From 70bcc658c0b13d9e89033e1981daf0f431f39522 Mon Sep 17 00:00:00 2001 From: Lior David Date: Sun, 21 Jan 2018 11:14:41 +0200 Subject: [PATCH] wil6210: fix random failure to bring network interface up Currently when we want to bring the interface up, we first reset the device which causes the boot loader to run. Then we halt the device CPU, load FW image and resume the device CPU. There are some boot loader versions which perform redundant memory accesses even when idle. Halting the device CPU while boot loader access memory can cause the device memory controller to get stuck, the FW will fail to load and the network interface will not come up. For such boot loaders implement a workaround where we freeze the boot loader before halting the device CPU, so it will not perform any memory accesses. Signed-off-by: Lior David Signed-off-by: Maya Erez Signed-off-by: Kalle Valo --- .../net/wireless/ath/wil6210/boot_loader.h | 9 +- drivers/net/wireless/ath/wil6210/main.c | 102 +++++++++++++++++- drivers/net/wireless/ath/wil6210/pcie_bus.c | 8 ++ drivers/net/wireless/ath/wil6210/wil6210.h | 3 + drivers/net/wireless/ath/wil6210/wmi.c | 18 ++++ 5 files changed, 138 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/wil6210/boot_loader.h b/drivers/net/wireless/ath/wil6210/boot_loader.h index c131b5e1292f..d32c1f4e533a 100644 --- a/drivers/net/wireless/ath/wil6210/boot_loader.h +++ b/drivers/net/wireless/ath/wil6210/boot_loader.h @@ -1,4 +1,5 @@ /* Copyright (c) 2015 Qualcomm Atheros, Inc. + * Copyright (c) 2018, The Linux Foundation. All rights reserved. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -39,7 +40,8 @@ struct bl_dedicated_registers_v1 { /* valid only for version 2 and above */ __le32 bl_assert_code; /* 0x880A58 BL Assert code */ __le32 bl_assert_blink; /* 0x880A5C BL Assert Branch */ - __le32 bl_reserved[22]; /* 0x880A60 - 0x880AB4 */ + __le32 bl_shutdown_handshake; /* 0x880A60 BL cleaner shutdown */ + __le32 bl_reserved[21]; /* 0x880A64 - 0x880AB4 */ __le32 bl_magic_number; /* 0x880AB8 BL Magic number */ } __packed; @@ -58,4 +60,9 @@ struct bl_dedicated_registers_v0 { u8 mac_address[6]; /* 0x880A4c BL mac address */ } __packed; +/* bits for bl_shutdown_handshake */ +#define BL_SHUTDOWN_HS_GRTD BIT(0) +#define BL_SHUTDOWN_HS_RTD BIT(1) +#define BL_SHUTDOWN_HS_PROT_VER(x) WIL_GET_BITS(x, 28, 31) + #endif /* BOOT_LOADER_EXPORT_H_ */ diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index d95ff742e386..575aafe149a6 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -638,6 +638,98 @@ void wil_priv_deinit(struct wil6210_priv *wil) destroy_workqueue(wil->wmi_wq); } +static void wil_shutdown_bl(struct wil6210_priv *wil) +{ + u32 val; + + wil_s(wil, RGF_USER_BL + + offsetof(struct bl_dedicated_registers_v1, + bl_shutdown_handshake), BL_SHUTDOWN_HS_GRTD); + + usleep_range(100, 150); + + val = wil_r(wil, RGF_USER_BL + + offsetof(struct bl_dedicated_registers_v1, + bl_shutdown_handshake)); + if (val & BL_SHUTDOWN_HS_RTD) { + wil_dbg_misc(wil, "BL is ready for halt\n"); + return; + } + + wil_err(wil, "BL did not report ready for halt\n"); +} + +/* this format is used by ARC embedded CPU for instruction memory */ +static inline u32 ARC_me_imm32(u32 d) +{ + return ((d & 0xffff0000) >> 16) | ((d & 0x0000ffff) << 16); +} + +/* defines access to interrupt vectors for wil_freeze_bl */ +#define ARC_IRQ_VECTOR_OFFSET(N) ((N) * 8) +/* ARC long jump instruction */ +#define ARC_JAL_INST (0x20200f80) + +static void wil_freeze_bl(struct wil6210_priv *wil) +{ + u32 jal, upc, saved; + u32 ivt3 = ARC_IRQ_VECTOR_OFFSET(3); + + jal = wil_r(wil, wil->iccm_base + ivt3); + if (jal != ARC_me_imm32(ARC_JAL_INST)) { + wil_dbg_misc(wil, "invalid IVT entry found, skipping\n"); + return; + } + + /* prevent the target from entering deep sleep + * and disabling memory access + */ + saved = wil_r(wil, RGF_USER_USAGE_8); + wil_w(wil, RGF_USER_USAGE_8, saved | BIT_USER_PREVENT_DEEP_SLEEP); + usleep_range(20, 25); /* let the BL process the bit */ + + /* redirect to endless loop in the INT_L1 context and let it trap */ + wil_w(wil, wil->iccm_base + ivt3 + 4, ARC_me_imm32(ivt3)); + usleep_range(20, 25); /* let the BL get into the trap */ + + /* verify the BL is frozen */ + upc = wil_r(wil, RGF_USER_CPU_PC); + if (upc < ivt3 || (upc > (ivt3 + 8))) + wil_dbg_misc(wil, "BL freeze failed, PC=0x%08X\n", upc); + + wil_w(wil, RGF_USER_USAGE_8, saved); +} + +static void wil_bl_prepare_halt(struct wil6210_priv *wil) +{ + u32 tmp, ver; + + /* before halting device CPU driver must make sure BL is not accessing + * host memory. This is done differently depending on BL version: + * 1. For very old BL versions the procedure is skipped + * (not supported). + * 2. For old BL version we use a special trick to freeze the BL + * 3. For new BL versions we shutdown the BL using handshake procedure. + */ + tmp = wil_r(wil, RGF_USER_BL + + offsetof(struct bl_dedicated_registers_v0, + boot_loader_struct_version)); + if (!tmp) { + wil_dbg_misc(wil, "old BL, skipping halt preperation\n"); + return; + } + + tmp = wil_r(wil, RGF_USER_BL + + offsetof(struct bl_dedicated_registers_v1, + bl_shutdown_handshake)); + ver = BL_SHUTDOWN_HS_PROT_VER(tmp); + + if (ver > 0) + wil_shutdown_bl(wil); + else + wil_freeze_bl(wil); +} + static inline void wil_halt_cpu(struct wil6210_priv *wil) { wil_w(wil, RGF_USER_USER_CPU_0, BIT_USER_USER_CPU_MAN_RST); @@ -685,11 +777,16 @@ static int wil_target_reset(struct wil6210_priv *wil, int no_flash) wil_halt_cpu(wil); - if (!no_flash) + if (!no_flash) { /* clear all boot loader "ready" bits */ wil_w(wil, RGF_USER_BL + offsetof(struct bl_dedicated_registers_v0, boot_loader_ready), 0); + /* this should be safe to write even with old BLs */ + wil_w(wil, RGF_USER_BL + + offsetof(struct bl_dedicated_registers_v1, + bl_shutdown_handshake), 0); + } /* Clear Fw Download notification */ wil_c(wil, RGF_USER_USAGE_6, BIT(0)); @@ -1156,6 +1253,9 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw) wil_info(wil, "Use firmware <%s> + board <%s>\n", wil->wil_fw_name, WIL_BOARD_FILE_NAME); + if (!no_flash) + wil_bl_prepare_halt(wil); + wil_halt_cpu(wil); memset(wil->fw_version, 0, sizeof(wil->fw_version)); /* Loading f/w from the file */ diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c index ab8cb91b7984..750c34edd3f5 100644 --- a/drivers/net/wireless/ath/wil6210/pcie_bus.c +++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c @@ -43,6 +43,7 @@ int wil_set_capabilities(struct wil6210_priv *wil) u8 chip_revision = (wil_r(wil, RGF_USER_REVISION_ID) & RGF_USER_REVISION_ID_MASK); int platform_capa; + struct fw_map *iccm_section; bitmap_zero(wil->hw_capa, hw_capa_last); bitmap_zero(wil->fw_capabilities, WMI_FW_CAPABILITY_MAX); @@ -95,6 +96,13 @@ int wil_set_capabilities(struct wil6210_priv *wil) return -EINVAL; } + iccm_section = wil_find_fw_mapping("fw_code"); + if (!iccm_section) { + wil_err(wil, "fw_code section not found in fw_mapping\n"); + return -EINVAL; + } + wil->iccm_base = iccm_section->host; + wil_info(wil, "Board hardware is %s, flash %sexist\n", wil->hw_name, test_bit(hw_capa_no_flash, wil->hw_capa) ? "doesn't " : ""); diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h index d243df395e0a..5f9bcfb9bb86 100644 --- a/drivers/net/wireless/ath/wil6210/wil6210.h +++ b/drivers/net/wireless/ath/wil6210/wil6210.h @@ -170,6 +170,7 @@ struct RGF_ICR { #define HW_MACHINE_BOOT_DONE (0x3fffffd) #define RGF_USER_USER_CPU_0 (0x8801e0) #define BIT_USER_USER_CPU_MAN_RST BIT(1) /* user_cpu_man_rst */ +#define RGF_USER_CPU_PC (0x8801e8) #define RGF_USER_MAC_CPU_0 (0x8801fc) #define BIT_USER_MAC_CPU_MAN_RST BIT(1) /* mac_cpu_man_rst */ #define RGF_USER_USER_SCRATCH_PAD (0x8802bc) @@ -791,6 +792,7 @@ struct wil6210_priv { u32 rgf_fw_assert_code_addr; u32 rgf_ucode_assert_code_addr; + u32 iccm_base; }; #define wil_to_wiphy(i) (i->wdev->wiphy) @@ -916,6 +918,7 @@ void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r); int wil_find_cid(struct wil6210_priv *wil, const u8 *mac); void wil_set_ethtoolops(struct net_device *ndev); +struct fw_map *wil_find_fw_mapping(const char *section); void __iomem *wmi_buffer_block(struct wil6210_priv *wil, __le32 ptr, u32 size); void __iomem *wmi_buffer(struct wil6210_priv *wil, __le32 ptr); void __iomem *wmi_addr(struct wil6210_priv *wil, u32 ptr); diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c index 69da3c256ad0..43c5803a35af 100644 --- a/drivers/net/wireless/ath/wil6210/wmi.c +++ b/drivers/net/wireless/ath/wil6210/wmi.c @@ -184,6 +184,24 @@ static u32 wmi_addr_remap(u32 x) return 0; } +/** + * find fw_mapping entry by section name + * @section - section name + * + * Return pointer to section or NULL if not found + */ +struct fw_map *wil_find_fw_mapping(const char *section) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(fw_mapping); i++) + if (fw_mapping[i].name && + !strcmp(section, fw_mapping[i].name)) + return &fw_mapping[i]; + + return NULL; +} + /** * Check address validity for WMI buffer; remap if needed * @ptr - internal (linker) fw/ucode address -- 2.30.2