From 6f923a0134d9868a71db19cca1fae551a27b46f5 Mon Sep 17 00:00:00 2001 From: Konstantin Shkolnyy Date: Tue, 24 Nov 2015 16:28:41 -0600 Subject: [PATCH] USB: cp210x: add tx_empty() Added tx_empty callback needed for generic wait-until-sent support. Without this function, when the port is closed usbserial can't know that there are still data in the chip's transmit FIFO. The chip gets disabled and untransmitted data lost. When the actual byte count is reported by tx-empty the close can be delayed until all data are sent. Signed-off-by: Konstantin Shkolnyy [johan: modify tx_empty error handling ] Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 58 +++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 9e5d5b016633..084033a568c2 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -38,6 +38,7 @@ static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *, struct ktermios *); static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *, struct ktermios*); +static bool cp210x_tx_empty(struct usb_serial_port *port); static int cp210x_tiocmget(struct tty_struct *); static int cp210x_tiocmset(struct tty_struct *, unsigned int, unsigned int); static int cp210x_tiocmset_port(struct usb_serial_port *port, @@ -215,6 +216,7 @@ static struct usb_serial_driver cp210x_device = { .close = cp210x_close, .break_ctl = cp210x_break_ctl, .set_termios = cp210x_set_termios, + .tx_empty = cp210x_tx_empty, .tiocmget = cp210x_tiocmget, .tiocmset = cp210x_tiocmset, .port_probe = cp210x_port_probe, @@ -301,6 +303,17 @@ static struct usb_serial_driver * const serial_drivers[] = { #define CONTROL_WRITE_DTR 0x0100 #define CONTROL_WRITE_RTS 0x0200 +/* CP210X_GET_COMM_STATUS returns these 0x13 bytes */ +struct cp210x_comm_status { + __le32 ulErrors; + __le32 ulHoldReasons; + __le32 ulAmountInInQueue; + __le32 ulAmountInOutQueue; + u8 bEofReceived; + u8 bWaitForImmediate; + u8 bReserved; +} __packed; + /* * CP210X_PURGE - 16 bits passed in wValue of USB request. * SiLabs app note AN571 gives a strange description of the 4 bits: @@ -549,6 +562,51 @@ static void cp210x_close(struct usb_serial_port *port) cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE); } +/* + * Read how many bytes are waiting in the TX queue. + */ +static int cp210x_get_tx_queue_byte_count(struct usb_serial_port *port, + u32 *count) +{ + struct usb_serial *serial = port->serial; + struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); + struct cp210x_comm_status *sts; + int result; + + sts = kmalloc(sizeof(*sts), GFP_KERNEL); + if (!sts) + return -ENOMEM; + + result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + CP210X_GET_COMM_STATUS, REQTYPE_INTERFACE_TO_HOST, + 0, port_priv->bInterfaceNumber, sts, sizeof(*sts), + USB_CTRL_GET_TIMEOUT); + if (result == sizeof(*sts)) { + *count = le32_to_cpu(sts->ulAmountInOutQueue); + result = 0; + } else { + dev_err(&port->dev, "failed to get comm status: %d\n", result); + if (result >= 0) + result = -EPROTO; + } + + kfree(sts); + + return result; +} + +static bool cp210x_tx_empty(struct usb_serial_port *port) +{ + int err; + u32 count; + + err = cp210x_get_tx_queue_byte_count(port, &count); + if (err) + return true; + + return !count; +} + /* * cp210x_get_termios * Reads the baud rate, data bits, parity, stop bits and flow control mode -- 2.30.2