From 79849ebc0e06d775f53d160bb1a63b000fa0947b Mon Sep 17 00:00:00 2001 From: David Ertman Date: Tue, 10 Feb 2015 09:10:43 +0000 Subject: [PATCH] e1000e: initial support for i219 i219 is the next-generation LOM that will be available on systems with the Sunrise Point Platform Controller Hub (PCH) chipset from Intel. This patch provides the initial support for the device. Signed-off-by: Dave Ertman Tested-by: Aaron Brown Tested-by: Carmen Edwards Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/defines.h | 1 + drivers/net/ethernet/intel/e1000e/e1000.h | 2 + drivers/net/ethernet/intel/e1000e/ethtool.c | 6 +- drivers/net/ethernet/intel/e1000e/hw.h | 6 + drivers/net/ethernet/intel/e1000e/ich8lan.c | 770 ++++++++++++++++++-- drivers/net/ethernet/intel/e1000e/ich8lan.h | 9 + drivers/net/ethernet/intel/e1000e/netdev.c | 50 +- drivers/net/ethernet/intel/e1000e/ptp.c | 4 +- drivers/net/ethernet/intel/e1000e/regs.h | 3 + 9 files changed, 768 insertions(+), 83 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index bb7ab3c321d6..0570c668ec3d 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -141,6 +141,7 @@ #define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */ #define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */ #define E1000_RCTL_RDMTS_HALF 0x00000000 /* Rx desc min threshold size */ +#define E1000_RCTL_RDMTS_HEX 0x00010000 #define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */ #define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */ #define E1000_RCTL_BAM 0x00008000 /* broadcast enable */ diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 9416e5a7e0c8..a69f09e37b58 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -132,6 +132,7 @@ enum e1000_boards { board_pchlan, board_pch2lan, board_pch_lpt, + board_pch_spt }; struct e1000_ps_page { @@ -501,6 +502,7 @@ extern const struct e1000_info e1000_ich10_info; extern const struct e1000_info e1000_pch_info; extern const struct e1000_info e1000_pch2_info; extern const struct e1000_info e1000_pch_lpt_info; +extern const struct e1000_info e1000_pch_spt_info; extern const struct e1000_info e1000_es2_info; void e1000e_ptp_init(struct e1000_adapter *adapter); diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index 865ce45f9ec3..11f486e4ff7b 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -896,18 +896,20 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) case e1000_pchlan: case e1000_pch2lan: case e1000_pch_lpt: + case e1000_pch_spt: mask |= (1 << 18); break; default: break; } - if (mac->type == e1000_pch_lpt) + if ((mac->type == e1000_pch_lpt) || (mac->type == e1000_pch_spt)) wlock_mac = (er32(FWSM) & E1000_FWSM_WLOCK_MAC_MASK) >> E1000_FWSM_WLOCK_MAC_SHIFT; for (i = 0; i < mac->rar_entry_count; i++) { - if (mac->type == e1000_pch_lpt) { + if ((mac->type == e1000_pch_lpt) || + (mac->type == e1000_pch_spt)) { /* Cannot test write-protected SHRAL[n] registers */ if ((wlock_mac == 1) || (wlock_mac && (i > wlock_mac))) continue; diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index 72f5475c4b90..19e8c487db06 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -87,6 +87,10 @@ struct e1000_hw; #define E1000_DEV_ID_PCH_I218_V2 0x15A1 #define E1000_DEV_ID_PCH_I218_LM3 0x15A2 /* Wildcat Point PCH */ #define E1000_DEV_ID_PCH_I218_V3 0x15A3 /* Wildcat Point PCH */ +#define E1000_DEV_ID_PCH_SPT_I219_LM 0x156F /* SPT PCH */ +#define E1000_DEV_ID_PCH_SPT_I219_V 0x1570 /* SPT PCH */ +#define E1000_DEV_ID_PCH_SPT_I219_LM2 0x15B7 /* SPT-H PCH */ +#define E1000_DEV_ID_PCH_SPT_I219_V2 0x15B8 /* SPT-H PCH */ #define E1000_REVISION_4 4 @@ -108,6 +112,7 @@ enum e1000_mac_type { e1000_pchlan, e1000_pch2lan, e1000_pch_lpt, + e1000_pch_spt, }; enum e1000_media_type { @@ -153,6 +158,7 @@ enum e1000_bus_width { e1000_bus_width_pcie_x1, e1000_bus_width_pcie_x2, e1000_bus_width_pcie_x4 = 4, + e1000_bus_width_pcie_x8 = 8, e1000_bus_width_32, e1000_bus_width_64, e1000_bus_width_reserved diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 48b74a549155..7523f510c7e4 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -123,6 +123,14 @@ static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset, u16 *data); static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, u8 size, u16 *data); +static s32 e1000_read_flash_data32_ich8lan(struct e1000_hw *hw, u32 offset, + u32 *data); +static s32 e1000_read_flash_dword_ich8lan(struct e1000_hw *hw, + u32 offset, u32 *data); +static s32 e1000_write_flash_data32_ich8lan(struct e1000_hw *hw, + u32 offset, u32 data); +static s32 e1000_retry_write_flash_dword_ich8lan(struct e1000_hw *hw, + u32 offset, u32 dword); static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw); static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw); static s32 e1000_led_on_ich8lan(struct e1000_hw *hw); @@ -229,7 +237,8 @@ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw) if (ret_val) return false; out: - if (hw->mac.type == e1000_pch_lpt) { + if ((hw->mac.type == e1000_pch_lpt) || + (hw->mac.type == e1000_pch_spt)) { /* Unforce SMBus mode in PHY */ e1e_rphy_locked(hw, CV_SMB_CTRL, &phy_reg); phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS; @@ -321,6 +330,7 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) */ switch (hw->mac.type) { case e1000_pch_lpt: + case e1000_pch_spt: if (e1000_phy_is_accessible_pchlan(hw)) break; @@ -461,6 +471,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) /* fall-through */ case e1000_pch2lan: case e1000_pch_lpt: + case e1000_pch_spt: /* In case the PHY needs to be in mdio slow mode, * set slow mode and try to get the PHY id again. */ @@ -590,35 +601,50 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw) struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; u32 gfpreg, sector_base_addr, sector_end_addr; u16 i; + u32 nvm_size; /* Can't read flash registers if the register set isn't mapped. */ - if (!hw->flash_address) { - e_dbg("ERROR: Flash registers not mapped\n"); - return -E1000_ERR_CONFIG; - } - nvm->type = e1000_nvm_flash_sw; + /* in SPT, gfpreg doesn't exist. NVM size is taken from the + * STRAP register + */ + if (hw->mac.type == e1000_pch_spt) { + nvm->flash_base_addr = 0; + nvm_size = (((er32(STRAP) >> 1) & 0x1F) + 1) + * NVM_SIZE_MULTIPLIER; + nvm->flash_bank_size = nvm_size / 2; + /* Adjust to word count */ + nvm->flash_bank_size /= sizeof(u16); + /* Set the base address for flash register access */ + hw->flash_address = hw->hw_addr + E1000_FLASH_BASE_ADDR; + } else { + if (!hw->flash_address) { + e_dbg("ERROR: Flash registers not mapped\n"); + return -E1000_ERR_CONFIG; + } - gfpreg = er32flash(ICH_FLASH_GFPREG); + gfpreg = er32flash(ICH_FLASH_GFPREG); - /* sector_X_addr is a "sector"-aligned address (4096 bytes) - * Add 1 to sector_end_addr since this sector is included in - * the overall size. - */ - sector_base_addr = gfpreg & FLASH_GFPREG_BASE_MASK; - sector_end_addr = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK) + 1; + /* sector_X_addr is a "sector"-aligned address (4096 bytes) + * Add 1 to sector_end_addr since this sector is included in + * the overall size. + */ + sector_base_addr = gfpreg & FLASH_GFPREG_BASE_MASK; + sector_end_addr = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK) + 1; - /* flash_base_addr is byte-aligned */ - nvm->flash_base_addr = sector_base_addr << FLASH_SECTOR_ADDR_SHIFT; + /* flash_base_addr is byte-aligned */ + nvm->flash_base_addr = sector_base_addr + << FLASH_SECTOR_ADDR_SHIFT; - /* find total size of the NVM, then cut in half since the total - * size represents two separate NVM banks. - */ - nvm->flash_bank_size = ((sector_end_addr - sector_base_addr) - << FLASH_SECTOR_ADDR_SHIFT); - nvm->flash_bank_size /= 2; - /* Adjust to word count */ - nvm->flash_bank_size /= sizeof(u16); + /* find total size of the NVM, then cut in half since the total + * size represents two separate NVM banks. + */ + nvm->flash_bank_size = ((sector_end_addr - sector_base_addr) + << FLASH_SECTOR_ADDR_SHIFT); + nvm->flash_bank_size /= 2; + /* Adjust to word count */ + nvm->flash_bank_size /= sizeof(u16); + } nvm->word_size = E1000_ICH8_SHADOW_RAM_WORDS; @@ -682,6 +708,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw) mac->ops.rar_set = e1000_rar_set_pch2lan; /* fall-through */ case e1000_pch_lpt: + case e1000_pch_spt: case e1000_pchlan: /* check management mode */ mac->ops.check_mng_mode = e1000_check_mng_mode_pchlan; @@ -699,7 +726,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw) break; } - if (mac->type == e1000_pch_lpt) { + if ((mac->type == e1000_pch_lpt) || (mac->type == e1000_pch_spt)) { mac->rar_entry_count = E1000_PCH_LPT_RAR_ENTRIES; mac->ops.rar_set = e1000_rar_set_pch_lpt; mac->ops.setup_physical_interface = @@ -919,8 +946,9 @@ release: /* clear FEXTNVM6 bit 8 on link down or 10/100 */ fextnvm6 &= ~E1000_FEXTNVM6_REQ_PLL_CLK; - if (!link || ((status & E1000_STATUS_SPEED_100) && - (status & E1000_STATUS_FD))) + if ((hw->phy.revision > 5) || !link || + ((status & E1000_STATUS_SPEED_100) && + (status & E1000_STATUS_FD))) goto update_fextnvm6; ret_val = e1e_rphy(hw, I217_INBAND_CTRL, ®); @@ -1100,6 +1128,21 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) if (ret_val) goto out; + /* Si workaround for ULP entry flow on i127/rev6 h/w. Enable + * LPLU and disable Gig speed when entering ULP + */ + if ((hw->phy.type == e1000_phy_i217) && (hw->phy.revision == 6)) { + ret_val = e1000_read_phy_reg_hv_locked(hw, HV_OEM_BITS, + &phy_reg); + if (ret_val) + goto release; + phy_reg |= HV_OEM_BITS_LPLU | HV_OEM_BITS_GBE_DIS; + ret_val = e1000_write_phy_reg_hv_locked(hw, HV_OEM_BITS, + phy_reg); + if (ret_val) + goto release; + } + /* Force SMBus mode in PHY */ ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg); if (ret_val) @@ -1302,7 +1345,8 @@ out: static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) { struct e1000_mac_info *mac = &hw->mac; - s32 ret_val; + s32 ret_val, tipg_reg = 0; + u16 emi_addr, emi_val = 0; bool link; u16 phy_reg; @@ -1333,48 +1377,55 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) * the IPG and reduce Rx latency in the PHY. */ if (((hw->mac.type == e1000_pch2lan) || - (hw->mac.type == e1000_pch_lpt)) && link) { + (hw->mac.type == e1000_pch_lpt) || + (hw->mac.type == e1000_pch_spt)) && link) { u32 reg; reg = er32(STATUS); + tipg_reg = er32(TIPG); + tipg_reg &= ~E1000_TIPG_IPGT_MASK; + if (!(reg & (E1000_STATUS_FD | E1000_STATUS_SPEED_MASK))) { - u16 emi_addr; + tipg_reg |= 0xFF; + /* Reduce Rx latency in analog PHY */ + emi_val = 0; + } else { - reg = er32(TIPG); - reg &= ~E1000_TIPG_IPGT_MASK; - reg |= 0xFF; - ew32(TIPG, reg); + /* Roll back the default values */ + tipg_reg |= 0x08; + emi_val = 1; + } - /* Reduce Rx latency in analog PHY */ - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - return ret_val; + ew32(TIPG, tipg_reg); - if (hw->mac.type == e1000_pch2lan) - emi_addr = I82579_RX_CONFIG; - else - emi_addr = I217_RX_CONFIG; + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; - ret_val = e1000_write_emi_reg_locked(hw, emi_addr, 0); + if (hw->mac.type == e1000_pch2lan) + emi_addr = I82579_RX_CONFIG; + else + emi_addr = I217_RX_CONFIG; + ret_val = e1000_write_emi_reg_locked(hw, emi_addr, emi_val); - hw->phy.ops.release(hw); + hw->phy.ops.release(hw); - if (ret_val) - return ret_val; - } + if (ret_val) + return ret_val; } /* Work-around I218 hang issue */ if ((hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_LM) || (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V) || (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM3) || - (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V3)) { + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V3) || + (hw->mac.type == e1000_pch_spt)) { ret_val = e1000_k1_workaround_lpt_lp(hw, link); if (ret_val) return ret_val; } - - if (hw->mac.type == e1000_pch_lpt) { + if ((hw->mac.type == e1000_pch_lpt) || + (hw->mac.type == e1000_pch_spt)) { /* Set platform power management values for * Latency Tolerance Reporting (LTR) */ @@ -1386,6 +1437,19 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) /* Clear link partner's EEE ability */ hw->dev_spec.ich8lan.eee_lp_ability = 0; + /* FEXTNVM6 K1-off workaround */ + if (hw->mac.type == e1000_pch_spt) { + u32 pcieanacfg = er32(PCIEANACFG); + u32 fextnvm6 = er32(FEXTNVM6); + + if (pcieanacfg & E1000_FEXTNVM6_K1_OFF_ENABLE) + fextnvm6 |= E1000_FEXTNVM6_K1_OFF_ENABLE; + else + fextnvm6 &= ~E1000_FEXTNVM6_K1_OFF_ENABLE; + + ew32(FEXTNVM6, fextnvm6); + } + if (!link) return 0; /* No link detected */ @@ -1479,6 +1543,7 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) case e1000_pchlan: case e1000_pch2lan: case e1000_pch_lpt: + case e1000_pch_spt: rc = e1000_init_phy_params_pchlan(hw); break; default: @@ -1929,6 +1994,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) case e1000_pchlan: case e1000_pch2lan: case e1000_pch_lpt: + case e1000_pch_spt: sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M; break; default: @@ -2961,6 +3027,20 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank) s32 ret_val; switch (hw->mac.type) { + /* In SPT, read from the CTRL_EXT reg instead of + * accessing the sector valid bits from the nvm + */ + case e1000_pch_spt: + *bank = er32(CTRL_EXT) + & E1000_CTRL_EXT_NVMVS; + if ((*bank == 0) || (*bank == 1)) { + e_dbg("ERROR: No valid NVM bank present\n"); + return -E1000_ERR_NVM; + } else { + *bank = *bank - 2; + return 0; + } + break; case e1000_ich8lan: case e1000_ich9lan: eecd = er32(EECD); @@ -3007,6 +3087,99 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank) } } +/** + * e1000_read_nvm_spt - NVM access for SPT + * @hw: pointer to the HW structure + * @offset: The offset (in bytes) of the word(s) to read. + * @words: Size of data to read in words. + * @data: pointer to the word(s) to read at offset. + * + * Reads a word(s) from the NVM + **/ +static s32 e1000_read_nvm_spt(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; + u32 act_offset; + s32 ret_val = 0; + u32 bank = 0; + u32 dword = 0; + u16 offset_to_read; + u16 i; + + if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) || + (words == 0)) { + e_dbg("nvm parameter(s) out of bounds\n"); + ret_val = -E1000_ERR_NVM; + goto out; + } + + nvm->ops.acquire(hw); + + ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); + if (ret_val) { + e_dbg("Could not detect valid bank, assuming bank 0\n"); + bank = 0; + } + + act_offset = (bank) ? nvm->flash_bank_size : 0; + act_offset += offset; + + ret_val = 0; + + for (i = 0; i < words; i += 2) { + if (words - i == 1) { + if (dev_spec->shadow_ram[offset + i].modified) { + data[i] = + dev_spec->shadow_ram[offset + i].value; + } else { + offset_to_read = act_offset + i - + ((act_offset + i) % 2); + ret_val = + e1000_read_flash_dword_ich8lan(hw, + offset_to_read, + &dword); + if (ret_val) + break; + if ((act_offset + i) % 2 == 0) + data[i] = (u16)(dword & 0xFFFF); + else + data[i] = (u16)((dword >> 16) & 0xFFFF); + } + } else { + offset_to_read = act_offset + i; + if (!(dev_spec->shadow_ram[offset + i].modified) || + !(dev_spec->shadow_ram[offset + i + 1].modified)) { + ret_val = + e1000_read_flash_dword_ich8lan(hw, + offset_to_read, + &dword); + if (ret_val) + break; + } + if (dev_spec->shadow_ram[offset + i].modified) + data[i] = + dev_spec->shadow_ram[offset + i].value; + else + data[i] = (u16)(dword & 0xFFFF); + if (dev_spec->shadow_ram[offset + i].modified) + data[i + 1] = + dev_spec->shadow_ram[offset + i + 1].value; + else + data[i + 1] = (u16)(dword >> 16 & 0xFFFF); + } + } + + nvm->ops.release(hw); + +out: + if (ret_val) + e_dbg("NVM read error: %d\n", ret_val); + + return ret_val; +} + /** * e1000_read_nvm_ich8lan - Read word(s) from the NVM * @hw: pointer to the HW structure @@ -3090,8 +3263,10 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) /* Clear FCERR and DAEL in hw status by writing 1 */ hsfsts.hsf_status.flcerr = 1; hsfsts.hsf_status.dael = 1; - - ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval); + if (hw->mac.type == e1000_pch_spt) + ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval & 0xFFFF); + else + ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval); /* Either we should have a hardware SPI cycle in progress * bit to check against, in order to start a new cycle or @@ -3107,7 +3282,10 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) * Begin by setting Flash Cycle Done. */ hsfsts.hsf_status.flcdone = 1; - ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval); + if (hw->mac.type == e1000_pch_spt) + ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval & 0xFFFF); + else + ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval); ret_val = 0; } else { s32 i; @@ -3128,7 +3306,11 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) * now set the Flash Cycle Done. */ hsfsts.hsf_status.flcdone = 1; - ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval); + if (hw->mac.type == e1000_pch_spt) + ew32flash(ICH_FLASH_HSFSTS, + hsfsts.regval & 0xFFFF); + else + ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval); } else { e_dbg("Flash controller busy, cannot get access\n"); } @@ -3151,9 +3333,16 @@ static s32 e1000_flash_cycle_ich8lan(struct e1000_hw *hw, u32 timeout) u32 i = 0; /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */ - hsflctl.regval = er16flash(ICH_FLASH_HSFCTL); + if (hw->mac.type == e1000_pch_spt) + hsflctl.regval = er32flash(ICH_FLASH_HSFSTS) >> 16; + else + hsflctl.regval = er16flash(ICH_FLASH_HSFCTL); hsflctl.hsf_ctrl.flcgo = 1; - ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval); + + if (hw->mac.type == e1000_pch_spt) + ew32flash(ICH_FLASH_HSFSTS, hsflctl.regval << 16); + else + ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval); /* wait till FDONE bit is set to 1 */ do { @@ -3169,6 +3358,23 @@ static s32 e1000_flash_cycle_ich8lan(struct e1000_hw *hw, u32 timeout) return -E1000_ERR_NVM; } +/** + * e1000_read_flash_dword_ich8lan - Read dword from flash + * @hw: pointer to the HW structure + * @offset: offset to data location + * @data: pointer to the location for storing the data + * + * Reads the flash dword at offset into data. Offset is converted + * to bytes before read. + **/ +static s32 e1000_read_flash_dword_ich8lan(struct e1000_hw *hw, u32 offset, + u32 *data) +{ + /* Must convert word offset into bytes. */ + offset <<= 1; + return e1000_read_flash_data32_ich8lan(hw, offset, data); +} + /** * e1000_read_flash_word_ich8lan - Read word from flash * @hw: pointer to the HW structure @@ -3201,7 +3407,14 @@ static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset, s32 ret_val; u16 word = 0; - ret_val = e1000_read_flash_data_ich8lan(hw, offset, 1, &word); + /* In SPT, only 32 bits access is supported, + * so this function should not be called. + */ + if (hw->mac.type == e1000_pch_spt) + return -E1000_ERR_NVM; + else + ret_val = e1000_read_flash_data_ich8lan(hw, offset, 1, &word); + if (ret_val) return ret_val; @@ -3286,6 +3499,82 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, return ret_val; } +/** + * e1000_read_flash_data32_ich8lan - Read dword from NVM + * @hw: pointer to the HW structure + * @offset: The offset (in bytes) of the dword to read. + * @data: Pointer to the dword to store the value read. + * + * Reads a byte or word from the NVM using the flash access registers. + **/ + +static s32 e1000_read_flash_data32_ich8lan(struct e1000_hw *hw, u32 offset, + u32 *data) +{ + union ich8_hws_flash_status hsfsts; + union ich8_hws_flash_ctrl hsflctl; + u32 flash_linear_addr; + s32 ret_val = -E1000_ERR_NVM; + u8 count = 0; + + if (offset > ICH_FLASH_LINEAR_ADDR_MASK || + hw->mac.type != e1000_pch_spt) + return -E1000_ERR_NVM; + flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) + + hw->nvm.flash_base_addr); + + do { + udelay(1); + /* Steps */ + ret_val = e1000_flash_cycle_init_ich8lan(hw); + if (ret_val) + break; + /* In SPT, This register is in Lan memory space, not flash. + * Therefore, only 32 bit access is supported + */ + hsflctl.regval = er32flash(ICH_FLASH_HSFSTS) >> 16; + + /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ + hsflctl.hsf_ctrl.fldbcount = sizeof(u32) - 1; + hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ; + /* In SPT, This register is in Lan memory space, not flash. + * Therefore, only 32 bit access is supported + */ + ew32flash(ICH_FLASH_HSFSTS, (u32)hsflctl.regval << 16); + ew32flash(ICH_FLASH_FADDR, flash_linear_addr); + + ret_val = + e1000_flash_cycle_ich8lan(hw, + ICH_FLASH_READ_COMMAND_TIMEOUT); + + /* Check if FCERR is set to 1, if set to 1, clear it + * and try the whole sequence a few more times, else + * read in (shift in) the Flash Data0, the order is + * least significant byte first msb to lsb + */ + if (!ret_val) { + *data = er32flash(ICH_FLASH_FDATA0); + break; + } else { + /* If we've gotten here, then things are probably + * completely hosed, but if the error condition is + * detected, it won't hurt to give it another try... + * ICH_FLASH_CYCLE_REPEAT_COUNT times. + */ + hsfsts.regval = er16flash(ICH_FLASH_HSFSTS); + if (hsfsts.hsf_status.flcerr) { + /* Repeat for some time before giving up. */ + continue; + } else if (!hsfsts.hsf_status.flcdone) { + e_dbg("Timeout error - flash cycle did not complete.\n"); + break; + } + } + } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT); + + return ret_val; +} + /** * e1000_write_nvm_ich8lan - Write word(s) to the NVM * @hw: pointer to the HW structure @@ -3321,7 +3610,7 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, } /** - * e1000_update_nvm_checksum_ich8lan - Update the checksum for NVM + * e1000_update_nvm_checksum_spt - Update the checksum for NVM * @hw: pointer to the HW structure * * The NVM checksum is updated by calling the generic update_nvm_checksum, @@ -3331,13 +3620,13 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, * After a successful commit, the shadow ram is cleared and is ready for * future writes. **/ -static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) +static s32 e1000_update_nvm_checksum_spt(struct e1000_hw *hw) { struct e1000_nvm_info *nvm = &hw->nvm; struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; u32 i, act_offset, new_bank_offset, old_bank_offset, bank; s32 ret_val; - u16 data; + u32 dword = 0; ret_val = e1000e_update_nvm_checksum_generic(hw); if (ret_val) @@ -3371,12 +3660,175 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) if (ret_val) goto release; } - - for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) { + for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i += 2) { /* Determine whether to write the value stored * in the other NVM bank or a modified value stored * in the shadow RAM */ + ret_val = e1000_read_flash_dword_ich8lan(hw, + i + old_bank_offset, + &dword); + + if (dev_spec->shadow_ram[i].modified) { + dword &= 0xffff0000; + dword |= (dev_spec->shadow_ram[i].value & 0xffff); + } + if (dev_spec->shadow_ram[i + 1].modified) { + dword &= 0x0000ffff; + dword |= ((dev_spec->shadow_ram[i + 1].value & 0xffff) + << 16); + } + if (ret_val) + break; + + /* If the word is 0x13, then make sure the signature bits + * (15:14) are 11b until the commit has completed. + * This will allow us to write 10b which indicates the + * signature is valid. We want to do this after the write + * has completed so that we don't mark the segment valid + * while the write is still in progress + */ + if (i == E1000_ICH_NVM_SIG_WORD - 1) + dword |= E1000_ICH_NVM_SIG_MASK << 16; + + /* Convert offset to bytes. */ + act_offset = (i + new_bank_offset) << 1; + + usleep_range(100, 200); + + /* Write the data to the new bank. Offset in words */ + act_offset = i + new_bank_offset; + ret_val = e1000_retry_write_flash_dword_ich8lan(hw, act_offset, + dword); + if (ret_val) + break; + } + + /* Don't bother writing the segment valid bits if sector + * programming failed. + */ + if (ret_val) { + /* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */ + e_dbg("Flash commit failed.\n"); + goto release; + } + + /* Finally validate the new segment by setting bit 15:14 + * to 10b in word 0x13 , this can be done without an + * erase as well since these bits are 11 to start with + * and we need to change bit 14 to 0b + */ + act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD; + + /*offset in words but we read dword */ + --act_offset; + ret_val = e1000_read_flash_dword_ich8lan(hw, act_offset, &dword); + + if (ret_val) + goto release; + + dword &= 0xBFFFFFFF; + ret_val = e1000_retry_write_flash_dword_ich8lan(hw, act_offset, dword); + + if (ret_val) + goto release; + + /* And invalidate the previously valid segment by setting + * its signature word (0x13) high_byte to 0b. This can be + * done without an erase because flash erase sets all bits + * to 1's. We can write 1's to 0's without an erase + */ + act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1; + + /* offset in words but we read dword */ + act_offset = old_bank_offset + E1000_ICH_NVM_SIG_WORD - 1; + ret_val = e1000_read_flash_dword_ich8lan(hw, act_offset, &dword); + + if (ret_val) + goto release; + + dword &= 0x00FFFFFF; + ret_val = e1000_retry_write_flash_dword_ich8lan(hw, act_offset, dword); + + if (ret_val) + goto release; + + /* Great! Everything worked, we can now clear the cached entries. */ + for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) { + dev_spec->shadow_ram[i].modified = false; + dev_spec->shadow_ram[i].value = 0xFFFF; + } + +release: + nvm->ops.release(hw); + + /* Reload the EEPROM, or else modifications will not appear + * until after the next adapter reset. + */ + if (!ret_val) { + nvm->ops.reload(hw); + usleep_range(10000, 20000); + } + +out: + if (ret_val) + e_dbg("NVM update error: %d\n", ret_val); + + return ret_val; +} + +/** + * e1000_update_nvm_checksum_ich8lan - Update the checksum for NVM + * @hw: pointer to the HW structure + * + * The NVM checksum is updated by calling the generic update_nvm_checksum, + * which writes the checksum to the shadow ram. The changes in the shadow + * ram are then committed to the EEPROM by processing each bank at a time + * checking for the modified bit and writing only the pending changes. + * After a successful commit, the shadow ram is cleared and is ready for + * future writes. + **/ +static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; + u32 i, act_offset, new_bank_offset, old_bank_offset, bank; + s32 ret_val; + u16 data = 0; + + ret_val = e1000e_update_nvm_checksum_generic(hw); + if (ret_val) + goto out; + + if (nvm->type != e1000_nvm_flash_sw) + goto out; + + nvm->ops.acquire(hw); + + /* We're writing to the opposite bank so if we're on bank 1, + * write to bank 0 etc. We also need to erase the segment that + * is going to be written + */ + ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); + if (ret_val) { + e_dbg("Could not detect valid bank, assuming bank 0\n"); + bank = 0; + } + + if (bank == 0) { + new_bank_offset = nvm->flash_bank_size; + old_bank_offset = 0; + ret_val = e1000_erase_flash_bank_ich8lan(hw, 1); + if (ret_val) + goto release; + } else { + old_bank_offset = nvm->flash_bank_size; + new_bank_offset = 0; + ret_val = e1000_erase_flash_bank_ich8lan(hw, 0); + if (ret_val) + goto release; + } + for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) { if (dev_spec->shadow_ram[i].modified) { data = dev_spec->shadow_ram[i].value; } else { @@ -3498,6 +3950,7 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw) */ switch (hw->mac.type) { case e1000_pch_lpt: + case e1000_pch_spt: word = NVM_COMPAT; valid_csum_mask = NVM_COMPAT_VALID_CSUM; break; @@ -3583,9 +4036,13 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, s32 ret_val; u8 count = 0; - if (size < 1 || size > 2 || data > size * 0xff || - offset > ICH_FLASH_LINEAR_ADDR_MASK) - return -E1000_ERR_NVM; + if (hw->mac.type == e1000_pch_spt) { + if (size != 4 || offset > ICH_FLASH_LINEAR_ADDR_MASK) + return -E1000_ERR_NVM; + } else { + if (size < 1 || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK) + return -E1000_ERR_NVM; + } flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) + hw->nvm.flash_base_addr); @@ -3596,12 +4053,25 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, ret_val = e1000_flash_cycle_init_ich8lan(hw); if (ret_val) break; + /* In SPT, This register is in Lan memory space, not + * flash. Therefore, only 32 bit access is supported + */ + if (hw->mac.type == e1000_pch_spt) + hsflctl.regval = er32flash(ICH_FLASH_HSFSTS) >> 16; + else + hsflctl.regval = er16flash(ICH_FLASH_HSFCTL); - hsflctl.regval = er16flash(ICH_FLASH_HSFCTL); /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ hsflctl.hsf_ctrl.fldbcount = size - 1; hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE; - ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval); + /* In SPT, This register is in Lan memory space, + * not flash. Therefore, only 32 bit access is + * supported + */ + if (hw->mac.type == e1000_pch_spt) + ew32flash(ICH_FLASH_HSFSTS, hsflctl.regval << 16); + else + ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval); ew32flash(ICH_FLASH_FADDR, flash_linear_addr); @@ -3639,6 +4109,90 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, return ret_val; } +/** +* e1000_write_flash_data32_ich8lan - Writes 4 bytes to the NVM +* @hw: pointer to the HW structure +* @offset: The offset (in bytes) of the dwords to read. +* @data: The 4 bytes to write to the NVM. +* +* Writes one/two/four bytes to the NVM using the flash access registers. +**/ +static s32 e1000_write_flash_data32_ich8lan(struct e1000_hw *hw, u32 offset, + u32 data) +{ + union ich8_hws_flash_status hsfsts; + union ich8_hws_flash_ctrl hsflctl; + u32 flash_linear_addr; + s32 ret_val; + u8 count = 0; + + if (hw->mac.type == e1000_pch_spt) { + if (offset > ICH_FLASH_LINEAR_ADDR_MASK) + return -E1000_ERR_NVM; + } + flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) + + hw->nvm.flash_base_addr); + do { + udelay(1); + /* Steps */ + ret_val = e1000_flash_cycle_init_ich8lan(hw); + if (ret_val) + break; + + /* In SPT, This register is in Lan memory space, not + * flash. Therefore, only 32 bit access is supported + */ + if (hw->mac.type == e1000_pch_spt) + hsflctl.regval = er32flash(ICH_FLASH_HSFSTS) + >> 16; + else + hsflctl.regval = er16flash(ICH_FLASH_HSFCTL); + + hsflctl.hsf_ctrl.fldbcount = sizeof(u32) - 1; + hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE; + + /* In SPT, This register is in Lan memory space, + * not flash. Therefore, only 32 bit access is + * supported + */ + if (hw->mac.type == e1000_pch_spt) + ew32flash(ICH_FLASH_HSFSTS, hsflctl.regval << 16); + else + ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval); + + ew32flash(ICH_FLASH_FADDR, flash_linear_addr); + + ew32flash(ICH_FLASH_FDATA0, data); + + /* check if FCERR is set to 1 , if set to 1, clear it + * and try the whole sequence a few more times else done + */ + ret_val = + e1000_flash_cycle_ich8lan(hw, + ICH_FLASH_WRITE_COMMAND_TIMEOUT); + + if (!ret_val) + break; + + /* If we're here, then things are most likely + * completely hosed, but if the error condition + * is detected, it won't hurt to give it another + * try...ICH_FLASH_CYCLE_REPEAT_COUNT times. + */ + hsfsts.regval = er16flash(ICH_FLASH_HSFSTS); + + if (hsfsts.hsf_status.flcerr) + /* Repeat for some time before giving up. */ + continue; + if (!hsfsts.hsf_status.flcdone) { + e_dbg("Timeout error - flash cycle did not complete.\n"); + break; + } + } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT); + + return ret_val; +} + /** * e1000_write_flash_byte_ich8lan - Write a single byte to NVM * @hw: pointer to the HW structure @@ -3655,6 +4209,40 @@ static s32 e1000_write_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset, return e1000_write_flash_data_ich8lan(hw, offset, 1, word); } +/** +* e1000_retry_write_flash_dword_ich8lan - Writes a dword to NVM +* @hw: pointer to the HW structure +* @offset: The offset of the word to write. +* @dword: The dword to write to the NVM. +* +* Writes a single dword to the NVM using the flash access registers. +* Goes through a retry algorithm before giving up. +**/ +static s32 e1000_retry_write_flash_dword_ich8lan(struct e1000_hw *hw, + u32 offset, u32 dword) +{ + s32 ret_val; + u16 program_retries; + + /* Must convert word offset into bytes. */ + offset <<= 1; + ret_val = e1000_write_flash_data32_ich8lan(hw, offset, dword); + + if (!ret_val) + return ret_val; + for (program_retries = 0; program_retries < 100; program_retries++) { + e_dbg("Retrying Byte %8.8X at offset %u\n", dword, offset); + usleep_range(100, 200); + ret_val = e1000_write_flash_data32_ich8lan(hw, offset, dword); + if (!ret_val) + break; + } + if (program_retries == 100) + return -E1000_ERR_NVM; + + return 0; +} + /** * e1000_retry_write_flash_byte_ich8lan - Writes a single byte to NVM * @hw: pointer to the HW structure @@ -3759,9 +4347,18 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank) /* Write a value 11 (block Erase) in Flash * Cycle field in hw flash control */ - hsflctl.regval = er16flash(ICH_FLASH_HSFCTL); + if (hw->mac.type == e1000_pch_spt) + hsflctl.regval = + er32flash(ICH_FLASH_HSFSTS) >> 16; + else + hsflctl.regval = er16flash(ICH_FLASH_HSFCTL); + hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_ERASE; - ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval); + if (hw->mac.type == e1000_pch_spt) + ew32flash(ICH_FLASH_HSFSTS, + hsflctl.regval << 16); + else + ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval); /* Write the last 24 bits of an index within the * block into Flash Linear address field in Flash @@ -4180,7 +4777,8 @@ static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw) ew32(RFCTL, reg); /* Enable ECC on Lynxpoint */ - if (hw->mac.type == e1000_pch_lpt) { + if ((hw->mac.type == e1000_pch_lpt) || + (hw->mac.type == e1000_pch_spt)) { reg = er32(PBECCSTS); reg |= E1000_PBECCSTS_ECC_ENABLE; ew32(PBECCSTS, reg); @@ -4583,7 +5181,8 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) if ((device_id == E1000_DEV_ID_PCH_LPTLP_I218_LM) || (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V) || (device_id == E1000_DEV_ID_PCH_I218_LM3) || - (device_id == E1000_DEV_ID_PCH_I218_V3)) { + (device_id == E1000_DEV_ID_PCH_I218_V3) || + (hw->mac.type == e1000_pch_spt)) { u32 fextnvm6 = er32(FEXTNVM6); ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK); @@ -5058,6 +5657,17 @@ static const struct e1000_nvm_operations ich8_nvm_ops = { .write = e1000_write_nvm_ich8lan, }; +static const struct e1000_nvm_operations spt_nvm_ops = { + .acquire = e1000_acquire_nvm_ich8lan, + .release = e1000_release_nvm_ich8lan, + .read = e1000_read_nvm_spt, + .update = e1000_update_nvm_checksum_spt, + .reload = e1000e_reload_nvm_generic, + .valid_led_default = e1000_valid_led_default_ich8lan, + .validate = e1000_validate_nvm_checksum_ich8lan, + .write = e1000_write_nvm_ich8lan, +}; + const struct e1000_info e1000_ich8_info = { .mac = e1000_ich8lan, .flags = FLAG_HAS_WOL @@ -5166,3 +5776,23 @@ const struct e1000_info e1000_pch_lpt_info = { .phy_ops = &ich8_phy_ops, .nvm_ops = &ich8_nvm_ops, }; + +const struct e1000_info e1000_pch_spt_info = { + .mac = e1000_pch_spt, + .flags = FLAG_IS_ICH + | FLAG_HAS_WOL + | FLAG_HAS_HW_TIMESTAMP + | FLAG_HAS_CTRLEXT_ON_LOAD + | FLAG_HAS_AMT + | FLAG_HAS_FLASH + | FLAG_HAS_JUMBO_FRAMES + | FLAG_APME_IN_WUC, + .flags2 = FLAG2_HAS_PHY_STATS + | FLAG2_HAS_EEE, + .pba = 26, + .max_hw_frame_size = 9018, + .get_variants = e1000_get_variants_ich8lan, + .mac_ops = &ich8_mac_ops, + .phy_ops = &ich8_phy_ops, + .nvm_ops = &spt_nvm_ops, +}; diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h index 8066a498eaac..770a573b9eea 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.h +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h @@ -95,9 +95,18 @@ #define E1000_FEXTNVM6_REQ_PLL_CLK 0x00000100 #define E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION 0x00000200 +#define E1000_FEXTNVM6_K1_OFF_ENABLE 0x80000000 +/* bit for disabling packet buffer read */ +#define E1000_FEXTNVM7_DISABLE_PB_READ 0x00040000 #define E1000_FEXTNVM7_DISABLE_SMB_PERST 0x00000020 +#define K1_ENTRY_LATENCY 0 +#define K1_MIN_TIME 1 +#define NVM_SIZE_MULTIPLIER 4096 /*multiplier for NVMS field */ +#define E1000_FLASH_BASE_ADDR 0xE000 /*offset of NVM access regs */ +#define E1000_CTRL_EXT_NVMVS 0x3 /*NVM valid sector */ + #define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL #define E1000_ICH_RAR_ENTRIES 7 diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 1e8c40fd5c3d..6fa4fc05709e 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -70,6 +70,7 @@ static const struct e1000_info *e1000_info_tbl[] = { [board_pchlan] = &e1000_pch_info, [board_pch2lan] = &e1000_pch2_info, [board_pch_lpt] = &e1000_pch_lpt_info, + [board_pch_spt] = &e1000_pch_spt_info, }; struct e1000_reg_info { @@ -1796,7 +1797,8 @@ static irqreturn_t e1000_intr_msi(int __always_unused irq, void *data) } /* Reset on uncorrectable ECC error */ - if ((icr & E1000_ICR_ECCER) && (hw->mac.type == e1000_pch_lpt)) { + if ((icr & E1000_ICR_ECCER) && ((hw->mac.type == e1000_pch_lpt) || + (hw->mac.type == e1000_pch_spt))) { u32 pbeccsts = er32(PBECCSTS); adapter->corr_errors += @@ -1876,7 +1878,8 @@ static irqreturn_t e1000_intr(int __always_unused irq, void *data) } /* Reset on uncorrectable ECC error */ - if ((icr & E1000_ICR_ECCER) && (hw->mac.type == e1000_pch_lpt)) { + if ((icr & E1000_ICR_ECCER) && ((hw->mac.type == e1000_pch_lpt) || + (hw->mac.type == e1000_pch_spt))) { u32 pbeccsts = er32(PBECCSTS); adapter->corr_errors += @@ -2257,7 +2260,8 @@ static void e1000_irq_enable(struct e1000_adapter *adapter) if (adapter->msix_entries) { ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574); ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC); - } else if (hw->mac.type == e1000_pch_lpt) { + } else if ((hw->mac.type == e1000_pch_lpt) || + (hw->mac.type == e1000_pch_spt)) { ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER); } else { ew32(IMS, IMS_ENABLE_MASK); @@ -3014,6 +3018,19 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) ew32(TCTL, tctl); hw->mac.ops.config_collision_dist(hw); + + /* SPT Si errata workaround to avoid data corruption */ + if (hw->mac.type == e1000_pch_spt) { + u32 reg_val; + + reg_val = er32(IOSFPC); + reg_val |= E1000_RCTL_RDMTS_HEX; + ew32(IOSFPC, reg_val); + + reg_val = er32(TARC(0)); + reg_val |= E1000_TARC0_CB_MULTIQ_3_REQ; + ew32(TARC(0), reg_val); + } } /** @@ -3490,8 +3507,11 @@ s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca) struct e1000_hw *hw = &adapter->hw; u32 incvalue, incperiod, shift; - /* Make sure clock is enabled on I217 before checking the frequency */ - if ((hw->mac.type == e1000_pch_lpt) && + /* Make sure clock is enabled on I217/I218/I219 before checking + * the frequency + */ + if (((hw->mac.type == e1000_pch_lpt) || + (hw->mac.type == e1000_pch_spt)) && !(er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_ENABLED) && !(er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_ENABLED)) { u32 fextnvm7 = er32(FEXTNVM7); @@ -3505,10 +3525,13 @@ s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca) switch (hw->mac.type) { case e1000_pch2lan: case e1000_pch_lpt: - /* On I217, the clock frequency is 25MHz or 96MHz as - * indicated by the System Clock Frequency Indication + case e1000_pch_spt: + /* On I217, I218 and I219, the clock frequency is 25MHz + * or 96MHz as indicated by the System Clock Frequency + * Indication */ - if ((hw->mac.type != e1000_pch_lpt) || + if (((hw->mac.type != e1000_pch_lpt) && + (hw->mac.type != e1000_pch_spt)) || (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) { /* Stable 96MHz frequency */ incperiod = INCPERIOD_96MHz; @@ -3875,6 +3898,7 @@ void e1000e_reset(struct e1000_adapter *adapter) break; case e1000_pch2lan: case e1000_pch_lpt: + case e1000_pch_spt: fc->refresh_time = 0x0400; if (adapter->netdev->mtu <= ETH_DATA_LEN) { @@ -4759,7 +4783,8 @@ static void e1000e_update_stats(struct e1000_adapter *adapter) adapter->stats.mgpdc += er32(MGTPDC); /* Correctable ECC Errors */ - if (hw->mac.type == e1000_pch_lpt) { + if ((hw->mac.type == e1000_pch_lpt) || + (hw->mac.type == e1000_pch_spt)) { u32 pbeccsts = er32(PBECCSTS); adapter->corr_errors += @@ -6144,7 +6169,8 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) if (adapter->hw.phy.type == e1000_phy_igp_3) { e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw); - } else if (hw->mac.type == e1000_pch_lpt) { + } else if ((hw->mac.type == e1000_pch_lpt) || + (hw->mac.type == e1000_pch_spt)) { if (!(wufc & (E1000_WUFC_EX | E1000_WUFC_MC | E1000_WUFC_BC))) /* ULP does not support wake from unicast, multicast * or broadcast. @@ -7213,6 +7239,10 @@ static const struct pci_device_id e1000_pci_tbl[] = { { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_V2), board_pch_lpt }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_LM3), board_pch_lpt }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_V3), board_pch_lpt }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_LM), board_pch_spt }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_V), board_pch_spt }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_LM2), board_pch_spt }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_V2), board_pch_spt }, { 0, 0, 0, 0, 0, 0, 0 } /* terminate list */ }; diff --git a/drivers/net/ethernet/intel/e1000e/ptp.c b/drivers/net/ethernet/intel/e1000e/ptp.c index 978ef9c4a043..1490f1e8d6aa 100644 --- a/drivers/net/ethernet/intel/e1000e/ptp.c +++ b/drivers/net/ethernet/intel/e1000e/ptp.c @@ -221,7 +221,9 @@ void e1000e_ptp_init(struct e1000_adapter *adapter) switch (hw->mac.type) { case e1000_pch2lan: case e1000_pch_lpt: - if ((hw->mac.type != e1000_pch_lpt) || + case e1000_pch_spt: + if (((hw->mac.type != e1000_pch_lpt) && + (hw->mac.type != e1000_pch_spt)) || (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) { adapter->ptp_clock_info.max_adj = 24000000 - 1; break; diff --git a/drivers/net/ethernet/intel/e1000e/regs.h b/drivers/net/ethernet/intel/e1000e/regs.h index ea235bbe50d3..85eefc4832ba 100644 --- a/drivers/net/ethernet/intel/e1000e/regs.h +++ b/drivers/net/ethernet/intel/e1000e/regs.h @@ -38,6 +38,7 @@ #define E1000_FEXTNVM4 0x00024 /* Future Extended NVM 4 - RW */ #define E1000_FEXTNVM6 0x00010 /* Future Extended NVM 6 - RW */ #define E1000_FEXTNVM7 0x000E4 /* Future Extended NVM 7 - RW */ +#define E1000_PCIEANACFG 0x00F18 /* PCIE Analog Config */ #define E1000_FCT 0x00030 /* Flow Control Type - RW */ #define E1000_VET 0x00038 /* VLAN Ether Type - RW */ #define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */ @@ -67,6 +68,7 @@ #define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ #define E1000_PBS 0x01008 /* Packet Buffer Size */ #define E1000_PBECCSTS 0x0100C /* Packet Buffer ECC Status - RW */ +#define E1000_IOSFPC 0x00F28 /* TX corrupted data */ #define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ #define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */ #define E1000_FLOP 0x0103C /* FLASH Opcode Register */ @@ -121,6 +123,7 @@ (0x054E4 + ((_i - 16) * 8))) #define E1000_SHRAL(_i) (0x05438 + ((_i) * 8)) #define E1000_SHRAH(_i) (0x0543C + ((_i) * 8)) +#define E1000_TARC0_CB_MULTIQ_3_REQ (1 << 28 | 1 << 29) #define E1000_TDFH 0x03410 /* Tx Data FIFO Head - RW */ #define E1000_TDFT 0x03418 /* Tx Data FIFO Tail - RW */ #define E1000_TDFHS 0x03420 /* Tx Data FIFO Head Saved - RW */ -- 2.30.2