From 78827ec071ef4971a89e1da6349f2b73539639c3 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Wed, 23 Jul 2014 19:29:11 +0200 Subject: [PATCH] ARM: dts: imx6qdl-sabresd: add always on pcie regulator Everything in the PCI specification assumes devices to be enumerable on startup. This is only possible if they have power available. A future improvement may allow this regulator to be switched off for D3hot and D3cold power states, but there is a lot of work to do the pcie host controller side for this to work. To keep things simple always enable the regulator for now. Signed-off-by: Lucas Stach Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index ec43dde78525..07fb3020e1bf 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -54,6 +54,19 @@ gpio = <&gpio4 10 0>; enable-active-high; }; + + reg_pcie: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_reg>; + regulator-name = "MPCIE_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 19 0>; + regulator-always-on; + enable-active-high; + }; }; gpio-keys { @@ -400,6 +413,12 @@ >; }; + pinctrl_pcie_reg: pciereggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 -- 2.30.2