From 93cbfc709047a5bc3f8d86e0b55079b5077c8e00 Mon Sep 17 00:00:00 2001 From: Yanir Lubetkin Date: Wed, 10 Jun 2015 01:16:01 +0300 Subject: [PATCH] e1000e: i219 - Increase minimum FIFO read/write min gap Due to clocking changes in the Skylake platform, there was i219 data corruption. To work around this, HW team reported the need to increase the minimum gap between the PHY FIFO read and write pointers. Signed-off-by: Yanir Lubetkin Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/ich8lan.c | 46 +++++++++++++++++++++ 1 file changed, 46 insertions(+) diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 983f5bf07bc4..3f5b8cb48512 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1437,6 +1437,52 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) if (ret_val) return ret_val; + + if (hw->mac.type == e1000_pch_spt) { + u16 data; + u16 ptr_gap; + + if (speed == SPEED_1000) { + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1e_rphy_locked(hw, + PHY_REG(776, 20), + &data); + if (ret_val) { + hw->phy.ops.release(hw); + return ret_val; + } + + ptr_gap = (data & (0x3FF << 2)) >> 2; + if (ptr_gap < 0x18) { + data &= ~(0x3FF << 2); + data |= (0x18 << 2); + ret_val = + e1e_wphy_locked(hw, + PHY_REG(776, 20), + data); + } + hw->phy.ops.release(hw); + if (ret_val) + return ret_val; + } + } + } + + /* I217 Packet Loss issue: + * ensure that FEXTNVM4 Beacon Duration is set correctly + * on power up. + * Set the Beacon Duration for I217 to 8 usec + */ + if ((hw->mac.type == e1000_pch_lpt) || (hw->mac.type == e1000_pch_spt)) { + u32 mac_reg; + + mac_reg = er32(FEXTNVM4); + mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK; + mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC; + ew32(FEXTNVM4, mac_reg); } /* Work-around I218 hang issue */ -- 2.30.2