From 8c100e74409ad3bbcb8a1ccdff4540fc0aa7a0fc Mon Sep 17 00:00:00 2001 From: Li Jun Date: Tue, 15 Dec 2015 17:51:29 +0800 Subject: [PATCH] usb: chipidea: otg: use usb autosuspend to suspend bus for HNP Directly manipulate the controller regsiter to suspend the usb bus for HNP is not the proper way, this should be done through the usbcore by usb autosuspend. So to start HNP, autosuspend support should be added for OTG devices interface driver if it's not enabled. Signed-off-by: Li Jun Signed-off-by: Peter Chen --- drivers/usb/chipidea/otg_fsm.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-) diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c index 00ab59d45da1..ba90dc66703d 100644 --- a/drivers/usb/chipidea/otg_fsm.c +++ b/drivers/usb/chipidea/otg_fsm.c @@ -485,20 +485,30 @@ static void ci_otg_loc_conn(struct otg_fsm *fsm, int on) /* * Generate SOF by host. - * This is controlled through suspend/resume the port. * In host mode, controller will automatically send SOF. * Suspend will block the data on the port. + * + * This is controlled through usbcore by usb autosuspend, + * so the usb device class driver need support autosuspend, + * otherwise the bus suspend will not happen. */ static void ci_otg_loc_sof(struct otg_fsm *fsm, int on) { - struct ci_hdrc *ci = container_of(fsm, struct ci_hdrc, fsm); + struct usb_device *udev; - if (on) - hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_FPR, - PORTSC_FPR); - else - hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_SUSP, - PORTSC_SUSP); + if (!fsm->otg->host) + return; + + udev = usb_hub_find_child(fsm->otg->host->root_hub, 1); + if (!udev) + return; + + if (on) { + usb_disable_autosuspend(udev); + } else { + pm_runtime_set_autosuspend_delay(&udev->dev, 0); + usb_enable_autosuspend(udev); + } } /* -- 2.30.2