From 80e0b97d079289787793ecdee4cfcd2e3a674f70 Mon Sep 17 00:00:00 2001 From: David Bauer Date: Thu, 2 Jan 2020 03:11:39 +0100 Subject: [PATCH] ramips: convert TP-Link MT7620 boards to tpt trigger This converts all MediaTek MT7620 boards from TP-Link to use the now supported WiFi throughput LED trigger. This way, the LED state now covers all VAPs regardless of their name. Also align all single-WiFi LEDs to represent the state of the 2.4GHz radio. This was not always the case previously, as later-added support for the MT7610 altered the phy probing order. Signed-off-by: David Bauer (cherry picked from commit 1e7c6381f0058e49caab8de54eaad4862732f95d) --- target/linux/ramips/base-files/etc/board.d/01_leds | 5 ----- target/linux/ramips/dts/ArcherC2-v1.dts | 1 + target/linux/ramips/dts/ArcherC20i.dts | 1 + target/linux/ramips/dts/ArcherC20v1.dts | 2 ++ target/linux/ramips/dts/ArcherC50.dts | 2 ++ target/linux/ramips/dts/ArcherMR200.dts | 1 + 6 files changed, 7 insertions(+), 5 deletions(-) diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 38125375f4..fa7daf0ff2 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -83,13 +83,10 @@ c108) c20i) ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e" ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01" - ucidef_set_led_wlan "wlan" "wlan" "$boardname:blue:wlan" "phy0radio" ;; c50) ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" - ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" wlan1 - set_wifi_led "$boardname:green:wlan5g" ;; cf-wr800n) ucidef_set_led_netdev "lan" "lan" "$boardname:white:ethernet" eth0.1 @@ -324,12 +321,10 @@ tl-wr841n-v13) tplink,c2-v1) ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch1" "0x1e" ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch1" "0x01" - set_wifi_led "$boardname:green:wlan" ;; tplink,c20-v1) ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e" ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01" - ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0" ;; tplink,c20-v4) ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" diff --git a/target/linux/ramips/dts/ArcherC2-v1.dts b/target/linux/ramips/dts/ArcherC2-v1.dts index 921a50a56c..5444a66461 100644 --- a/target/linux/ramips/dts/ArcherC2-v1.dts +++ b/target/linux/ramips/dts/ArcherC2-v1.dts @@ -57,6 +57,7 @@ wlan { label = "c2-v1:green:wlan"; gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; }; }; diff --git a/target/linux/ramips/dts/ArcherC20i.dts b/target/linux/ramips/dts/ArcherC20i.dts index cf715a413f..52c2878763 100644 --- a/target/linux/ramips/dts/ArcherC20i.dts +++ b/target/linux/ramips/dts/ArcherC20i.dts @@ -36,6 +36,7 @@ wlan { label = "c20i:blue:wlan"; gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; }; }; diff --git a/target/linux/ramips/dts/ArcherC20v1.dts b/target/linux/ramips/dts/ArcherC20v1.dts index 39e33b8ff0..7add569886 100644 --- a/target/linux/ramips/dts/ArcherC20v1.dts +++ b/target/linux/ramips/dts/ArcherC20v1.dts @@ -54,11 +54,13 @@ wlan5g { label = "c20-v1:blue:wlan5g"; gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; }; wlan2g { label = "c20-v1:blue:wlan2g"; gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; }; wps { diff --git a/target/linux/ramips/dts/ArcherC50.dts b/target/linux/ramips/dts/ArcherC50.dts index b6f5bed0b7..3c9f4d7729 100644 --- a/target/linux/ramips/dts/ArcherC50.dts +++ b/target/linux/ramips/dts/ArcherC50.dts @@ -54,11 +54,13 @@ wlan5g { label = "c50:green:wlan5g"; gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; }; wlan2g { label = "c50:green:wlan2g"; gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; }; wps { diff --git a/target/linux/ramips/dts/ArcherMR200.dts b/target/linux/ramips/dts/ArcherMR200.dts index ff00dbe958..0ff2f61d42 100644 --- a/target/linux/ramips/dts/ArcherMR200.dts +++ b/target/linux/ramips/dts/ArcherMR200.dts @@ -71,6 +71,7 @@ wlan { label = "mr200:white:wlan"; gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; }; }; -- 2.30.2