From 89ff05ec553f3e70b8773c501da01bf7ad952cab Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Thu, 21 Oct 2010 08:37:41 +0000 Subject: [PATCH] phylib: make local function static The following functions are not used directly by any drivers: phy_attach_direct phy_device_create phy_prepare_link genphy_config_advert genphy_setup_forced phy_config_interrupt phy_clear_interrypt phy_sanitize_settings phy_enable_interrupts phy_disable_interrupts Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- Documentation/networking/phy.txt | 18 ------------------ drivers/net/phy/phy.c | 13 +++++-------- drivers/net/phy/phy_device.c | 19 ++++++++++--------- include/linux/phy.h | 12 ------------ 4 files changed, 15 insertions(+), 47 deletions(-) diff --git a/Documentation/networking/phy.txt b/Documentation/networking/phy.txt index 88bb71b46da4..9eb1ba52013d 100644 --- a/Documentation/networking/phy.txt +++ b/Documentation/networking/phy.txt @@ -177,18 +177,6 @@ Doing it all yourself A convenience function to print out the PHY status neatly. - int phy_clear_interrupt(struct phy_device *phydev); - int phy_config_interrupt(struct phy_device *phydev, u32 interrupts); - - Clear the PHY's interrupt, and configure which ones are allowed, - respectively. Currently only supports all on, or all off. - - int phy_enable_interrupts(struct phy_device *phydev); - int phy_disable_interrupts(struct phy_device *phydev); - - Functions which enable/disable PHY interrupts, clearing them - before and after, respectively. - int phy_start_interrupts(struct phy_device *phydev); int phy_stop_interrupts(struct phy_device *phydev); @@ -213,12 +201,6 @@ Doing it all yourself Fills the phydev structure with up-to-date information about the current settings in the PHY. - void phy_sanitize_settings(struct phy_device *phydev) - - Resolves differences between currently desired settings, and - supported settings for the given PHY device. Does not make - the changes in the hardware, though. - int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd); int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd); diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 1bb16cb79433..7670aac0e93f 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -65,7 +65,7 @@ EXPORT_SYMBOL(phy_print_status); * * Returns 0 on success on < 0 on error. */ -int phy_clear_interrupt(struct phy_device *phydev) +static int phy_clear_interrupt(struct phy_device *phydev) { int err = 0; @@ -82,7 +82,7 @@ int phy_clear_interrupt(struct phy_device *phydev) * * Returns 0 on success on < 0 on error. */ -int phy_config_interrupt(struct phy_device *phydev, u32 interrupts) +static int phy_config_interrupt(struct phy_device *phydev, u32 interrupts) { int err = 0; @@ -208,7 +208,7 @@ static inline int phy_find_valid(int idx, u32 features) * duplexes. Drop down by one in this order: 1000/FULL, * 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF. */ -void phy_sanitize_settings(struct phy_device *phydev) +static void phy_sanitize_settings(struct phy_device *phydev) { u32 features = phydev->supported; int idx; @@ -223,7 +223,6 @@ void phy_sanitize_settings(struct phy_device *phydev) phydev->speed = settings[idx].speed; phydev->duplex = settings[idx].duplex; } -EXPORT_SYMBOL(phy_sanitize_settings); /** * phy_ethtool_sset - generic ethtool sset function, handles all the details @@ -532,7 +531,7 @@ static irqreturn_t phy_interrupt(int irq, void *phy_dat) * phy_enable_interrupts - Enable the interrupts from the PHY side * @phydev: target phy_device struct */ -int phy_enable_interrupts(struct phy_device *phydev) +static int phy_enable_interrupts(struct phy_device *phydev) { int err; @@ -545,13 +544,12 @@ int phy_enable_interrupts(struct phy_device *phydev) return err; } -EXPORT_SYMBOL(phy_enable_interrupts); /** * phy_disable_interrupts - Disable the PHY interrupts from the PHY side * @phydev: target phy_device struct */ -int phy_disable_interrupts(struct phy_device *phydev) +static int phy_disable_interrupts(struct phy_device *phydev) { int err; @@ -574,7 +572,6 @@ phy_err: return err; } -EXPORT_SYMBOL(phy_disable_interrupts); /** * phy_start_interrupts - request and enable interrupts for a PHY device diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 16ddc77313cb..993c52c82aeb 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -57,6 +57,9 @@ extern void mdio_bus_exit(void); static LIST_HEAD(phy_fixup_list); static DEFINE_MUTEX(phy_fixup_lock); +static int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, + u32 flags, phy_interface_t interface); + /* * Creates a new phy_fixup and adds it to the list * @bus_id: A string which matches phydev->dev.bus_id (or PHY_ANY_ID) @@ -146,7 +149,8 @@ int phy_scan_fixups(struct phy_device *phydev) } EXPORT_SYMBOL(phy_scan_fixups); -struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id) +static struct phy_device* phy_device_create(struct mii_bus *bus, + int addr, int phy_id) { struct phy_device *dev; @@ -193,7 +197,6 @@ struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id) return dev; } -EXPORT_SYMBOL(phy_device_create); /** * get_phy_id - reads the specified addr for its ID. @@ -316,7 +319,7 @@ EXPORT_SYMBOL(phy_find_first); * If you want to monitor your own link state, don't call * this function. */ -void phy_prepare_link(struct phy_device *phydev, +static void phy_prepare_link(struct phy_device *phydev, void (*handler)(struct net_device *)) { phydev->adjust_link = handler; @@ -435,8 +438,8 @@ int phy_init_hw(struct phy_device *phydev) * the attaching device, and given a callback for link status * change. The phy_device is returned to the attaching driver. */ -int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, - u32 flags, phy_interface_t interface) +static int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, + u32 flags, phy_interface_t interface) { struct device *d = &phydev->dev; @@ -473,7 +476,6 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, * (dev_flags and interface) */ return phy_init_hw(phydev); } -EXPORT_SYMBOL(phy_attach_direct); /** * phy_attach - attach a network device to a particular PHY device @@ -540,7 +542,7 @@ EXPORT_SYMBOL(phy_detach); * what is supported. Returns < 0 on error, 0 if the PHY's advertisement * hasn't changed, and > 0 if it has changed. */ -int genphy_config_advert(struct phy_device *phydev) +static int genphy_config_advert(struct phy_device *phydev) { u32 advertise; int oldadv, adv; @@ -605,7 +607,6 @@ int genphy_config_advert(struct phy_device *phydev) return changed; } -EXPORT_SYMBOL(genphy_config_advert); /** * genphy_setup_forced - configures/forces speed/duplex from @phydev @@ -615,7 +616,7 @@ EXPORT_SYMBOL(genphy_config_advert); * to the values in phydev. Assumes that the values are valid. * Please see phy_sanitize_settings(). */ -int genphy_setup_forced(struct phy_device *phydev) +static int genphy_setup_forced(struct phy_device *phydev) { int err; int ctl = 0; diff --git a/include/linux/phy.h b/include/linux/phy.h index a6e047a04f79..7da5fa845959 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -472,11 +472,7 @@ static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val) int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id); struct phy_device* get_phy_device(struct mii_bus *bus, int addr); int phy_device_register(struct phy_device *phy); -int phy_clear_interrupt(struct phy_device *phydev); -int phy_config_interrupt(struct phy_device *phydev, u32 interrupts); int phy_init_hw(struct phy_device *phydev); -int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, - u32 flags, phy_interface_t interface); struct phy_device * phy_attach(struct net_device *dev, const char *bus_id, u32 flags, phy_interface_t interface); struct phy_device *phy_find_first(struct mii_bus *bus); @@ -492,17 +488,12 @@ void phy_start(struct phy_device *phydev); void phy_stop(struct phy_device *phydev); int phy_start_aneg(struct phy_device *phydev); -void phy_sanitize_settings(struct phy_device *phydev); int phy_stop_interrupts(struct phy_device *phydev); -int phy_enable_interrupts(struct phy_device *phydev); -int phy_disable_interrupts(struct phy_device *phydev); static inline int phy_read_status(struct phy_device *phydev) { return phydev->drv->read_status(phydev); } -int genphy_config_advert(struct phy_device *phydev); -int genphy_setup_forced(struct phy_device *phydev); int genphy_restart_aneg(struct phy_device *phydev); int genphy_config_aneg(struct phy_device *phydev); int genphy_update_link(struct phy_device *phydev); @@ -511,8 +502,6 @@ int genphy_suspend(struct phy_device *phydev); int genphy_resume(struct phy_device *phydev); void phy_driver_unregister(struct phy_driver *drv); int phy_driver_register(struct phy_driver *new_driver); -void phy_prepare_link(struct phy_device *phydev, - void (*adjust_link)(struct net_device *)); void phy_state_machine(struct work_struct *work); void phy_start_machine(struct phy_device *phydev, void (*handler)(struct net_device *)); @@ -523,7 +512,6 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd); int phy_start_interrupts(struct phy_device *phydev); void phy_print_status(struct phy_device *phydev); -struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id); void phy_device_free(struct phy_device *phydev); int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask, -- 2.30.2