From 8e6c8aa3b52e573a6db1f58b2ba9a9106a012963 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 18 Apr 2019 22:45:09 +0200 Subject: [PATCH] isdn: gigaset: remove i4l support isdn4linux is getting removed, and the gigaset driver can still use the CAPI support, so this can all go away. Signed-off-by: Arnd Bergmann --- Documentation/isdn/README.gigaset | 36 +- drivers/isdn/gigaset/Kconfig | 9 - drivers/isdn/gigaset/Makefile | 10 +- drivers/isdn/gigaset/i4l.c | 695 ------------------------------ 4 files changed, 15 insertions(+), 735 deletions(-) delete mode 100644 drivers/isdn/gigaset/i4l.c diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset index 9b1ce277ca3d..f6184b637182 100644 --- a/Documentation/isdn/README.gigaset +++ b/Documentation/isdn/README.gigaset @@ -48,9 +48,8 @@ GigaSet 307x Device Driver 1.2. Software -------- - The driver works with the Kernel CAPI subsystem as well as the old - ISDN4Linux subsystem, so it can be used with any software which is able - to use CAPI 2.0 or ISDN4Linux for ISDN connections (voice or data). + The driver works with the Kernel CAPI subsystem and can be used with any + software which is able to use CAPI 2.0 for ISDN connections (voice or data). There are some user space tools available at https://sourceforge.net/projects/gigaset307x/ @@ -92,7 +91,7 @@ GigaSet 307x Device Driver gigaset debug debug level (see section 3.2.) startmode initial operation mode (see section 2.5.): - bas_gigaset ) 1=ISDN4linux/CAPI (default), 0=Unimodem + bas_gigaset ) 1=CAPI (default), 0=Unimodem ser_gigaset ) usb_gigaset ) cidmode initial Call-ID mode setting (see section 2.5.): 1=on (default), 0=off @@ -154,18 +153,10 @@ GigaSet 307x Device Driver 2.3. CAPI ---- - If the driver is compiled with CAPI support (kernel configuration option - GIGASET_CAPI) the devices will show up as CAPI controllers as soon as the - corresponding driver module is loaded, and can then be used with CAPI 2.0 - kernel and user space applications. For user space access, the module - capi.ko must be loaded. - - Legacy ISDN4Linux applications are supported via the capidrv - compatibility driver. The kernel module capidrv.ko must be loaded - explicitly with the command - modprobe capidrv - if needed, and cannot be unloaded again without unloading the driver - first. (These are limitations of capidrv.) + The devices will show up as CAPI controllers as soon as the + corresponding driver module is loaded, and can then be used with + CAPI 2.0 kernel and user space applications. For user space access, + the module capi.ko must be loaded. Most distributions handle loading and unloading of the various CAPI modules automatically via the command capiinit(1) from the capi4k-utils @@ -173,16 +164,6 @@ GigaSet 307x Device Driver Gigaset drivers because it doesn't support more than one module per driver. -2.4. ISDN4Linux - ---------- - If the driver is compiled without CAPI support (native ISDN4Linux - variant), it registers the device with the legacy ISDN4Linux subsystem - after loading the module. It can then be used with ISDN4Linux - applications only. Most distributions provide some configuration utility - for setting up that subsystem. Otherwise you can use some HOWTOs like - http://www.linuxhaven.de/dlhp/HOWTO/DE-ISDN-HOWTO-5.html - - 2.5. Unimodem mode ------------- In this mode the device works like a modem connected to a serial port @@ -281,8 +262,7 @@ GigaSet 307x Device Driver number. Dialing "***" (three asterisks) calls all extensions simultaneously (global call). - This holds for both CAPI 2.0 and ISDN4Linux applications. Unimodem mode - does not support internal calls. + Unimodem mode does not support internal calls. 2.8. Unregistered Wireless Devices (M101/M105) ----------------------------------------- diff --git a/drivers/isdn/gigaset/Kconfig b/drivers/isdn/gigaset/Kconfig index fe41e9cfb672..c593105b3600 100644 --- a/drivers/isdn/gigaset/Kconfig +++ b/drivers/isdn/gigaset/Kconfig @@ -30,15 +30,6 @@ config GIGASET_CAPI Say N to build the old native ISDN4Linux variant. If unsure, say Y. -config GIGASET_I4L - bool - depends on ISDN_I4L='y'||(ISDN_I4L='m'&&ISDN_DRV_GIGASET='m') - default !GIGASET_CAPI - -config GIGASET_DUMMYLL - bool - default !GIGASET_CAPI&&!GIGASET_I4L - config GIGASET_BASE tristate "Gigaset base station support" depends on USB diff --git a/drivers/isdn/gigaset/Makefile b/drivers/isdn/gigaset/Makefile index ac45a2739f56..9c010891dcd7 100644 --- a/drivers/isdn/gigaset/Makefile +++ b/drivers/isdn/gigaset/Makefile @@ -1,8 +1,12 @@ # SPDX-License-Identifier: GPL-2.0 gigaset-y := common.o interface.o proc.o ev-layer.o asyncdata.o -gigaset-$(CONFIG_GIGASET_CAPI) += capi.o -gigaset-$(CONFIG_GIGASET_I4L) += i4l.o -gigaset-$(CONFIG_GIGASET_DUMMYLL) += dummyll.o + +ifdef CONFIG_GIGASET_CAPI +gigaset-y += capi.o +else +gigaset-y += dummyll.o +endif + usb_gigaset-y := usb-gigaset.o ser_gigaset-y := ser-gigaset.o bas_gigaset-y := bas-gigaset.o isocdata.o diff --git a/drivers/isdn/gigaset/i4l.c b/drivers/isdn/gigaset/i4l.c deleted file mode 100644 index b5b389e95edd..000000000000 --- a/drivers/isdn/gigaset/i4l.c +++ /dev/null @@ -1,695 +0,0 @@ -/* - * Stuff used by all variants of the driver - * - * Copyright (c) 2001 by Stefan Eilers, - * Hansjoerg Lipp , - * Tilman Schmidt . - * - * ===================================================================== - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * ===================================================================== - */ - -#include "gigaset.h" -#include -#include - -#define SBUFSIZE 4096 /* sk_buff payload size */ -#define TRANSBUFSIZE 768 /* bytes per skb for transparent receive */ -#define HW_HDR_LEN 2 /* Header size used to store ack info */ -#define MAX_BUF_SIZE (SBUFSIZE - HW_HDR_LEN) /* max data packet from LL */ - -/* == Handling of I4L IO =====================================================*/ - -/* writebuf_from_LL - * called by LL to transmit data on an open channel - * inserts the buffer data into the send queue and starts the transmission - * Note that this operation must not sleep! - * When the buffer is processed completely, gigaset_skb_sent() should be called. - * parameters: - * driverID driver ID as assigned by LL - * channel channel number - * ack if != 0 LL wants to be notified on completion via - * statcallb(ISDN_STAT_BSENT) - * skb skb containing data to send - * return value: - * number of accepted bytes - * 0 if temporarily unable to accept data (out of buffer space) - * <0 on error (eg. -EINVAL) - */ -static int writebuf_from_LL(int driverID, int channel, int ack, - struct sk_buff *skb) -{ - struct cardstate *cs = gigaset_get_cs_by_id(driverID); - struct bc_state *bcs; - unsigned char *ack_header; - unsigned len; - - if (!cs) { - pr_err("%s: invalid driver ID (%d)\n", __func__, driverID); - return -ENODEV; - } - if (channel < 0 || channel >= cs->channels) { - dev_err(cs->dev, "%s: invalid channel ID (%d)\n", - __func__, channel); - return -ENODEV; - } - bcs = &cs->bcs[channel]; - - /* can only handle linear sk_buffs */ - if (skb_linearize(skb) < 0) { - dev_err(cs->dev, "%s: skb_linearize failed\n", __func__); - return -ENOMEM; - } - len = skb->len; - - gig_dbg(DEBUG_LLDATA, - "Receiving data from LL (id: %d, ch: %d, ack: %d, sz: %d)", - driverID, channel, ack, len); - - if (!len) { - if (ack) - dev_notice(cs->dev, "%s: not ACKing empty packet\n", - __func__); - return 0; - } - if (len > MAX_BUF_SIZE) { - dev_err(cs->dev, "%s: packet too large (%d bytes)\n", - __func__, len); - return -EINVAL; - } - - /* set up acknowledgement header */ - if (skb_headroom(skb) < HW_HDR_LEN) { - /* should never happen */ - dev_err(cs->dev, "%s: insufficient skb headroom\n", __func__); - return -ENOMEM; - } - skb_set_mac_header(skb, -HW_HDR_LEN); - skb->mac_len = HW_HDR_LEN; - ack_header = skb_mac_header(skb); - if (ack) { - ack_header[0] = len & 0xff; - ack_header[1] = len >> 8; - } else { - ack_header[0] = ack_header[1] = 0; - } - gig_dbg(DEBUG_MCMD, "skb: len=%u, ack=%d: %02x %02x", - len, ack, ack_header[0], ack_header[1]); - - /* pass to device-specific module */ - return cs->ops->send_skb(bcs, skb); -} - -/** - * gigaset_skb_sent() - acknowledge sending an skb - * @bcs: B channel descriptor structure. - * @skb: sent data. - * - * Called by hardware module {bas,ser,usb}_gigaset when the data in a - * skb has been successfully sent, for signalling completion to the LL. - */ -void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb) -{ - isdn_if *iif = bcs->cs->iif; - unsigned char *ack_header = skb_mac_header(skb); - unsigned len; - isdn_ctrl response; - - ++bcs->trans_up; - - if (skb->len) - dev_warn(bcs->cs->dev, "%s: skb->len==%d\n", - __func__, skb->len); - - len = ack_header[0] + ((unsigned) ack_header[1] << 8); - if (len) { - gig_dbg(DEBUG_MCMD, "ACKing to LL (id: %d, ch: %d, sz: %u)", - bcs->cs->myid, bcs->channel, len); - - response.driver = bcs->cs->myid; - response.command = ISDN_STAT_BSENT; - response.arg = bcs->channel; - response.parm.length = len; - iif->statcallb(&response); - } -} -EXPORT_SYMBOL_GPL(gigaset_skb_sent); - -/** - * gigaset_skb_rcvd() - pass received skb to LL - * @bcs: B channel descriptor structure. - * @skb: received data. - * - * Called by hardware module {bas,ser,usb}_gigaset when user data has - * been successfully received, for passing to the LL. - * Warning: skb must not be accessed anymore! - */ -void gigaset_skb_rcvd(struct bc_state *bcs, struct sk_buff *skb) -{ - isdn_if *iif = bcs->cs->iif; - - iif->rcvcallb_skb(bcs->cs->myid, bcs->channel, skb); - bcs->trans_down++; -} -EXPORT_SYMBOL_GPL(gigaset_skb_rcvd); - -/** - * gigaset_isdn_rcv_err() - signal receive error - * @bcs: B channel descriptor structure. - * - * Called by hardware module {bas,ser,usb}_gigaset when a receive error - * has occurred, for signalling to the LL. - */ -void gigaset_isdn_rcv_err(struct bc_state *bcs) -{ - isdn_if *iif = bcs->cs->iif; - isdn_ctrl response; - - /* if currently ignoring packets, just count down */ - if (bcs->ignore) { - bcs->ignore--; - return; - } - - /* update statistics */ - bcs->corrupted++; - - /* error -> LL */ - gig_dbg(DEBUG_CMD, "sending L1ERR"); - response.driver = bcs->cs->myid; - response.command = ISDN_STAT_L1ERR; - response.arg = bcs->channel; - response.parm.errcode = ISDN_STAT_L1ERR_RECV; - iif->statcallb(&response); -} -EXPORT_SYMBOL_GPL(gigaset_isdn_rcv_err); - -/* This function will be called by LL to send commands - * NOTE: LL ignores the returned value, for commands other than ISDN_CMD_IOCTL, - * so don't put too much effort into it. - */ -static int command_from_LL(isdn_ctrl *cntrl) -{ - struct cardstate *cs; - struct bc_state *bcs; - int retval = 0; - char **commands; - int ch; - int i; - size_t l; - - gig_dbg(DEBUG_CMD, "driver: %d, command: %d, arg: 0x%lx", - cntrl->driver, cntrl->command, cntrl->arg); - - cs = gigaset_get_cs_by_id(cntrl->driver); - if (cs == NULL) { - pr_err("%s: invalid driver ID (%d)\n", __func__, cntrl->driver); - return -ENODEV; - } - ch = cntrl->arg & 0xff; - - switch (cntrl->command) { - case ISDN_CMD_IOCTL: - dev_warn(cs->dev, "ISDN_CMD_IOCTL not supported\n"); - return -EINVAL; - - case ISDN_CMD_DIAL: - gig_dbg(DEBUG_CMD, - "ISDN_CMD_DIAL (phone: %s, msn: %s, si1: %d, si2: %d)", - cntrl->parm.setup.phone, cntrl->parm.setup.eazmsn, - cntrl->parm.setup.si1, cntrl->parm.setup.si2); - - if (ch >= cs->channels) { - dev_err(cs->dev, - "ISDN_CMD_DIAL: invalid channel (%d)\n", ch); - return -EINVAL; - } - bcs = cs->bcs + ch; - if (gigaset_get_channel(bcs) < 0) { - dev_err(cs->dev, "ISDN_CMD_DIAL: channel not free\n"); - return -EBUSY; - } - switch (bcs->proto2) { - case L2_HDLC: - bcs->rx_bufsize = SBUFSIZE; - break; - default: /* assume transparent */ - bcs->rx_bufsize = TRANSBUFSIZE; - } - dev_kfree_skb(bcs->rx_skb); - gigaset_new_rx_skb(bcs); - - commands = kcalloc(AT_NUM, sizeof(*commands), GFP_ATOMIC); - if (!commands) { - gigaset_free_channel(bcs); - dev_err(cs->dev, "ISDN_CMD_DIAL: out of memory\n"); - return -ENOMEM; - } - - l = 3 + strlen(cntrl->parm.setup.phone); - commands[AT_DIAL] = kmalloc(l, GFP_ATOMIC); - if (!commands[AT_DIAL]) - goto oom; - if (cntrl->parm.setup.phone[0] == '*' && - cntrl->parm.setup.phone[1] == '*') { - /* internal call: translate ** prefix to CTP value */ - commands[AT_TYPE] = kstrdup("^SCTP=0\r", GFP_ATOMIC); - if (!commands[AT_TYPE]) - goto oom; - snprintf(commands[AT_DIAL], l, - "D%s\r", cntrl->parm.setup.phone + 2); - } else { - commands[AT_TYPE] = kstrdup("^SCTP=1\r", GFP_ATOMIC); - if (!commands[AT_TYPE]) - goto oom; - snprintf(commands[AT_DIAL], l, - "D%s\r", cntrl->parm.setup.phone); - } - - l = strlen(cntrl->parm.setup.eazmsn); - if (l) { - l += 8; - commands[AT_MSN] = kmalloc(l, GFP_ATOMIC); - if (!commands[AT_MSN]) - goto oom; - snprintf(commands[AT_MSN], l, "^SMSN=%s\r", - cntrl->parm.setup.eazmsn); - } - - switch (cntrl->parm.setup.si1) { - case 1: /* audio */ - /* BC = 9090A3: 3.1 kHz audio, A-law */ - commands[AT_BC] = kstrdup("^SBC=9090A3\r", GFP_ATOMIC); - if (!commands[AT_BC]) - goto oom; - break; - case 7: /* data */ - default: /* hope the app knows what it is doing */ - /* BC = 8890: unrestricted digital information */ - commands[AT_BC] = kstrdup("^SBC=8890\r", GFP_ATOMIC); - if (!commands[AT_BC]) - goto oom; - } - /* ToDo: other si1 values, inspect si2, set HLC/LLC */ - - commands[AT_PROTO] = kmalloc(9, GFP_ATOMIC); - if (!commands[AT_PROTO]) - goto oom; - snprintf(commands[AT_PROTO], 9, "^SBPR=%u\r", bcs->proto2); - - commands[AT_ISO] = kmalloc(9, GFP_ATOMIC); - if (!commands[AT_ISO]) - goto oom; - snprintf(commands[AT_ISO], 9, "^SISO=%u\r", - (unsigned) bcs->channel + 1); - - if (!gigaset_add_event(cs, &bcs->at_state, EV_DIAL, commands, - bcs->at_state.seq_index, NULL)) { - for (i = 0; i < AT_NUM; ++i) - kfree(commands[i]); - kfree(commands); - gigaset_free_channel(bcs); - return -ENOMEM; - } - gigaset_schedule_event(cs); - break; - case ISDN_CMD_ACCEPTD: - gig_dbg(DEBUG_CMD, "ISDN_CMD_ACCEPTD"); - if (ch >= cs->channels) { - dev_err(cs->dev, - "ISDN_CMD_ACCEPTD: invalid channel (%d)\n", ch); - return -EINVAL; - } - bcs = cs->bcs + ch; - switch (bcs->proto2) { - case L2_HDLC: - bcs->rx_bufsize = SBUFSIZE; - break; - default: /* assume transparent */ - bcs->rx_bufsize = TRANSBUFSIZE; - } - dev_kfree_skb(bcs->rx_skb); - gigaset_new_rx_skb(bcs); - if (!gigaset_add_event(cs, &bcs->at_state, - EV_ACCEPT, NULL, 0, NULL)) - return -ENOMEM; - gigaset_schedule_event(cs); - - break; - case ISDN_CMD_HANGUP: - gig_dbg(DEBUG_CMD, "ISDN_CMD_HANGUP"); - if (ch >= cs->channels) { - dev_err(cs->dev, - "ISDN_CMD_HANGUP: invalid channel (%d)\n", ch); - return -EINVAL; - } - bcs = cs->bcs + ch; - if (!gigaset_add_event(cs, &bcs->at_state, - EV_HUP, NULL, 0, NULL)) - return -ENOMEM; - gigaset_schedule_event(cs); - - break; - case ISDN_CMD_CLREAZ: /* Do not signal incoming signals */ - dev_info(cs->dev, "ignoring ISDN_CMD_CLREAZ\n"); - break; - case ISDN_CMD_SETEAZ: /* Signal incoming calls for given MSN */ - dev_info(cs->dev, "ignoring ISDN_CMD_SETEAZ (%s)\n", - cntrl->parm.num); - break; - case ISDN_CMD_SETL2: /* Set L2 to given protocol */ - if (ch >= cs->channels) { - dev_err(cs->dev, - "ISDN_CMD_SETL2: invalid channel (%d)\n", ch); - return -EINVAL; - } - bcs = cs->bcs + ch; - if (bcs->chstate & CHS_D_UP) { - dev_err(cs->dev, - "ISDN_CMD_SETL2: channel active (%d)\n", ch); - return -EINVAL; - } - switch (cntrl->arg >> 8) { - case ISDN_PROTO_L2_HDLC: - gig_dbg(DEBUG_CMD, "ISDN_CMD_SETL2: setting L2_HDLC"); - bcs->proto2 = L2_HDLC; - break; - case ISDN_PROTO_L2_TRANS: - gig_dbg(DEBUG_CMD, "ISDN_CMD_SETL2: setting L2_VOICE"); - bcs->proto2 = L2_VOICE; - break; - default: - dev_err(cs->dev, - "ISDN_CMD_SETL2: unsupported protocol (%lu)\n", - cntrl->arg >> 8); - return -EINVAL; - } - break; - case ISDN_CMD_SETL3: /* Set L3 to given protocol */ - gig_dbg(DEBUG_CMD, "ISDN_CMD_SETL3"); - if (ch >= cs->channels) { - dev_err(cs->dev, - "ISDN_CMD_SETL3: invalid channel (%d)\n", ch); - return -EINVAL; - } - - if (cntrl->arg >> 8 != ISDN_PROTO_L3_TRANS) { - dev_err(cs->dev, - "ISDN_CMD_SETL3: unsupported protocol (%lu)\n", - cntrl->arg >> 8); - return -EINVAL; - } - - break; - - default: - gig_dbg(DEBUG_CMD, "unknown command %d from LL", - cntrl->command); - return -EINVAL; - } - - return retval; - -oom: - dev_err(bcs->cs->dev, "out of memory\n"); - for (i = 0; i < AT_NUM; ++i) - kfree(commands[i]); - kfree(commands); - gigaset_free_channel(bcs); - return -ENOMEM; -} - -static void gigaset_i4l_cmd(struct cardstate *cs, int cmd) -{ - isdn_if *iif = cs->iif; - isdn_ctrl command; - - command.driver = cs->myid; - command.command = cmd; - command.arg = 0; - iif->statcallb(&command); -} - -static void gigaset_i4l_channel_cmd(struct bc_state *bcs, int cmd) -{ - isdn_if *iif = bcs->cs->iif; - isdn_ctrl command; - - command.driver = bcs->cs->myid; - command.command = cmd; - command.arg = bcs->channel; - iif->statcallb(&command); -} - -/** - * gigaset_isdn_icall() - signal incoming call - * @at_state: connection state structure. - * - * Called by main module to notify the LL that an incoming call has been - * received. @at_state contains the parameters of the call. - * - * Return value: call disposition (ICALL_*) - */ -int gigaset_isdn_icall(struct at_state_t *at_state) -{ - struct cardstate *cs = at_state->cs; - struct bc_state *bcs = at_state->bcs; - isdn_if *iif = cs->iif; - isdn_ctrl response; - int retval; - - /* fill ICALL structure */ - response.parm.setup.si1 = 0; /* default: unknown */ - response.parm.setup.si2 = 0; - response.parm.setup.screen = 0; - response.parm.setup.plan = 0; - if (!at_state->str_var[STR_ZBC]) { - /* no BC (internal call): assume speech, A-law */ - response.parm.setup.si1 = 1; - } else if (!strcmp(at_state->str_var[STR_ZBC], "8890")) { - /* unrestricted digital information */ - response.parm.setup.si1 = 7; - } else if (!strcmp(at_state->str_var[STR_ZBC], "8090A3")) { - /* speech, A-law */ - response.parm.setup.si1 = 1; - } else if (!strcmp(at_state->str_var[STR_ZBC], "9090A3")) { - /* 3,1 kHz audio, A-law */ - response.parm.setup.si1 = 1; - response.parm.setup.si2 = 2; - } else { - dev_warn(cs->dev, "RING ignored - unsupported BC %s\n", - at_state->str_var[STR_ZBC]); - return ICALL_IGNORE; - } - if (at_state->str_var[STR_NMBR]) { - strlcpy(response.parm.setup.phone, at_state->str_var[STR_NMBR], - sizeof response.parm.setup.phone); - } else - response.parm.setup.phone[0] = 0; - if (at_state->str_var[STR_ZCPN]) { - strlcpy(response.parm.setup.eazmsn, at_state->str_var[STR_ZCPN], - sizeof response.parm.setup.eazmsn); - } else - response.parm.setup.eazmsn[0] = 0; - - if (!bcs) { - dev_notice(cs->dev, "no channel for incoming call\n"); - response.command = ISDN_STAT_ICALLW; - response.arg = 0; - } else { - gig_dbg(DEBUG_CMD, "Sending ICALL"); - response.command = ISDN_STAT_ICALL; - response.arg = bcs->channel; - } - response.driver = cs->myid; - retval = iif->statcallb(&response); - gig_dbg(DEBUG_CMD, "Response: %d", retval); - switch (retval) { - case 0: /* no takers */ - return ICALL_IGNORE; - case 1: /* alerting */ - bcs->chstate |= CHS_NOTIFY_LL; - return ICALL_ACCEPT; - case 2: /* reject */ - return ICALL_REJECT; - case 3: /* incomplete */ - dev_warn(cs->dev, - "LL requested unsupported feature: Incomplete Number\n"); - return ICALL_IGNORE; - case 4: /* proceeding */ - /* Gigaset will send ALERTING anyway. - * There doesn't seem to be a way to avoid this. - */ - return ICALL_ACCEPT; - case 5: /* deflect */ - dev_warn(cs->dev, - "LL requested unsupported feature: Call Deflection\n"); - return ICALL_IGNORE; - default: - dev_err(cs->dev, "LL error %d on ICALL\n", retval); - return ICALL_IGNORE; - } -} - -/** - * gigaset_isdn_connD() - signal D channel connect - * @bcs: B channel descriptor structure. - * - * Called by main module to notify the LL that the D channel connection has - * been established. - */ -void gigaset_isdn_connD(struct bc_state *bcs) -{ - gig_dbg(DEBUG_CMD, "sending DCONN"); - gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DCONN); -} - -/** - * gigaset_isdn_hupD() - signal D channel hangup - * @bcs: B channel descriptor structure. - * - * Called by main module to notify the LL that the D channel connection has - * been shut down. - */ -void gigaset_isdn_hupD(struct bc_state *bcs) -{ - gig_dbg(DEBUG_CMD, "sending DHUP"); - gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DHUP); -} - -/** - * gigaset_isdn_connB() - signal B channel connect - * @bcs: B channel descriptor structure. - * - * Called by main module to notify the LL that the B channel connection has - * been established. - */ -void gigaset_isdn_connB(struct bc_state *bcs) -{ - gig_dbg(DEBUG_CMD, "sending BCONN"); - gigaset_i4l_channel_cmd(bcs, ISDN_STAT_BCONN); -} - -/** - * gigaset_isdn_hupB() - signal B channel hangup - * @bcs: B channel descriptor structure. - * - * Called by main module to notify the LL that the B channel connection has - * been shut down. - */ -void gigaset_isdn_hupB(struct bc_state *bcs) -{ - gig_dbg(DEBUG_CMD, "sending BHUP"); - gigaset_i4l_channel_cmd(bcs, ISDN_STAT_BHUP); -} - -/** - * gigaset_isdn_start() - signal device availability - * @cs: device descriptor structure. - * - * Called by main module to notify the LL that the device is available for - * use. - */ -void gigaset_isdn_start(struct cardstate *cs) -{ - gig_dbg(DEBUG_CMD, "sending RUN"); - gigaset_i4l_cmd(cs, ISDN_STAT_RUN); -} - -/** - * gigaset_isdn_stop() - signal device unavailability - * @cs: device descriptor structure. - * - * Called by main module to notify the LL that the device is no longer - * available for use. - */ -void gigaset_isdn_stop(struct cardstate *cs) -{ - gig_dbg(DEBUG_CMD, "sending STOP"); - gigaset_i4l_cmd(cs, ISDN_STAT_STOP); -} - -/** - * gigaset_isdn_regdev() - register to LL - * @cs: device descriptor structure. - * @isdnid: device name. - * - * Return value: 0 on success, error code < 0 on failure - */ -int gigaset_isdn_regdev(struct cardstate *cs, const char *isdnid) -{ - isdn_if *iif; - - iif = kmalloc(sizeof *iif, GFP_KERNEL); - if (!iif) { - pr_err("out of memory\n"); - return -ENOMEM; - } - - if (snprintf(iif->id, sizeof iif->id, "%s_%u", isdnid, cs->minor_index) - >= sizeof iif->id) { - pr_err("ID too long: %s\n", isdnid); - kfree(iif); - return -EINVAL; - } - - iif->owner = THIS_MODULE; - iif->channels = cs->channels; - iif->maxbufsize = MAX_BUF_SIZE; - iif->features = ISDN_FEATURE_L2_TRANS | - ISDN_FEATURE_L2_HDLC | - ISDN_FEATURE_L2_X75I | - ISDN_FEATURE_L3_TRANS | - ISDN_FEATURE_P_EURO; - iif->hl_hdrlen = HW_HDR_LEN; /* Area for storing ack */ - iif->command = command_from_LL; - iif->writebuf_skb = writebuf_from_LL; - iif->writecmd = NULL; /* Don't support isdnctrl */ - iif->readstat = NULL; /* Don't support isdnctrl */ - iif->rcvcallb_skb = NULL; /* Will be set by LL */ - iif->statcallb = NULL; /* Will be set by LL */ - - if (!register_isdn(iif)) { - pr_err("register_isdn failed\n"); - kfree(iif); - return -EINVAL; - } - - cs->iif = iif; - cs->myid = iif->channels; /* Set my device id */ - cs->hw_hdr_len = HW_HDR_LEN; - return 0; -} - -/** - * gigaset_isdn_unregdev() - unregister device from LL - * @cs: device descriptor structure. - */ -void gigaset_isdn_unregdev(struct cardstate *cs) -{ - gig_dbg(DEBUG_CMD, "sending UNLOAD"); - gigaset_i4l_cmd(cs, ISDN_STAT_UNLOAD); - kfree(cs->iif); - cs->iif = NULL; -} - -/** - * gigaset_isdn_regdrv() - register driver to LL - */ -void gigaset_isdn_regdrv(void) -{ - pr_info("ISDN4Linux interface\n"); - /* nothing to do */ -} - -/** - * gigaset_isdn_unregdrv() - unregister driver from LL - */ -void gigaset_isdn_unregdrv(void) -{ - /* nothing to do */ -} -- 2.30.2