From 755d739534f998d92e348fba8ffb0478416576e7 Mon Sep 17 00:00:00 2001 From: Vardan Mikayelyan Date: Tue, 16 Jan 2018 16:04:24 +0400 Subject: [PATCH] usb: dwc2: Fix dwc2_hsotg_core_init_disconnected() We should call dwc2_hsotg_enqueue_setup() after properly setting lx_state. Because it may cause error-out from dwc2_hsotg_enqueue_setup() due to wrong value in lx_state. Issue can be reproduced by loading driver while connected A-Connector (start in A-HOST mode) then disconnect A-Connector to switch to B-DEVICE. Acked-by: John Youn Signed-off-by: Vardan Mikayelyan Signed-off-by: Grigor Tovmasyan Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/gadget.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index d6222e946463..5bcad1d869b5 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -3381,12 +3381,6 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg, dwc2_writel(dwc2_hsotg_ep0_mps(hsotg->eps_out[0]->ep.maxpacket) | DXEPCTL_USBACTEP, hsotg->regs + DIEPCTL0); - dwc2_hsotg_enqueue_setup(hsotg); - - dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", - dwc2_readl(hsotg->regs + DIEPCTL0), - dwc2_readl(hsotg->regs + DOEPCTL0)); - /* clear global NAKs */ val = DCTL_CGOUTNAK | DCTL_CGNPINNAK; if (!is_usb_reset) @@ -3397,6 +3391,12 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg, mdelay(3); hsotg->lx_state = DWC2_L0; + + dwc2_hsotg_enqueue_setup(hsotg); + + dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", + dwc2_readl(hsotg->regs + DIEPCTL0), + dwc2_readl(hsotg->regs + DOEPCTL0)); } static void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg) -- 2.30.2