From 97738374a310b9116f9c33832737e517226d3722 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 7 Jun 2018 08:04:21 +1000 Subject: [PATCH] staging: mt7621-dts: correct various clock frequencies. The MT7621 documentation says that the sys clock - also known as OCP clock for the Open Core Protocol - can be configured to 1/3 or 1/4 of the CPU clock. Testing on my hardware, using the fact that the SPI clock is based on the OCP clock and measuring transfer rates, shows a clock of a little over 200MHz with a CPU clock of 900MHz. So assume 1/4 is the default. Also, the nor-flash in the gbpc1 is documented as accepting 50MHz for request requests, and higher for other requests. So set maximum to 50MHz. Signed-off-by: NeilBrown Signed-off-by: Greg Kroah-Hartman --- drivers/staging/mt7621-dts/gbpc1.dts | 5 +++-- drivers/staging/mt7621-dts/mt7621.dtsi | 4 ++-- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/staging/mt7621-dts/gbpc1.dts b/drivers/staging/mt7621-dts/gbpc1.dts index 6b13d85d9d34..47bcee51e016 100644 --- a/drivers/staging/mt7621-dts/gbpc1.dts +++ b/drivers/staging/mt7621-dts/gbpc1.dts @@ -74,7 +74,7 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <10000000>; + spi-max-frequency = <50000000>; partition@0 { label = "u-boot"; @@ -104,7 +104,8 @@ &sysclock { compatible = "fixed-clock"; - clock-frequency = <90000000>; + /* This is normally 1/4 of cpuclock */ + clock-frequency = <225000000>; }; &cpuclock { diff --git a/drivers/staging/mt7621-dts/mt7621.dtsi b/drivers/staging/mt7621-dts/mt7621.dtsi index eb3966b7f033..4a58e94c2060 100644 --- a/drivers/staging/mt7621-dts/mt7621.dtsi +++ b/drivers/staging/mt7621-dts/mt7621.dtsi @@ -38,8 +38,8 @@ #clock-cells = <0>; compatible = "fixed-clock"; - /* FIXME: there should be way to detect this */ - clock-frequency = <50000000>; + /* This is normally 1/4 of cpuclock */ + clock-frequency = <220000000>; }; palmbus: palmbus@1E000000 { -- 2.30.2