From 926848220e601338c918bdbde1d3fe7e63c8c04d Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Fri, 12 Apr 2013 13:39:51 -0700 Subject: [PATCH] staging: comedi: plx9052: tidy up the register defines The PLX INTCSR register defines are a bit wordy and many of them are not used anywhere. For aesthetic reasons, remove all the *_MASK and *_DISABLED defines and rename the remaining bit defines so they are not as wordy. Convert all the bit defines to bit shifts. Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/amplc_pc236.c | 36 +++++----- drivers/staging/comedi/drivers/cb_pcimdas.c | 1 + drivers/staging/comedi/drivers/plx9052.h | 69 +++++--------------- 3 files changed, 32 insertions(+), 74 deletions(-) diff --git a/drivers/staging/comedi/drivers/amplc_pc236.c b/drivers/staging/comedi/drivers/amplc_pc236.c index 441e27361c5e..e789383ce49d 100644 --- a/drivers/staging/comedi/drivers/amplc_pc236.c +++ b/drivers/staging/comedi/drivers/amplc_pc236.c @@ -75,23 +75,19 @@ unused. #define PC236_IO_SIZE 4 #define PC236_LCR_IO_SIZE 128 -/* - * INTCSR values for PCI236. - */ -/* Disable interrupt, also clear any interrupt there */ -#define PCI236_INTR_DISABLE (PLX9052_INTCSR_LI1ENAB_DISABLED \ - | PLX9052_INTCSR_LI1POL_HIGH \ - | PLX9052_INTCSR_LI2POL_HIGH \ - | PLX9052_INTCSR_PCIENAB_DISABLED \ - | PLX9052_INTCSR_LI1SEL_EDGE \ - | PLX9052_INTCSR_LI1CLRINT_ASSERTED) -/* Enable interrupt, also clear any interrupt there. */ -#define PCI236_INTR_ENABLE (PLX9052_INTCSR_LI1ENAB_ENABLED \ - | PLX9052_INTCSR_LI1POL_HIGH \ - | PLX9052_INTCSR_LI2POL_HIGH \ - | PLX9052_INTCSR_PCIENAB_ENABLED \ - | PLX9052_INTCSR_LI1SEL_EDGE \ - | PLX9052_INTCSR_LI1CLRINT_ASSERTED) +/* Disable, and clear, interrupts */ +#define PCI236_INTR_DISABLE (PLX9052_INTCSR_LI1POL | \ + PLX9052_INTCSR_LI2POL | \ + PLX9052_INTCSR_LI1SEL | \ + PLX9052_INTCSR_LI1CLRINT) + +/* Enable, and clear, interrupts */ +#define PCI236_INTR_ENABLE (PLX9052_INTCSR_LI1ENAB | \ + PLX9052_INTCSR_LI1POL | \ + PLX9052_INTCSR_LI2POL | \ + PLX9052_INTCSR_PCIENAB | \ + PLX9052_INTCSR_LI1SEL | \ + PLX9052_INTCSR_LI1CLRINT) /* * Board descriptions for Amplicon PC36AT and PCI236. @@ -257,14 +253,14 @@ static int pc236_intr_check(struct comedi_device *dev) struct pc236_private *devpriv = dev->private; int retval = 0; unsigned long flags; + unsigned int intcsr; spin_lock_irqsave(&dev->spinlock, flags); if (devpriv->enable_irq) { retval = 1; if (is_pci_board(thisboard)) { - if ((inl(devpriv->lcr_iobase + PLX9052_INTCSR) - & PLX9052_INTCSR_LI1STAT_MASK) - == PLX9052_INTCSR_LI1STAT_INACTIVE) { + intcsr = inl(devpriv->lcr_iobase + PLX9052_INTCSR); + if (!(intcsr & PLX9052_INTCSR_LI1STAT)) { retval = 0; } else { /* Clear interrupt and keep it enabled. */ diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c index 31273f4d24a1..29813c9d4a2a 100644 --- a/drivers/staging/comedi/drivers/cb_pcimdas.c +++ b/drivers/staging/comedi/drivers/cb_pcimdas.c @@ -46,6 +46,7 @@ See http://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf for more details. #include "../comedidev.h" +#include "plx9052.h" #include "8255.h" /* #define CBPCIMDAS_DEBUG */ diff --git a/drivers/staging/comedi/drivers/plx9052.h b/drivers/staging/comedi/drivers/plx9052.h index 5894739ff426..ab93b0b95fb7 100644 --- a/drivers/staging/comedi/drivers/plx9052.h +++ b/drivers/staging/comedi/drivers/plx9052.h @@ -27,60 +27,21 @@ #define _PLX9052_H_ /* - * PLX PCI9052 INTCSR register. + * INTCSR - Interrupt Control/Status register */ -#define PLX9052_INTCSR 0x4C /* Offset in Local Configuration Registers */ -/* Local Interrupt 1 Enable */ -#define PLX9052_INTCSR_LI1ENAB_MASK 0x0001 -#define PLX9052_INTCSR_LI1ENAB_DISABLED 0x0000 -#define PLX9052_INTCSR_LI1ENAB_ENABLED 0x0001 -/* Local Interrupt 1 Polarity */ -#define PLX9052_INTCSR_LI1POL_MASK 0x0002 -#define PLX9052_INTCSR_LI1POL_LOW 0x0000 -#define PLX9052_INTCSR_LI1POL_HIGH 0x0002 -/* Local Interrupt 1 Status (read-only) */ -#define PLX9052_INTCSR_LI1STAT_MASK 0x0004 -#define PLX9052_INTCSR_LI1STAT_INACTIVE 0x0000 -#define PLX9052_INTCSR_LI1STAT_ACTIVE 0x0004 -/* Local Interrupt 2 Enable */ -#define PLX9052_INTCSR_LI2ENAB_MASK 0x0008 -#define PLX9052_INTCSR_LI2ENAB_DISABLED 0x0000 -#define PLX9052_INTCSR_LI2ENAB_ENABLED 0x0008 -/* Local Interrupt 2 Polarity */ -#define PLX9052_INTCSR_LI2POL_MASK 0x0010 -#define PLX9052_INTCSR_LI2POL_LOW 0x0000 -#define PLX9052_INTCSR_LI2POL_HIGH 0x0010 -/* Local Interrupt 2 Status (read-only) */ -#define PLX9052_INTCSR_LI2STAT_MASK 0x0020 -#define PLX9052_INTCSR_LI2STAT_INACTIVE 0x0000 -#define PLX9052_INTCSR_LI2STAT_ACTIVE 0x0020 -/* PCI Interrupt Enable */ -#define PLX9052_INTCSR_PCIENAB_MASK 0x0040 -#define PLX9052_INTCSR_PCIENAB_DISABLED 0x0000 -#define PLX9052_INTCSR_PCIENAB_ENABLED 0x0040 -/* Software Interrupt */ -#define PLX9052_INTCSR_SOFTINT_MASK 0x0080 -#define PLX9052_INTCSR_SOFTINT_UNASSERTED 0x0000 -#define PLX9052_INTCSR_SOFTINT_ASSERTED 0x0080 -/* Local Interrupt 1 Select Enable */ -#define PLX9052_INTCSR_LI1SEL_MASK 0x0100 -#define PLX9052_INTCSR_LI1SEL_LEVEL 0x0000 -#define PLX9052_INTCSR_LI1SEL_EDGE 0x0100 -/* Local Interrupt 2 Select Enable */ -#define PLX9052_INTCSR_LI2SEL_MASK 0x0200 -#define PLX9052_INTCSR_LI2SEL_LEVEL 0x0000 -#define PLX9052_INTCSR_LI2SEL_EDGE 0x0200 -/* Local Edge Triggerable Interrupt 1 Clear Bit */ -#define PLX9052_INTCSR_LI1CLRINT_MASK 0x0400 -#define PLX9052_INTCSR_LI1CLRINT_UNASSERTED 0x0000 -#define PLX9052_INTCSR_LI1CLRINT_ASSERTED 0x0400 -/* Local Edge Triggerable Interrupt 2 Clear Bit */ -#define PLX9052_INTCSR_LI2CLRINT_MASK 0x0800 -#define PLX9052_INTCSR_LI2CLRINT_UNASSERTED 0x0000 -#define PLX9052_INTCSR_LI2CLRINT_ASSERTED 0x0800 -/* ISA Interface Mode Enable (read-only over PCI bus) */ -#define PLX9052_INTCSR_ISAMODE_MASK 0x1000 -#define PLX9052_INTCSR_ISAMODE_DISABLED 0x0000 -#define PLX9052_INTCSR_ISAMODE_ENABLED 0x1000 +#define PLX9052_INTCSR 0x4c +#define PLX9052_INTCSR_LI1ENAB (1 << 0) /* LI1 enabled */ +#define PLX9052_INTCSR_LI1POL (1 << 1) /* LI1 active high */ +#define PLX9052_INTCSR_LI1STAT (1 << 2) /* LI1 active */ +#define PLX9052_INTCSR_LI2ENAB (1 << 3) /* LI2 enabled */ +#define PLX9052_INTCSR_LI2POL (1 << 4) /* LI2 active high */ +#define PLX9052_INTCSR_LI2STAT (1 << 5) /* LI2 active */ +#define PLX9052_INTCSR_PCIENAB (1 << 6) /* PCIINT enabled */ +#define PLX9052_INTCSR_SOFTINT (1 << 7) /* generate soft int */ +#define PLX9052_INTCSR_LI1SEL (1 << 8) /* LI1 edge */ +#define PLX9052_INTCSR_LI2SEL (1 << 9) /* LI2 edge */ +#define PLX9052_INTCSR_LI1CLRINT (1 << 10) /* LI1 clear int */ +#define PLX9052_INTCSR_LI2CLRINT (1 << 11) /* LI2 clear int */ +#define PLX9052_INTCSR_ISAMODE (1 << 12) /* ISA interface mode */ #endif /* _PLX9052_H_ */ -- 2.30.2