From 8915f36441d4506384b6e1be38ed0037946a77df Mon Sep 17 00:00:00 2001 From: Alexandru M Stan Date: Wed, 2 Sep 2015 16:27:58 -0700 Subject: [PATCH] ARM: dts: rockchip: pull up cts lines on rk3288 The flow control lines from a user accessible UART are optional, the user might not have anything connected to those pins. In order to prevent random interrupts happening and noise affecting the cts pin should be pulled up. Note that the default state for that pin on the rk3288 is pulled up, so this patch merely restores them. This is similar to what we're already doing with the RX pin, so it should be safe. At worst it might be a slightly higher power usage (through ~50 kohms) when the cts is low. Suggested-by: Neil Hendin Signed-off-by: Alexandru M Stan Reviewed-by: Douglas Anderson Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 906e938fb6bf..0e8fd5353724 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -1211,7 +1211,7 @@ }; uart0_cts: uart0-cts { - rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>; }; uart0_rts: uart0-rts { @@ -1226,7 +1226,7 @@ }; uart1_cts: uart1-cts { - rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_up>; }; uart1_rts: uart1-rts { @@ -1249,7 +1249,7 @@ }; uart3_cts: uart3-cts { - rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_up>; }; uart3_rts: uart3-rts { @@ -1264,7 +1264,7 @@ }; uart4_cts: uart4-cts { - rockchip,pins = <5 14 3 &pcfg_pull_none>; + rockchip,pins = <5 14 3 &pcfg_pull_up>; }; uart4_rts: uart4-rts { -- 2.30.2