From 79f689aa6b14e058d4effd734e9920ed9531401d Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Fri, 5 Oct 2012 12:05:52 -0300 Subject: [PATCH] drm/i915: rewrite the LCPLL code Right now, we're trying to enable LCPLL at every mode set, but we're never disabling it. Also, we really don't want to be disabling LCPLL since it requires a very complex disable/enable sequence. This register should really be set by the BIOS and we shouldn't be touching it. Still, let's try to check its value and print some errors in case we find something wrong. We're also adding intel_ddi_get_cdclk_freq which will be used later in other places. Signed-off-by: Paulo Zanoni Reviewed-by: Damien Lespiau Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_reg.h | 6 +++++ drivers/gpu/drm/i915/intel_ddi.c | 37 +++++++++++++++++++++++----- drivers/gpu/drm/i915/intel_display.c | 7 ++++++ drivers/gpu/drm/i915/intel_drv.h | 1 + 4 files changed, 45 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index f3a06b421be4..5107ceece3b0 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3456,6 +3456,9 @@ #define GEN7_SQ_CHICKEN_MBCUNIT_CONFIG 0x9030 #define GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB (1<<11) +#define HSW_FUSE_STRAP 0x42014 +#define HSW_CDCLK_LIMIT (1 << 24) + /* PCH */ /* south display engine interrupt: IBX */ @@ -4531,8 +4534,11 @@ #define LCPLL_CTL 0x130040 #define LCPLL_PLL_DISABLE (1<<31) #define LCPLL_PLL_LOCK (1<<30) +#define LCPLL_CLK_FREQ_MASK (3<<26) +#define LCPLL_CLK_FREQ_450 (0<<26) #define LCPLL_CD_CLOCK_DISABLE (1<<25) #define LCPLL_CD2X_CLOCK_DISABLE (1<<23) +#define LCPLL_CD_SOURCE_FCLK (1<<21) /* Pipe WM_LINETIME - watermark line time */ #define PIPE_WM_LINETIME_A 0x45270 diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index bfe375466a0e..187ea3bdc663 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -682,12 +682,6 @@ void intel_ddi_mode_set(struct drm_encoder *encoder, DRM_DEBUG_KMS("WR PLL: %dKHz refresh rate with p=%d, n2=%d r2=%d\n", crtc->mode.clock, p, n2, r2); - /* Enable LCPLL if disabled */ - temp = I915_READ(LCPLL_CTL); - if (temp & LCPLL_PLL_DISABLE) - I915_WRITE(LCPLL_CTL, - temp & ~LCPLL_PLL_DISABLE); - /* Configure WR PLL 1, program the correct divider values for * the desired frequency and wait for warmup */ I915_WRITE(WRPLL_CTL1, @@ -817,3 +811,34 @@ void intel_disable_ddi(struct intel_encoder *encoder) I915_WRITE(DDI_BUF_CTL(port), temp); } + +static int intel_ddi_get_cdclk_freq(struct drm_i915_private *dev_priv) +{ + if (I915_READ(HSW_FUSE_STRAP) & HSW_CDCLK_LIMIT) + return 450; + else if ((I915_READ(LCPLL_CTL) & LCPLL_CLK_FREQ_MASK) == + LCPLL_CLK_FREQ_450) + return 450; + else + return 540; +} + +void intel_ddi_pll_init(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t val = I915_READ(LCPLL_CTL); + + /* The LCPLL register should be turned on by the BIOS. For now let's + * just check its state and print errors in case something is wrong. + * Don't even try to turn it on. + */ + + DRM_DEBUG_KMS("CDCLK running at %dMHz\n", + intel_ddi_get_cdclk_freq(dev_priv)); + + if (val & LCPLL_CD_SOURCE_FCLK) + DRM_ERROR("CDCLK source is not LCPLL\n"); + + if (val & LCPLL_PLL_DISABLE) + DRM_ERROR("LCPLL is disabled\n"); +} diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 6cf0d003d715..40f98d179d80 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -7477,6 +7477,12 @@ static const struct drm_crtc_funcs intel_crtc_funcs = { .page_flip = intel_crtc_page_flip, }; +static void intel_cpu_pll_init(struct drm_device *dev) +{ + if (IS_HASWELL(dev)) + intel_ddi_pll_init(dev); +} + static void intel_pch_pll_init(struct drm_device *dev) { drm_i915_private_t *dev_priv = dev->dev_private; @@ -8085,6 +8091,7 @@ void intel_modeset_init(struct drm_device *dev) DRM_DEBUG_KMS("plane %d init failed: %d\n", i, ret); } + intel_cpu_pll_init(dev); intel_pch_pll_init(dev); /* Just disable it once at startup */ diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 79f8ed66574e..57566b713a7a 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -580,5 +580,6 @@ extern bool intel_ddi_get_hw_state(struct intel_encoder *encoder, extern void intel_ddi_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode); +extern void intel_ddi_pll_init(struct drm_device *dev); #endif /* __INTEL_DRV_H__ */ -- 2.30.2