From 7229b12f5da33d5c376ee264f063703844b8092d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 20 Feb 2018 17:33:45 +0100 Subject: [PATCH] ALSA: x86: hdmi: Add single_port option for compatible behavior The recent support for the multiple PCM devices allowed user to use multiple HDMI/DP outputs, but at the same time, the PCM stream assignment has been changed, too. Due to that, the former PCM#0 (there was only one stream in the past) is likely assigned to a different one (e.g. PCM#2), and it ends up with the regression when user sticks with the fixed configuration using the device#0. Although the multiple monitor support shouldn't matter when user deploys the backend like PulseAudio that checks the jack detection state, the behavior change isn't always acceptable for some users. As a mitigation, this patch introduces an option to switch the behavior back to the old-good-days: when the new option, single_port=1, is passed, the driver creates only a single PCM device, and it's assigned to the first connected one, like the earlier versions did. The option is turned off as default still to support the multiple monitors. Fixes: 8a2d6ae1f737 ("ALSA: x86: Register multiple PCM devices for the LPE audio card") Reported-and-tested-by: Hubert Mantel Signed-off-by: Takashi Iwai --- sound/x86/intel_hdmi_audio.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/sound/x86/intel_hdmi_audio.c b/sound/x86/intel_hdmi_audio.c index a0951505c7f5..96115c401292 100644 --- a/sound/x86/intel_hdmi_audio.c +++ b/sound/x86/intel_hdmi_audio.c @@ -50,6 +50,7 @@ /*standard module options for ALSA. This module supports only one card*/ static int hdmi_card_index = SNDRV_DEFAULT_IDX1; static char *hdmi_card_id = SNDRV_DEFAULT_STR1; +static bool single_port; module_param_named(index, hdmi_card_index, int, 0444); MODULE_PARM_DESC(index, @@ -57,6 +58,9 @@ MODULE_PARM_DESC(index, module_param_named(id, hdmi_card_id, charp, 0444); MODULE_PARM_DESC(id, "ID string for INTEL Intel HDMI Audio controller."); +module_param(single_port, bool, 0444); +MODULE_PARM_DESC(single_port, + "Single-port mode (for compatibility)"); /* * ELD SA bits in the CEA Speaker Allocation data block @@ -1579,7 +1583,11 @@ static irqreturn_t display_pipe_interrupt_handler(int irq, void *dev_id) static void notify_audio_lpe(struct platform_device *pdev, int port) { struct snd_intelhad_card *card_ctx = platform_get_drvdata(pdev); - struct snd_intelhad *ctx = &card_ctx->pcm_ctx[port]; + struct snd_intelhad *ctx; + + ctx = &card_ctx->pcm_ctx[single_port ? 0 : port]; + if (single_port) + ctx->port = port; schedule_work(&ctx->hdmi_audio_wq); } @@ -1816,7 +1824,7 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev) init_channel_allocations(); card_ctx->num_pipes = pdata->num_pipes; - card_ctx->num_ports = pdata->num_ports; + card_ctx->num_ports = single_port ? 1 : pdata->num_ports; for_each_port(card_ctx, port) { struct snd_intelhad *ctx = &card_ctx->pcm_ctx[port]; @@ -1824,7 +1832,7 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev) ctx->card_ctx = card_ctx; ctx->dev = card_ctx->dev; - ctx->port = port; + ctx->port = single_port ? -1 : port; ctx->pipe = -1; INIT_WORK(&ctx->hdmi_audio_wq, had_audio_wq); -- 2.30.2