns->partitions[i].name); -- kfree(nsmtd); /* Free other structures */ -+ kfree(mtd_to_nand(nsmtd)); /* Free other structures */ - free_lists(); - } - ---- a/drivers/mtd/ofpart.c -+++ b/drivers/mtd/ofpart.c -@@ -26,9 +26,10 @@ static bool node_has_compatible(struct d - } - - static int parse_ofpart_partitions(struct mtd_info *master, -- struct mtd_partition **pparts, -+ const struct mtd_partition **pparts, - struct mtd_part_parser_data *data) - { -+ struct mtd_partition *parts; - struct device_node *mtd_node; - struct device_node *ofpart_node; - const char *partname; -@@ -37,10 +38,8 @@ static int parse_ofpart_partitions(struc - bool dedicated = true; - - -- if (!data) -- return 0; -- -- mtd_node = data->of_node; -+ /* Pull of_node from the master device node */ -+ mtd_node = mtd_get_of_node(master); - if (!mtd_node) - return 0; - -@@ -72,8 +71,8 @@ static int parse_ofpart_partitions(struc - if (nr_parts == 0) - return 0; - -- *pparts = kzalloc(nr_parts * sizeof(**pparts), GFP_KERNEL); -- if (!*pparts) -+ parts = kzalloc(nr_parts * sizeof(*parts), GFP_KERNEL); -+ if (!parts) - return -ENOMEM; - - i = 0; -@@ -107,19 +106,19 @@ static int parse_ofpart_partitions(struc - goto ofpart_fail; - } - -- (*pparts)[i].offset = of_read_number(reg, a_cells); -- (*pparts)[i].size = of_read_number(reg + a_cells, s_cells); -+ parts[i].offset = of_read_number(reg, a_cells); -+ parts[i].size = of_read_number(reg + a_cells, s_cells); - - partname = of_get_property(pp, "label", &len); - if (!partname) - partname = of_get_property(pp, "name", &len); -- (*pparts)[i].name = partname; -+ parts[i].name = partname; - - if (of_get_property(pp, "read-only", &len)) -- (*pparts)[i].mask_flags |= MTD_WRITEABLE; -+ parts[i].mask_flags |= MTD_WRITEABLE; - - if (of_get_property(pp, "lock", &len)) -- (*pparts)[i].mask_flags |= MTD_POWERUP_LOCK; -+ parts[i].mask_flags |= MTD_POWERUP_LOCK; - - i++; - } -@@ -127,6 +126,7 @@ static int parse_ofpart_partitions(struc - if (!nr_parts) - goto ofpart_none; - -+ *pparts = parts; - return nr_parts; - - ofpart_fail: -@@ -135,21 +135,20 @@ ofpart_fail: - ret = -EINVAL; - ofpart_none: - of_node_put(pp); -- kfree(*pparts); -- *pparts = NULL; -+ kfree(parts); - return ret; - } - - static struct mtd_part_parser ofpart_parser = { -- .owner = THIS_MODULE, - .parse_fn = parse_ofpart_partitions, - .name = "ofpart", - }; - - static int parse_ofoldpart_partitions(struct mtd_info *master, -- struct mtd_partition **pparts, -+ const struct mtd_partition **pparts, - struct mtd_part_parser_data *data) - { -+ struct mtd_partition *parts; - struct device_node *dp; - int i, plen, nr_parts; - const struct { -@@ -157,10 +156,8 @@ static int parse_ofoldpart_partitions(st - } *part; - const char *names; - -- if (!data) -- return 0; -- -- dp = data->of_node; -+ /* Pull of_node from the master device node */ -+ dp = mtd_get_of_node(master); - if (!dp) - return 0; - -@@ -173,37 +170,37 @@ static int parse_ofoldpart_partitions(st - - nr_parts = plen / sizeof(part[0]); - -- *pparts = kzalloc(nr_parts * sizeof(*(*pparts)), GFP_KERNEL); -- if (!*pparts) -+ parts = kzalloc(nr_parts * sizeof(*parts), GFP_KERNEL); -+ if (!parts) - return -ENOMEM; - - names = of_get_property(dp, "partition-names", &plen); - - for (i = 0; i < nr_parts; i++) { -- (*pparts)[i].offset = be32_to_cpu(part->offset); -- (*pparts)[i].size = be32_to_cpu(part->len) & ~1; -+ parts[i].offset = be32_to_cpu(part->offset); -+ parts[i].size = be32_to_cpu(part->len) & ~1; - /* bit 0 set signifies read only partition */ - if (be32_to_cpu(part->len) & 1) -- (*pparts)[i].mask_flags = MTD_WRITEABLE; -+ parts[i].mask_flags = MTD_WRITEABLE; - - if (names && (plen > 0)) { - int len = strlen(names) + 1; - -- (*pparts)[i].name = names; -+ parts[i].name = names; - plen -= len; - names += len; - } else { -- (*pparts)[i].name = "unnamed"; -+ parts[i].name = "unnamed"; - } - - part++; - } - -+ *pparts = parts; - return nr_parts; - } - - static struct mtd_part_parser ofoldpart_parser = { -- .owner = THIS_MODULE, - .parse_fn = parse_ofoldpart_partitions, - .name = "ofoldpart", - }; ---- a/drivers/mtd/spi-nor/Kconfig -+++ b/drivers/mtd/spi-nor/Kconfig -@@ -7,6 +7,14 @@ menuconfig MTD_SPI_NOR - - if MTD_SPI_NOR - -+config MTD_MT81xx_NOR -+ tristate "Mediatek MT81xx SPI NOR flash controller" -+ depends on HAS_IOMEM -+ help -+ This enables access to SPI NOR flash, using MT81xx SPI NOR flash -+ controller. This controller does not support generic SPI BUS, it only -+ supports SPI NOR Flash. -+ - config MTD_SPI_NOR_USE_4K_SECTORS - bool "Use small 4096 B erase sectors" - default y -@@ -23,7 +31,7 @@ config MTD_SPI_NOR_USE_4K_SECTORS - - config SPI_FSL_QUADSPI - tristate "Freescale Quad SPI controller" -- depends on ARCH_MXC || COMPILE_TEST -+ depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST - depends on HAS_IOMEM - help - This enables support for the Quad SPI controller in master mode. ---- a/drivers/mtd/spi-nor/Makefile -+++ b/drivers/mtd/spi-nor/Makefile -@@ -1,3 +1,4 @@ - obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o - obj-$(CONFIG_SPI_FSL_QUADSPI) += fsl-quadspi.o -+obj-$(CONFIG_MTD_MT81xx_NOR) += mtk-quadspi.o - obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o ---- /dev/null -+++ b/drivers/mtd/spi-nor/mtk-quadspi.c -@@ -0,0 +1,485 @@ -+/* -+ * Copyright (c) 2015 MediaTek Inc. -+ * Author: Bayi Cheng -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define MTK_NOR_CMD_REG 0x00 -+#define MTK_NOR_CNT_REG 0x04 -+#define MTK_NOR_RDSR_REG 0x08 -+#define MTK_NOR_RDATA_REG 0x0c -+#define MTK_NOR_RADR0_REG 0x10 -+#define MTK_NOR_RADR1_REG 0x14 -+#define MTK_NOR_RADR2_REG 0x18 -+#define MTK_NOR_WDATA_REG 0x1c -+#define MTK_NOR_PRGDATA0_REG 0x20 -+#define MTK_NOR_PRGDATA1_REG 0x24 -+#define MTK_NOR_PRGDATA2_REG 0x28 -+#define MTK_NOR_PRGDATA3_REG 0x2c -+#define MTK_NOR_PRGDATA4_REG 0x30 -+#define MTK_NOR_PRGDATA5_REG 0x34 -+#define MTK_NOR_SHREG0_REG 0x38 -+#define MTK_NOR_SHREG1_REG 0x3c -+#define MTK_NOR_SHREG2_REG 0x40 -+#define MTK_NOR_SHREG3_REG 0x44 -+#define MTK_NOR_SHREG4_REG 0x48 -+#define MTK_NOR_SHREG5_REG 0x4c -+#define MTK_NOR_SHREG6_REG 0x50 -+#define MTK_NOR_SHREG7_REG 0x54 -+#define MTK_NOR_SHREG8_REG 0x58 -+#define MTK_NOR_SHREG9_REG 0x5c -+#define MTK_NOR_CFG1_REG 0x60 -+#define MTK_NOR_CFG2_REG 0x64 -+#define MTK_NOR_CFG3_REG 0x68 -+#define MTK_NOR_STATUS0_REG 0x70 -+#define MTK_NOR_STATUS1_REG 0x74 -+#define MTK_NOR_STATUS2_REG 0x78 -+#define MTK_NOR_STATUS3_REG 0x7c -+#define MTK_NOR_FLHCFG_REG 0x84 -+#define MTK_NOR_TIME_REG 0x94 -+#define MTK_NOR_PP_DATA_REG 0x98 -+#define MTK_NOR_PREBUF_STUS_REG 0x9c -+#define MTK_NOR_DELSEL0_REG 0xa0 -+#define MTK_NOR_DELSEL1_REG 0xa4 -+#define MTK_NOR_INTRSTUS_REG 0xa8 -+#define MTK_NOR_INTREN_REG 0xac -+#define MTK_NOR_CHKSUM_CTL_REG 0xb8 -+#define MTK_NOR_CHKSUM_REG 0xbc -+#define MTK_NOR_CMD2_REG 0xc0 -+#define MTK_NOR_WRPROT_REG 0xc4 -+#define MTK_NOR_RADR3_REG 0xc8 -+#define MTK_NOR_DUAL_REG 0xcc -+#define MTK_NOR_DELSEL2_REG 0xd0 -+#define MTK_NOR_DELSEL3_REG 0xd4 -+#define MTK_NOR_DELSEL4_REG 0xd8 -+ -+/* commands for mtk nor controller */ -+#define MTK_NOR_READ_CMD 0x0 -+#define MTK_NOR_RDSR_CMD 0x2 -+#define MTK_NOR_PRG_CMD 0x4 -+#define MTK_NOR_WR_CMD 0x10 -+#define MTK_NOR_PIO_WR_CMD 0x90 -+#define MTK_NOR_WRSR_CMD 0x20 -+#define MTK_NOR_PIO_READ_CMD 0x81 -+#define MTK_NOR_WR_BUF_ENABLE 0x1 -+#define MTK_NOR_WR_BUF_DISABLE 0x0 -+#define MTK_NOR_ENABLE_SF_CMD 0x30 -+#define MTK_NOR_DUAD_ADDR_EN 0x8 -+#define MTK_NOR_QUAD_READ_EN 0x4 -+#define MTK_NOR_DUAL_ADDR_EN 0x2 -+#define MTK_NOR_DUAL_READ_EN 0x1 -+#define MTK_NOR_DUAL_DISABLE 0x0 -+#define MTK_NOR_FAST_READ 0x1 -+ -+#define SFLASH_WRBUF_SIZE 128 -+ -+/* Can shift up to 48 bits (6 bytes) of TX/RX */ -+#define MTK_NOR_MAX_RX_TX_SHIFT 6 -+/* can shift up to 56 bits (7 bytes) transfer by MTK_NOR_PRG_CMD */ -+#define MTK_NOR_MAX_SHIFT 7 -+ -+/* Helpers for accessing the program data / shift data registers */ -+#define MTK_NOR_PRG_REG(n) (MTK_NOR_PRGDATA0_REG + 4 * (n)) -+#define MTK_NOR_SHREG(n) (MTK_NOR_SHREG0_REG + 4 * (n)) -+ -+struct mt8173_nor { -+ struct spi_nor nor; -+ struct device *dev; -+ void __iomem *base; /* nor flash base address */ -+ struct clk *spi_clk; -+ struct clk *nor_clk; -+}; -+ -+static void mt8173_nor_set_read_mode(struct mt8173_nor *mt8173_nor) -+{ -+ struct spi_nor *nor = &mt8173_nor->nor; -+ -+ switch (nor->flash_read) { -+ case SPI_NOR_FAST: -+ writeb(nor->read_opcode, mt8173_nor->base + -+ MTK_NOR_PRGDATA3_REG); -+ writeb(MTK_NOR_FAST_READ, mt8173_nor->base + -+ MTK_NOR_CFG1_REG); -+ break; -+ case SPI_NOR_DUAL: -+ writeb(nor->read_opcode, mt8173_nor->base + -+ MTK_NOR_PRGDATA3_REG); -+ writeb(MTK_NOR_DUAL_READ_EN, mt8173_nor->base + -+ MTK_NOR_DUAL_REG); -+ break; -+ case SPI_NOR_QUAD: -+ writeb(nor->read_opcode, mt8173_nor->base + -+ MTK_NOR_PRGDATA4_REG); -+ writeb(MTK_NOR_QUAD_READ_EN, mt8173_nor->base + -+ MTK_NOR_DUAL_REG); -+ break; -+ default: -+ writeb(MTK_NOR_DUAL_DISABLE, mt8173_nor->base + -+ MTK_NOR_DUAL_REG); -+ break; -+ } -+} -+ -+static int mt8173_nor_execute_cmd(struct mt8173_nor *mt8173_nor, u8 cmdval) -+{ -+ int reg; -+ u8 val = cmdval & 0x1f; -+ -+ writeb(cmdval, mt8173_nor->base + MTK_NOR_CMD_REG); -+ return readl_poll_timeout(mt8173_nor->base + MTK_NOR_CMD_REG, reg, -+ !(reg & val), 100, 10000); -+} -+ -+static int mt8173_nor_do_tx_rx(struct mt8173_nor *mt8173_nor, u8 op, -+ u8 *tx, int txlen, u8 *rx, int rxlen) -+{ -+ int len = 1 + txlen + rxlen; -+ int i, ret, idx; -+ -+ if (len > MTK_NOR_MAX_SHIFT) -+ return -EINVAL; -+ -+ writeb(len * 8, mt8173_nor->base + MTK_NOR_CNT_REG); -+ -+ /* start at PRGDATA5, go down to PRGDATA0 */ -+ idx = MTK_NOR_MAX_RX_TX_SHIFT - 1; -+ -+ /* opcode */ -+ writeb(op, mt8173_nor->base + MTK_NOR_PRG_REG(idx)); -+ idx--; -+ -+ /* program TX data */ -+ for (i = 0; i < txlen; i++, idx--) -+ writeb(tx[i], mt8173_nor->base + MTK_NOR_PRG_REG(idx)); -+ -+ /* clear out rest of TX registers */ -+ while (idx >= 0) { -+ writeb(0, mt8173_nor->base + MTK_NOR_PRG_REG(idx)); -+ idx--; -+ } -+ -+ ret = mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_PRG_CMD); -+ if (ret) -+ return ret; -+ -+ /* restart at first RX byte */ -+ idx = rxlen - 1; -+ -+ /* read out RX data */ -+ for (i = 0; i < rxlen; i++, idx--) -+ rx[i] = readb(mt8173_nor->base + MTK_NOR_SHREG(idx)); -+ -+ return 0; -+} -+ -+/* Do a WRSR (Write Status Register) command */ -+static int mt8173_nor_wr_sr(struct mt8173_nor *mt8173_nor, u8 sr) -+{ -+ writeb(sr, mt8173_nor->base + MTK_NOR_PRGDATA5_REG); -+ writeb(8, mt8173_nor->base + MTK_NOR_CNT_REG); -+ return mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_WRSR_CMD); -+} -+ -+static int mt8173_nor_write_buffer_enable(struct mt8173_nor *mt8173_nor) -+{ -+ u8 reg; -+ -+ /* the bit0 of MTK_NOR_CFG2_REG is pre-fetch buffer -+ * 0: pre-fetch buffer use for read -+ * 1: pre-fetch buffer use for page program -+ */ -+ writel(MTK_NOR_WR_BUF_ENABLE, mt8173_nor->base + MTK_NOR_CFG2_REG); -+ return readb_poll_timeout(mt8173_nor->base + MTK_NOR_CFG2_REG, reg, -+ 0x01 == (reg & 0x01), 100, 10000); -+} -+ -+static int mt8173_nor_write_buffer_disable(struct mt8173_nor *mt8173_nor) -+{ -+ u8 reg; -+ -+ writel(MTK_NOR_WR_BUF_DISABLE, mt8173_nor->base + MTK_NOR_CFG2_REG); -+ return readb_poll_timeout(mt8173_nor->base + MTK_NOR_CFG2_REG, reg, -+ MTK_NOR_WR_BUF_DISABLE == (reg & 0x1), 100, -+ 10000); -+} -+ -+static void mt8173_nor_set_addr(struct mt8173_nor *mt8173_nor, u32 addr) -+{ -+ int i; -+ -+ for (i = 0; i < 3; i++) { -+ writeb(addr & 0xff, mt8173_nor->base + MTK_NOR_RADR0_REG + i * 4); -+ addr >>= 8; -+ } -+ /* Last register is non-contiguous */ -+ writeb(addr & 0xff, mt8173_nor->base + MTK_NOR_RADR3_REG); -+} -+ -+static int mt8173_nor_read(struct spi_nor *nor, loff_t from, size_t length, -+ size_t *retlen, u_char *buffer) -+{ -+ int i, ret; -+ int addr = (int)from; -+ u8 *buf = (u8 *)buffer; -+ struct mt8173_nor *mt8173_nor = nor->priv; -+ -+ /* set mode for fast read mode ,dual mode or quad mode */ -+ mt8173_nor_set_read_mode(mt8173_nor); -+ mt8173_nor_set_addr(mt8173_nor, addr); -+ -+ for (i = 0; i < length; i++, (*retlen)++) { -+ ret = mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_PIO_READ_CMD); -+ if (ret < 0) -+ return ret; -+ buf[i] = readb(mt8173_nor->base + MTK_NOR_RDATA_REG); -+ } -+ return 0; -+} -+ -+static int mt8173_nor_write_single_byte(struct mt8173_nor *mt8173_nor, -+ int addr, int length, u8 *data) -+{ -+ int i, ret; -+ -+ mt8173_nor_set_addr(mt8173_nor, addr); -+ -+ for (i = 0; i < length; i++) { -+ writeb(*data++, mt8173_nor->base + MTK_NOR_WDATA_REG); -+ ret = mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_PIO_WR_CMD); -+ if (ret < 0) -+ return ret; -+ } -+ return 0; -+} -+ -+static int mt8173_nor_write_buffer(struct mt8173_nor *mt8173_nor, int addr, -+ const u8 *buf) -+{ -+ int i, bufidx, data; -+ -+ mt8173_nor_set_addr(mt8173_nor, addr); -+ -+ bufidx = 0; -+ for (i = 0; i < SFLASH_WRBUF_SIZE; i += 4) { -+ data = buf[bufidx + 3]<<24 | buf[bufidx + 2]<<16 | -+ buf[bufidx + 1]<<8 | buf[bufidx]; -+ bufidx += 4; -+ writel(data, mt8173_nor->base + MTK_NOR_PP_DATA_REG); -+ } -+ return mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_WR_CMD); -+} -+ -+static void mt8173_nor_write(struct spi_nor *nor, loff_t to, size_t len, -+ size_t *retlen, const u_char *buf) -+{ -+ int ret; -+ struct mt8173_nor *mt8173_nor = nor->priv; -+ -+ ret = mt8173_nor_write_buffer_enable(mt8173_nor); -+ if (ret < 0) -+ dev_warn(mt8173_nor->dev, "write buffer enable failed!\n"); -+ -+ while (len >= SFLASH_WRBUF_SIZE) { -+ ret = mt8173_nor_write_buffer(mt8173_nor, to, buf); -+ if (ret < 0) -+ dev_err(mt8173_nor->dev, "write buffer failed!\n"); -+ len -= SFLASH_WRBUF_SIZE; -+ to += SFLASH_WRBUF_SIZE; -+ buf += SFLASH_WRBUF_SIZE; -+ (*retlen) += SFLASH_WRBUF_SIZE; -+ } -+ ret = mt8173_nor_write_buffer_disable(mt8173_nor); -+ if (ret < 0) -+ dev_warn(mt8173_nor->dev, "write buffer disable failed!\n"); -+ -+ if (len) { -+ ret = mt8173_nor_write_single_byte(mt8173_nor, to, (int)len, -+ (u8 *)buf); -+ if (ret < 0) -+ dev_err(mt8173_nor->dev, "write single byte failed!\n"); -+ (*retlen) += len; -+ } -+} -+ -+static int mt8173_nor_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) -+{ -+ int ret; -+ struct mt8173_nor *mt8173_nor = nor->priv; -+ -+ switch (opcode) { -+ case SPINOR_OP_RDSR: -+ ret = mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_RDSR_CMD); -+ if (ret < 0) -+ return ret; -+ if (len == 1) -+ *buf = readb(mt8173_nor->base + MTK_NOR_RDSR_REG); -+ else -+ dev_err(mt8173_nor->dev, "len should be 1 for read status!\n"); -+ break; -+ default: -+ ret = mt8173_nor_do_tx_rx(mt8173_nor, opcode, NULL, 0, buf, len); -+ break; -+ } -+ return ret; -+} -+ -+static int mt8173_nor_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, -+ int len) -+{ -+ int ret; -+ struct mt8173_nor *mt8173_nor = nor->priv; -+ -+ switch (opcode) { -+ case SPINOR_OP_WRSR: -+ /* We only handle 1 byte */ -+ ret = mt8173_nor_wr_sr(mt8173_nor, *buf); -+ break; -+ default: -+ ret = mt8173_nor_do_tx_rx(mt8173_nor, opcode, buf, len, NULL, 0); -+ if (ret) -+ dev_warn(mt8173_nor->dev, "write reg failure!\n"); -+ break; -+ } -+ return ret; -+} -+ -+static int mtk_nor_init(struct mt8173_nor *mt8173_nor, -+ struct device_node *flash_node) -+{ -+ int ret; -+ struct spi_nor *nor; -+ -+ /* initialize controller to accept commands */ -+ writel(MTK_NOR_ENABLE_SF_CMD, mt8173_nor->base + MTK_NOR_WRPROT_REG); -+ -+ nor = &mt8173_nor->nor; -+ nor->dev = mt8173_nor->dev; -+ nor->priv = mt8173_nor; -+ spi_nor_set_flash_node(nor, flash_node); -+ -+ /* fill the hooks to spi nor */ -+ nor->read = mt8173_nor_read; -+ nor->read_reg = mt8173_nor_read_reg; -+ nor->write = mt8173_nor_write; -+ nor->write_reg = mt8173_nor_write_reg; -+ nor->mtd.name = "mtk_nor"; -+ /* initialized with NULL */ -+ ret = spi_nor_scan(nor, NULL, SPI_NOR_DUAL); -+ if (ret) -+ return ret; -+ -+ return mtd_device_register(&nor->mtd, NULL, 0); -+} -+ -+static int mtk_nor_drv_probe(struct platform_device *pdev) -+{ -+ struct device_node *flash_np; -+ struct resource *res; -+ int ret; -+ struct mt8173_nor *mt8173_nor; -+ -+ if (!pdev->dev.of_node) { -+ dev_err(&pdev->dev, "No DT found\n"); -+ return -EINVAL; -+ } -+ -+ mt8173_nor = devm_kzalloc(&pdev->dev, sizeof(*mt8173_nor), GFP_KERNEL); -+ if (!mt8173_nor) -+ return -ENOMEM; -+ platform_set_drvdata(pdev, mt8173_nor); -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ mt8173_nor->base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(mt8173_nor->base)) -+ return PTR_ERR(mt8173_nor->base); -+ -+ mt8173_nor->spi_clk = devm_clk_get(&pdev->dev, "spi"); -+ if (IS_ERR(mt8173_nor->spi_clk)) -+ return PTR_ERR(mt8173_nor->spi_clk); -+ -+ mt8173_nor->nor_clk = devm_clk_get(&pdev->dev, "sf"); -+ if (IS_ERR(mt8173_nor->nor_clk)) -+ return PTR_ERR(mt8173_nor->nor_clk); -+ -+ mt8173_nor->dev = &pdev->dev; -+ ret = clk_prepare_enable(mt8173_nor->spi_clk); -+ if (ret) -+ return ret; -+ -+ ret = clk_prepare_enable(mt8173_nor->nor_clk); -+ if (ret) { -+ clk_disable_unprepare(mt8173_nor->spi_clk); -+ return ret; -+ } -+ /* only support one attached flash */ -+ flash_np = of_get_next_available_child(pdev->dev.of_node, NULL); -+ if (!flash_np) { -+ dev_err(&pdev->dev, "no SPI flash device to configure\n"); -+ ret = -ENODEV; -+ goto nor_free; -+ } -+ ret = mtk_nor_init(mt8173_nor, flash_np); -+ -+nor_free: -+ if (ret) { -+ clk_disable_unprepare(mt8173_nor->spi_clk); -+ clk_disable_unprepare(mt8173_nor->nor_clk); -+ } -+ return ret; -+} -+ -+static int mtk_nor_drv_remove(struct platform_device *pdev) -+{ -+ struct mt8173_nor *mt8173_nor = platform_get_drvdata(pdev); -+ -+ clk_disable_unprepare(mt8173_nor->spi_clk); -+ clk_disable_unprepare(mt8173_nor->nor_clk); -+ return 0; -+} -+ -+static const struct of_device_id mtk_nor_of_ids[] = { -+ { .compatible = "mediatek,mt8173-nor"}, -+ { /* sentinel */ } -+}; -+MODULE_DEVICE_TABLE(of, mtk_nor_of_ids); -+ -+static struct platform_driver mtk_nor_driver = { -+ .probe = mtk_nor_drv_probe, -+ .remove = mtk_nor_drv_remove, -+ .driver = { -+ .name = "mtk-nor", -+ .of_match_table = mtk_nor_of_ids, -+ }, -+}; -+ -+module_platform_driver(mtk_nor_driver); -+MODULE_LICENSE("GPL v2"); -+MODULE_DESCRIPTION("MediaTek SPI NOR Flash Driver"); ---- a/drivers/mtd/spi-nor/spi-nor.c -+++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -38,6 +38,7 @@ - #define CHIP_ERASE_2MB_READY_WAIT_JIFFIES (40UL * HZ) - - #define SPI_NOR_MAX_ID_LEN 6 -+#define SPI_NOR_MAX_ADDR_WIDTH 4 - - struct flash_info { - char *name; -@@ -60,15 +61,20 @@ struct flash_info { - u16 addr_width; - - u16 flags; --#define SECT_4K 0x01 /* SPINOR_OP_BE_4K works uniformly */ --#define SPI_NOR_NO_ERASE 0x02 /* No erase command needed */ --#define SST_WRITE 0x04 /* use SST byte programming */ --#define SPI_NOR_NO_FR 0x08 /* Can't do fastread */ --#define SECT_4K_PMC 0x10 /* SPINOR_OP_BE_4K_PMC works uniformly */ --#define SPI_NOR_DUAL_READ 0x20 /* Flash supports Dual Read */ --#define SPI_NOR_QUAD_READ 0x40 /* Flash supports Quad Read */ --#define USE_FSR 0x80 /* use flag status register */ --#define SPI_NOR_HAS_LOCK 0x100 /* Flash supports lock/unlock via SR */ -+#define SECT_4K BIT(0) /* SPINOR_OP_BE_4K works uniformly */ -+#define SPI_NOR_NO_ERASE BIT(1) /* No erase command needed */ -+#define SST_WRITE BIT(2) /* use SST byte programming */ -+#define SPI_NOR_NO_FR BIT(3) /* Can't do fastread */ -+#define SECT_4K_PMC BIT(4) /* SPINOR_OP_BE_4K_PMC works uniformly */ -+#define SPI_NOR_DUAL_READ BIT(5) /* Flash supports Dual Read */ -+#define SPI_NOR_QUAD_READ BIT(6) /* Flash supports Quad Read */ -+#define USE_FSR BIT(7) /* use flag status register */ -+#define SPI_NOR_HAS_LOCK BIT(8) /* Flash supports lock/unlock via SR */ -+#define SPI_NOR_HAS_TB BIT(9) /* -+ * Flash SR has Top/Bottom (TB) protect -+ * bit. Must be used with -+ * SPI_NOR_HAS_LOCK. -+ */ - }; - - #define JEDEC_MFR(info) ((info)->id[0]) -@@ -314,6 +320,29 @@ static void spi_nor_unlock_and_unprep(st - } - - /* -+ * Initiate the erasure of a single sector -+ */ -+static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr) -+{ -+ u8 buf[SPI_NOR_MAX_ADDR_WIDTH]; -+ int i; -+ -+ if (nor->erase) -+ return nor->erase(nor, addr); -+ -+ /* -+ * Default implementation, if driver doesn't have a specialized HW -+ * control -+ */ -+ for (i = nor->addr_width - 1; i >= 0; i--) { -+ buf[i] = addr & 0xff; -+ addr >>= 8; -+ } -+ -+ return nor->write_reg(nor, nor->erase_opcode, buf, nor->addr_width); -+} -+ -+/* - * Erase an address range on the nor chip. The address range may extend - * one or more erase sectors. Return an error is there is a problem erasing. - */ -@@ -372,10 +401,9 @@ static int spi_nor_erase(struct mtd_info - while (len) { - write_enable(nor); - -- if (nor->erase(nor, addr)) { -- ret = -EIO; -+ ret = spi_nor_erase_sector(nor, addr); -+ if (ret) - goto erase_err; -- } - - addr += mtd->erasesize; - len -= mtd->erasesize; -@@ -388,17 +416,13 @@ static int spi_nor_erase(struct mtd_info - - write_disable(nor); - -+erase_err: - spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE); - -- instr->state = MTD_ERASE_DONE; -+ instr->state = ret ? MTD_ERASE_FAILED : MTD_ERASE_DONE; - mtd_erase_callback(instr); - - return ret; -- --erase_err: -- spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE); -- instr->state = MTD_ERASE_FAILED; -- return ret; - } - - static void stm_get_locked_range(struct spi_nor *nor, u8 sr, loff_t *ofs, -@@ -416,32 +440,58 @@ static void stm_get_locked_range(struct - } else { - pow = ((sr & mask) ^ mask) >> shift; - *len = mtd->size >> pow; -- *ofs = mtd->size - *len; -+ if (nor->flags & SNOR_F_HAS_SR_TB && sr & SR_TB) -+ *ofs = 0; -+ else -+ *ofs = mtd->size - *len; - } - } - - /* -- * Return 1 if the entire region is locked, 0 otherwise -+ * Return 1 if the entire region is locked (if @locked is true) or unlocked (if -+ * @locked is false); 0 otherwise - */ --static int stm_is_locked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len, -- u8 sr) -+static int stm_check_lock_status_sr(struct spi_nor *nor, loff_t ofs, uint64_t len, -+ u8 sr, bool locked) - { - loff_t lock_offs; - uint64_t lock_len; - -+ if (!len) -+ return 1; -+ - stm_get_locked_range(nor, sr, &lock_offs, &lock_len); - -- return (ofs + len <= lock_offs + lock_len) && (ofs >= lock_offs); -+ if (locked) -+ /* Requested range is a sub-range of locked range */ -+ return (ofs + len <= lock_offs + lock_len) && (ofs >= lock_offs); -+ else -+ /* Requested range does not overlap with locked range */ -+ return (ofs >= lock_offs + lock_len) || (ofs + len <= lock_offs); -+} -+ -+static int stm_is_locked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len, -+ u8 sr) -+{ -+ return stm_check_lock_status_sr(nor, ofs, len, sr, true); -+} -+ -+static int stm_is_unlocked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len, -+ u8 sr) -+{ -+ return stm_check_lock_status_sr(nor, ofs, len, sr, false); - } - - /* - * Lock a region of the flash. Compatible with ST Micro and similar flash. -- * Supports only the block protection bits BP{0,1,2} in the status register -+ * Supports the block protection bits BP{0,1,2} in the status register - * (SR). Does not support these features found in newer SR bitfields: -- * - TB: top/bottom protect - only handle TB=0 (top protect) - * - SEC: sector/block protect - only handle SEC=0 (block protect) - * - CMP: complement protect - only support CMP=0 (range is not complemented) - * -+ * Support for the following is provided conditionally for some flash: -+ * - TB: top/bottom protect -+ * - * Sample table portion for 8MB flash (Winbond w25q64fw): - * - * SEC | TB | BP2 | BP1 | BP0 | Prot Length | Protected Portion -@@ -454,26 +504,55 @@ static int stm_is_locked_sr(struct spi_n - * 0 | 0 | 1 | 0 | 1 | 2 MB | Upper 1/4 - * 0 | 0 | 1 | 1 | 0 | 4 MB | Upper 1/2 - * X | X | 1 | 1 | 1 | 8 MB | ALL -+ * ------|-------|-------|-------|-------|---------------|------------------- -+ * 0 | 1 | 0 | 0 | 1 | 128 KB | Lower 1/64 -+ * 0 | 1 | 0 | 1 | 0 | 256 KB | Lower 1/32 -+ * 0 | 1 | 0 | 1 | 1 | 512 KB | Lower 1/16 -+ * 0 | 1 | 1 | 0 | 0 | 1 MB | Lower 1/8 -+ * 0 | 1 | 1 | 0 | 1 | 2 MB | Lower 1/4 -+ * 0 | 1 | 1 | 1 | 0 | 4 MB | Lower 1/2 - * - * Returns negative on errors, 0 on success. - */ - static int stm_lock(struct spi_nor *nor, loff_t ofs, uint64_t len) - { - struct mtd_info *mtd = &nor->mtd; -- u8 status_old, status_new; -+ int status_old, status_new; - u8 mask = SR_BP2 | SR_BP1 | SR_BP0; - u8 shift = ffs(mask) - 1, pow, val; -+ loff_t lock_len; -+ bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB; -+ bool use_top; -+ int ret; - - status_old = read_sr(nor); -+ if (status_old < 0) -+ return status_old; - -- /* SPI NOR always locks to the end */ -- if (ofs + len != mtd->size) { -- /* Does combined region extend to end? */ -- if (!stm_is_locked_sr(nor, ofs + len, mtd->size - ofs - len, -- status_old)) -- return -EINVAL; -- len = mtd->size - ofs; -- } -+ /* If nothing in our range is unlocked, we don't need to do anything */ -+ if (stm_is_locked_sr(nor, ofs, len, status_old)) -+ return 0; -+ -+ /* If anything below us is unlocked, we can't use 'bottom' protection */ -+ if (!stm_is_locked_sr(nor, 0, ofs, status_old)) -+ can_be_bottom = false; -+ -+ /* If anything above us is unlocked, we can't use 'top' protection */ -+ if (!stm_is_locked_sr(nor, ofs + len, mtd->size - (ofs + len), -+ status_old)) -+ can_be_top = false; -+ -+ if (!can_be_bottom && !can_be_top) -+ return -EINVAL; -+ -+ /* Prefer top, if both are valid */ -+ use_top = can_be_top; -+ -+ /* lock_len: length of region that should end up locked */ -+ if (use_top) -+ lock_len = mtd->size - ofs; -+ else -+ lock_len = ofs + len; - - /* - * Need smallest pow such that: -@@ -484,7 +563,7 @@ static int stm_lock(struct spi_nor *nor, - * - * pow = ceil(log2(size / len)) = log2(size) - floor(log2(len)) - */ -- pow = ilog2(mtd->size) - ilog2(len); -+ pow = ilog2(mtd->size) - ilog2(lock_len); - val = mask - (pow << shift); - if (val & ~mask) - return -EINVAL; -@@ -492,14 +571,27 @@ static int stm_lock(struct spi_nor *nor, - if (!(val & mask)) - return -EINVAL; - -- status_new = (status_old & ~mask) | val; -+ status_new = (status_old & ~mask & ~SR_TB) | val; -+ -+ /* Disallow further writes if WP pin is asserted */ -+ status_new |= SR_SRWD; -+ -+ if (!use_top) -+ status_new |= SR_TB; -+ -+ /* Don't bother if they're the same */ -+ if (status_new == status_old) -+ return 0; - - /* Only modify protection if it will not unlock other areas */ -- if ((status_new & mask) <= (status_old & mask)) -+ if ((status_new & mask) < (status_old & mask)) - return -EINVAL; - - write_enable(nor); -- return write_sr(nor, status_new); -+ ret = write_sr(nor, status_new); -+ if (ret) -+ return ret; -+ return spi_nor_wait_till_ready(nor); - } - - /* -@@ -510,17 +602,43 @@ static int stm_lock(struct spi_nor *nor, - static int stm_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len) - { - struct mtd_info *mtd = &nor->mtd; -- uint8_t status_old, status_new; -+ int status_old, status_new; - u8 mask = SR_BP2 | SR_BP1 | SR_BP0; - u8 shift = ffs(mask) - 1, pow, val; -+ loff_t lock_len; -+ bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB; -+ bool use_top; -+ int ret; - - status_old = read_sr(nor); -+ if (status_old < 0) -+ return status_old; -+ -+ /* If nothing in our range is locked, we don't need to do anything */ -+ if (stm_is_unlocked_sr(nor, ofs, len, status_old)) -+ return 0; -+ -+ /* If anything below us is locked, we can't use 'top' protection */ -+ if (!stm_is_unlocked_sr(nor, 0, ofs, status_old)) -+ can_be_top = false; -+ -+ /* If anything above us is locked, we can't use 'bottom' protection */ -+ if (!stm_is_unlocked_sr(nor, ofs + len, mtd->size - (ofs + len), -+ status_old)) -+ can_be_bottom = false; - -- /* Cannot unlock; would unlock larger region than requested */ -- if (stm_is_locked_sr(nor, ofs - mtd->erasesize, mtd->erasesize, -- status_old)) -+ if (!can_be_bottom && !can_be_top) - return -EINVAL; - -+ /* Prefer top, if both are valid */ -+ use_top = can_be_top; -+ -+ /* lock_len: length of region that should remain locked */ -+ if (use_top) -+ lock_len = mtd->size - (ofs + len); -+ else -+ lock_len = ofs; -+ - /* - * Need largest pow such that: - * -@@ -530,8 +648,8 @@ static int stm_unlock(struct spi_nor *no - * - * pow = floor(log2(size / len)) = log2(size) - ceil(log2(len)) - */ -- pow = ilog2(mtd->size) - order_base_2(mtd->size - (ofs + len)); -- if (ofs + len == mtd->size) { -+ pow = ilog2(mtd->size) - order_base_2(lock_len); -+ if (lock_len == 0) { - val = 0; /* fully unlocked */ - } else { - val = mask - (pow << shift); -@@ -540,14 +658,28 @@ static int stm_unlock(struct spi_nor *no - return -EINVAL; - } - -- status_new = (status_old & ~mask) | val; -+ status_new = (status_old & ~mask & ~SR_TB) | val; -+ -+ /* Don't protect status register if we're fully unlocked */ -+ if (lock_len == mtd->size) -+ status_new &= ~SR_SRWD; -+ -+ if (!use_top) -+ status_new |= SR_TB; -+ -+ /* Don't bother if they're the same */ -+ if (status_new == status_old) -+ return 0; - - /* Only modify protection if it will not lock other areas */ -- if ((status_new & mask) >= (status_old & mask)) -+ if ((status_new & mask) > (status_old & mask)) - return -EINVAL; - - write_enable(nor); -- return write_sr(nor, status_new); -+ ret = write_sr(nor, status_new); -+ if (ret) -+ return ret; -+ return spi_nor_wait_till_ready(nor); - } - - /* -@@ -737,8 +869,8 @@ static const struct flash_info spi_nor_i - { "n25q032a", INFO(0x20bb16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) }, - { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) }, - { "n25q064a", INFO(0x20bb17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) }, -- { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) }, -- { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) }, -+ { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) }, -+ { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) }, - { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) }, - { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, - { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, -@@ -772,6 +904,7 @@ static const struct flash_info spi_nor_i - { "s25fl008k", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, - { "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, - { "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) }, -+ { "s25fl116k", INFO(0x014015, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, - { "s25fl132k", INFO(0x014016, 0, 64 * 1024, 64, SECT_4K) }, - { "s25fl164k", INFO(0x014017, 0, 64 * 1024, 128, SECT_4K) }, - { "s25fl204k", INFO(0x014013, 0, 64 * 1024, 8, SECT_4K | SPI_NOR_DUAL_READ) }, -@@ -835,11 +968,23 @@ static const struct flash_info spi_nor_i - { "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) }, - { "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) }, - { "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) }, -- { "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, -+ { -+ "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64, -+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | -+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) -+ }, - { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) }, - { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) }, -- { "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, -- { "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, -+ { -+ "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128, -+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | -+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) -+ }, -+ { -+ "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256, -+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | -+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) -+ }, - { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) }, - { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) }, - { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) }, -@@ -862,7 +1007,7 @@ static const struct flash_info *spi_nor_ - - tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN); - if (tmp < 0) { -- dev_dbg(nor->dev, " error %d reading JEDEC ID\n", tmp); -+ dev_dbg(nor->dev, "error %d reading JEDEC ID\n", tmp); - return ERR_PTR(tmp); - } - -@@ -873,7 +1018,7 @@ static const struct flash_info *spi_nor_ - return &spi_nor_ids[tmp]; - } - } -- dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %2x, %2x\n", -+ dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n", - id[0], id[1], id[2]); - return ERR_PTR(-ENODEV); - } -@@ -1019,6 +1164,8 @@ static int macronix_quad_enable(struct s - int ret, val; - - val = read_sr(nor); -+ if (val < 0) -+ return val; - write_enable(nor); - - write_sr(nor, val | SR_QUAD_EN_MX); -@@ -1107,7 +1254,7 @@ static int set_quad_mode(struct spi_nor - static int spi_nor_check(struct spi_nor *nor) - { - if (!nor->dev || !nor->read || !nor->write || -- !nor->read_reg || !nor->write_reg || !nor->erase) { -+ !nor->read_reg || !nor->write_reg) { - pr_err("spi-nor: please fill all the necessary fields!\n"); - return -EINVAL; - } -@@ -1120,7 +1267,7 @@ int spi_nor_scan(struct spi_nor *nor, co - const struct flash_info *info = NULL; - struct device *dev = nor->dev; - struct mtd_info *mtd = &nor->mtd; -- struct device_node *np = nor->flash_node; -+ struct device_node *np = spi_nor_get_flash_node(nor); - int ret; - int i; - -@@ -1174,6 +1321,7 @@ int spi_nor_scan(struct spi_nor *nor, co - info->flags & SPI_NOR_HAS_LOCK) { - write_enable(nor); - write_sr(nor, 0); -+ spi_nor_wait_till_ready(nor); - } - - if (!mtd->name) -@@ -1208,6 +1356,8 @@ int spi_nor_scan(struct spi_nor *nor, co - - if (info->flags & USE_FSR) - nor->flags |= SNOR_F_USE_FSR; -+ if (info->flags & SPI_NOR_HAS_TB) -+ nor->flags |= SNOR_F_HAS_SR_TB; - - #ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS - /* prefer "small sector" erase if possible */ -@@ -1310,6 +1460,12 @@ int spi_nor_scan(struct spi_nor *nor, co - nor->addr_width = 3; - } - -+ if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) { -+ dev_err(dev, "address width is too large: %u\n", -+ nor->addr_width); -+ return -EINVAL; -+ } -+ - nor->read_dummy = spi_nor_read_dummy_cycles(nor); - - dev_info(dev, "%s (%lld Kbytes)\n", info->name, ---- a/drivers/mtd/tests/mtd_nandecctest.c -+++ b/drivers/mtd/tests/mtd_nandecctest.c -@@ -187,7 +187,7 @@ static int double_bit_error_detect(void - __nand_calculate_ecc(error_data, size, calc_ecc); - ret = __nand_correct_data(error_data, error_ecc, calc_ecc, size); - -- return (ret == -1) ? 0 : -EINVAL; -+ return (ret == -EBADMSG) ? 0 : -EINVAL; - } - - static const struct nand_ecc_test nand_ecc_test[] = { ---- a/drivers/mtd/tests/oobtest.c -+++ b/drivers/mtd/tests/oobtest.c -@@ -215,19 +215,19 @@ static int verify_eraseblock(int ebnum) - pr_info("ignoring error as within bitflip_limit\n"); - } - -- if (use_offset != 0 || use_len < mtd->ecclayout->oobavail) { -+ if (use_offset != 0 || use_len < mtd->oobavail) { - int k; - - ops.mode = MTD_OPS_AUTO_OOB; - ops.len = 0; - ops.retlen = 0; -- ops.ooblen = mtd->ecclayout->oobavail; -+ ops.ooblen = mtd->oobavail; - ops.oobretlen = 0; - ops.ooboffs = 0; - ops.datbuf = NULL; - ops.oobbuf = readbuf; - err = mtd_read_oob(mtd, addr, &ops); -- if (err || ops.oobretlen != mtd->ecclayout->oobavail) { -+ if (err || ops.oobretlen != mtd->oobavail) { - pr_err("error: readoob failed at %#llx\n", - (long long)addr); - errcnt += 1; -@@ -244,7 +244,7 @@ static int verify_eraseblock(int ebnum) - /* verify post-(use_offset + use_len) area for 0xff */ - k = use_offset + use_len; - bitflips += memffshow(addr, k, readbuf + k, -- mtd->ecclayout->oobavail - k); -+ mtd->oobavail - k); - - if (bitflips > bitflip_limit) { - pr_err("error: verify failed at %#llx\n", -@@ -269,8 +269,8 @@ static int verify_eraseblock_in_one_go(i - struct mtd_oob_ops ops; - int err = 0; - loff_t addr = (loff_t)ebnum * mtd->erasesize; -- size_t len = mtd->ecclayout->oobavail * pgcnt; -- size_t oobavail = mtd->ecclayout->oobavail; -+ size_t len = mtd->oobavail * pgcnt; -+ size_t oobavail = mtd->oobavail; - size_t bitflips; - int i; - -@@ -394,8 +394,8 @@ static int __init mtd_oobtest_init(void) - goto out; - - use_offset = 0; -- use_len = mtd->ecclayout->oobavail; -- use_len_max = mtd->ecclayout->oobavail; -+ use_len = mtd->oobavail; -+ use_len_max = mtd->oobavail; - vary_offset = 0; - - /* First test: write all OOB, read it back and verify */ -@@ -460,8 +460,8 @@ static int __init mtd_oobtest_init(void) - - /* Write all eraseblocks */ - use_offset = 0; -- use_len = mtd->ecclayout->oobavail; -- use_len_max = mtd->ecclayout->oobavail; -+ use_len = mtd->oobavail; -+ use_len_max = mtd->oobavail; - vary_offset = 1; - prandom_seed_state(&rnd_state, 5); - -@@ -471,8 +471,8 @@ static int __init mtd_oobtest_init(void) - - /* Check all eraseblocks */ - use_offset = 0; -- use_len = mtd->ecclayout->oobavail; -- use_len_max = mtd->ecclayout->oobavail; -+ use_len = mtd->oobavail; -+ use_len_max = mtd->oobavail; - vary_offset = 1; - prandom_seed_state(&rnd_state, 5); - err = verify_all_eraseblocks(); -@@ -480,8 +480,8 @@ static int __init mtd_oobtest_init(void) - goto out; - - use_offset = 0; -- use_len = mtd->ecclayout->oobavail; -- use_len_max = mtd->ecclayout->oobavail; -+ use_len = mtd->oobavail; -+ use_len_max = mtd->oobavail; - vary_offset = 0; - - /* Fourth test: try to write off end of device */ -@@ -501,7 +501,7 @@ static int __init mtd_oobtest_init(void) - ops.retlen = 0; - ops.ooblen = 1; - ops.oobretlen = 0; -- ops.ooboffs = mtd->ecclayout->oobavail; -+ ops.ooboffs = mtd->oobavail; - ops.datbuf = NULL; - ops.oobbuf = writebuf; - pr_info("attempting to start write past end of OOB\n"); -@@ -521,7 +521,7 @@ static int __init mtd_oobtest_init(void) - ops.retlen = 0; - ops.ooblen = 1; - ops.oobretlen = 0; -- ops.ooboffs = mtd->ecclayout->oobavail; -+ ops.ooboffs = mtd->oobavail; - ops.datbuf = NULL; - ops.oobbuf = readbuf; - pr_info("attempting to start read past end of OOB\n"); -@@ -543,7 +543,7 @@ static int __init mtd_oobtest_init(void) - ops.mode = MTD_OPS_AUTO_OOB; - ops.len = 0; - ops.retlen = 0; -- ops.ooblen = mtd->ecclayout->oobavail + 1; -+ ops.ooblen = mtd->oobavail + 1; - ops.oobretlen = 0; - ops.ooboffs = 0; - ops.datbuf = NULL; -@@ -563,7 +563,7 @@ static int __init mtd_oobtest_init(void) - ops.mode = MTD_OPS_AUTO_OOB; - ops.len = 0; - ops.retlen = 0; -- ops.ooblen = mtd->ecclayout->oobavail + 1; -+ ops.ooblen = mtd->oobavail + 1; - ops.oobretlen = 0; - ops.ooboffs = 0; - ops.datbuf = NULL; -@@ -587,7 +587,7 @@ static int __init mtd_oobtest_init(void) - ops.mode = MTD_OPS_AUTO_OOB; - ops.len = 0; - ops.retlen = 0; -- ops.ooblen = mtd->ecclayout->oobavail; -+ ops.ooblen = mtd->oobavail; - ops.oobretlen = 0; - ops.ooboffs = 1; - ops.datbuf = NULL; -@@ -607,7 +607,7 @@ static int __init mtd_oobtest_init(void) - ops.mode = MTD_OPS_AUTO_OOB; - ops.len = 0; - ops.retlen = 0; -- ops.ooblen = mtd->ecclayout->oobavail; -+ ops.ooblen = mtd->oobavail; - ops.oobretlen = 0; - ops.ooboffs = 1; - ops.datbuf = NULL; -@@ -638,7 +638,7 @@ static int __init mtd_oobtest_init(void) - for (i = 0; i < ebcnt - 1; ++i) { - int cnt = 2; - int pg; -- size_t sz = mtd->ecclayout->oobavail; -+ size_t sz = mtd->oobavail; - if (bbt[i] || bbt[i + 1]) - continue; - addr = (loff_t)(i + 1) * mtd->erasesize - mtd->writesize; -@@ -673,13 +673,12 @@ static int __init mtd_oobtest_init(void) - for (i = 0; i < ebcnt - 1; ++i) { - if (bbt[i] || bbt[i + 1]) - continue; -- prandom_bytes_state(&rnd_state, writebuf, -- mtd->ecclayout->oobavail * 2); -+ prandom_bytes_state(&rnd_state, writebuf, mtd->oobavail * 2); - addr = (loff_t)(i + 1) * mtd->erasesize - mtd->writesize; - ops.mode = MTD_OPS_AUTO_OOB; - ops.len = 0; - ops.retlen = 0; -- ops.ooblen = mtd->ecclayout->oobavail * 2; -+ ops.ooblen = mtd->oobavail * 2; - ops.oobretlen = 0; - ops.ooboffs = 0; - ops.datbuf = NULL; -@@ -688,7 +687,7 @@ static int __init mtd_oobtest_init(void) - if (err) - goto out; - if (memcmpshow(addr, readbuf, writebuf, -- mtd->ecclayout->oobavail * 2)) { -+ mtd->oobavail * 2)) { - pr_err("error: verify failed at %#llx\n", - (long long)addr); - errcnt += 1; ---- a/drivers/mtd/tests/pagetest.c -+++ b/drivers/mtd/tests/pagetest.c -@@ -127,13 +127,12 @@ static int crosstest(void) - unsigned char *pp1, *pp2, *pp3, *pp4; - - pr_info("crosstest\n"); -- pp1 = kmalloc(pgsize * 4, GFP_KERNEL); -+ pp1 = kzalloc(pgsize * 4, GFP_KERNEL); - if (!pp1) - return -ENOMEM; - pp2 = pp1 + pgsize; - pp3 = pp2 + pgsize; - pp4 = pp3 + pgsize; -- memset(pp1, 0, pgsize * 4); - - addr0 = 0; - for (i = 0; i < ebcnt && bbt[i]; ++i) ---- a/include/linux/mtd/bbm.h -+++ b/include/linux/mtd/bbm.h -@@ -166,7 +166,6 @@ struct bbm_info { - }; - - /* OneNAND BBT interface */ --extern int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd); - extern int onenand_default_bbt(struct mtd_info *mtd); - - #endif /* __LINUX_MTD_BBM_H */ ---- a/include/linux/mtd/fsmc.h -+++ b/include/linux/mtd/fsmc.h -@@ -103,24 +103,6 @@ - - #define FSMC_BUSY_WAIT_TIMEOUT (1 * HZ) - --/* -- * There are 13 bytes of ecc for every 512 byte block in FSMC version 8 -- * and it has to be read consecutively and immediately after the 512 -- * byte data block for hardware to generate the error bit offsets -- * Managing the ecc bytes in the following way is easier. This way is -- * similar to oobfree structure maintained already in u-boot nand driver -- */ --#define MAX_ECCPLACE_ENTRIES 32 -- --struct fsmc_nand_eccplace { -- uint8_t offset; -- uint8_t length; --}; -- --struct fsmc_eccplace { -- struct fsmc_nand_eccplace eccplace[MAX_ECCPLACE_ENTRIES]; --}; -- - struct fsmc_nand_timings { - uint8_t tclr; - uint8_t tar; ---- a/include/linux/mtd/inftl.h -+++ b/include/linux/mtd/inftl.h -@@ -44,7 +44,6 @@ struct INFTLrecord { - unsigned int nb_blocks; /* number of physical blocks */ - unsigned int nb_boot_blocks; /* number of blocks used by the bios */ - struct erase_info instr; -- struct nand_ecclayout oobinfo; - }; - - int INFTL_mount(struct INFTLrecord *s); ---- a/include/linux/mtd/map.h -+++ b/include/linux/mtd/map.h -@@ -137,7 +137,9 @@ - #endif - - #ifndef map_bankwidth -+#ifdef CONFIG_MTD - #warning "No CONFIG_MTD_MAP_BANK_WIDTH_xx selected. No NOR chip support can work" -+#endif - static inline int map_bankwidth(void *map) - { - BUG(); -@@ -233,8 +235,11 @@ struct map_info { - If there is no cache to care about this can be set to NULL. */ - void (*inval_cache)(struct map_info *, unsigned long, ssize_t); - -- /* set_vpp() must handle being reentered -- enable, enable, disable -- must leave it enabled. */ -+ /* This will be called with 1 as parameter when the first map user -+ * needs VPP, and called with 0 when the last user exits. The map -+ * core maintains a reference counter, and assumes that VPP is a -+ * global resource applying to all mapped flash chips on the system. -+ */ - void (*set_vpp)(struct map_info *, int); - - unsigned long pfow_base; ---- a/include/linux/mtd/mtd.h -+++ b/include/linux/mtd/mtd.h -@@ -100,17 +100,35 @@ struct mtd_oob_ops { - - #define MTD_MAX_OOBFREE_ENTRIES_LARGE 32 - #define MTD_MAX_ECCPOS_ENTRIES_LARGE 640 -+/** -+ * struct mtd_oob_region - oob region definition -+ * @offset: region offset -+ * @length: region length -+ * -+ * This structure describes a region of the OOB area, and is used -+ * to retrieve ECC or free bytes sections. -+ * Each section is defined by an offset within the OOB area and a -+ * length. -+ */ -+struct mtd_oob_region { -+ u32 offset; -+ u32 length; -+}; -+ - /* -- * Internal ECC layout control structure. For historical reasons, there is a -- * similar, smaller struct nand_ecclayout_user (in mtd-abi.h) that is retained -- * for export to user-space via the ECCGETLAYOUT ioctl. -- * nand_ecclayout should be expandable in the future simply by the above macros. -+ * struct mtd_ooblayout_ops - NAND OOB layout operations -+ * @ecc: function returning an ECC region in the OOB area. -+ * Should return -ERANGE if %section exceeds the total number of -+ * ECC sections. -+ * @free: function returning a free region in the OOB area. -+ * Should return -ERANGE if %section exceeds the total number of -+ * free sections. - */ --struct nand_ecclayout { -- __u32 eccbytes; -- __u32 eccpos[MTD_MAX_ECCPOS_ENTRIES_LARGE]; -- __u32 oobavail; -- struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES_LARGE]; -+struct mtd_ooblayout_ops { -+ int (*ecc)(struct mtd_info *mtd, int section, -+ struct mtd_oob_region *oobecc); -+ int (*free)(struct mtd_info *mtd, int section, -+ struct mtd_oob_region *oobfree); - }; - - struct module; /* only needed for owner field in mtd_info */ -@@ -171,8 +189,8 @@ struct mtd_info { - const char *name; - int index; - -- /* ECC layout structure pointer - read only! */ -- struct nand_ecclayout *ecclayout; -+ /* OOB layout description */ -+ const struct mtd_ooblayout_ops *ooblayout; - - /* the ecc step size. */ - unsigned int ecc_step_size; -@@ -258,6 +276,46 @@ struct mtd_info { - int usecount; - }; - -+int mtd_ooblayout_ecc(struct mtd_info *mtd, int section, -+ struct mtd_oob_region *oobecc); -+int mtd_ooblayout_find_eccregion(struct mtd_info *mtd, int eccbyte, -+ int *section, -+ struct mtd_oob_region *oobregion); -+int mtd_ooblayout_get_eccbytes(struct mtd_info *mtd, u8 *eccbuf, -+ const u8 *oobbuf, int start, int nbytes); -+int mtd_ooblayout_set_eccbytes(struct mtd_info *mtd, const u8 *eccbuf, -+ u8 *oobbuf, int start, int nbytes); -+int mtd_ooblayout_free(struct mtd_info *mtd, int section, -+ struct mtd_oob_region *oobfree); -+int mtd_ooblayout_get_databytes(struct mtd_info *mtd, u8 *databuf, -+ const u8 *oobbuf, int start, int nbytes); -+int mtd_ooblayout_set_databytes(struct mtd_info *mtd, const u8 *databuf, -+ u8 *oobbuf, int start, int nbytes); -+int mtd_ooblayout_count_freebytes(struct mtd_info *mtd); -+int mtd_ooblayout_count_eccbytes(struct mtd_info *mtd); -+ -+static inline void mtd_set_ooblayout(struct mtd_info *mtd, -+ const struct mtd_ooblayout_ops *ooblayout) -+{ -+ mtd->ooblayout = ooblayout; -+} -+ -+static inline void mtd_set_of_node(struct mtd_info *mtd, -+ struct device_node *np) -+{ -+ mtd->dev.of_node = np; -+} -+ -+static inline struct device_node *mtd_get_of_node(struct mtd_info *mtd) -+{ -+ return mtd->dev.of_node; -+} -+ -+static inline int mtd_oobavail(struct mtd_info *mtd, struct mtd_oob_ops *ops) -+{ -+ return ops->mode == MTD_OPS_AUTO_OOB ? mtd->oobavail : mtd->oobsize; -+} -+ - int mtd_erase(struct mtd_info *mtd, struct erase_info *instr); - int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, - void **virt, resource_size_t *phys); ---- a/include/linux/mtd/nand.h -+++ b/include/linux/mtd/nand.h -@@ -119,6 +119,12 @@ typedef enum { - NAND_ECC_SOFT_BCH, - } nand_ecc_modes_t; - -+enum nand_ecc_algo { -+ NAND_ECC_UNKNOWN, -+ NAND_ECC_HAMMING, -+ NAND_ECC_BCH, -+}; -+ - /* - * Constants for Hardware ECC - */ -@@ -129,6 +135,14 @@ typedef enum { - /* Enable Hardware ECC before syndrome is read back from flash */ - #define NAND_ECC_READSYN 2 - -+/* -+ * Enable generic NAND 'page erased' check. This check is only done when -+ * ecc.correct() returns -EBADMSG. -+ * Set this flag if your implementation does not fix bitflips in erased -+ * pages and you want to rely on the default implementation. -+ */ -+#define NAND_ECC_GENERIC_ERASED_CHECK BIT(0) -+ - /* Bit mask for flags passed to do_nand_read_ecc */ - #define NAND_GET_DEVICE 0x80 - -@@ -160,6 +174,12 @@ typedef enum { - /* Device supports subpage reads */ - #define NAND_SUBPAGE_READ 0x00001000 - -+/* -+ * Some MLC NANDs need data scrambling to limit bitflips caused by repeated -+ * patterns. -+ */ -+#define NAND_NEED_SCRAMBLING 0x00002000 -+ - /* Options valid for Samsung large page devices */ - #define NAND_SAMSUNG_LP_OPTIONS NAND_CACHEPRG - -@@ -276,15 +296,15 @@ struct nand_onfi_params { - __le16 t_r; - __le16 t_ccs; - __le16 src_sync_timing_mode; -- __le16 src_ssync_features; -+ u8 src_ssync_features; - __le16 clk_pin_capacitance_typ; - __le16 io_pin_capacitance_typ; - __le16 input_pin_capacitance_typ; - u8 input_pin_capacitance_max; - u8 driver_strength_support; - __le16 t_int_r; -- __le16 t_ald; -- u8 reserved4[7]; -+ __le16 t_adl; -+ u8 reserved4[8]; - - /* vendor */ - __le16 vendor_revision; -@@ -407,7 +427,7 @@ struct nand_jedec_params { - __le16 input_pin_capacitance_typ; - __le16 clk_pin_capacitance_typ; - u8 driver_strength_support; -- __le16 t_ald; -+ __le16 t_adl; - u8 reserved4[36]; - - /* ECC and endurance block */ -@@ -444,6 +464,7 @@ struct nand_hw_control { - /** - * struct nand_ecc_ctrl - Control structure for ECC - * @mode: ECC mode -+ * @algo: ECC algorithm - * @steps: number of ECC steps per page - * @size: data bytes per ECC step - * @bytes: ECC bytes per step -@@ -451,12 +472,18 @@ struct nand_hw_control { - * @total: total number of ECC bytes per page - * @prepad: padding information for syndrome based ECC generators - * @postpad: padding information for syndrome based ECC generators -- * @layout: ECC layout control struct pointer -+ * @options: ECC specific options (see NAND_ECC_XXX flags defined above) - * @priv: pointer to private ECC control data - * @hwctl: function to control hardware ECC generator. Must only - * be provided if an hardware ECC is available - * @calculate: function for ECC calculation or readback from ECC hardware -- * @correct: function for ECC correction, matching to ECC generator (sw/hw) -+ * @correct: function for ECC correction, matching to ECC generator (sw/hw). -+ * Should return a positive number representing the number of -+ * corrected bitflips, -EBADMSG if the number of bitflips exceed -+ * ECC strength, or any other error code if the error is not -+ * directly related to correction. -+ * If -EBADMSG is returned the input buffers should be left -+ * untouched. - * @read_page_raw: function to read a raw page without ECC. This function - * should hide the specific layout used by the ECC - * controller and always return contiguous in-band and -@@ -487,6 +514,7 @@ struct nand_hw_control { - */ - struct nand_ecc_ctrl { - nand_ecc_modes_t mode; -+ enum nand_ecc_algo algo; - int steps; - int size; - int bytes; -@@ -494,7 +522,7 @@ struct nand_ecc_ctrl { - int strength; - int prepad; - int postpad; -- struct nand_ecclayout *layout; -+ unsigned int options; - void *priv; - void (*hwctl)(struct mtd_info *mtd, int mode); - int (*calculate)(struct mtd_info *mtd, const uint8_t *dat, -@@ -540,11 +568,11 @@ struct nand_buffers { - - /** - * struct nand_chip - NAND Private Flash Chip Data -+ * @mtd: MTD device registered to the MTD framework - * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the - * flash device - * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the - * flash device. -- * @flash_node: [BOARDSPECIFIC] device node describing this instance - * @read_byte: [REPLACEABLE] read one byte from the chip - * @read_word: [REPLACEABLE] read one word from the chip - * @write_byte: [REPLACEABLE] write a single byte to the chip on the -@@ -640,18 +668,17 @@ struct nand_buffers { - */ - - struct nand_chip { -+ struct mtd_info mtd; - void __iomem *IO_ADDR_R; - void __iomem *IO_ADDR_W; - -- struct device_node *flash_node; -- - uint8_t (*read_byte)(struct mtd_info *mtd); - u16 (*read_word)(struct mtd_info *mtd); - void (*write_byte)(struct mtd_info *mtd, uint8_t byte); - void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len); - void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len); - void (*select_chip)(struct mtd_info *mtd, int chip); -- int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip); -+ int (*block_bad)(struct mtd_info *mtd, loff_t ofs); - int (*block_markbad)(struct mtd_info *mtd, loff_t ofs); - void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl); - int (*dev_ready)(struct mtd_info *mtd); -@@ -719,6 +746,40 @@ struct nand_chip { - void *priv; - }; - -+extern const struct mtd_ooblayout_ops nand_ooblayout_sp_ops; -+extern const struct mtd_ooblayout_ops nand_ooblayout_lp_ops; -+ -+static inline void nand_set_flash_node(struct nand_chip *chip, -+ struct device_node *np) -+{ -+ mtd_set_of_node(&chip->mtd, np); -+} -+ -+static inline struct device_node *nand_get_flash_node(struct nand_chip *chip) -+{ -+ return mtd_get_of_node(&chip->mtd); -+} -+ -+static inline struct nand_chip *mtd_to_nand(struct mtd_info *mtd) -+{ -+ return container_of(mtd, struct nand_chip, mtd); -+} -+ -+static inline struct mtd_info *nand_to_mtd(struct nand_chip *chip) -+{ -+ return &chip->mtd; -+} -+ -+static inline void *nand_get_controller_data(struct nand_chip *chip) -+{ -+ return chip->priv; -+} -+ -+static inline void nand_set_controller_data(struct nand_chip *chip, void *priv) -+{ -+ chip->priv = priv; -+} -+ - /* - * NAND Flash Manufacturer ID Codes - */ -@@ -851,7 +912,6 @@ extern int nand_do_read(struct mtd_info - * @chip_delay: R/B delay value in us - * @options: Option flags, e.g. 16bit buswidth - * @bbt_options: BBT option flags, e.g. NAND_BBT_USE_FLASH -- * @ecclayout: ECC layout info structure - * @part_probe_types: NULL-terminated array of probe types - */ - struct platform_nand_chip { -@@ -859,7 +919,6 @@ struct platform_nand_chip { - int chip_offset; - int nr_partitions; - struct mtd_partition *partitions; -- struct nand_ecclayout *ecclayout; - int chip_delay; - unsigned int options; - unsigned int bbt_options; -@@ -909,15 +968,6 @@ struct platform_nand_data { - struct platform_nand_ctrl ctrl; - }; - --/* Some helpers to access the data structures */ --static inline --struct platform_nand_chip *get_platform_nandchip(struct mtd_info *mtd) --{ -- struct nand_chip *chip = mtd->priv; -- -- return chip->priv; --} -- - /* return the supported features. */ - static inline int onfi_feature(struct nand_chip *chip) - { ---- a/include/linux/mtd/nand_bch.h -+++ b/include/linux/mtd/nand_bch.h -@@ -32,9 +32,7 @@ int nand_bch_correct_data(struct mtd_inf - /* - * Initialize BCH encoder/decoder - */ --struct nand_bch_control * --nand_bch_init(struct mtd_info *mtd, unsigned int eccsize, -- unsigned int eccbytes, struct nand_ecclayout **ecclayout); -+struct nand_bch_control *nand_bch_init(struct mtd_info *mtd); - /* - * Release BCH encoder/decoder resources - */ -@@ -55,12 +53,10 @@ static inline int - nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf, - unsigned char *read_ecc, unsigned char *calc_ecc) - { -- return -1; -+ return -ENOTSUPP; - } - --static inline struct nand_bch_control * --nand_bch_init(struct mtd_info *mtd, unsigned int eccsize, -- unsigned int eccbytes, struct nand_ecclayout **ecclayout) -+static inline struct nand_bch_control *nand_bch_init(struct mtd_info *mtd) - { - return NULL; - } ---- a/include/linux/mtd/nftl.h -+++ b/include/linux/mtd/nftl.h -@@ -50,7 +50,6 @@ struct NFTLrecord { - unsigned int nb_blocks; /* number of physical blocks */ - unsigned int nb_boot_blocks; /* number of blocks used by the bios */ - struct erase_info instr; -- struct nand_ecclayout oobinfo; - }; - - int NFTL_mount(struct NFTLrecord *s); ---- a/include/linux/mtd/onenand.h -+++ b/include/linux/mtd/onenand.h -@@ -80,7 +80,6 @@ struct onenand_bufferram { - * @page_buf: [INTERN] page main data buffer - * @oob_buf: [INTERN] page oob data buffer - * @subpagesize: [INTERN] holds the subpagesize -- * @ecclayout: [REPLACEABLE] the default ecc placement scheme - * @bbm: [REPLACEABLE] pointer to Bad Block Management - * @priv: [OPTIONAL] pointer to private chip date - */ -@@ -134,7 +133,6 @@ struct onenand_chip { - #endif - - int subpagesize; -- struct nand_ecclayout *ecclayout; - - void *bbm; - ---- a/include/linux/mtd/partitions.h -+++ b/include/linux/mtd/partitions.h -@@ -42,7 +42,6 @@ struct mtd_partition { - uint64_t size; /* partition size */ - uint64_t offset; /* offset within the master MTD space */ - uint32_t mask_flags; /* master MTD flags to mask out for this partition */ -- struct nand_ecclayout *ecclayout; /* out of band layout for this partition (NAND only) */ - }; - - #define MTDPART_OFS_RETAIN (-3) -@@ -56,11 +55,9 @@ struct device_node; - /** - * struct mtd_part_parser_data - used to pass data to MTD partition parsers. - * @origin: for RedBoot, start address of MTD device -- * @of_node: for OF parsers, device node containing partitioning information - */ - struct mtd_part_parser_data { - unsigned long origin; -- struct device_node *of_node; - }; - - -@@ -78,14 +75,34 @@ struct mtd_part_parser { - struct list_head list; - struct module *owner; - const char *name; -- int (*parse_fn)(struct mtd_info *, struct mtd_partition **, -+ int (*parse_fn)(struct mtd_info *, const struct mtd_partition **, - struct mtd_part_parser_data *); -+ void (*cleanup)(const struct mtd_partition *pparts, int nr_parts); - enum mtd_parser_type type; - }; - --extern void register_mtd_parser(struct mtd_part_parser *parser); -+/* Container for passing around a set of parsed partitions */ -+struct mtd_partitions { -+ const struct mtd_partition *parts; -+ int nr_parts; -+ const struct mtd_part_parser *parser; -+}; -+ -+extern int __register_mtd_parser(struct mtd_part_parser *parser, -+ struct module *owner); -+#define register_mtd_parser(parser) __register_mtd_parser(parser, THIS_MODULE) -+ - extern void deregister_mtd_parser(struct mtd_part_parser *parser); - -+/* -+ * module_mtd_part_parser() - Helper macro for MTD partition parsers that don't -+ * do anything special in module init/exit. Each driver may only use this macro -+ * once, and calling it replaces module_init() and module_exit(). -+ */ -+#define module_mtd_part_parser(__mtd_part_parser) \ -+ module_driver(__mtd_part_parser, register_mtd_parser, \ -+ deregister_mtd_parser) -+ - int mtd_is_partition(const struct mtd_info *mtd); - int mtd_add_partition(struct mtd_info *master, const char *name, - long long offset, long long length); ---- a/include/linux/mtd/sh_flctl.h -+++ b/include/linux/mtd/sh_flctl.h -@@ -143,7 +143,6 @@ enum flctl_ecc_res_t { - struct dma_chan; - - struct sh_flctl { -- struct mtd_info mtd; - struct nand_chip chip; - struct platform_device *pdev; - struct dev_pm_qos_request pm_qos; -@@ -187,7 +186,7 @@ struct sh_flctl_platform_data { - - static inline struct sh_flctl *mtd_to_flctl(struct mtd_info *mtdinfo) - { -- return container_of(mtdinfo, struct sh_flctl, mtd); -+ return container_of(mtd_to_nand(mtdinfo), struct sh_flctl, chip); - } - - #endif /* __SH_FLCTL_H__ */ ---- a/include/linux/mtd/sharpsl.h -+++ b/include/linux/mtd/sharpsl.h -@@ -14,7 +14,7 @@ - - struct sharpsl_nand_platform_data { - struct nand_bbt_descr *badblock_pattern; -- struct nand_ecclayout *ecc_layout; -+ const struct mtd_ooblayout_ops *ecc_layout; - struct mtd_partition *partitions; - unsigned int nr_partitions; - }; ---- a/include/uapi/mtd/mtd-abi.h -+++ b/include/uapi/mtd/mtd-abi.h -@@ -228,7 +228,7 @@ struct nand_oobfree { - * complete set of ECC information. The ioctl truncates the larger internal - * structure to retain binary compatibility with the static declaration of the - * ioctl. Note that the "MTD_MAX_..._ENTRIES" macros represent the max size of -- * the user struct, not the MAX size of the internal struct nand_ecclayout. -+ * the user struct, not the MAX size of the internal OOB layout representation. - */ - struct nand_ecclayout_user { - __u32 eccbytes; ---- a/fs/jffs2/wbuf.c -+++ b/fs/jffs2/wbuf.c -@@ -1153,7 +1153,7 @@ static struct jffs2_sb_info *work_to_sb( - { - struct delayed_work *dwork; - -- dwork = container_of(work, struct delayed_work, work); -+ dwork = to_delayed_work(work); - return container_of(dwork, struct jffs2_sb_info, wbuf_dwork); - } - -@@ -1183,22 +1183,20 @@ void jffs2_dirty_trigger(struct jffs2_sb - - int jffs2_nand_flash_setup(struct jffs2_sb_info *c) - { -- struct nand_ecclayout *oinfo = c->mtd->ecclayout; -- - if (!c->mtd->oobsize) - return 0; - - /* Cleanmarker is out-of-band, so inline size zero */ - c->cleanmarker_size = 0; - -- if (!oinfo || oinfo->oobavail == 0) { -+ if (c->mtd->oobavail == 0) { - pr_err("inconsistent device description\n"); - return -EINVAL; - } - - jffs2_dbg(1, "using OOB on NAND\n"); - -- c->oobavail = oinfo->oobavail; -+ c->oobavail = c->mtd->oobavail; - - /* Initialise write buffer */ - init_rwsem(&c->wbuf_sem); ---- a/include/linux/mtd/spi-nor.h -+++ b/include/linux/mtd/spi-nor.h -@@ -85,6 +85,7 @@ - #define SR_BP0 BIT(2) /* Block protect 0 */ - #define SR_BP1 BIT(3) /* Block protect 1 */ - #define SR_BP2 BIT(4) /* Block protect 2 */ -+#define SR_TB BIT(5) /* Top/Bottom protect */ - #define SR_SRWD BIT(7) /* SR write protect */ - - #define SR_QUAD_EN_MX BIT(6) /* Macronix Quad I/O */ -@@ -116,6 +117,7 @@ enum spi_nor_ops { - - enum spi_nor_option_flags { - SNOR_F_USE_FSR = BIT(0), -+ SNOR_F_HAS_SR_TB = BIT(1), - }; - - /** -@@ -123,7 +125,6 @@ enum spi_nor_option_flags { - * @mtd: point to a mtd_info structure - * @lock: the lock for the read/write/erase/lock/unlock operations - * @dev: point to a spi device, or a spi nor controller device. -- * @flash_node: point to a device node describing this flash instance. - * @page_size: the page size of the SPI NOR - * @addr_width: number of address bytes - * @erase_opcode: the opcode for erasing a sector -@@ -143,7 +144,8 @@ enum spi_nor_option_flags { - * @read: [DRIVER-SPECIFIC] read data from the SPI NOR - * @write: [DRIVER-SPECIFIC] write data to the SPI NOR - * @erase: [DRIVER-SPECIFIC] erase a sector of the SPI NOR -- * at the offset @offs -+ * at the offset @offs; if not provided by the driver, -+ * spi-nor will send the erase opcode via write_reg() - * @flash_lock: [FLASH-SPECIFIC] lock a region of the SPI NOR - * @flash_unlock: [FLASH-SPECIFIC] unlock a region of the SPI NOR - * @flash_is_locked: [FLASH-SPECIFIC] check if a region of the SPI NOR is -@@ -154,7 +156,6 @@ struct spi_nor { - struct mtd_info mtd; - struct mutex lock; - struct device *dev; -- struct device_node *flash_node; - u32 page_size; - u8 addr_width; - u8 erase_opcode; -@@ -184,6 +185,17 @@ struct spi_nor { - void *priv; - }; - -+static inline void spi_nor_set_flash_node(struct spi_nor *nor, -+ struct device_node *np) -+{ -+ mtd_set_of_node(&nor->mtd, np); -+} -+ -+static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor) -+{ -+ return mtd_get_of_node(&nor->mtd); -+} -+ - /** - * spi_nor_scan() - scan the SPI NOR - * @nor: the spi_nor structure diff --git a/target/linux/oxnas/patches-4.4/0073-of-mtd-prepare-helper-reading-NAND-ECC-algo-from-DT.patch b/target/linux/oxnas/patches-4.4/0073-of-mtd-prepare-helper-reading-NAND-ECC-algo-from-DT.patch deleted file mode 100644 index aa45441afa..0000000000 --- a/target/linux/oxnas/patches-4.4/0073-of-mtd-prepare-helper-reading-NAND-ECC-algo-from-DT.patch +++ /dev/null @@ -1,91 +0,0 @@ -From 410a91f6efa1c4c3c4369d1dd2c31286749dff33 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Wed, 23 Mar 2016 11:19:01 +0100 -Subject: [PATCH 073/102] of: mtd: prepare helper reading NAND ECC algo from - DT -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -NAND subsystem is being slightly reworked to store ECC details in -separated fields. In future we'll want to add support for more DT -properties as specifying every possible setup with a single -"nand-ecc-mode" is a pretty bad idea. -To allow this let's add a helper that will support something like -"nand-ecc-algo" in future. Right now we use it for keeping backward -compatibility. - -Signed-off-by: Rafał Miłecki -Signed-off-by: Boris Brezillon ---- - drivers/of/of_mtd.c | 36 ++++++++++++++++++++++++++++++++++++ - include/linux/of_mtd.h | 6 ++++++ - 2 files changed, 42 insertions(+) - ---- a/drivers/of/of_mtd.c -+++ b/drivers/of/of_mtd.c -@@ -50,6 +50,42 @@ int of_get_nand_ecc_mode(struct device_n - EXPORT_SYMBOL_GPL(of_get_nand_ecc_mode); - - /** -+ * of_get_nand_ecc_algo - Get nand ecc algorithm for given device_node -+ * @np: Pointer to the given device_node -+ * -+ * The function gets ecc algorithm and returns its enum value, or errno in error -+ * case. -+ */ -+int of_get_nand_ecc_algo(struct device_node *np) -+{ -+ const char *pm; -+ int err; -+ -+ /* -+ * TODO: Read ECC algo OF property and map it to enum nand_ecc_algo. -+ * It's not implemented yet as currently NAND subsystem ignores -+ * algorithm explicitly set this way. Once it's handled we should -+ * document & support new property. -+ */ -+ -+ /* -+ * For backward compatibility we also read "nand-ecc-mode" checking -+ * for some obsoleted values that were specifying ECC algorithm. -+ */ -+ err = of_property_read_string(np, "nand-ecc-mode", &pm); -+ if (err < 0) -+ return err; -+ -+ if (!strcasecmp(pm, "soft")) -+ return NAND_ECC_HAMMING; -+ else if (!strcasecmp(pm, "soft_bch")) -+ return NAND_ECC_BCH; -+ -+ return -ENODEV; -+} -+EXPORT_SYMBOL_GPL(of_get_nand_ecc_algo); -+ -+/** - * of_get_nand_ecc_step_size - Get ECC step size associated to - * the required ECC strength (see below). - * @np: Pointer to the given device_node ---- a/include/linux/of_mtd.h -+++ b/include/linux/of_mtd.h -@@ -13,6 +13,7 @@ - - #include - int of_get_nand_ecc_mode(struct device_node *np); -+int of_get_nand_ecc_algo(struct device_node *np); - int of_get_nand_ecc_step_size(struct device_node *np); - int of_get_nand_ecc_strength(struct device_node *np); - int of_get_nand_bus_width(struct device_node *np); -@@ -24,6 +25,11 @@ static inline int of_get_nand_ecc_mode(s - { - return -ENOSYS; - } -+ -+static inline int of_get_nand_ecc_algo(struct device_node *np) -+{ -+ return -ENOSYS; -+} - - static inline int of_get_nand_ecc_step_size(struct device_node *np) - { diff --git a/target/linux/oxnas/patches-4.4/0074-mtd-nand-import-nand_hw_control_init.patch b/target/linux/oxnas/patches-4.4/0074-mtd-nand-import-nand_hw_control_init.patch deleted file mode 100644 index 8ff28b3bc2..0000000000 --- a/target/linux/oxnas/patches-4.4/0074-mtd-nand-import-nand_hw_control_init.patch +++ /dev/null @@ -1,175 +0,0 @@ -From d45bc58dd3bdcaabc1d7d8d9b0b8dee826635cc6 Mon Sep 17 00:00:00 2001 -From: Marc Gonzalez -Date: Wed, 27 Jul 2016 11:23:52 +0200 -Subject: [PATCH] mtd: nand: import nand_hw_control_init() - -The code to initialize a struct nand_hw_control is duplicated across -several drivers. Factorize it using an inline function. - -Signed-off-by: Marc Gonzalez -Signed-off-by: Boris Brezillon ---- - drivers/mtd/nand/bf5xx_nand.c | 3 +-- - drivers/mtd/nand/brcmnand/brcmnand.c | 3 +-- - drivers/mtd/nand/docg4.c | 3 +-- - drivers/mtd/nand/fsl_elbc_nand.c | 3 +-- - drivers/mtd/nand/fsl_ifc_nand.c | 3 +-- - drivers/mtd/nand/jz4780_nand.c | 3 +-- - drivers/mtd/nand/nand_base.c | 3 +-- - drivers/mtd/nand/ndfc.c | 3 +-- - drivers/mtd/nand/pxa3xx_nand.c | 3 +-- - drivers/mtd/nand/qcom_nandc.c | 3 +-- - drivers/mtd/nand/s3c2410.c | 3 +-- - drivers/mtd/nand/sunxi_nand.c | 3 +-- - drivers/mtd/nand/txx9ndfmc.c | 3 +-- - include/linux/mtd/nand.h | 7 +++++++ - 14 files changed, 20 insertions(+), 26 deletions(-) - ---- a/drivers/mtd/nand/bf5xx_nand.c -+++ b/drivers/mtd/nand/bf5xx_nand.c -@@ -748,8 +748,7 @@ static int bf5xx_nand_probe(struct platf - - platform_set_drvdata(pdev, info); - -- spin_lock_init(&info->controller.lock); -- init_waitqueue_head(&info->controller.wq); -+ nand_hw_control_init(&info->controller); - - info->device = &pdev->dev; - info->platform = plat; ---- a/drivers/mtd/nand/brcmnand/brcmnand.c -+++ b/drivers/mtd/nand/brcmnand/brcmnand.c -@@ -2149,8 +2149,7 @@ int brcmnand_probe(struct platform_devic - - init_completion(&ctrl->done); - init_completion(&ctrl->dma_done); -- spin_lock_init(&ctrl->controller.lock); -- init_waitqueue_head(&ctrl->controller.wq); -+ nand_hw_control_init(&ctrl->controller); - INIT_LIST_HEAD(&ctrl->host_list); - - /* NAND register range */ ---- a/drivers/mtd/nand/docg4.c -+++ b/drivers/mtd/nand/docg4.c -@@ -1227,8 +1227,7 @@ static void __init init_mtd_structs(stru - nand->options = NAND_BUSWIDTH_16 | NAND_NO_SUBPAGE_WRITE; - nand->IO_ADDR_R = nand->IO_ADDR_W = doc->virtadr + DOC_IOSPACE_DATA; - nand->controller = &nand->hwcontrol; -- spin_lock_init(&nand->controller->lock); -- init_waitqueue_head(&nand->controller->wq); -+ nand_hw_control_init(nand->controller); - - /* methods */ - nand->cmdfunc = docg4_command; ---- a/drivers/mtd/nand/fsl_elbc_nand.c -+++ b/drivers/mtd/nand/fsl_elbc_nand.c -@@ -866,8 +866,7 @@ static int fsl_elbc_nand_probe(struct pl - } - elbc_fcm_ctrl->counter++; - -- spin_lock_init(&elbc_fcm_ctrl->controller.lock); -- init_waitqueue_head(&elbc_fcm_ctrl->controller.wq); -+ nand_hw_control_init(&elbc_fcm_ctrl->controller); - fsl_lbc_ctrl_dev->nand = elbc_fcm_ctrl; - } else { - elbc_fcm_ctrl = fsl_lbc_ctrl_dev->nand; ---- a/drivers/mtd/nand/fsl_ifc_nand.c -+++ b/drivers/mtd/nand/fsl_ifc_nand.c -@@ -1073,8 +1073,7 @@ static int fsl_ifc_nand_probe(struct pla - ifc_nand_ctrl->addr = NULL; - fsl_ifc_ctrl_dev->nand = ifc_nand_ctrl; - -- spin_lock_init(&ifc_nand_ctrl->controller.lock); -- init_waitqueue_head(&ifc_nand_ctrl->controller.wq); -+ nand_hw_control_init(&ifc_nand_ctrl->controller); - } else { - ifc_nand_ctrl = fsl_ifc_ctrl_dev->nand; - } ---- a/drivers/mtd/nand/nand_base.c -+++ b/drivers/mtd/nand/nand_base.c -@@ -3208,8 +3208,7 @@ static void nand_set_defaults(struct nan - - if (!chip->controller) { - chip->controller = &chip->hwcontrol; -- spin_lock_init(&chip->controller->lock); -- init_waitqueue_head(&chip->controller->wq); -+ nand_hw_control_init(chip->controller); - } - - } ---- a/drivers/mtd/nand/ndfc.c -+++ b/drivers/mtd/nand/ndfc.c -@@ -220,8 +220,7 @@ static int ndfc_probe(struct platform_de - ndfc = &ndfc_ctrl[cs]; - ndfc->chip_select = cs; - -- spin_lock_init(&ndfc->ndfc_control.lock); -- init_waitqueue_head(&ndfc->ndfc_control.wq); -+ nand_hw_control_init(&ndfc->ndfc_control); - ndfc->ofdev = ofdev; - dev_set_drvdata(&ofdev->dev, ndfc); - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -1739,8 +1739,7 @@ static int alloc_nand_resource(struct pl - chip->cmdfunc = nand_cmdfunc; - } - -- spin_lock_init(&chip->controller->lock); -- init_waitqueue_head(&chip->controller->wq); -+ nand_hw_control_init(chip->controller); - info->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(info->clk)) { - dev_err(&pdev->dev, "failed to get nand clock\n"); ---- a/drivers/mtd/nand/s3c2410.c -+++ b/drivers/mtd/nand/s3c2410.c -@@ -955,8 +955,7 @@ static int s3c24xx_nand_probe(struct pla - - platform_set_drvdata(pdev, info); - -- spin_lock_init(&info->controller.lock); -- init_waitqueue_head(&info->controller.wq); -+ nand_hw_control_init(&info->controller); - - /* get the clock source and enable it */ - ---- a/drivers/mtd/nand/sunxi_nand.c -+++ b/drivers/mtd/nand/sunxi_nand.c -@@ -1432,8 +1432,7 @@ static int sunxi_nfc_probe(struct platfo - return -ENOMEM; - - nfc->dev = dev; -- spin_lock_init(&nfc->controller.lock); -- init_waitqueue_head(&nfc->controller.wq); -+ nand_hw_control_init(&nfc->controller); - INIT_LIST_HEAD(&nfc->chips); - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); ---- a/drivers/mtd/nand/txx9ndfmc.c -+++ b/drivers/mtd/nand/txx9ndfmc.c -@@ -304,8 +304,7 @@ static int __init txx9ndfmc_probe(struct - dev_info(&dev->dev, "CLK:%ldMHz HOLD:%d SPW:%d\n", - (gbusclk + 500000) / 1000000, hold, spw); - -- spin_lock_init(&drvdata->hw_control.lock); -- init_waitqueue_head(&drvdata->hw_control.wq); -+ nand_hw_control_init(&drvdata->hw_control); - - platform_set_drvdata(dev, drvdata); - txx9ndfmc_initialize(dev); ---- a/include/linux/mtd/nand.h -+++ b/include/linux/mtd/nand.h -@@ -461,6 +461,13 @@ struct nand_hw_control { - wait_queue_head_t wq; - }; - -+static inline void nand_hw_control_init(struct nand_hw_control *nfc) -+{ -+ nfc->active = NULL; -+ spin_lock_init(&nfc->lock); -+ init_waitqueue_head(&nfc->wq); -+} -+ - /** - * struct nand_ecc_ctrl - Control structure for ECC - * @mode: ECC mode diff --git a/target/linux/oxnas/patches-4.4/010-arm_introduce-dma-fiq-irq-broadcast.patch b/target/linux/oxnas/patches-4.4/010-arm_introduce-dma-fiq-irq-broadcast.patch deleted file mode 100644 index 024675e599..0000000000 --- a/target/linux/oxnas/patches-4.4/010-arm_introduce-dma-fiq-irq-broadcast.patch +++ /dev/null @@ -1,80 +0,0 @@ ---- a/arch/arm/include/asm/glue-cache.h -+++ b/arch/arm/include/asm/glue-cache.h -@@ -156,9 +156,15 @@ static inline void nop_dma_unmap_area(co - #define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range) - #define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range) - #define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range) --#define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area) - --#define dmac_flush_range __glue(_CACHE,_dma_flush_range) -+#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST -+# define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area) -+# define dmac_flush_range __glue(_CACHE,_dma_flush_range) -+#else -+# define __cpuc_flush_dcache_area __glue(fiq,_flush_kern_dcache_area) -+# define dmac_flush_range __glue(fiq,_dma_flush_range) -+#endif -+ - #endif - - #endif ---- a/arch/arm/mm/Kconfig -+++ b/arch/arm/mm/Kconfig -@@ -866,6 +866,17 @@ config DMA_CACHE_RWFO - in hardware, other workarounds are needed (e.g. cache - maintenance broadcasting in software via FIQ). - -+config DMA_CACHE_FIQ_BROADCAST -+ bool "Enable fiq broadcast DMA cache maintenance" -+ depends on CPU_V6K && SMP -+ select FIQ -+ help -+ The Snoop Control Unit on ARM11MPCore does not detect the -+ cache maintenance operations and the dma_{map,unmap}_area() -+ functions may leave stale cache entries on other CPUs. By -+ enabling this option, fiq broadcast in the ARMv6 -+ DMA cache maintenance functions is performed. -+ - config OUTER_CACHE - bool - ---- a/arch/arm/mm/flush.c -+++ b/arch/arm/mm/flush.c -@@ -319,6 +319,7 @@ void __sync_icache_dcache(pte_t pteval) - void flush_dcache_page(struct page *page) - { - struct address_space *mapping; -+ bool skip_broadcast = true; - - /* - * The zero page is never written to, so never has any dirty -@@ -329,7 +330,10 @@ void flush_dcache_page(struct page *page - - mapping = page_mapping(page); - -- if (!cache_ops_need_broadcast() && -+#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST -+ skip_broadcast = !cache_ops_need_broadcast(); -+#endif -+ if (skip_broadcast && - mapping && !page_mapped(page)) - clear_bit(PG_dcache_clean, &page->flags); - else { ---- a/arch/arm/mm/dma.h -+++ b/arch/arm/mm/dma.h -@@ -4,8 +4,13 @@ - #include - - #ifndef MULTI_CACHE --#define dmac_map_area __glue(_CACHE,_dma_map_area) --#define dmac_unmap_area __glue(_CACHE,_dma_unmap_area) -+#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST -+# define dmac_map_area __glue(_CACHE,_dma_map_area) -+# define dmac_unmap_area __glue(_CACHE,_dma_unmap_area) -+#else -+# define dmac_map_area __glue(fiq,_dma_map_area) -+# define dmac_unmap_area __glue(fiq,_dma_unmap_area) -+#endif - - /* - * These are private to the dma-mapping API. Do not use directly. diff --git a/target/linux/oxnas/patches-4.4/250-add-plxtech-vendor-prefix.patch b/target/linux/oxnas/patches-4.4/250-add-plxtech-vendor-prefix.patch deleted file mode 100644 index a94ac2277b..0000000000 --- a/target/linux/oxnas/patches-4.4/250-add-plxtech-vendor-prefix.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/Documentation/devicetree/bindings/vendor-prefixes.txt -+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt -@@ -175,6 +175,7 @@ picochip Picochip Ltd - plathome Plat'Home Co., Ltd. - plda PLDA - pixcir PIXCIR MICROELECTRONICS Co., Ltd -+plxtech PLX Technology, Inc. - pulsedlight PulsedLight, Inc - powervr PowerVR (deprecated, use img) - qca Qualcomm Atheros, Inc. diff --git a/target/linux/oxnas/patches-4.4/300-introduce-oxnas-platform.patch b/target/linux/oxnas/patches-4.4/300-introduce-oxnas-platform.patch deleted file mode 100644 index a88d5d94b5..0000000000 --- a/target/linux/oxnas/patches-4.4/300-introduce-oxnas-platform.patch +++ /dev/null @@ -1,71 +0,0 @@ ---- a/arch/arm/Kconfig -+++ b/arch/arm/Kconfig -@@ -603,6 +603,19 @@ config ARCH_LPC32XX - help - Support for the NXP LPC32XX family of processors - -+config ARCH_OXNAS -+ bool "Oxford Semiconductor 815/820/825 NAS SoC" -+ select ARM_GIC -+ select ARCH_REQUIRE_GPIOLIB -+ select CLKDEV_LOOKUP -+ select GENERIC_CLOCKEVENTS -+ select COMMON_CLK -+ select MIGHT_HAVE_PCI -+ select ARCH_HAS_RESET_CONTROLLER -+ help -+ This enables support for Oxford 815/820/825 NAS SoC -+ later renamed to PLXTECH NAS782x. -+ - config ARCH_PXA - bool "PXA2xx/PXA3xx-based" - depends on MMU -@@ -883,6 +896,8 @@ source "arch/arm/mach-omap2/Kconfig" - - source "arch/arm/mach-orion5x/Kconfig" - -+source "arch/arm/mach-oxnas/Kconfig" -+ - source "arch/arm/mach-picoxcell/Kconfig" - - source "arch/arm/mach-pxa/Kconfig" ---- a/arch/arm/Makefile -+++ b/arch/arm/Makefile -@@ -200,6 +200,7 @@ machine-$(CONFIG_ARCH_NSPIRE) += nspire - machine-$(CONFIG_ARCH_OMAP1) += omap1 - machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2 - machine-$(CONFIG_ARCH_ORION5X) += orion5x -+machine-$(CONFIG_ARCH_OXNAS) += oxnas - machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell - machine-$(CONFIG_ARCH_PXA) += pxa - machine-$(CONFIG_ARCH_QCOM) += qcom ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -497,6 +497,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \ - orion5x-lswsgl.dtb \ - orion5x-maxtor-shared-storage-2.dtb \ - orion5x-rd88f5182-nas.dtb -+dtb-$(CONFIG_ARCH_OXNAS) += ox820-pogoplug-pro.dtb - dtb-$(CONFIG_ARCH_PRIMA2) += \ - prima2-evb.dtb - dtb-$(CONFIG_ARCH_QCOM) += \ ---- a/arch/arm/tools/mach-types -+++ b/arch/arm/tools/mach-types -@@ -228,6 +228,7 @@ edb9302a MACH_EDB9302A EDB9302A 1127 - edb9307a MACH_EDB9307A EDB9307A 1128 - omap_3430sdp MACH_OMAP_3430SDP OMAP_3430SDP 1138 - vstms MACH_VSTMS VSTMS 1140 -+ox820 MACH_OX820 OX820 1152 - micro9m MACH_MICRO9M MICRO9M 1169 - bug MACH_BUG BUG 1179 - at91sam9263ek MACH_AT91SAM9263EK AT91SAM9263EK 1202 ---- a/drivers/clk/Makefile -+++ b/drivers/clk/Makefile -@@ -32,6 +32,7 @@ obj-$(CONFIG_ARCH_MB86S7X) += clk-mb86s - obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o - obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o - obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o -+obj-$(CONFIG_ARCH_OXNAS) += clk-oxnas.o - obj-$(CONFIG_COMMON_CLK_PALMAS) += clk-palmas.o - obj-$(CONFIG_CLK_QORIQ) += clk-qoriq.o - obj-$(CONFIG_COMMON_CLK_RK808) += clk-rk808.o diff --git a/target/linux/oxnas/patches-4.4/310-oxnas-clocksource.patch b/target/linux/oxnas/patches-4.4/310-oxnas-clocksource.patch deleted file mode 100644 index efb058dbb4..0000000000 --- a/target/linux/oxnas/patches-4.4/310-oxnas-clocksource.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/clocksource/Kconfig -+++ b/drivers/clocksource/Kconfig -@@ -222,6 +222,12 @@ config VF_PIT_TIMER - help - Support for Period Interrupt Timer on Freescale Vybrid Family SoCs. - -+config CLKSRC_RPS_TIMER -+ def_bool y if ARCH_OXNAS -+ select CLKSRC_MMIO -+ help -+ This option enables support for the oxnas rps timers. -+ - config SYS_SUPPORTS_SH_CMT - bool - ---- a/drivers/clocksource/Makefile -+++ b/drivers/clocksource/Makefile -@@ -41,6 +41,7 @@ obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exyno - obj-$(CONFIG_CLKSRC_LPC32XX) += time-lpc32xx.o - obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o - obj-$(CONFIG_FSL_FTM_TIMER) += fsl_ftm_timer.o -+obj-$(CONFIG_CLKSRC_RPS_TIMER) += oxnas_rps_timer.o - obj-$(CONFIG_VF_PIT_TIMER) += vf_pit_timer.o - obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o - obj-$(CONFIG_MTK_TIMER) += mtk_timer.o diff --git a/target/linux/oxnas/patches-4.4/320-oxnas-irqchip.patch b/target/linux/oxnas/patches-4.4/320-oxnas-irqchip.patch deleted file mode 100644 index 37918d680b..0000000000 --- a/target/linux/oxnas/patches-4.4/320-oxnas-irqchip.patch +++ /dev/null @@ -1,34 +0,0 @@ ---- a/drivers/irqchip/Kconfig -+++ b/drivers/irqchip/Kconfig -@@ -27,6 +27,11 @@ config ARM_GIC_V3_ITS - bool - select PCI_MSI_IRQ_DOMAIN - -+config PLXTECH_RPS -+ def_bool y if ARHC_OXNAS -+ depends on ARCH_OXNAS -+ select IRQ_DOMAIN -+ - config ARM_NVIC - bool - select IRQ_DOMAIN ---- a/drivers/irqchip/Makefile -+++ b/drivers/irqchip/Makefile -@@ -34,6 +34,7 @@ obj-$(CONFIG_IRQ_MIPS_CPU) += irq-mips- - obj-$(CONFIG_SIRF_IRQ) += irq-sirfsoc.o - obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o - obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o -+obj-$(CONFIG_PLXTECH_RPS) += irq-rps.o - obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o - obj-$(CONFIG_ARCH_NSPIRE) += irq-zevio.o - obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o ---- a/drivers/irqchip/irq-gic.c -+++ b/drivers/irqchip/irq-gic.c -@@ -1253,6 +1253,7 @@ IRQCHIP_DECLARE(arm1176jzf_dc_gic, "arm, - IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init); - IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init); - IRQCHIP_DECLARE(cortex_a7_gic, "arm,cortex-a7-gic", gic_of_init); -+IRQCHIP_DECLARE(arm11_mpcore_gic, "arm,arm11mp-gic", gic_of_init); - IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init); - IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init); - IRQCHIP_DECLARE(pl390, "arm,pl390", gic_of_init); diff --git a/target/linux/oxnas/patches-4.4/330-oxnas-pinctrl.patch b/target/linux/oxnas/patches-4.4/330-oxnas-pinctrl.patch deleted file mode 100644 index 76a19267a2..0000000000 --- a/target/linux/oxnas/patches-4.4/330-oxnas-pinctrl.patch +++ /dev/null @@ -1,28 +0,0 @@ ---- a/drivers/pinctrl/Kconfig -+++ b/drivers/pinctrl/Kconfig -@@ -228,6 +228,15 @@ config PINCTRL_COH901 - COH 901 335 and COH 901 571/3. They contain 3, 5 or 7 - ports of 8 GPIO pins each. - -+config PINCTRL_OXNAS -+ bool "OXNAS pinctrl driver" -+ depends on OF -+ depends on ARCH_OXNAS -+ select PINMUX -+ select PINCONF -+ help -+ Say Y here to enable the oxnas pinctrl driver -+ - config PINCTRL_PALMAS - bool "Pinctrl driver for the PALMAS Series MFD devices" - depends on OF && MFD_PALMAS ---- a/drivers/pinctrl/Makefile -+++ b/drivers/pinctrl/Makefile -@@ -17,6 +17,7 @@ obj-$(CONFIG_PINCTRL_AMD) += pinctrl-amd - obj-$(CONFIG_PINCTRL_DIGICOLOR) += pinctrl-digicolor.o - obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o - obj-$(CONFIG_PINCTRL_MESON) += meson/ -+obj-$(CONFIG_PINCTRL_OXNAS) += pinctrl-oxnas.o - obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o - obj-$(CONFIG_PINCTRL_PISTACHIO) += pinctrl-pistachio.o - obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o diff --git a/target/linux/oxnas/patches-4.4/340-oxnas-pcie.patch b/target/linux/oxnas/patches-4.4/340-oxnas-pcie.patch deleted file mode 100644 index edc23b70a1..0000000000 --- a/target/linux/oxnas/patches-4.4/340-oxnas-pcie.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/drivers/pci/host/Kconfig -+++ b/drivers/pci/host/Kconfig -@@ -173,4 +173,9 @@ config PCI_HISI - help - Say Y here if you want PCIe controller support on HiSilicon HIP05 SoC - -+config PCI_OXNAS -+ bool "PLX Oxnas PCIe controller" -+ depends on ARCH_OXNAS -+ select PCIEPORTBUS -+ - endmenu ---- a/drivers/pci/host/Makefile -+++ b/drivers/pci/host/Makefile -@@ -3,6 +3,7 @@ obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o - obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o - obj-$(CONFIG_PCI_IMX6) += pci-imx6.o - obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o -+obj-$(CONFIG_PCI_OXNAS) += pcie-oxnas.o - obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o - obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o - obj-$(CONFIG_PCI_RCAR_GEN2_PCIE) += pcie-rcar.o diff --git a/target/linux/oxnas/patches-4.4/350-oxnas-reset.patch b/target/linux/oxnas/patches-4.4/350-oxnas-reset.patch deleted file mode 100644 index e9aaf4b430..0000000000 --- a/target/linux/oxnas/patches-4.4/350-oxnas-reset.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/drivers/reset/Kconfig -+++ b/drivers/reset/Kconfig -@@ -12,4 +12,9 @@ menuconfig RESET_CONTROLLER - - If unsure, say no. - -+config RESET_CONTROLLER_OXNAS -+ bool -+ select RESET_CONTROLLER -+ - source "drivers/reset/sti/Kconfig" -+ ---- a/drivers/reset/Makefile -+++ b/drivers/reset/Makefile -@@ -1,4 +1,5 @@ - obj-$(CONFIG_RESET_CONTROLLER) += core.o -+obj-$(CONFIG_RESET_CONTROLLER_OXNAS) += reset-ox820.o - obj-$(CONFIG_ARCH_LPC18XX) += reset-lpc18xx.o - obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o - obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o diff --git a/target/linux/oxnas/patches-4.4/400-oxnas-nand.patch b/target/linux/oxnas/patches-4.4/400-oxnas-nand.patch deleted file mode 100644 index fbc3edbbe8..0000000000 --- a/target/linux/oxnas/patches-4.4/400-oxnas-nand.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -563,4 +563,11 @@ config MTD_NAND_QCOM - Enables support for NAND flash chips on SoCs containing the EBI2 NAND - controller. This controller is found on IPQ806x SoC. - -+config MTD_NAND_OXNAS -+ tristate "Support for NAND on Plxtech NAS782X SoC" -+ depends on ARCH_OXNAS -+ help -+ Enables support for NAND Flash chips on Plxtech NAS782X SoCs. NAND is attached -+ to the STATIC Unit. -+ - endif # MTD_NAND ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -46,6 +46,7 @@ obj-$(CONFIG_MTD_NAND_SOCRATES) += socr - obj-$(CONFIG_MTD_NAND_TXX9NDFMC) += txx9ndfmc.o - obj-$(CONFIG_MTD_NAND_NUC900) += nuc900_nand.o - obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o -+obj-$(CONFIG_MTD_NAND_OXNAS) += oxnas_nand.o - obj-$(CONFIG_MTD_NAND_VF610_NFC) += vf610_nfc.o - obj-$(CONFIG_MTD_NAND_RICOH) += r852.o - obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o diff --git a/target/linux/oxnas/patches-4.4/500-oxnas-sata.patch b/target/linux/oxnas/patches-4.4/500-oxnas-sata.patch deleted file mode 100644 index b833b635aa..0000000000 --- a/target/linux/oxnas/patches-4.4/500-oxnas-sata.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/ata/Kconfig -+++ b/drivers/ata/Kconfig -@@ -432,6 +432,13 @@ config SATA_VITESSE - - If unsure, say N. - -+config SATA_OXNAS -+ tristate "PLXTECH NAS782X SATA support" -+ help -+ This option enables support for Nas782x Serial ATA controller. -+ -+ If unsure, say N. -+ - comment "PATA SFF controllers with BMDMA" - - config PATA_ALI ---- a/drivers/ata/Makefile -+++ b/drivers/ata/Makefile -@@ -40,6 +40,7 @@ obj-$(CONFIG_SATA_SVW) += sata_svw.o - obj-$(CONFIG_SATA_ULI) += sata_uli.o - obj-$(CONFIG_SATA_VIA) += sata_via.o - obj-$(CONFIG_SATA_VITESSE) += sata_vsc.o -+obj-$(CONFIG_SATA_OXNAS) += sata_oxnas.o - - # SFF PATA w/ BMDMA - obj-$(CONFIG_PATA_ALI) += pata_ali.o diff --git a/target/linux/oxnas/patches-4.4/700-oxnas-dwmac.patch b/target/linux/oxnas/patches-4.4/700-oxnas-dwmac.patch deleted file mode 100644 index 5de25d2e82..0000000000 --- a/target/linux/oxnas/patches-4.4/700-oxnas-dwmac.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/drivers/net/ethernet/stmicro/stmmac/Kconfig -+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig -@@ -69,6 +69,16 @@ config DWMAC_MESON - the stmmac device driver. This driver is used for Meson6 and - Meson8 SoCs. - -+config DWMAC_OXNAS -+ tristate "Oxnas gmac support" -+ default ARCH_OXNAS -+ depends on OF && ARCH_OXNAS -+ help -+ Support for Ethernet controller on Oxnas SoCs. -+ -+ This selects the Oxford OX82x SoC glue layer support for -+ the stmmac device driver. -+ - config DWMAC_ROCKCHIP - tristate "Rockchip dwmac support" - default ARCH_ROCKCHIP ---- a/drivers/net/ethernet/stmicro/stmmac/Makefile -+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile -@@ -9,6 +9,7 @@ obj-$(CONFIG_STMMAC_PLATFORM) += stmmac- - obj-$(CONFIG_DWMAC_IPQ806X) += dwmac-ipq806x.o - obj-$(CONFIG_DWMAC_LPC18XX) += dwmac-lpc18xx.o - obj-$(CONFIG_DWMAC_MESON) += dwmac-meson.o -+obj-$(CONFIG_DWMAC_OXNAS) += dwmac-oxnas.o - obj-$(CONFIG_DWMAC_ROCKCHIP) += dwmac-rk.o - obj-$(CONFIG_DWMAC_SOCFPGA) += dwmac-socfpga.o - obj-$(CONFIG_DWMAC_STI) += dwmac-sti.o diff --git a/target/linux/oxnas/patches-4.4/800-oxnas-ehci.patch b/target/linux/oxnas/patches-4.4/800-oxnas-ehci.patch deleted file mode 100644 index 7f26de6b14..0000000000 --- a/target/linux/oxnas/patches-4.4/800-oxnas-ehci.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -315,6 +315,13 @@ config USB_OCTEON_EHCI - USB 2.0 device support. All CN6XXX based chips with USB are - supported. - -+config USB_EHCI_OXNAS -+ tristate "OXNAS EHCI Module" -+ depends on USB_EHCI_HCD && ARCH_OXNAS -+ select USB_EHCI_ROOT_HUB_TT -+ ---help--- -+ Enable support for the OX820 SOC's on-chip EHCI controller. -+ - endif # USB_EHCI_HCD - - config USB_OXU210HP_HCD ---- a/drivers/usb/host/Makefile -+++ b/drivers/usb/host/Makefile -@@ -41,6 +41,7 @@ obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci- - obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o - obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o - obj-$(CONFIG_USB_W90X900_EHCI) += ehci-w90x900.o -+obj-$(CONFIG_USB_EHCI_OXNAS) += ehci-oxnas.o - - obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o - obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o diff --git a/target/linux/oxnas/patches-4.4/900-more-boards.patch b/target/linux/oxnas/patches-4.4/900-more-boards.patch deleted file mode 100644 index f41fa8648e..0000000000 --- a/target/linux/oxnas/patches-4.4/900-more-boards.patch +++ /dev/null @@ -1,15 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -497,7 +497,11 @@ dtb-$(CONFIG_ARCH_ORION5X) += \ - orion5x-lswsgl.dtb \ - orion5x-maxtor-shared-storage-2.dtb \ - orion5x-rd88f5182-nas.dtb --dtb-$(CONFIG_ARCH_OXNAS) += ox820-pogoplug-pro.dtb -+dtb-$(CONFIG_ARCH_OXNAS) += ox820-akitio.dtb \ -+ ox820-pogoplug-pro.dtb \ -+ ox820-pogoplug-v3.dtb \ -+ ox820-stg212.dtb \ -+ ox820-kd20.dtb - dtb-$(CONFIG_ARCH_PRIMA2) += \ - prima2-evb.dtb - dtb-$(CONFIG_ARCH_QCOM) += \ -- 2.30.2