From 7533d714d3325597918e614469b9a80be5ccca03 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Fri, 9 May 2008 08:19:30 +0000 Subject: [PATCH] mkzynfw: add definitions for the P-2602HW-D1A SVN-Revision: 11096 --- src/mkzynfw.c | 27 +++++++++++++++++++-------- src/zynos.h | 8 ++++---- 2 files changed, 23 insertions(+), 12 deletions(-) diff --git a/src/mkzynfw.c b/src/mkzynfw.c index f8c7159..9009d50 100644 --- a/src/mkzynfw.c +++ b/src/mkzynfw.c @@ -1,8 +1,8 @@ /* * $Id$ * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos + * Copyright (C) 2007-2008 OpenWrt.org + * Copyright (C) 2007-2008 Gabor Juhos * * This code was based on the information of the ZyXEL's firmware * image format written by Kolja Waschk, can be found at: @@ -95,7 +95,7 @@ struct board_info { uint32_t flash_base; /* flash base address */ uint32_t flash_size; /* board flash size */ uint32_t code_start; /* code start address */ - uint32_t fw_offs; /* offset of the firmware within the flash */ + uint32_t romio_offs; /* offset of the firmware within the flash */ }; /* @@ -125,7 +125,7 @@ int num_blocks = 0; .name = (n), .desc=(d), \ .vendor = (v), .model = (m), \ .flash_base = (fb), .flash_size = (fs)<<20, \ - .code_start = (cs), .fw_offs = (fo) \ + .code_start = (cs), .romio_offs = (fo) \ } #define ADMBOARD1(n, d, m, fs) BOARD(n, d, ZYNOS_VENDOR_ID_ZYXEL, m, \ @@ -164,6 +164,17 @@ static struct board_info boards[] = { ADMBOARD1("P-335U", "ZyXEL Prestige 335U", ZYNOS_MODEL_P_335U, 4), ADMBOARD1("P-335WT", "ZyXEL Prestige 335WT", ZYNOS_MODEL_P_335WT, 4), + { + .name = "P-2602HW-D1A", + .desc = "ZyXEL P-2602HW-D1A", + .vendor = ZYNOS_VENDOR_ID_ZYXEL, + .model = ZYNOS_MODEL_P_2602HW_D1A, + .flash_base = AR7_FLASH_BASE, + .flash_size = 4*1024*1024, + .code_start = 0x94008000, + .romio_offs = 0x20000, + }, + #if 0 /* * Texas Instruments AR7 based boards @@ -193,7 +204,7 @@ static struct board_info boards[] = { .flash_base = AR7_FLASH_BASE, .flash_size = 8*1024*1024, .code_start = 0x94014000, - .fw_offs = 0x40000, + .romio_offs = 0x40000, }, /* @@ -710,7 +721,7 @@ write_out_image(FILE *outfile) offset += padlen; - mmap.addr = board->flash_base + board->fw_offs + offset; + mmap.addr = board->flash_base + board->romio_offs + offset; hdr.mmap_addr = mmap.addr; res = write_out_mmap(outfile, &mmap, &css); if (res) @@ -887,7 +898,7 @@ calc_block_offsets(int type, uint32_t *offset) continue; next_offs = ALIGN(*offset, block->align); - avail = board->flash_size - board->fw_offs - next_offs; + avail = board->flash_size - board->romio_offs - next_offs; if (next_offs + block->file_size > avail) { ERR("file %s is too big, offset = %u, size=%u," " align = %u", block->file_name, @@ -921,7 +932,7 @@ process_blocks(void) return res; } - offset = board->fw_offs + bootext_block->file_size; + offset = board->romio_offs + bootext_block->file_size; res = calc_block_offsets(BLOCK_TYPE_RAW, &offset); return res; diff --git a/src/zynos.h b/src/zynos.h index 7455a79..c8d3250 100644 --- a/src/zynos.h +++ b/src/zynos.h @@ -1,8 +1,8 @@ /* * $Id$ * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos + * Copyright (C) 2007-2008 OpenWrt.org + * Copyright (C) 2007-2008 Gabor Juhos * * This code was based on the information of the ZyXEL's firmware * image format written by Kolja Waschk, can be found at: @@ -152,12 +152,12 @@ struct zyn_mmt_item { #define ZYNOS_MODEL_P_2602HW_61C /* n.a. */ #define ZYNOS_MODEL_P_2602HW_63 /* n.a. */ #define ZYNOS_MODEL_P_2602HW_63C ZYNOS_MODEL_P_2602H_63C -#define ZYNOS_MODEL_P_2602HW_D1A /* n.a. */ +#define ZYNOS_MODEL_P_2602HW_D1A MID( 6301) #define ZYNOS_MODEL_P_2602HW_D3A /* n.a. */ #define ZYNOS_MODEL_P_2602HWL_61 MID( 1181) #define ZYNOS_MODEL_P_2602HWL_61C ZYNOS_MODEL_P_2602H_61C #define ZYNOS_MODEL_P_2602HWL_63C ZYNOS_MODEL_P_2602H_63C -#define ZYNOS_MODEL_P_2602HWL_D1A MID( 6301) +#define ZYNOS_MODEL_P_2602HWL_D1A ZYNOS_MODEL_P_2602HW_D1A #define ZYNOS_MODEL_P_2602HWL_D3A MID( 7581) #define ZYNOS_MODEL_P_2602HWN_D7A MID(30464) #define ZYNOS_MODEL_P_2602HWNLI_D7A MID( 6813) -- 2.30.2