From 906c1ff44a81aaad96a9feb40ea13d73bbf3662a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 19 May 2008 01:15:13 +0900 Subject: [PATCH] sata_sil24: don't use NCQ if marvell 4140 PMP is attached When 4140 PMP is attached to sil24, NCQ commands to fan out port 1 and 2 (0 based) often stall if commands are in progress to other ports. I've tried a number of things but can't tell what's going on. It never happens w/ ahci and reportedly sata_mv which can issue NCQ commands to multiple devices simultaneously like sil24 does. Disable NCQ for devices behind 4140 PMP for the time being. Signed-off-by: Tejun Heo Cc: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_sil24.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 27a110110077..8ee6b5b4ede7 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -899,14 +899,25 @@ static bool sil24_qc_fill_rtf(struct ata_queued_cmd *qc) static void sil24_pmp_attach(struct ata_port *ap) { + u32 *gscr = ap->link.device->gscr; + sil24_config_pmp(ap, 1); sil24_init_port(ap); + + if (sata_pmp_gscr_vendor(gscr) == 0x11ab && + sata_pmp_gscr_devid(gscr) == 0x4140) { + ata_port_printk(ap, KERN_INFO, + "disabling NCQ support due to sil24-mv4140 quirk\n"); + ap->flags &= ~ATA_FLAG_NCQ; + } } static void sil24_pmp_detach(struct ata_port *ap) { sil24_init_port(ap); sil24_config_pmp(ap, 0); + + ap->flags |= ATA_FLAG_NCQ; } static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class, -- 2.30.2