From 8c64824576598117958691853de68bf4dcfc3c06 Mon Sep 17 00:00:00 2001 From: Piotr Dymacz Date: Thu, 15 Feb 2018 23:15:53 +0100 Subject: [PATCH] ar71xx: add support for GainStrong Oolite V5.2 GainStrong Oolite V5.2 is a small (39.5 x 78 mm), dual-band system on module, based on Qualcomm QCA9531 + QCA9887. All QCA9531 SOC GPIOs are available on castellated pins. Specification: - 650/400/200 MHz (CPU/DDR/AHB) - 64/128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 5x 10/100 Mbps Ethernet (all ports available on castellated pins) - 2T2R 2.4 GHz (QCA9531), with ext. PA and LNA - 1T1R 5 GHz (QCA9887) with ext. FEM (SKY85710-11) - 3x U.FL - 1x USB 2.0 The dedicated development board includes 5 FE ports, USB 2.0 port, two buttons (one directly connected to SOC reset input), header with all GPIOs and several LEDs. Flash instruction: Vendor firmware is based on OpenWrt. LuCI or sysupgrade can be used to flash OpenWrt firmware. Signed-off-by: Piotr Dymacz --- .../ar71xx/base-files/etc/board.d/02_network | 2 + target/linux/ar71xx/base-files/etc/diag.sh | 1 + .../etc/hotplug.d/firmware/11-ath10k-caldata | 2 + target/linux/ar71xx/base-files/lib/ar71xx.sh | 6 + .../ar71xx/base-files/lib/upgrade/platform.sh | 2 + target/linux/ar71xx/config-4.4 | 1 + target/linux/ar71xx/config-4.9 | 1 + .../files/arch/mips/ath79/Kconfig.openwrt | 11 ++ .../ar71xx/files/arch/mips/ath79/Makefile | 1 + .../arch/mips/ath79/mach-gs-oolite-v5-2.c | 111 ++++++++++++++++++ .../ar71xx/files/arch/mips/ath79/machtypes.h | 2 + target/linux/ar71xx/generic/config-default | 1 + target/linux/ar71xx/image/generic.mk | 19 +++ 13 files changed, 160 insertions(+) create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-gs-oolite-v5-2.c diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index 42b40e35ff98..8f492cbf02d8 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -29,6 +29,8 @@ ar71xx_setup_interfaces() minibox-v1|\ mynet-n600|\ oolite-v1|\ + oolite-v5.2|\ + oolite-v5.2-dev|\ qihoo-c301|\ r602n|\ rb-750|\ diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 38df0c15d179..6b53ad03c7a6 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -205,6 +205,7 @@ get_status_led() { status_led="$board:blue:status" ;; e600g-v2|\ + oolite-v5.2-dev|\ wifi-pineapple-nano) status_led="$board:blue:system" ;; diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index e6ea873e40b8..c93ce2a61477 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -75,6 +75,8 @@ case "$FIRMWARE" in dlan-pro-1200-ac|\ e1700ac-v2|\ e600gac-v2|\ + oolite-v5.2|\ + oolite-v5.2-dev|\ sr3200|\ xd3200) ath10kcal_extract "art" 20480 2116 diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 96b3e650f1fd..01ac29601d04 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -865,6 +865,12 @@ ar71xx_board_detect() { *"Packet Squirrel") name="packet-squirrel" ;; + *"Oolite V5.2") + name="oolite-v5.2" + ;; + *"Oolite V5.2-Dev") + name="oolite-v5.2-dev" + ;; *"PB42") name="pb42" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index c73dbd49ecc9..7738db33a7f5 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -399,6 +399,8 @@ platform_check_image() { omy-x1|\ onion-omega|\ oolite-v1|\ + oolite-v5.2|\ + oolite-v5.2-dev|\ packet-squirrel|\ re355|\ re450|\ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index d49cebf81251..c55bdab0e820 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -124,6 +124,7 @@ CONFIG_ATH79=y # CONFIG_ATH79_MACH_GL_MIFI is not set # CONFIG_ATH79_MACH_GL_USB150 is not set # CONFIG_ATH79_MACH_GS_OOLITE_V1 is not set +# CONFIG_ATH79_MACH_GS_OOLITE_V5_2 is not set # CONFIG_ATH79_MACH_HIVEAP_121 is not set # CONFIG_ATH79_MACH_HIWIFI_HC6361 is not set # CONFIG_ATH79_MACH_HORNET_UB is not set diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9 index c6c5cf3ce375..026d5bb61735 100644 --- a/target/linux/ar71xx/config-4.9 +++ b/target/linux/ar71xx/config-4.9 @@ -122,6 +122,7 @@ CONFIG_ATH79=y # CONFIG_ATH79_MACH_GL_MIFI is not set # CONFIG_ATH79_MACH_GL_USB150 is not set # CONFIG_ATH79_MACH_GS_OOLITE_V1 is not set +# CONFIG_ATH79_MACH_GS_OOLITE_V5_2 is not set # CONFIG_ATH79_MACH_HIVEAP_121 is not set # CONFIG_ATH79_MACH_HIWIFI_HC6361 is not set # CONFIG_ATH79_MACH_HORNET_UB is not set diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index ed2d42e7f1a4..ec3c329d7a14 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -890,6 +890,17 @@ config ATH79_MACH_GS_OOLITE_V1 select ATH79_DEV_USB select ATH79_DEV_WMAC +config ATH79_MACH_GS_OOLITE_V5_2 + bool "GainStrong Oolite V5.2 support" + select SOC_QCA953X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + config ATH79_MACH_HIVEAP_121 bool "Aerohive HiveAP-121 support" select SOC_AR934X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 54f4053b41f2..62d731720602 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -132,6 +132,7 @@ obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o obj-$(CONFIG_ATH79_MACH_GL_MIFI) += mach-gl-mifi.o obj-$(CONFIG_ATH79_MACH_GL_USB150) += mach-gl-usb150.o obj-$(CONFIG_ATH79_MACH_GS_OOLITE_V1) += mach-gs-oolite-v1.o +obj-$(CONFIG_ATH79_MACH_GS_OOLITE_V5_2) += mach-gs-oolite-v5-2.o obj-$(CONFIG_ATH79_MACH_HIVEAP_121) += mach-hiveap-121.o obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361) += mach-hiwifi-hc6361.o obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gs-oolite-v5-2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gs-oolite-v5-2.c new file mode 100644 index 000000000000..64dc4f334541 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gs-oolite-v5-2.c @@ -0,0 +1,111 @@ +/* + * GainStrong Oolite V5.2 module and development board support + * + * Copyright (C) 2018 Piotr Dymacz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include + +#include +#include + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" +#include "pci.h" + +#define GS_OOLITE_V5_2_DEV_GPIO_BTN_RESET 17 +#define GS_OOLITE_V5_2_DEV_GPIO_LED_SYSTEM 13 + +#define GS_KEYS_POLL_INTERVAL 20 /* msec */ +#define GS_KEYS_DEBOUNCE_INTERVAL (3 * GS_KEYS_POLL_INTERVAL) + +#define GS_OOLITE_V5_2_WMAC_CALDATA_OFFSET 0x1000 + +static const char *gs_oolite_v5_2_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data gs_oolite_v5_2_flash_data = { + .part_probes = gs_oolite_v5_2_part_probes, +}; + +static struct gpio_led gs_oolite_v5_2_dev_gpio_leds[] __initdata = { + { + .name = "oolite-v5.2-dev:blue:system", + .gpio = GS_OOLITE_V5_2_DEV_GPIO_LED_SYSTEM, + .active_low = 0, + }, +}; + +static struct gpio_keys_button gs_oolite_v5_2_dev_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = GS_KEYS_DEBOUNCE_INTERVAL, + .gpio = GS_OOLITE_V5_2_DEV_GPIO_BTN_RESET, + .active_low = 1, + }, +}; + +static void __init gs_oolite_v5_2_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(&gs_oolite_v5_2_flash_data); + + ath79_setup_ar933x_phy4_switch(false, false); + + ath79_register_mdio(0, 0x0); + + ath79_switch_data.phy4_mii_en = 1; + ath79_switch_data.phy_poll_mask |= BIT(4); + + /* LAN */ + ath79_eth1_data.duplex = DUPLEX_FULL; + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_init_mac(ath79_eth1_data.mac_addr, art + 6, 0); + ath79_register_eth(1); + + /* WAN */ + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = BIT(4); + ath79_eth0_data.speed = SPEED_100; + ath79_init_mac(ath79_eth0_data.mac_addr, art, 0); + ath79_register_eth(0); + + ath79_register_pci(); + ath79_register_usb(); + ath79_register_wmac(art + GS_OOLITE_V5_2_WMAC_CALDATA_OFFSET, NULL); +} + +static void __init gs_oolite_v5_2_dev_setup(void) +{ + gs_oolite_v5_2_setup(); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(gs_oolite_v5_2_dev_gpio_leds), + gs_oolite_v5_2_dev_gpio_leds); + + ath79_register_gpio_keys_polled(-1, GS_KEYS_POLL_INTERVAL, + ARRAY_SIZE(gs_oolite_v5_2_dev_gpio_keys), + gs_oolite_v5_2_dev_gpio_keys); +} + +MIPS_MACHINE(ATH79_MACH_GS_OOLITE_V5_2, "OOLITE-V5-2", + "GainStrong Oolite V5.2", gs_oolite_v5_2_setup); + +MIPS_MACHINE(ATH79_MACH_GS_OOLITE_V5_2_DEV, "OOLITE-V5-2-DEV", + "GainStrong Oolite V5.2-Dev", gs_oolite_v5_2_dev_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index b3250053a6fc..46bc49458b97 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -128,6 +128,8 @@ enum ath79_mach_type { ATH79_MACH_GL_USB150, /* GL.iNet GL-USB150 */ ATH79_MACH_GS_MINIBOX_V1, /* GainStrong MiniBox V1.0 */ ATH79_MACH_GS_OOLITE_V1, /* GainStrong Oolite V1.0 */ + ATH79_MACH_GS_OOLITE_V5_2, /* GainStrong Oolite V5.2 */ + ATH79_MACH_GS_OOLITE_V5_2_DEV, /* GainStrong Oolite V5.2-Dev */ ATH79_MACH_HIVEAP_121, /* Aerohive HiveAP-121*/ ATH79_MACH_HIWIFI_HC6361, /* HiWiFi HC6361 */ ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */ diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default index 658e120b96e1..184087d38aae 100644 --- a/target/linux/ar71xx/generic/config-default +++ b/target/linux/ar71xx/generic/config-default @@ -95,6 +95,7 @@ CONFIG_ATH79_MACH_GL_INET=y CONFIG_ATH79_MACH_GL_MIFI=y CONFIG_ATH79_MACH_GL_USB150=y CONFIG_ATH79_MACH_GS_OOLITE_V1=y +CONFIG_ATH79_MACH_GS_OOLITE_V5_2=y CONFIG_ATH79_MACH_HIWIFI_HC6361=y CONFIG_ATH79_MACH_HORNET_UB=y CONFIG_ATH79_MACH_JA76PF=y diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk index e1cd21d9cf1e..37231e022893 100644 --- a/target/linux/ar71xx/image/generic.mk +++ b/target/linux/ar71xx/image/generic.mk @@ -852,6 +852,25 @@ define Device/oolite-v1 endef TARGET_DEVICES += oolite-v1 +define Device/oolite-v5.2 + $(Device/tplink-16mlzma) + DEVICE_TITLE := GainStrong Oolite V5.2 + DEVICE_PACKAGES := ath10k-firmware-qca9887 kmod-ath10k kmod-usb-core kmod-usb2 + BOARDNAME := OOLITE-V5-2 + DEVICE_PROFILE := OOLITEV52 + TPLINK_HWID := 0x3C00010B + IMAGES := sysupgrade.bin +endef +TARGET_DEVICES += oolite-v5.2 + +define Device/oolite-v5.2-dev + $(Device/oolite-v5.2) + DEVICE_TITLE := GainStrong Oolite V5.2-Dev (development board) + BOARDNAME := OOLITE-V5-2-DEV + DEVICE_PROFILE := OOLITEV52DEV +endef +TARGET_DEVICES += oolite-v5.2-dev + define Device/omy-g1 $(Device/tplink-16mlzma) DEVICE_TITLE := OMYlink OMY-G1 -- 2.30.2