From 9876879fce3081cd9f3f2b9e995954d423bcd863 Mon Sep 17 00:00:00 2001 From: Barak Witkowski Date: Tue, 19 Jun 2012 07:48:31 +0000 Subject: [PATCH] bnx2x: Support DCBX for all functions In multi-function device, allow configuring dcbx admin params from all drivers on a single physical port. Signed-off-by: Barak Witkowski Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 1 + .../net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 6 ++-- .../net/ethernet/broadcom/bnx2x/bnx2x_cmn.h | 2 +- .../net/ethernet/broadcom/bnx2x/bnx2x_dcb.c | 30 +++++++++++++------ .../net/ethernet/broadcom/bnx2x/bnx2x_hsi.h | 1 + .../net/ethernet/broadcom/bnx2x/bnx2x_main.c | 2 ++ .../net/ethernet/broadcom/bnx2x/bnx2x_reg.h | 1 + 7 files changed, 31 insertions(+), 12 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index fcc3b26c1c60..fa061cf60fee 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1318,6 +1318,7 @@ struct bnx2x { #define NO_FCOE_FLAG (1 << 15) #define BC_SUPPORTS_PFC_STATS (1 << 17) #define USING_SINGLE_MSIX_FLAG (1 << 20) +#define BC_SUPPORTS_DCBX_MSG_NON_PMF (1 << 21) #define NO_ISCSI(bp) ((bp)->flags & NO_ISCSI_FLAG) #define NO_ISCSI_OOO(bp) ((bp)->flags & NO_ISCSI_OOO_FLAG) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 829befbc20a5..00951b3aa62b 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -2274,8 +2274,10 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) return -EBUSY; } - if (bp->state != BNX2X_STATE_DIAG) - bnx2x_dcbx_init(bp); + /* If PMF - send ADMIN DCBX msg to MFW to initiate DCBX FSM */ + if (bp->port.pmf && (bp->state != BNX2X_STATE_DIAG)) + bnx2x_dcbx_init(bp, false); + return 0; #ifndef BNX2X_STOP_ON_ERROR diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index 12dbbc4ff9bc..daa894bd772a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -418,7 +418,7 @@ void bnx2x_ilt_set_info(struct bnx2x *bp); * * @bp: driver handle */ -void bnx2x_dcbx_init(struct bnx2x *bp); +void bnx2x_dcbx_init(struct bnx2x *bp, bool update_shmem); /** * bnx2x_set_power_state - set power state to the requested value. diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c index 4f9244bd7530..8a73374e52a7 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c @@ -972,23 +972,26 @@ void bnx2x_dcbx_init_params(struct bnx2x *bp) bp->dcbx_config_params.admin_default_priority = 0; } -void bnx2x_dcbx_init(struct bnx2x *bp) +void bnx2x_dcbx_init(struct bnx2x *bp, bool update_shmem) { u32 dcbx_lldp_params_offset = SHMEM_LLDP_DCBX_PARAMS_NONE; + /* only PMF can send ADMIN msg to MFW in old MFW versions */ + if ((!bp->port.pmf) && (!(bp->flags & BC_SUPPORTS_DCBX_MSG_NON_PMF))) + return; + if (bp->dcbx_enabled <= 0) return; /* validate: * chip of good for dcbx version, * dcb is wanted - * the function is pmf * shmem2 contains DCBX support fields */ DP(BNX2X_MSG_DCB, "dcb_state %d bp->port.pmf %d\n", bp->dcb_state, bp->port.pmf); - if (bp->dcb_state == BNX2X_DCB_STATE_ON && bp->port.pmf && + if (bp->dcb_state == BNX2X_DCB_STATE_ON && SHMEM2_HAS(bp, dcbx_lldp_params_offset)) { dcbx_lldp_params_offset = SHMEM2_RD(bp, dcbx_lldp_params_offset); @@ -999,12 +1002,23 @@ void bnx2x_dcbx_init(struct bnx2x *bp) bnx2x_update_drv_flags(bp, 1 << DRV_FLAGS_DCB_CONFIGURED, 0); if (SHMEM_LLDP_DCBX_PARAMS_NONE != dcbx_lldp_params_offset) { - bnx2x_dcbx_admin_mib_updated_params(bp, - dcbx_lldp_params_offset); + /* need HW lock to avoid scenario of two drivers + * writing in parallel to shmem + */ + bnx2x_acquire_hw_lock(bp, + HW_LOCK_RESOURCE_DCBX_ADMIN_MIB); + if (update_shmem) + bnx2x_dcbx_admin_mib_updated_params(bp, + dcbx_lldp_params_offset); /* Let HW start negotiation */ bnx2x_fw_command(bp, DRV_MSG_CODE_DCBX_ADMIN_PMF_MSG, 0); + /* release HW lock only after MFW acks that it finished + * reading values from shmem + */ + bnx2x_release_hw_lock(bp, + HW_LOCK_RESOURCE_DCBX_ADMIN_MIB); } } } @@ -2063,10 +2077,8 @@ static u8 bnx2x_dcbnl_set_all(struct net_device *netdev) "Handling parity error recovery. Try again later\n"); return 1; } - if (netif_running(bp->dev)) { - bnx2x_nic_unload(bp, UNLOAD_NORMAL); - rc = bnx2x_nic_load(bp, LOAD_NORMAL); - } + if (netif_running(bp->dev)) + bnx2x_dcbx_init(bp, true); DP(BNX2X_MSG_DCB, "set_dcbx_params done (%d)\n", rc); if (rc) return 1; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h index c61aa37298a3..6b776309e0a1 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h @@ -1253,6 +1253,7 @@ struct drv_func_mb { #define DRV_MSG_CODE_DCBX_ADMIN_PMF_MSG 0xb0000000 #define DRV_MSG_CODE_DCBX_PMF_DRV_OK 0xb2000000 + #define REQ_BC_VER_4_DCBX_ADMIN_MSG_NON_PMF 0x00070401 #define DRV_MSG_CODE_VF_DISABLED_DONE 0xc0000000 diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 08c8d7d5e893..8ddc78e0d945 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -9732,6 +9732,8 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp) bp->flags |= (val >= REQ_BC_VER_4_PFC_STATS_SUPPORTED) ? BC_SUPPORTS_PFC_STATS : 0; + bp->flags |= (val >= REQ_BC_VER_4_DCBX_ADMIN_MSG_NON_PMF) ? + BC_SUPPORTS_DCBX_MSG_NON_PMF : 0; boot_mode = SHMEM_RD(bp, dev_info.port_feature_config[BP_PORT(bp)].mba_config) & PORT_FEATURE_MBA_BOOT_AGENT_TYPE_MASK; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index bfef98f666c9..a78e35683b03 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -5913,6 +5913,7 @@ #define MISC_REGISTERS_SPIO_OUTPUT_LOW 0 #define MISC_REGISTERS_SPIO_SET_POS 8 #define HW_LOCK_MAX_RESOURCE_VALUE 31 +#define HW_LOCK_RESOURCE_DCBX_ADMIN_MIB 13 #define HW_LOCK_RESOURCE_DRV_FLAGS 10 #define HW_LOCK_RESOURCE_GPIO 1 #define HW_LOCK_RESOURCE_MDIO 0 -- 2.30.2