From 842dfc11ea9a21f9825167c8a4f2834b205b0a79 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Fri, 7 Nov 2014 14:13:54 +0100 Subject: [PATCH] MIPS: Fix build with binutils 2.24.51+ Starting with version 2.24.51.20140728 MIPS binutils complain loudly about mixing soft-float and hard-float object files, leading to this build failure since GCC is invoked with "-msoft-float" on MIPS: {standard input}: Warning: .gnu_attribute 4,3 requires `softfloat' LD arch/mips/alchemy/common/built-in.o mipsel-softfloat-linux-gnu-ld: Warning: arch/mips/alchemy/common/built-in.o uses -msoft-float (set by arch/mips/alchemy/common/prom.o), arch/mips/alchemy/common/sleeper.o uses -mhard-float To fix this, we detect if GAS is new enough to support "-msoft-float" command option, and if it does, we can let GCC pass it to GAS; but then we also need to sprinkle the files which make use of floating point registers with the necessary ".set hardfloat" directives. Signed-off-by: Manuel Lauss Cc: Linux-MIPS Cc: Matthew Fortune Cc: Markos Chandras Cc: Maciej W. Rozycki Patchwork: https://patchwork.linux-mips.org/patch/8355/ Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 9 +++++++++ arch/mips/include/asm/asmmacro-32.h | 6 ++++++ arch/mips/include/asm/asmmacro.h | 18 ++++++++++++++++++ arch/mips/include/asm/fpregdef.h | 14 ++++++++++++++ arch/mips/include/asm/fpu.h | 4 ++-- arch/mips/include/asm/mipsregs.h | 11 ++++++++++- arch/mips/kernel/branch.c | 8 ++------ arch/mips/kernel/genex.S | 1 + arch/mips/kernel/r2300_fpu.S | 6 ++++++ arch/mips/kernel/r2300_switch.S | 5 +++++ arch/mips/kernel/r4k_fpu.S | 27 +++++++++++++++++++++++++-- arch/mips/kernel/r4k_switch.S | 15 ++++++++++++++- arch/mips/kernel/r6000_fpu.S | 5 +++++ arch/mips/math-emu/cp1emu.c | 6 +----- 14 files changed, 118 insertions(+), 17 deletions(-) diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 23cb94806fbc..58076472bdd8 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -93,6 +93,15 @@ LDFLAGS_vmlinux += -G 0 -static -n -nostdlib KBUILD_AFLAGS_MODULE += -mlong-calls KBUILD_CFLAGS_MODULE += -mlong-calls +# +# pass -msoft-float to GAS if it supports it. However on newer binutils +# (specifically newer than 2.24.51.20140728) we then also need to explicitly +# set ".set hardfloat" in all files which manipulate floating point registers. +# +ifneq ($(call as-option,-Wa$(comma)-msoft-float,),) + cflags-y += -DGAS_HAS_SET_HARDFLOAT -Wa,-msoft-float +endif + cflags-y += -ffreestanding # diff --git a/arch/mips/include/asm/asmmacro-32.h b/arch/mips/include/asm/asmmacro-32.h index e38c2811d4e2..cdac7b3eeaf7 100644 --- a/arch/mips/include/asm/asmmacro-32.h +++ b/arch/mips/include/asm/asmmacro-32.h @@ -13,6 +13,8 @@ #include .macro fpu_save_single thread tmp=t0 + .set push + SET_HARDFLOAT cfc1 \tmp, fcr31 swc1 $f0, THREAD_FPR0_LS64(\thread) swc1 $f1, THREAD_FPR1_LS64(\thread) @@ -47,9 +49,12 @@ swc1 $f30, THREAD_FPR30_LS64(\thread) swc1 $f31, THREAD_FPR31_LS64(\thread) sw \tmp, THREAD_FCR31(\thread) + .set pop .endm .macro fpu_restore_single thread tmp=t0 + .set push + SET_HARDFLOAT lw \tmp, THREAD_FCR31(\thread) lwc1 $f0, THREAD_FPR0_LS64(\thread) lwc1 $f1, THREAD_FPR1_LS64(\thread) @@ -84,6 +89,7 @@ lwc1 $f30, THREAD_FPR30_LS64(\thread) lwc1 $f31, THREAD_FPR31_LS64(\thread) ctc1 \tmp, fcr31 + .set pop .endm .macro cpu_save_nonscratch thread diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h index cd9a98bc8f60..6caf8766b80f 100644 --- a/arch/mips/include/asm/asmmacro.h +++ b/arch/mips/include/asm/asmmacro.h @@ -57,6 +57,8 @@ #endif /* CONFIG_CPU_MIPSR2 */ .macro fpu_save_16even thread tmp=t0 + .set push + SET_HARDFLOAT cfc1 \tmp, fcr31 sdc1 $f0, THREAD_FPR0_LS64(\thread) sdc1 $f2, THREAD_FPR2_LS64(\thread) @@ -75,11 +77,13 @@ sdc1 $f28, THREAD_FPR28_LS64(\thread) sdc1 $f30, THREAD_FPR30_LS64(\thread) sw \tmp, THREAD_FCR31(\thread) + .set pop .endm .macro fpu_save_16odd thread .set push .set mips64r2 + SET_HARDFLOAT sdc1 $f1, THREAD_FPR1_LS64(\thread) sdc1 $f3, THREAD_FPR3_LS64(\thread) sdc1 $f5, THREAD_FPR5_LS64(\thread) @@ -110,6 +114,8 @@ .endm .macro fpu_restore_16even thread tmp=t0 + .set push + SET_HARDFLOAT lw \tmp, THREAD_FCR31(\thread) ldc1 $f0, THREAD_FPR0_LS64(\thread) ldc1 $f2, THREAD_FPR2_LS64(\thread) @@ -133,6 +139,7 @@ .macro fpu_restore_16odd thread .set push .set mips64r2 + SET_HARDFLOAT ldc1 $f1, THREAD_FPR1_LS64(\thread) ldc1 $f3, THREAD_FPR3_LS64(\thread) ldc1 $f5, THREAD_FPR5_LS64(\thread) @@ -277,6 +284,7 @@ .macro cfcmsa rd, cs .set push .set noat + SET_HARDFLOAT .insn .word CFC_MSA_INSN | (\cs << 11) move \rd, $1 @@ -286,6 +294,7 @@ .macro ctcmsa cd, rs .set push .set noat + SET_HARDFLOAT move $1, \rs .word CTC_MSA_INSN | (\cd << 6) .set pop @@ -294,6 +303,7 @@ .macro ld_d wd, off, base .set push .set noat + SET_HARDFLOAT add $1, \base, \off .word LDD_MSA_INSN | (\wd << 6) .set pop @@ -302,6 +312,7 @@ .macro st_d wd, off, base .set push .set noat + SET_HARDFLOAT add $1, \base, \off .word STD_MSA_INSN | (\wd << 6) .set pop @@ -310,6 +321,7 @@ .macro copy_u_w rd, ws, n .set push .set noat + SET_HARDFLOAT .insn .word COPY_UW_MSA_INSN | (\n << 16) | (\ws << 11) /* move triggers an assembler bug... */ @@ -320,6 +332,7 @@ .macro copy_u_d rd, ws, n .set push .set noat + SET_HARDFLOAT .insn .word COPY_UD_MSA_INSN | (\n << 16) | (\ws << 11) /* move triggers an assembler bug... */ @@ -330,6 +343,7 @@ .macro insert_w wd, n, rs .set push .set noat + SET_HARDFLOAT /* move triggers an assembler bug... */ or $1, \rs, zero .word INSERT_W_MSA_INSN | (\n << 16) | (\wd << 6) @@ -339,6 +353,7 @@ .macro insert_d wd, n, rs .set push .set noat + SET_HARDFLOAT /* move triggers an assembler bug... */ or $1, \rs, zero .word INSERT_D_MSA_INSN | (\n << 16) | (\wd << 6) @@ -381,6 +396,7 @@ st_d 31, THREAD_FPR31, \thread .set push .set noat + SET_HARDFLOAT cfcmsa $1, MSA_CSR sw $1, THREAD_MSA_CSR(\thread) .set pop @@ -389,6 +405,7 @@ .macro msa_restore_all thread .set push .set noat + SET_HARDFLOAT lw $1, THREAD_MSA_CSR(\thread) ctcmsa MSA_CSR, $1 .set pop @@ -441,6 +458,7 @@ .macro msa_init_all_upper .set push .set noat + SET_HARDFLOAT not $1, zero msa_init_upper 0 .set pop diff --git a/arch/mips/include/asm/fpregdef.h b/arch/mips/include/asm/fpregdef.h index 429481f9028d..f184ba088532 100644 --- a/arch/mips/include/asm/fpregdef.h +++ b/arch/mips/include/asm/fpregdef.h @@ -14,6 +14,20 @@ #include +/* + * starting with binutils 2.24.51.20140729, MIPS binutils warn about mixing + * hardfloat and softfloat object files. The kernel build uses soft-float by + * default, so we also need to pass -msoft-float along to GAS if it supports it. + * But this in turn causes assembler errors in files which access hardfloat + * registers. We detect if GAS supports "-msoft-float" in the Makefile and + * explicitly put ".set hardfloat" where floating point registers are touched. + */ +#ifdef GAS_HAS_SET_HARDFLOAT +#define SET_HARDFLOAT .set hardfloat +#else +#define SET_HARDFLOAT +#endif + #if _MIPS_SIM == _MIPS_SIM_ABI32 /* diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h index 4d0aeda68397..dd562414cd5e 100644 --- a/arch/mips/include/asm/fpu.h +++ b/arch/mips/include/asm/fpu.h @@ -145,8 +145,8 @@ static inline void lose_fpu(int save) if (is_msa_enabled()) { if (save) { save_msa(current); - asm volatile("cfc1 %0, $31" - : "=r"(current->thread.fpu.fcr31)); + current->thread.fpu.fcr31 = + read_32bit_cp1_register(CP1_STATUS); } disable_msa(); clear_thread_flag(TIF_USEDMSA); diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index cf3b580c3df6..b46cd220a018 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -1324,7 +1324,7 @@ do { \ /* * Macros to access the floating point coprocessor control registers */ -#define read_32bit_cp1_register(source) \ +#define _read_32bit_cp1_register(source, gas_hardfloat) \ ({ \ int __res; \ \ @@ -1334,12 +1334,21 @@ do { \ " # gas fails to assemble cfc1 for some archs, \n" \ " # like Octeon. \n" \ " .set mips1 \n" \ + " "STR(gas_hardfloat)" \n" \ " cfc1 %0,"STR(source)" \n" \ " .set pop \n" \ : "=r" (__res)); \ __res; \ }) +#ifdef GAS_HAS_SET_HARDFLOAT +#define read_32bit_cp1_register(source) \ + _read_32bit_cp1_register(source, .set hardfloat) +#else +#define read_32bit_cp1_register(source) \ + _read_32bit_cp1_register(source, ) +#endif + #ifdef HAVE_AS_DSP #define rddsp(mask) \ ({ \ diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c index 7b2df224f041..4d7d99d601cc 100644 --- a/arch/mips/kernel/branch.c +++ b/arch/mips/kernel/branch.c @@ -144,7 +144,7 @@ int __mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, case mm_bc1t_op: preempt_disable(); if (is_fpu_owner()) - asm volatile("cfc1\t%0,$31" : "=r" (fcr31)); + fcr31 = read_32bit_cp1_register(CP1_STATUS); else fcr31 = current->thread.fpu.fcr31; preempt_enable(); @@ -562,11 +562,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs, case cop1_op: preempt_disable(); if (is_fpu_owner()) - asm volatile( - ".set push\n" - "\t.set mips1\n" - "\tcfc1\t%0,$31\n" - "\t.set pop" : "=r" (fcr31)); + fcr31 = read_32bit_cp1_register(CP1_STATUS); else fcr31 = current->thread.fpu.fcr31; preempt_enable(); diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index ac35e12cb1f3..a5e26dd90592 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -358,6 +358,7 @@ NESTED(nmi_handler, PT_SIZE, sp) .set push /* gas fails to assemble cfc1 for some archs (octeon).*/ \ .set mips1 + SET_HARDFLOAT cfc1 a1, fcr31 li a2, ~(0x3f << 12) and a2, a1 diff --git a/arch/mips/kernel/r2300_fpu.S b/arch/mips/kernel/r2300_fpu.S index f31063dbdaeb..5ce3b746cedc 100644 --- a/arch/mips/kernel/r2300_fpu.S +++ b/arch/mips/kernel/r2300_fpu.S @@ -28,6 +28,8 @@ .set mips1 /* Save floating point context */ LEAF(_save_fp_context) + .set push + SET_HARDFLOAT li v0, 0 # assume success cfc1 t1,fcr31 EX(swc1 $f0,(SC_FPREGS+0)(a0)) @@ -65,6 +67,7 @@ LEAF(_save_fp_context) EX(sw t1,(SC_FPC_CSR)(a0)) cfc1 t0,$0 # implementation/version jr ra + .set pop .set nomacro EX(sw t0,(SC_FPC_EIR)(a0)) .set macro @@ -80,6 +83,8 @@ LEAF(_save_fp_context) * stack frame which might have been changed by the user. */ LEAF(_restore_fp_context) + .set push + SET_HARDFLOAT li v0, 0 # assume success EX(lw t0,(SC_FPC_CSR)(a0)) EX(lwc1 $f0,(SC_FPREGS+0)(a0)) @@ -116,6 +121,7 @@ LEAF(_restore_fp_context) EX(lwc1 $f31,(SC_FPREGS+248)(a0)) jr ra ctc1 t0,fcr31 + .set pop END(_restore_fp_context) .set reorder diff --git a/arch/mips/kernel/r2300_switch.S b/arch/mips/kernel/r2300_switch.S index 20b7b040e76f..435ea652f5fa 100644 --- a/arch/mips/kernel/r2300_switch.S +++ b/arch/mips/kernel/r2300_switch.S @@ -120,6 +120,9 @@ LEAF(_restore_fp) #define FPU_DEFAULT 0x00000000 + .set push + SET_HARDFLOAT + LEAF(_init_fpu) mfc0 t0, CP0_STATUS li t1, ST0_CU1 @@ -165,3 +168,5 @@ LEAF(_init_fpu) mtc1 t0, $f31 jr ra END(_init_fpu) + + .set pop diff --git a/arch/mips/kernel/r4k_fpu.S b/arch/mips/kernel/r4k_fpu.S index 8352523568e6..6c160c67984c 100644 --- a/arch/mips/kernel/r4k_fpu.S +++ b/arch/mips/kernel/r4k_fpu.S @@ -19,8 +19,12 @@ #include #include +/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */ +#undef fp + .macro EX insn, reg, src .set push + SET_HARDFLOAT .set nomacro .ex\@: \insn \reg, \src .set pop @@ -33,12 +37,17 @@ .set arch=r4000 LEAF(_save_fp_context) + .set push + SET_HARDFLOAT cfc1 t1, fcr31 + .set pop #if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) .set push + SET_HARDFLOAT #ifdef CONFIG_CPU_MIPS32_R2 - .set mips64r2 + .set mips32r2 + .set fp=64 mfc0 t0, CP0_STATUS sll t0, t0, 5 bgez t0, 1f # skip storing odd if FR=0 @@ -64,6 +73,8 @@ LEAF(_save_fp_context) 1: .set pop #endif + .set push + SET_HARDFLOAT /* Store the 16 even double precision registers */ EX sdc1 $f0, SC_FPREGS+0(a0) EX sdc1 $f2, SC_FPREGS+16(a0) @@ -84,11 +95,14 @@ LEAF(_save_fp_context) EX sw t1, SC_FPC_CSR(a0) jr ra li v0, 0 # success + .set pop END(_save_fp_context) #ifdef CONFIG_MIPS32_COMPAT /* Save 32-bit process floating point context */ LEAF(_save_fp_context32) + .set push + SET_HARDFLOAT cfc1 t1, fcr31 mfc0 t0, CP0_STATUS @@ -134,6 +148,7 @@ LEAF(_save_fp_context32) EX sw t1, SC32_FPC_CSR(a0) cfc1 t0, $0 # implementation/version EX sw t0, SC32_FPC_EIR(a0) + .set pop jr ra li v0, 0 # success @@ -150,8 +165,10 @@ LEAF(_restore_fp_context) #if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) .set push + SET_HARDFLOAT #ifdef CONFIG_CPU_MIPS32_R2 - .set mips64r2 + .set mips32r2 + .set fp=64 mfc0 t0, CP0_STATUS sll t0, t0, 5 bgez t0, 1f # skip loading odd if FR=0 @@ -175,6 +192,8 @@ LEAF(_restore_fp_context) EX ldc1 $f31, SC_FPREGS+248(a0) 1: .set pop #endif + .set push + SET_HARDFLOAT EX ldc1 $f0, SC_FPREGS+0(a0) EX ldc1 $f2, SC_FPREGS+16(a0) EX ldc1 $f4, SC_FPREGS+32(a0) @@ -192,6 +211,7 @@ LEAF(_restore_fp_context) EX ldc1 $f28, SC_FPREGS+224(a0) EX ldc1 $f30, SC_FPREGS+240(a0) ctc1 t1, fcr31 + .set pop jr ra li v0, 0 # success END(_restore_fp_context) @@ -199,6 +219,8 @@ LEAF(_restore_fp_context) #ifdef CONFIG_MIPS32_COMPAT LEAF(_restore_fp_context32) /* Restore an o32 sigcontext. */ + .set push + SET_HARDFLOAT EX lw t1, SC32_FPC_CSR(a0) mfc0 t0, CP0_STATUS @@ -242,6 +264,7 @@ LEAF(_restore_fp_context32) ctc1 t1, fcr31 jr ra li v0, 0 # success + .set pop END(_restore_fp_context32) #endif diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S index 4c4ec1812420..64591e671878 100644 --- a/arch/mips/kernel/r4k_switch.S +++ b/arch/mips/kernel/r4k_switch.S @@ -22,6 +22,9 @@ #include +/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */ +#undef fp + /* * Offset to the current process status flags, the first 32 bytes of the * stack are not used. @@ -65,8 +68,12 @@ bgtz a3, 1f /* Save 128b MSA vector context + scalar FP control & status. */ + .set push + SET_HARDFLOAT cfc1 t1, fcr31 msa_save_all a0 + .set pop /* SET_HARDFLOAT */ + sw t1, THREAD_FCR31(a0) b 2f @@ -161,6 +168,9 @@ LEAF(_init_msa_upper) #define FPU_DEFAULT 0x00000000 + .set push + SET_HARDFLOAT + LEAF(_init_fpu) mfc0 t0, CP0_STATUS li t1, ST0_CU1 @@ -232,7 +242,8 @@ LEAF(_init_fpu) #ifdef CONFIG_CPU_MIPS32_R2 .set push - .set mips64r2 + .set mips32r2 + .set fp=64 sll t0, t0, 5 # is Status.FR set? bgez t0, 1f # no: skip setting upper 32b @@ -291,3 +302,5 @@ LEAF(_init_fpu) #endif jr ra END(_init_fpu) + + .set pop /* SET_HARDFLOAT */ diff --git a/arch/mips/kernel/r6000_fpu.S b/arch/mips/kernel/r6000_fpu.S index da0fbe46d83b..47077380c15c 100644 --- a/arch/mips/kernel/r6000_fpu.S +++ b/arch/mips/kernel/r6000_fpu.S @@ -18,6 +18,9 @@ .set noreorder .set mips2 + .set push + SET_HARDFLOAT + /* Save floating point context */ LEAF(_save_fp_context) mfc0 t0,CP0_STATUS @@ -85,3 +88,5 @@ 1: jr ra nop END(_restore_fp_context) + + .set pop /* SET_HARDFLOAT */ diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c index 51a0fde4bec1..cac529a405b8 100644 --- a/arch/mips/math-emu/cp1emu.c +++ b/arch/mips/math-emu/cp1emu.c @@ -584,11 +584,7 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, if (insn.i_format.rs == bc_op) { preempt_disable(); if (is_fpu_owner()) - asm volatile( - ".set push\n" - "\t.set mips1\n" - "\tcfc1\t%0,$31\n" - "\t.set pop" : "=r" (fcr31)); + fcr31 = read_32bit_cp1_register(CP1_STATUS); else fcr31 = current->thread.fpu.fcr31; preempt_enable(); -- 2.30.2