From 7c86f20d15b7c1132e0c24358ce240ba4cb002b7 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Wed, 12 Jun 2019 21:31:15 +0200 Subject: [PATCH] net: stmmac: use GPIO descriptors in stmmac_mdio_reset Switch stmmac_mdio_reset to use GPIO descriptors. GPIO core handles the "snps,reset-gpio" for GPIO descriptors so we don't need to take care of it inside the driver anymore. The advantage of this is that we now preserve the GPIO flags which are passed via devicetree. This is required on some newer Amlogic boards which use an Open Drain pin for the reset GPIO. This pin can only output a LOW signal or switch to input mode but it cannot output a HIGH signal. There are already devicetree bindings for these special cases and GPIO core already takes care of them but only if we use GPIO descriptors instead of GPIO numbers. Signed-off-by: Martin Blumenstingl Reviewed-by: Linus Walleij Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- .../net/ethernet/stmicro/stmmac/stmmac_mdio.c | 27 +++++++++---------- include/linux/stmmac.h | 2 +- 2 files changed, 14 insertions(+), 15 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c index 093a223fe408..f1c39dd048e7 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c @@ -20,11 +20,11 @@ Maintainer: Giuseppe Cavallaro *******************************************************************************/ +#include #include #include #include #include -#include #include #include #include @@ -251,37 +251,36 @@ int stmmac_mdio_reset(struct mii_bus *bus) #ifdef CONFIG_OF if (priv->device->of_node) { + struct gpio_desc *reset_gpio; + if (data->reset_gpio < 0) { struct device_node *np = priv->device->of_node; if (!np) return 0; - data->reset_gpio = of_get_named_gpio(np, - "snps,reset-gpio", 0); - if (data->reset_gpio < 0) - return 0; + reset_gpio = devm_gpiod_get_optional(priv->device, + "snps,reset", + GPIOD_OUT_LOW); + if (IS_ERR(reset_gpio)) + return PTR_ERR(reset_gpio); - data->active_low = of_property_read_bool(np, - "snps,reset-active-low"); of_property_read_u32_array(np, "snps,reset-delays-us", data->delays, 3); + } else { + reset_gpio = gpio_to_desc(data->reset_gpio); - if (devm_gpio_request(priv->device, data->reset_gpio, - "mdio-reset")) - return 0; + gpiod_direction_output(reset_gpio, 0); } - gpio_direction_output(data->reset_gpio, - data->active_low ? 1 : 0); if (data->delays[0]) msleep(DIV_ROUND_UP(data->delays[0], 1000)); - gpio_set_value(data->reset_gpio, data->active_low ? 0 : 1); + gpiod_set_value_cansleep(reset_gpio, 1); if (data->delays[1]) msleep(DIV_ROUND_UP(data->delays[1], 1000)); - gpio_set_value(data->reset_gpio, data->active_low ? 1 : 0); + gpiod_set_value_cansleep(reset_gpio, 0); if (data->delays[2]) msleep(DIV_ROUND_UP(data->delays[2], 1000)); } diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index 4335bd771ce5..816edb545592 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -97,7 +97,7 @@ struct stmmac_mdio_bus_data { int *irqs; int probed_phy_irq; #ifdef CONFIG_OF - int reset_gpio, active_low; + int reset_gpio; u32 delays[3]; #endif }; -- 2.30.2