From 9beb0de9adc789a7da22dac811b03ff342b27b63 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Tue, 31 Mar 2009 23:58:49 -0300 Subject: [PATCH] V4L/DVB (11342): au0828: better document i2c registers Change the #define entries for the i2c registers to be more meaningful, and document the valid values for the registers. Note that this changeset makes *no* functional changes to the code. Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/au0828/au0828-i2c.c | 62 ++++++++++++++++--------- drivers/media/video/au0828/au0828-reg.h | 35 +++++++++++--- 2 files changed, 69 insertions(+), 28 deletions(-) diff --git a/drivers/media/video/au0828/au0828-i2c.c b/drivers/media/video/au0828/au0828-i2c.c index f9a958d0aef1..27dcfc69cd80 100644 --- a/drivers/media/video/au0828/au0828-i2c.c +++ b/drivers/media/video/au0828/au0828-i2c.c @@ -39,13 +39,15 @@ MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time"); static inline int i2c_slave_did_write_ack(struct i2c_adapter *i2c_adap) { struct au0828_dev *dev = i2c_adap->algo_data; - return au0828_read(dev, REG_201) & 0x08 ? 0 : 1; + return au0828_read(dev, AU0828_I2C_STATUS_201) & + AU0828_I2C_STATUS_NO_WRITE_ACK ? 0 : 1; } static inline int i2c_slave_did_read_ack(struct i2c_adapter *i2c_adap) { struct au0828_dev *dev = i2c_adap->algo_data; - return au0828_read(dev, REG_201) & 0x02 ? 0 : 1; + return au0828_read(dev, AU0828_I2C_STATUS_201) & + AU0828_I2C_STATUS_NO_READ_ACK ? 0 : 1; } static int i2c_wait_read_ack(struct i2c_adapter *i2c_adap) @@ -67,7 +69,8 @@ static int i2c_wait_read_ack(struct i2c_adapter *i2c_adap) static inline int i2c_is_read_busy(struct i2c_adapter *i2c_adap) { struct au0828_dev *dev = i2c_adap->algo_data; - return au0828_read(dev, REG_201) & 0x01 ? 0 : 1; + return au0828_read(dev, AU0828_I2C_STATUS_201) & + AU0828_I2C_STATUS_READ_DONE ? 0 : 1; } static int i2c_wait_read_done(struct i2c_adapter *i2c_adap) @@ -89,7 +92,8 @@ static int i2c_wait_read_done(struct i2c_adapter *i2c_adap) static inline int i2c_is_write_done(struct i2c_adapter *i2c_adap) { struct au0828_dev *dev = i2c_adap->algo_data; - return au0828_read(dev, REG_201) & 0x04 ? 1 : 0; + return au0828_read(dev, AU0828_I2C_STATUS_201) & + AU0828_I2C_STATUS_WRITE_DONE ? 1 : 0; } static int i2c_wait_write_done(struct i2c_adapter *i2c_adap) @@ -111,7 +115,8 @@ static int i2c_wait_write_done(struct i2c_adapter *i2c_adap) static inline int i2c_is_busy(struct i2c_adapter *i2c_adap) { struct au0828_dev *dev = i2c_adap->algo_data; - return au0828_read(dev, REG_201) & 0x10 ? 1 : 0; + return au0828_read(dev, AU0828_I2C_STATUS_201) & + AU0828_I2C_STATUS_BUSY ? 1 : 0; } static int i2c_wait_done(struct i2c_adapter *i2c_adap) @@ -139,19 +144,21 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap, dprintk(4, "%s()\n", __func__); - au0828_write(dev, REG_2FF, 0x01); + au0828_write(dev, AU0828_I2C_MULTIBYTE_MODE_2FF, 0x01); /* FIXME: There is a problem with i2c communications with xc5000 that requires us to slow down the i2c clock until we have a better strategy (such as using the secondary i2c bus to do firmware loading */ if ((msg->addr << 1) == 0xc2) - au0828_write(dev, REG_202, 0x40); + au0828_write(dev, AU0828_I2C_CLK_DIVIDER_202, + AU0828_I2C_CLK_30KHZ); else - au0828_write(dev, REG_202, 0x07); + au0828_write(dev, AU0828_I2C_CLK_DIVIDER_202, + AU0828_I2C_CLK_250KHZ); /* Hardware needs 8 bit addresses */ - au0828_write(dev, REG_203, msg->addr << 1); + au0828_write(dev, AU0828_I2C_DEST_ADDR_203, msg->addr << 1); dprintk(4, "SEND: %02x\n", msg->addr); @@ -163,7 +170,9 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap, actual bytes to the bus, just do a read check. This is consistent with how I saw i2c device checking done in the USB trace of the Windows driver */ - au0828_write(dev, REG_200, 0x20); + au0828_write(dev, AU0828_I2C_TRIGGER_200, + AU0828_I2C_TRIGGER_READ); + if (!i2c_wait_done(i2c_adap)) return -EIO; @@ -177,7 +186,7 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap, dprintk(4, " %02x\n", msg->buf[i]); - au0828_write(dev, REG_205, msg->buf[i]); + au0828_write(dev, AU0828_I2C_WRITE_FIFO_205, msg->buf[i]); strobe++; i++; @@ -186,9 +195,12 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap, /* Strobe the byte into the bus */ if (i < msg->len) - au0828_write(dev, REG_200, 0x41); + au0828_write(dev, AU0828_I2C_TRIGGER_200, + AU0828_I2C_TRIGGER_WRITE | + AU0828_I2C_TRIGGER_HOLD); else - au0828_write(dev, REG_200, 0x01); + au0828_write(dev, AU0828_I2C_TRIGGER_200, + AU0828_I2C_TRIGGER_WRITE); /* Reset strobe trigger */ strobe = 0; @@ -216,25 +228,29 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap, dprintk(4, "%s()\n", __func__); - au0828_write(dev, REG_2FF, 0x01); + au0828_write(dev, AU0828_I2C_MULTIBYTE_MODE_2FF, 0x01); /* FIXME: There is a problem with i2c communications with xc5000 that requires us to slow down the i2c clock until we have a better strategy (such as using the secondary i2c bus to do firmware loading */ if ((msg->addr << 1) == 0xc2) - au0828_write(dev, REG_202, 0x40); + au0828_write(dev, AU0828_I2C_CLK_DIVIDER_202, + AU0828_I2C_CLK_30KHZ); else - au0828_write(dev, REG_202, 0x07); + au0828_write(dev, AU0828_I2C_CLK_DIVIDER_202, + AU0828_I2C_CLK_250KHZ); /* Hardware needs 8 bit addresses */ - au0828_write(dev, REG_203, msg->addr << 1); + au0828_write(dev, AU0828_I2C_DEST_ADDR_203, msg->addr << 1); dprintk(4, " RECV:\n"); /* Deal with i2c_scan */ if (msg->len == 0) { - au0828_write(dev, REG_200, 0x20); + au0828_write(dev, AU0828_I2C_TRIGGER_200, + AU0828_I2C_TRIGGER_READ); + if (i2c_wait_read_ack(i2c_adap)) return -EIO; return 0; @@ -245,14 +261,18 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap, i++; if (i < msg->len) - au0828_write(dev, REG_200, 0x60); + au0828_write(dev, AU0828_I2C_TRIGGER_200, + AU0828_I2C_TRIGGER_READ | + AU0828_I2C_TRIGGER_HOLD); else - au0828_write(dev, REG_200, 0x20); + au0828_write(dev, AU0828_I2C_TRIGGER_200, + AU0828_I2C_TRIGGER_READ); if (!i2c_wait_read_done(i2c_adap)) return -EIO; - msg->buf[i-1] = au0828_read(dev, REG_209) & 0xff; + msg->buf[i-1] = au0828_read(dev, AU0828_I2C_READ_FIFO_209) & + 0xff; dprintk(4, " %02x\n", msg->buf[i-1]); } diff --git a/drivers/media/video/au0828/au0828-reg.h b/drivers/media/video/au0828/au0828-reg.h index b15e4a3b6fc0..c39f3d2b721e 100644 --- a/drivers/media/video/au0828/au0828-reg.h +++ b/drivers/media/video/au0828/au0828-reg.h @@ -30,15 +30,36 @@ #define AU0828_SENSORCTRL_100 0x100 #define AU0828_SENSORCTRL_VBI_103 0x103 -#define REG_200 0x200 -#define REG_201 0x201 -#define REG_202 0x202 -#define REG_203 0x203 -#define REG_205 0x205 -#define REG_209 0x209 -#define REG_2FF 0x2ff +/* I2C registers */ +#define AU0828_I2C_TRIGGER_200 0x200 +#define AU0828_I2C_STATUS_201 0x201 +#define AU0828_I2C_CLK_DIVIDER_202 0x202 +#define AU0828_I2C_DEST_ADDR_203 0x203 +#define AU0828_I2C_WRITE_FIFO_205 0x205 +#define AU0828_I2C_READ_FIFO_209 0x209 +#define AU0828_I2C_MULTIBYTE_MODE_2FF 0x2ff /* Audio registers */ #define AU0828_AUDIOCTRL_50C 0x50C #define REG_600 0x600 + +/*********************************************************************/ +/* Here are constants for values associated with the above registers */ + +/* I2C Trigger (Reg 0x200) */ +#define AU0828_I2C_TRIGGER_WRITE 0x01 +#define AU0828_I2C_TRIGGER_READ 0x20 +#define AU0828_I2C_TRIGGER_HOLD 0x40 + +/* I2C Status (Reg 0x201) */ +#define AU0828_I2C_STATUS_READ_DONE 0x01 +#define AU0828_I2C_STATUS_NO_READ_ACK 0x02 +#define AU0828_I2C_STATUS_WRITE_DONE 0x04 +#define AU0828_I2C_STATUS_NO_WRITE_ACK 0x08 +#define AU0828_I2C_STATUS_BUSY 0x10 + +/* I2C Clock Divider (Reg 0x202) */ +#define AU0828_I2C_CLK_250KHZ 0x07 +#define AU0828_I2C_CLK_100KHZ 0x14 +#define AU0828_I2C_CLK_30KHZ 0x40 -- 2.30.2