From 7472f38b10c884f47241529d1367f77c2e1b3551 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 18 Apr 2008 18:47:54 -0700 Subject: [PATCH] usb: gadget zero style fixups (mostly whitespace) Minor updates to "Gadget Zero". - Primarily these are whitespace updates to address the fact that since this was written, Documentation/CodingStyle was changed to disapprove of parts of the original coding style. - Update a few comments that weren't quite correct, notably mentioning the "autoresume" module parameter. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/zero.c | 365 ++++++++++++++++++-------------------- 1 file changed, 172 insertions(+), 193 deletions(-) diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index d3d4f4048e6c..9c5057c63327 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -23,9 +23,7 @@ /* * Gadget Zero only needs two bulk endpoints, and is an example of how you * can write a hardware-agnostic gadget driver running inside a USB device. - * - * Hardware details are visible (see CONFIG_USB_ZERO_* below) but don't - * affect most of the driver. + * Some hardware details are visible, but don't affect most of the driver. * * Use it with the Linux host/master side "usbtest" driver to get a basic * functional test of your device-side usb stack, or with "usb-skeleton". @@ -37,6 +35,7 @@ * buflen=N default N=4096, buffer size used * qlen=N default N=32, how many buffers in the loopback queue * loopdefault default false, list loopback config first + * autoresume=N default N=0, seconds before triggering remote wakeup * * Many drivers will only have one configuration, letting them be much * simpler if they also don't support high speed operation (like this @@ -62,13 +61,13 @@ /*-------------------------------------------------------------------------*/ -#define DRIVER_VERSION "Lughnasadh, 2007" +#define DRIVER_VERSION "Earth Day 2008" -static const char shortname [] = "zero"; -static const char longname [] = "Gadget Zero"; +static const char shortname[] = "zero"; +static const char longname[] = "Gadget Zero"; -static const char source_sink [] = "source and sink data"; -static const char loopback [] = "loop input to output"; +static const char source_sink[] = "source and sink data"; +static const char loopback[] = "loop input to output"; /*-------------------------------------------------------------------------*/ @@ -120,16 +119,16 @@ static unsigned buflen = 4096; static unsigned qlen = 32; static unsigned pattern = 0; -module_param (buflen, uint, S_IRUGO); -module_param (qlen, uint, S_IRUGO); -module_param (pattern, uint, S_IRUGO|S_IWUSR); +module_param(buflen, uint, S_IRUGO); +module_param(qlen, uint, S_IRUGO); +module_param(pattern, uint, S_IRUGO|S_IWUSR); /* * if it's nonzero, autoresume says how many seconds to wait * before trying to wake up the host after suspend. */ static unsigned autoresume = 0; -module_param (autoresume, uint, 0); +module_param(autoresume, uint, 0); /* * Normally the "loopback" configuration is second (index 1) so @@ -138,8 +137,7 @@ module_param (autoresume, uint, 0); * Or controllers (like superh) that only support one config. */ static int loopdefault = 0; - -module_param (loopdefault, bool, S_IRUGO|S_IWUSR); +module_param(loopdefault, bool, S_IRUGO|S_IWUSR); /*-------------------------------------------------------------------------*/ @@ -176,24 +174,22 @@ module_param (loopdefault, bool, S_IRUGO|S_IWUSR); #define CONFIG_SOURCE_SINK 3 #define CONFIG_LOOPBACK 2 -static struct usb_device_descriptor -device_desc = { +static struct usb_device_descriptor device_desc = { .bLength = sizeof device_desc, .bDescriptorType = USB_DT_DEVICE, - .bcdUSB = __constant_cpu_to_le16 (0x0200), + .bcdUSB = __constant_cpu_to_le16(0x0200), .bDeviceClass = USB_CLASS_VENDOR_SPEC, - .idVendor = __constant_cpu_to_le16 (DRIVER_VENDOR_NUM), - .idProduct = __constant_cpu_to_le16 (DRIVER_PRODUCT_NUM), + .idVendor = __constant_cpu_to_le16(DRIVER_VENDOR_NUM), + .idProduct = __constant_cpu_to_le16(DRIVER_PRODUCT_NUM), .iManufacturer = STRING_MANUFACTURER, .iProduct = STRING_PRODUCT, .iSerialNumber = STRING_SERIAL, .bNumConfigurations = 2, }; -static struct usb_config_descriptor -source_sink_config = { +static struct usb_config_descriptor source_sink_config = { .bLength = sizeof source_sink_config, .bDescriptorType = USB_DT_CONFIG, @@ -205,8 +201,7 @@ source_sink_config = { .bMaxPower = 1, /* self-powered */ }; -static struct usb_config_descriptor -loopback_config = { +static struct usb_config_descriptor loopback_config = { .bLength = sizeof loopback_config, .bDescriptorType = USB_DT_CONFIG, @@ -218,8 +213,7 @@ loopback_config = { .bMaxPower = 1, /* self-powered */ }; -static struct usb_otg_descriptor -otg_descriptor = { +static struct usb_otg_descriptor otg_descriptor = { .bLength = sizeof otg_descriptor, .bDescriptorType = USB_DT_OTG, @@ -228,8 +222,7 @@ otg_descriptor = { /* one interface in each configuration */ -static const struct usb_interface_descriptor -source_sink_intf = { +static const struct usb_interface_descriptor source_sink_intf = { .bLength = sizeof source_sink_intf, .bDescriptorType = USB_DT_INTERFACE, @@ -238,8 +231,7 @@ source_sink_intf = { .iInterface = STRING_SOURCE_SINK, }; -static const struct usb_interface_descriptor -loopback_intf = { +static const struct usb_interface_descriptor loopback_intf = { .bLength = sizeof loopback_intf, .bDescriptorType = USB_DT_INTERFACE, @@ -250,8 +242,7 @@ loopback_intf = { /* two full speed bulk endpoints; their use is config-dependent */ -static struct usb_endpoint_descriptor -fs_source_desc = { +static struct usb_endpoint_descriptor fs_source_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, @@ -259,8 +250,7 @@ fs_source_desc = { .bmAttributes = USB_ENDPOINT_XFER_BULK, }; -static struct usb_endpoint_descriptor -fs_sink_desc = { +static struct usb_endpoint_descriptor fs_sink_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, @@ -268,7 +258,7 @@ fs_sink_desc = { .bmAttributes = USB_ENDPOINT_XFER_BULK, }; -static const struct usb_descriptor_header *fs_source_sink_function [] = { +static const struct usb_descriptor_header *fs_source_sink_function[] = { (struct usb_descriptor_header *) &otg_descriptor, (struct usb_descriptor_header *) &source_sink_intf, (struct usb_descriptor_header *) &fs_sink_desc, @@ -276,7 +266,7 @@ static const struct usb_descriptor_header *fs_source_sink_function [] = { NULL, }; -static const struct usb_descriptor_header *fs_loopback_function [] = { +static const struct usb_descriptor_header *fs_loopback_function[] = { (struct usb_descriptor_header *) &otg_descriptor, (struct usb_descriptor_header *) &loopback_intf, (struct usb_descriptor_header *) &fs_sink_desc, @@ -293,36 +283,33 @@ static const struct usb_descriptor_header *fs_loopback_function [] = { * for the config descriptor. */ -static struct usb_endpoint_descriptor -hs_source_desc = { +static struct usb_endpoint_descriptor hs_source_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16 (512), + .wMaxPacketSize = __constant_cpu_to_le16(512), }; -static struct usb_endpoint_descriptor -hs_sink_desc = { +static struct usb_endpoint_descriptor hs_sink_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16 (512), + .wMaxPacketSize = __constant_cpu_to_le16(512), }; -static struct usb_qualifier_descriptor -dev_qualifier = { +static struct usb_qualifier_descriptor dev_qualifier = { .bLength = sizeof dev_qualifier, .bDescriptorType = USB_DT_DEVICE_QUALIFIER, - .bcdUSB = __constant_cpu_to_le16 (0x0200), + .bcdUSB = __constant_cpu_to_le16(0x0200), .bDeviceClass = USB_CLASS_VENDOR_SPEC, .bNumConfigurations = 2, }; -static const struct usb_descriptor_header *hs_source_sink_function [] = { +static const struct usb_descriptor_header *hs_source_sink_function[] = { (struct usb_descriptor_header *) &otg_descriptor, (struct usb_descriptor_header *) &source_sink_intf, (struct usb_descriptor_header *) &hs_source_desc, @@ -330,7 +317,7 @@ static const struct usb_descriptor_header *hs_source_sink_function [] = { NULL, }; -static const struct usb_descriptor_header *hs_loopback_function [] = { +static const struct usb_descriptor_header *hs_loopback_function[] = { (struct usb_descriptor_header *) &otg_descriptor, (struct usb_descriptor_header *) &loopback_intf, (struct usb_descriptor_header *) &hs_source_desc, @@ -355,7 +342,7 @@ static char serial[] = "0123456789.0123456789.0123456789"; /* static strings, in UTF-8 */ -static struct usb_string strings [] = { +static struct usb_string strings[] = { { STRING_MANUFACTURER, manufacturer, }, { STRING_PRODUCT, longname, }, { STRING_SERIAL, serial, }, @@ -364,7 +351,7 @@ static struct usb_string strings [] = { { } /* end of list */ }; -static struct usb_gadget_strings stringtab = { +static struct usb_gadget_strings stringtab = { .language = 0x0409, /* en-us */ .strings = strings, }; @@ -387,8 +374,7 @@ static struct usb_gadget_strings stringtab = { * high bandwidth modes at high speed. (Maybe work like Intel's test * device?) */ -static int -config_buf (struct usb_gadget *gadget, +static int config_buf(struct usb_gadget *gadget, u8 *buf, u8 type, unsigned index) { int is_source_sink; @@ -419,7 +405,7 @@ config_buf (struct usb_gadget *gadget, if (!gadget_is_otg(gadget)) function++; - len = usb_gadget_config_buf (is_source_sink + len = usb_gadget_config_buf(is_source_sink ? &source_sink_config : &loopback_config, buf, USB_BUFSIZ, function); @@ -431,27 +417,26 @@ config_buf (struct usb_gadget *gadget, /*-------------------------------------------------------------------------*/ -static struct usb_request * -alloc_ep_req (struct usb_ep *ep, unsigned length) +static struct usb_request *alloc_ep_req(struct usb_ep *ep, unsigned length) { struct usb_request *req; - req = usb_ep_alloc_request (ep, GFP_ATOMIC); + req = usb_ep_alloc_request(ep, GFP_ATOMIC); if (req) { req->length = length; req->buf = kmalloc(length, GFP_ATOMIC); if (!req->buf) { - usb_ep_free_request (ep, req); + usb_ep_free_request(ep, req); req = NULL; } } return req; } -static void free_ep_req (struct usb_ep *ep, struct usb_request *req) +static void free_ep_req(struct usb_ep *ep, struct usb_request *req) { kfree(req->buf); - usb_ep_free_request (ep, req); + usb_ep_free_request(ep, req); } /*-------------------------------------------------------------------------*/ @@ -472,7 +457,7 @@ static void free_ep_req (struct usb_ep *ep, struct usb_request *req) /* optionally require specific source/sink data patterns */ static int -check_read_data ( +check_read_data( struct zero_dev *dev, struct usb_ep *ep, struct usb_request *req @@ -498,8 +483,8 @@ check_read_data ( continue; break; } - ERROR (dev, "bad OUT byte, buf [%d] = %d\n", i, *buf); - usb_ep_set_halt (ep); + ERROR(dev, "bad OUT byte, buf[%d] = %d\n", i, *buf); + usb_ep_set_halt(ep); return -EINVAL; } return 0; @@ -512,7 +497,7 @@ static void reinit_write_data(struct usb_ep *ep, struct usb_request *req) switch (pattern) { case 0: - memset (req->buf, 0, req->length); + memset(req->buf, 0, req->length); break; case 1: for (i = 0; i < req->length; i++) @@ -525,7 +510,7 @@ static void reinit_write_data(struct usb_ep *ep, struct usb_request *req) * irq delay between end of one request and start of the next. * that prevents using hardware dma queues. */ -static void source_sink_complete (struct usb_ep *ep, struct usb_request *req) +static void source_sink_complete(struct usb_ep *ep, struct usb_request *req) { struct zero_dev *dev = ep->driver_data; int status = req->status; @@ -534,8 +519,8 @@ static void source_sink_complete (struct usb_ep *ep, struct usb_request *req) case 0: /* normal completion? */ if (ep == dev->out_ep) { - check_read_data (dev, ep, req); - memset (req->buf, 0x55, req->length); + check_read_data(dev, ep, req); + memset(req->buf, 0x55, req->length); } else reinit_write_data(ep, req); break; @@ -544,11 +529,11 @@ static void source_sink_complete (struct usb_ep *ep, struct usb_request *req) case -ECONNABORTED: /* hardware forced ep reset */ case -ECONNRESET: /* request dequeued */ case -ESHUTDOWN: /* disconnect from host */ - VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status, + VDBG(dev, "%s gone (%d), %d/%d\n", ep->name, status, req->actual, req->length); if (ep == dev->out_ep) - check_read_data (dev, ep, req); - free_ep_req (ep, req); + check_read_data(dev, ep, req); + free_ep_req(ep, req); return; case -EOVERFLOW: /* buffer overrun on read means that @@ -557,18 +542,18 @@ static void source_sink_complete (struct usb_ep *ep, struct usb_request *req) */ default: #if 1 - DBG (dev, "%s complete --> %d, %d/%d\n", ep->name, + DBG(dev, "%s complete --> %d, %d/%d\n", ep->name, status, req->actual, req->length); #endif case -EREMOTEIO: /* short read */ break; } - status = usb_ep_queue (ep, req, GFP_ATOMIC); + status = usb_ep_queue(ep, req, GFP_ATOMIC); if (status) { - ERROR (dev, "kill %s: resubmit %d bytes --> %d\n", + ERROR(dev, "kill %s: resubmit %d bytes --> %d\n", ep->name, req->length, status); - usb_ep_set_halt (ep); + usb_ep_set_halt(ep); /* FIXME recover later ... somehow */ } } @@ -578,24 +563,24 @@ static struct usb_request *source_sink_start_ep(struct usb_ep *ep) struct usb_request *req; int status; - req = alloc_ep_req (ep, buflen); + req = alloc_ep_req(ep, buflen); if (!req) return NULL; - memset (req->buf, 0, req->length); + memset(req->buf, 0, req->length); req->complete = source_sink_complete; - if (strcmp (ep->name, EP_IN_NAME) == 0) + if (strcmp(ep->name, EP_IN_NAME) == 0) reinit_write_data(ep, req); else - memset (req->buf, 0x55, req->length); + memset(req->buf, 0x55, req->length); status = usb_ep_queue(ep, req, GFP_ATOMIC); if (status) { struct zero_dev *dev = ep->driver_data; - ERROR (dev, "start %s --> %d\n", ep->name, status); - free_ep_req (ep, req); + ERROR(dev, "start %s --> %d\n", ep->name, status); + free_ep_req(ep, req); req = NULL; } @@ -608,34 +593,34 @@ static int set_source_sink_config(struct zero_dev *dev) struct usb_ep *ep; struct usb_gadget *gadget = dev->gadget; - gadget_for_each_ep (ep, gadget) { + gadget_for_each_ep(ep, gadget) { const struct usb_endpoint_descriptor *d; /* one endpoint writes (sources) zeroes in (to the host) */ - if (strcmp (ep->name, EP_IN_NAME) == 0) { - d = ep_desc (gadget, &hs_source_desc, &fs_source_desc); - result = usb_ep_enable (ep, d); + if (strcmp(ep->name, EP_IN_NAME) == 0) { + d = ep_desc(gadget, &hs_source_desc, &fs_source_desc); + result = usb_ep_enable(ep, d); if (result == 0) { ep->driver_data = dev; if (source_sink_start_ep(ep) != NULL) { dev->in_ep = ep; continue; } - usb_ep_disable (ep); + usb_ep_disable(ep); result = -EIO; } /* one endpoint reads (sinks) anything out (from the host) */ - } else if (strcmp (ep->name, EP_OUT_NAME) == 0) { - d = ep_desc (gadget, &hs_sink_desc, &fs_sink_desc); - result = usb_ep_enable (ep, d); + } else if (strcmp(ep->name, EP_OUT_NAME) == 0) { + d = ep_desc(gadget, &hs_sink_desc, &fs_sink_desc); + result = usb_ep_enable(ep, d); if (result == 0) { ep->driver_data = dev; if (source_sink_start_ep(ep) != NULL) { dev->out_ep = ep; continue; } - usb_ep_disable (ep); + usb_ep_disable(ep); result = -EIO; } @@ -644,11 +629,11 @@ static int set_source_sink_config(struct zero_dev *dev) continue; /* stop on error */ - ERROR (dev, "can't start %s, result %d\n", ep->name, result); + ERROR(dev, "can't start %s, result %d\n", ep->name, result); break; } if (result == 0) - DBG (dev, "buflen %d\n", buflen); + DBG(dev, "buflen %d\n", buflen); /* caller is responsible for cleanup on error */ return result; @@ -656,7 +641,7 @@ static int set_source_sink_config(struct zero_dev *dev) /*-------------------------------------------------------------------------*/ -static void loopback_complete (struct usb_ep *ep, struct usb_request *req) +static void loopback_complete(struct usb_ep *ep, struct usb_request *req) { struct zero_dev *dev = ep->driver_data; int status = req->status; @@ -668,19 +653,19 @@ static void loopback_complete (struct usb_ep *ep, struct usb_request *req) /* loop this OUT packet back IN to the host */ req->zero = (req->actual < req->length); req->length = req->actual; - status = usb_ep_queue (dev->in_ep, req, GFP_ATOMIC); + status = usb_ep_queue(dev->in_ep, req, GFP_ATOMIC); if (status == 0) return; /* "should never get here" */ - ERROR (dev, "can't loop %s to %s: %d\n", + ERROR(dev, "can't loop %s to %s: %d\n", ep->name, dev->in_ep->name, status); } /* queue the buffer for some later OUT packet */ req->length = buflen; - status = usb_ep_queue (dev->out_ep, req, GFP_ATOMIC); + status = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC); if (status == 0) return; @@ -688,7 +673,7 @@ static void loopback_complete (struct usb_ep *ep, struct usb_request *req) /* FALLTHROUGH */ default: - ERROR (dev, "%s loop complete --> %d, %d/%d\n", ep->name, + ERROR(dev, "%s loop complete --> %d, %d/%d\n", ep->name, status, req->actual, req->length); /* FALLTHROUGH */ @@ -700,7 +685,7 @@ static void loopback_complete (struct usb_ep *ep, struct usb_request *req) case -ECONNABORTED: /* hardware forced ep reset */ case -ECONNRESET: /* request dequeued */ case -ESHUTDOWN: /* disconnect from host */ - free_ep_req (ep, req); + free_ep_req(ep, req); return; } } @@ -711,13 +696,13 @@ static int set_loopback_config(struct zero_dev *dev) struct usb_ep *ep; struct usb_gadget *gadget = dev->gadget; - gadget_for_each_ep (ep, gadget) { + gadget_for_each_ep(ep, gadget) { const struct usb_endpoint_descriptor *d; /* one endpoint writes data back IN to the host */ - if (strcmp (ep->name, EP_IN_NAME) == 0) { - d = ep_desc (gadget, &hs_source_desc, &fs_source_desc); - result = usb_ep_enable (ep, d); + if (strcmp(ep->name, EP_IN_NAME) == 0) { + d = ep_desc(gadget, &hs_source_desc, &fs_source_desc); + result = usb_ep_enable(ep, d); if (result == 0) { ep->driver_data = dev; dev->in_ep = ep; @@ -725,9 +710,9 @@ static int set_loopback_config(struct zero_dev *dev) } /* one endpoint just reads OUT packets */ - } else if (strcmp (ep->name, EP_OUT_NAME) == 0) { - d = ep_desc (gadget, &hs_sink_desc, &fs_sink_desc); - result = usb_ep_enable (ep, d); + } else if (strcmp(ep->name, EP_OUT_NAME) == 0) { + d = ep_desc(gadget, &hs_sink_desc, &fs_sink_desc); + result = usb_ep_enable(ep, d); if (result == 0) { ep->driver_data = dev; dev->out_ep = ep; @@ -739,7 +724,7 @@ static int set_loopback_config(struct zero_dev *dev) continue; /* stop on error */ - ERROR (dev, "can't enable %s, result %d\n", ep->name, result); + ERROR(dev, "can't enable %s, result %d\n", ep->name, result); break; } @@ -753,19 +738,19 @@ static int set_loopback_config(struct zero_dev *dev) ep = dev->out_ep; for (i = 0; i < qlen && result == 0; i++) { - req = alloc_ep_req (ep, buflen); + req = alloc_ep_req(ep, buflen); if (req) { req->complete = loopback_complete; - result = usb_ep_queue (ep, req, GFP_ATOMIC); + result = usb_ep_queue(ep, req, GFP_ATOMIC); if (result) - DBG (dev, "%s queue req --> %d\n", + DBG(dev, "%s queue req --> %d\n", ep->name, result); } else result = -ENOMEM; } } if (result == 0) - DBG (dev, "qlen %d, buflen %d\n", qlen, buflen); + DBG(dev, "qlen %d, buflen %d\n", qlen, buflen); /* caller is responsible for cleanup on error */ return result; @@ -773,26 +758,26 @@ static int set_loopback_config(struct zero_dev *dev) /*-------------------------------------------------------------------------*/ -static void zero_reset_config (struct zero_dev *dev) +static void zero_reset_config(struct zero_dev *dev) { if (dev->config == 0) return; - DBG (dev, "reset config\n"); + DBG(dev, "reset config\n"); /* just disable endpoints, forcing completion of pending i/o. * all our completion handlers free their requests in this case. */ if (dev->in_ep) { - usb_ep_disable (dev->in_ep); + usb_ep_disable(dev->in_ep); dev->in_ep = NULL; } if (dev->out_ep) { - usb_ep_disable (dev->out_ep); + usb_ep_disable(dev->out_ep); dev->out_ep = NULL; } dev->config = 0; - del_timer (&dev->resume); + del_timer(&dev->resume); } /* change our operational config. this code must agree with the code @@ -813,12 +798,12 @@ static int zero_set_config(struct zero_dev *dev, unsigned number) if (number == dev->config) return 0; - if (gadget_is_sa1100 (gadget) && dev->config) { + if (gadget_is_sa1100(gadget) && dev->config) { /* tx fifo is full, but we can't clear it...*/ ERROR(dev, "can't change configurations\n"); return -ESPIPE; } - zero_reset_config (dev); + zero_reset_config(dev); switch (number) { case CONFIG_SOURCE_SINK: @@ -837,7 +822,7 @@ static int zero_set_config(struct zero_dev *dev, unsigned number) if (!result && (!dev->in_ep || !dev->out_ep)) result = -ENODEV; if (result) - zero_reset_config (dev); + zero_reset_config(dev); else { char *speed; @@ -849,7 +834,7 @@ static int zero_set_config(struct zero_dev *dev, unsigned number) } dev->config = number; - INFO (dev, "%s speed config #%d: %s\n", speed, number, + INFO(dev, "%s speed config #%d: %s\n", speed, number, (number == CONFIG_SOURCE_SINK) ? source_sink : loopback); } @@ -858,10 +843,10 @@ static int zero_set_config(struct zero_dev *dev, unsigned number) /*-------------------------------------------------------------------------*/ -static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req) +static void zero_setup_complete(struct usb_ep *ep, struct usb_request *req) { if (req->status || req->actual != req->length) - DBG ((struct zero_dev *) ep->driver_data, + DBG((struct zero_dev *) ep->driver_data, "setup complete --> %d, %d/%d\n", req->status, req->actual, req->length); } @@ -874,9 +859,9 @@ static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req) * the work is in config-specific setup. */ static int -zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) +zero_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) { - struct zero_dev *dev = get_gadget_data (gadget); + struct zero_dev *dev = get_gadget_data(gadget); struct usb_request *req = dev->req; int value = -EOPNOTSUPP; u16 w_index = le16_to_cpu(ctrl->wIndex); @@ -895,14 +880,14 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) switch (w_value >> 8) { case USB_DT_DEVICE: - value = min (w_length, (u16) sizeof device_desc); - memcpy (req->buf, &device_desc, value); + value = min(w_length, (u16) sizeof device_desc); + memcpy(req->buf, &device_desc, value); break; case USB_DT_DEVICE_QUALIFIER: if (!gadget_is_dualspeed(gadget)) break; - value = min (w_length, (u16) sizeof dev_qualifier); - memcpy (req->buf, &dev_qualifier, value); + value = min(w_length, (u16) sizeof dev_qualifier); + memcpy(req->buf, &dev_qualifier, value); break; case USB_DT_OTHER_SPEED_CONFIG: @@ -910,11 +895,11 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) break; // FALLTHROUGH case USB_DT_CONFIG: - value = config_buf (gadget, req->buf, + value = config_buf(gadget, req->buf, w_value >> 8, w_value & 0xff); if (value >= 0) - value = min (w_length, (u16) value); + value = min(w_length, (u16) value); break; case USB_DT_STRING: @@ -923,10 +908,10 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) * add string tables for other languages, using * any UTF-8 characters */ - value = usb_gadget_get_string (&stringtab, + value = usb_gadget_get_string(&stringtab, w_value & 0xff, req->buf); if (value >= 0) - value = min (w_length, (u16) value); + value = min(w_length, (u16) value); break; } break; @@ -936,20 +921,20 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) if (ctrl->bRequestType != 0) goto unknown; if (gadget->a_hnp_support) - DBG (dev, "HNP available\n"); + DBG(dev, "HNP available\n"); else if (gadget->a_alt_hnp_support) - DBG (dev, "HNP needs a different root port\n"); + DBG(dev, "HNP needs a different root port\n"); else - VDBG (dev, "HNP inactive\n"); - spin_lock (&dev->lock); + VDBG(dev, "HNP inactive\n"); + spin_lock(&dev->lock); value = zero_set_config(dev, w_value); - spin_unlock (&dev->lock); + spin_unlock(&dev->lock); break; case USB_REQ_GET_CONFIGURATION: if (ctrl->bRequestType != USB_DIR_IN) goto unknown; *(u8 *)req->buf = dev->config; - value = min (w_length, (u16) 1); + value = min(w_length, (u16) 1); break; /* until we add altsetting support, or other interfaces, @@ -959,7 +944,7 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) case USB_REQ_SET_INTERFACE: if (ctrl->bRequestType != USB_RECIP_INTERFACE) goto unknown; - spin_lock (&dev->lock); + spin_lock(&dev->lock); if (dev->config && w_index == 0 && w_value == 0) { u8 config = dev->config; @@ -970,11 +955,11 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) * if we had more than one interface we couldn't * use this "reset the config" shortcut. */ - zero_reset_config (dev); + zero_reset_config(dev); zero_set_config(dev, config); value = 0; } - spin_unlock (&dev->lock); + spin_unlock(&dev->lock); break; case USB_REQ_GET_INTERFACE: if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) @@ -986,7 +971,7 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) break; } *(u8 *)req->buf = 0; - value = min (w_length, (u16) 1); + value = min(w_length, (u16) 1); break; /* @@ -1018,7 +1003,7 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) default: unknown: - VDBG (dev, + VDBG(dev, "unknown control req%02x.%02x v%04x i%04x l%d\n", ctrl->bRequestType, ctrl->bRequest, w_value, w_index, w_length); @@ -1028,11 +1013,11 @@ unknown: if (value >= 0) { req->length = value; req->zero = value < w_length; - value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC); + value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC); if (value < 0) { - DBG (dev, "ep_queue --> %d\n", value); + DBG(dev, "ep_queue --> %d\n", value); req->status = 0; - zero_setup_complete (gadget->ep0, req); + zero_setup_complete(gadget->ep0, req); } } @@ -1040,28 +1025,26 @@ unknown: return value; } -static void -zero_disconnect (struct usb_gadget *gadget) +static void zero_disconnect(struct usb_gadget *gadget) { - struct zero_dev *dev = get_gadget_data (gadget); + struct zero_dev *dev = get_gadget_data(gadget); unsigned long flags; - spin_lock_irqsave (&dev->lock, flags); - zero_reset_config (dev); + spin_lock_irqsave(&dev->lock, flags); + zero_reset_config(dev); /* a more significant application might have some non-usb * activities to quiesce here, saving resources like power * or pushing the notification up a network stack. */ - spin_unlock_irqrestore (&dev->lock, flags); + spin_unlock_irqrestore(&dev->lock, flags); /* next we may get setup() calls to enumerate new connections; * or an unbind() during shutdown (including removing module). */ } -static void -zero_autoresume (unsigned long _dev) +static void zero_autoresume(unsigned long _dev) { struct zero_dev *dev = (struct zero_dev *) _dev; int status; @@ -1070,32 +1053,30 @@ zero_autoresume (unsigned long _dev) * more significant than just a timer firing... */ if (dev->gadget->speed != USB_SPEED_UNKNOWN) { - status = usb_gadget_wakeup (dev->gadget); - DBG (dev, "wakeup --> %d\n", status); + status = usb_gadget_wakeup(dev->gadget); + DBG(dev, "wakeup --> %d\n", status); } } /*-------------------------------------------------------------------------*/ -static void /* __init_or_exit */ -zero_unbind (struct usb_gadget *gadget) +static void zero_unbind(struct usb_gadget *gadget) { - struct zero_dev *dev = get_gadget_data (gadget); + struct zero_dev *dev = get_gadget_data(gadget); - DBG (dev, "unbind\n"); + DBG(dev, "unbind\n"); /* we've already been disconnected ... no i/o is active */ if (dev->req) { dev->req->length = USB_BUFSIZ; - free_ep_req (gadget->ep0, dev->req); + free_ep_req(gadget->ep0, dev->req); } - del_timer_sync (&dev->resume); - kfree (dev); - set_gadget_data (gadget, NULL); + del_timer_sync(&dev->resume); + kfree(dev); + set_gadget_data(gadget, NULL); } -static int __init -zero_bind (struct usb_gadget *gadget) +static int __init zero_bind(struct usb_gadget *gadget) { struct zero_dev *dev; struct usb_ep *ep; @@ -1111,8 +1092,8 @@ zero_bind (struct usb_gadget *gadget) * autoconfigure on any sane usb controller driver, * but there may also be important quirks to address. */ - usb_ep_autoconfig_reset (gadget); - ep = usb_ep_autoconfig (gadget, &fs_source_desc); + usb_ep_autoconfig_reset(gadget); + ep = usb_ep_autoconfig(gadget, &fs_source_desc); if (!ep) { autoconf_fail: pr_err("%s: can't autoconfigure on %s\n", @@ -1122,15 +1103,15 @@ autoconf_fail: EP_IN_NAME = ep->name; ep->driver_data = ep; /* claim */ - ep = usb_ep_autoconfig (gadget, &fs_sink_desc); + ep = usb_ep_autoconfig(gadget, &fs_sink_desc); if (!ep) goto autoconf_fail; EP_OUT_NAME = ep->name; ep->driver_data = ep; /* claim */ - gcnum = usb_gadget_controller_number (gadget); + gcnum = usb_gadget_controller_number(gadget); if (gcnum >= 0) - device_desc.bcdDevice = cpu_to_le16 (0x0200 + gcnum); + device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum); else { /* gadget zero is so simple (for now, no altsettings) that * it SHOULD NOT have problems with bulk-capable hardware. @@ -1141,7 +1122,7 @@ autoconf_fail: */ pr_warning("%s: controller '%s' not recognized\n", shortname, gadget->name); - device_desc.bcdDevice = __constant_cpu_to_le16 (0x9999); + device_desc.bcdDevice = __constant_cpu_to_le16(0x9999); } @@ -1149,12 +1130,12 @@ autoconf_fail: dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (!dev) return -ENOMEM; - spin_lock_init (&dev->lock); + spin_lock_init(&dev->lock); dev->gadget = gadget; - set_gadget_data (gadget, dev); + set_gadget_data(gadget, dev); /* preallocate control response and buffer */ - dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL); + dev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL); if (!dev->req) goto enomem; dev->req->buf = kmalloc(USB_BUFSIZ, GFP_KERNEL); @@ -1182,9 +1163,9 @@ autoconf_fail: loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP; } - usb_gadget_set_selfpowered (gadget); + usb_gadget_set_selfpowered(gadget); - init_timer (&dev->resume); + init_timer(&dev->resume); dev->resume.function = zero_autoresume; dev->resume.data = (unsigned long) dev; if (autoresume) { @@ -1194,45 +1175,43 @@ autoconf_fail: gadget->ep0->driver_data = dev; - INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname); - INFO (dev, "using %s, OUT %s IN %s\n", gadget->name, + INFO(dev, "%s, version: " DRIVER_VERSION "\n", longname); + INFO(dev, "using %s, OUT %s IN %s\n", gadget->name, EP_OUT_NAME, EP_IN_NAME); - snprintf (manufacturer, sizeof manufacturer, "%s %s with %s", + snprintf(manufacturer, sizeof manufacturer, "%s %s with %s", init_utsname()->sysname, init_utsname()->release, gadget->name); return 0; enomem: - zero_unbind (gadget); + zero_unbind(gadget); return -ENOMEM; } /*-------------------------------------------------------------------------*/ -static void -zero_suspend (struct usb_gadget *gadget) +static void zero_suspend(struct usb_gadget *gadget) { - struct zero_dev *dev = get_gadget_data (gadget); + struct zero_dev *dev = get_gadget_data(gadget); if (gadget->speed == USB_SPEED_UNKNOWN) return; if (autoresume) { - mod_timer (&dev->resume, jiffies + (HZ * autoresume)); - DBG (dev, "suspend, wakeup in %d seconds\n", autoresume); + mod_timer(&dev->resume, jiffies + (HZ * autoresume)); + DBG(dev, "suspend, wakeup in %d seconds\n", autoresume); } else - DBG (dev, "suspend\n"); + DBG(dev, "suspend\n"); } -static void -zero_resume (struct usb_gadget *gadget) +static void zero_resume(struct usb_gadget *gadget) { - struct zero_dev *dev = get_gadget_data (gadget); + struct zero_dev *dev = get_gadget_data(gadget); - DBG (dev, "resume\n"); - del_timer (&dev->resume); + DBG(dev, "resume\n"); + del_timer(&dev->resume); } @@ -1264,15 +1243,15 @@ MODULE_AUTHOR("David Brownell"); MODULE_LICENSE("GPL"); -static int __init init (void) +static int __init init(void) { - return usb_gadget_register_driver (&zero_driver); + return usb_gadget_register_driver(&zero_driver); } -module_init (init); +module_init(init); -static void __exit cleanup (void) +static void __exit cleanup(void) { - usb_gadget_unregister_driver (&zero_driver); + usb_gadget_unregister_driver(&zero_driver); } -module_exit (cleanup); +module_exit(cleanup); -- 2.30.2